Can I replace my optical drive with internal blu-Ray player?

Basically what the question says. I have a MacBook Pro mid-2009, and I'm wondering if I can replace the optical drive with an internal blu-ray drive.  I would want to be able to read and write to regular CD and DVD still though, that's a must. Also, if there is an internal drive I can put in, will OSX Mavericks support playing a blu-ray movie just because my computer can read it?
Thanks for any knowledge or advice you guys can offer!

No.

Similar Messages

  • Can i replace the optical drive with a adapter to house an extra hard drive

    so i want to put one of these http://compare.ebay.com.au/like/321126164672?ltyp=AllFixedPriceItemTypes&cbt=y&_ lwgsi=y&item_id=321126164672
    will it fit and will my computer run faster if i have it ?

    It isn't going to do anything with the speed of your computer.  It will give you more storage so you can store more things, but nothing with the speed of the overall computer.  What would speed it up is to get a faster hard drive then the original one installed which can load data faster, however, putting in a second one isn't going to unless it was faster and you had the OS installed on that one.

  • Can I replace a 1TB drive with a 2TB

    I own a first generation Time Capsule with a 1 TB drive (6,106.) The light just started flashing amber and the message with Airport Utility is "Internal Disk Needs Repair." Assuming the drive has gone south, can I replace this 1TB drive with a 2TB one, or is there a BIOS restriction.

    It is just time.. the TC were designed to run too hot for the power supply to last.
    The fan should be running all the time as indeed they do in the new versions. The supply will be on the edge and in fact what you are experiencing maybe power supply.. it depends.. if yours is Gen1 with 1TB hitachi drive I have yet to see a dead drive.. lots of dead supplies.
    If you have Gen2 they changed to WD black.. and lots of the drives are dead.. the typical WD fail 3 spin ups and then nothing. Tell me if you have A1254 or A1302.. from the bottom rubber Mat top line.
    New Green drives are lower power consumption but due to their design of spinning down whenever possible they have a bigger motor for start up.. it pulls 2A at 12V and the power supply in the early TC cannot sustain it.
    So if you replace disk you really need to replace power supply.
    I have a lot of suggestions.
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
    And even repair kits.
    https://sites.google.com/site/lapastenague/time-capsule-power-supply-repair-kits
    But the design is fully explained.. so if you want to DIY you can.
    I have had several people come to me after upgrading the hard disk and finding it then didn't work.. due to power supply being on the edge and a replacement with external 12v supply fixes it.
    But is it economic.. ?? That is the question.. If you have a Gen1 with an hitachi drive it could be worth it. As the drive could still be good.. pull it out and test it.
    Otherwise buy a second hand Gen4 with 2TB drive already in it. They sell for around $180 here if you shop well. A Gen4 is cheaper than power supply plus hard disk repair for a Gen1 or Gen2 and you get 50% faster hard disk access with the same drive... (TC are processor bound and later ones have 50% faster processor) and better wireless. Or get a new TC.. which is a big jump in price but comes with full warranty.

  • (2011 13" Macbook Pro Model 8,1) I want to replace my 320GB HDD and replace it with a 6gb/s 120GB SSD. I also want to replace the optical drive with a 7200RPM HDD 750GB.

    I want to use:
    The SSD and enclosure to replace the optical drive with the new HDD
    So basically, I want to use the SSD in the link above. I want to set this up as either preferrably a fusion drive. If not the smoothest most stable configuration. I have a Macbook Pro Early 2011 13" with 8 GB of ram, 2.3 GHz Intel Core i5, 320GB HDD.
    I want to install the SSD directly to the SATA port where the 320 GB HDD is currently. I then want to install the new HDD, preferrably a name brand 750 GB 7200RPM hard drive where the optical drive is now. I want the storage to work in a way in which the OS, and my most used programs and files get stored on the SSD, and everything else gets stored on the larger hard drive. My most preferred method would be Fusion drive, or a SPAN drive.
    I would like to use a Seagate Momentus XT, but I learned that there might be issues with compatability with this. I dont mind using the 3 gb/s 500GB option, but would like to know if it would even be smart to do it. I also have no problem settling for a regular 7200 RPM hard drive.
    I have read a bunch of stuff online but I still am not sure if this is even possible. I want my machine to run as fluid as possible so any info would be appreciated.

    bump

  • Can I replace my combo drive with a superdrive??

    hello all,
    Can I replace my combo drive with a super drive? I see on some of the tech do it yourself pages the G5 17" original imac is supported for changing it out by your self. but how do I go about buying the superdrive...and from whome??
    thanks,
    marc

    As to the DIY installation...I purchased an OWC Mercury 8x dual to replace my combodrive, but the installation directions that everyone refers to on the apple support site says nothing about removing the mounting cage to use in the replacement installation. Am I missing something here? Sure, I can remove the three mounting screws that holds the cage to the drive, but then I'm left with the welded bracket that does not seem to want to move. OWC support was no help at all. Is there a trick to this?

  • Can I replace the optical drive on a 2010 mac mini with a second hard drive?

    i was just wandering how easy it would be (if at all) to replace the optical drive on my 2010 Mac Mini with a second hard drive
    we use it as a media server only, and the DVD is almost never used

    http://eshop.macsales.com/shop/drive_bracket/datadoubler/

  • Can I replace my CD drive with a 1.8 inch SSD?

    I recently bought the OWC Data Doubler that replaces the CD drive with a 2.5 inch hard drive. http://eshop.macsales.com/item/OWC/DDAMBS0GB/ My initial plan was to put in a regular hard drive but my external SSD's usb plug broke off and I'd hate to throw out an otherwise good drive. It's a 1.8 inch micro SATA so it would be too small normally. (pic for reference http://i.imgur.com/FAwFBZq.jpg ) So I guess my question is: Is it still possible to use my SSD and can I somehow fit it in the Data Doubler instead of another hard drive?
    Links to things I can buy would be helpful.
    Thanks to anyone who can help!

    This link has enclosures and adapters for 1.8" HDDs.  Perhaps one of these items can put your 1.8" HDD back into operation:
    http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH &Description=1.8"+SATA+drive&N=-1&isNodeId=1
    Ciao.

  • Have you replaced your optical drive with a second hard disk?

    Hi guys,
    I am currently thinking about replacing my optical drive in my MacBook Pro for a 256 GB SSD, as my main hard drive is getting filled up.
    Have you replaced the optical drive in your computer, and what is your experience? I'm looking at either OptiBay or OWC Data Doubler. Which would you recommend?
    Thanks!

    Actually I'm about ready to do this myself.
    I installed a SSD in my Windows 7 desktop PC about 9 months ago and the difference is just amazing.
    I bought a new Dell Latitude and got it about a week ago, very fast but not as fast as my desktop. I then ordered a modular bay hard drive enclosure to replace the optical drive and another SSD. Installed the drive I had as my boot drive, a 750GB 7200RPM drive, in the modular bay enclosure and installed the SSD as the main boot drive. System screams.
    I then look at my MBP late 2011 with i7 CPU and the 5400RPM drive that comes with it. Slow comparatively.
    So I've been hunting around and I think I've settled on the Optibay as it comes with a optical drive enclosure and the proper cable to connect that drive to a USB port.
    I will mount the SSD in the optical bay caddy and make that my Boot drive leaving the original HDD where it is as the mounting system for it has shock absorbers. The SSD I will get willl be the 6GB type as but the main SATA port and the optical bay port are both 6GB.

  • Can I replace the DVD drive with a BlueRay Burner?

    I have the HP Pavillion a6647c. I assume so but don't know if it takes more power. I learned from an ealier lost I can't really upgrade my video card as my power supply isn't strong enough. 230W I think.
    Just incase some knows this answer too......my goal is to burn my HD movies off the hard disk and on to blue ray disks. Currently the playback of the movies on the PC is a bit jerky and I've been told by Canon I need a better video card. Will a movie I burn to a blueray also be slightly jerky on my TV through my blueray player or is it just when played on the PC?
    Thanks

    Hi,
    Welcome to the HP Forum!
    pszwec wrote:
    I have the HP Pavillion a6647c. I assume so but don't know if it takes more power. I learned from an ealier lost I can't really upgrade my video card as my power supply isn't strong enough. 230W I think.
    Just incase some knows this answer too......my goal is to burn my HD movies off the hard disk and on to blue ray disks. Currently the playback of the movies on the PC is a bit jerky and I've been told by Canon I need a better video card. Will a movie I burn to a blueray also be slightly jerky on my TV through my blueray player or is it just when played on the PC?
    Thanks
    Yes,  you can update the DVD burner to a Blu-ray buner.  A movie that you have burned to a Bluray disc should play smoothly on your Blu-ray player. Your PC and your Blu-ray player are apples and oranges. 
    Kind regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Replacement of Superdrive with internal Blu-Ray Rewriter?

    I have an older Mac (Mid-2007) and I wanted to change the pre-installed Superdrive with this Blu-Ray internal rewriter, http://www.aliexpress.com/item/New-Arrival-100-Original-Slot-Load-BD-DVD-Rewrite r-UJ-225-PATA-Blu-ray-disk-Burner/168556
    But I believe that the Superdrive is 9mm, would this work, (as the drive is 12.7mm).
    Any help is appreciated, Thank You

    To my knowledge Apple Mac OS X does not support Bluray at all. There may be an aftermarket program you could use but I'm not sure.
    Also I doubt you will find a BR drive that will fit inside the space allotted for the Superdrive.

  • Internal blue ray player?

    Is there an internal blue ray available for my macbook pro? Or software to play a blue ray disc?

    No, there is no way to play a Blu-Ray disc in the MBP's internal drive, and I haven't heard of any internal Blu-Ray drive replacement option. The best you can do is an external drive and some third-party software that, last I heard, was new and still a little wobbly on its pins. See "more like this" at right.

  • Share files on Time Capsule with wireless Blu Ray player?

    We're looking at getting a Blu Ray player with built in wireless to take advantage of Amazon Prime streaming and Hulu Plus. Star Trek; TNG remastered on Bl Ray also promped me in this decision!
    We already have an AppleTV and tried jailbreaking to get access to Hulu and Amazon, but the hack caused numerous issues, so back to stock it went.
    I have also started ripping all of my DVDs and importing them into iTunes, but with a baby in the house it's REALLY an issue to always have a laptop open and running whenever we want to watch one of our movies. I've looked at a number of Blu Ray players that include DLNA capabilities, plus file sharing via SMBA and UPNP. My question is, will the Time Capsule serve up those files to the player? I tried DLNA shares directly through our Samsung HDTV before and it just did not work.
    Does anyone have experience with a make/model of Blu Ray player playing nicely with a Time Capsule and/or an additional storage device attached to a Time Capsule?
    I have also read that I absolutely, positively do NOT want to go wireless, but to use Ethernet instead. Our TV is clear on the other side of the house from the modem/Time Capsule so I'd have to pull at least 100 feet of cable to make that happen. I don't think there's any conduit into the attic at the front of the house either, since the cable box comes in in from the exterior wall, so it could be a real job. Any thoughts on that?

    There are no media players in the TC whatsoever.. it is completely dumb box.. and is unsuitable as a media centre.. it is not even a file store, as it has no way to back itself up.. it is a backup target for Time Machine.
    If you want DLNA you need to run a computer of some sort and use a player that can read the files and play them directly.. ie no streaming.
    On the wireless to other side of the house, I do think you will have issues. Ethernet is still far superior solution and if you own the house consider it an investment in future usage.
    But for now Ethernet Over Power adapters can offer superior performance to wireless and far better reliability. They are not without issues, so buy from store that offers no questions asked return.. and don't bother too much with super fast ones.. the 200mbit/s are already well above what is reality. You cannot use them on power boards generally so you also might need to think of ways around that.
    If you do get stuck with wireless the TC is slow.. 2.4ghz is only 130mbps.. and range is not great. I would recommend a different device like ubiquiti router that offers high power and long range.

  • How do I use my Airport Express with a Blu-ray player?

    Hello, first post, long time lurker. Have a question, hope someone can help me
    I have an Airport Express V 6.3, currently I have it set to 'Join a wireless network' and its connected wirelessly through a Netgear router that is located on the 1st floor, I'm on 3rd floor by the way. I've been using it for airtunes, but I recently received a Sony Blu-ray Player and would like to connect it the airport express via ethernet cable.
    What do I have to set up on the airport express to be able to give the blu-ray player internet?
    I've noticed many threads here about airport extreme connected to express...so they weren't too helpful

    Welcome to the discussion area, mareithree!
    You'll need the 802.11"n" version of the AirPort Express to be able to "Enable ethernet clients" and connect the DVD player. Unfortunately, your older version of the Express does not allow this type of feature.

  • Can I replace the optical drive in my iMac with a 2.5" HDD?

    mid-2007 Intel-based iMac
    optical drive is shot
    cant install winxp on bootcamp without it
    thought it'd be easier to have a separate (already windows-formatted) drive (pulled from my laptop) and choose to boot to either at startup.

    possibly, but you need an adapter like this for example: http://eshop.macsales.com/item/NewerTech/ADPTADRV/
    Message was edited by: shldr2thewheel---not sure about how this would work with putting it in the optical drive slot.  It should work if put in the spot reserved for the HDD.

  • Can I Replace My OS Drive With A SSD?

    I currently have 4 drives in my Mac Pro Tower and would like to replace them all (including the OS drive) with SSD's. Can I?
    TIA

    If you want to look at your options, I'd first consider the 10K VelociRaptor before dropping couple thousand. Also you have an open lower optical drive bay, then use the ODD ports on the logicboard for two drives.
    http://www.barefeats.com/hard103.html SSD vs others
    http://www.xlr8yourmac.com/IDE/SSDvs_VelociRaptor_vs_Raptor/SSD_vs_VelociRaptorRaptor.html
    http://www.barefeats.com/harper14.html - cheap, fast, cool temps.

Maybe you are looking for