Can I replace my router (9100EM)?

I have the 9100EM router and would like to replace it with NETGEAR - N750 Dual Band Wireless-N+ Gigabit Route. Is this possible and if not what can I replace it with that will give me better wireless coverage in my house?
Thanks, Mark

mreggers wrote:
I have the 9100EM router and would like to replace it with NETGEAR - N750 Dual Band Wireless-N+ Gigabit Route. Is this possible and if not what can I replace it with that will give me better wireless coverage in my house?
Thanks, Mark
If you replace the VZ router with your own Netgear router you will lose the stb guide, dvr remote access etc.  If you don't have tv service then sure it's OK.
Otherwise look at these links for other options.
What are the tradeoffs between the various router configurations
Can I use my wireless or an extra router along with the Verizon provided router?
Do I have to use the supplied router with Verizon FiOS?
Personally I just connected my own router from a lan port on the VZ router to the wan port of my router in a different part of the house and run all my in house machines on the gigabit and wireless-n subnet that it provides.

Similar Messages

  • Net down, can't login to router, lights normal on 2nd pc (1st works fine)

    I have had a PC installed with FIOS and working perfectly (wire connection, windows xp, m1424-wr router).  I have brought in a newer upgrade PC tower (vista 64 home) that has had internet working fine just recently, but cannot get it to work with FIOS and my router.  I do not run both PC's at once, just one at a time and will replace the other one once this is setup (one monitor).   I have an IP address assigned and packets are sent and received, but I cannot access the web or even login to my router (manually or using FIOS's wizard software).   It is set to auto obtain an address and DNS.  I can log into the router on the old computer that works, and using the same login/password combo on the 2nd computer it fails.  I am using the same cable, and all lights on the router and the pc NIC are on.  Safe mode with networking provides no change
    Any ideas what the problem is?  The computer has been working on another network just fine a day before I tried setting it up at a new location with FIOS, but it seems like it is rejecting the connection somehow. 
    Message Edited by Jay814 on 08-01-2009 08:52 AM

    I have an IP address assigned and packets are sent and received, but I cannot access the web or even login to my router (manually or using FIOS's wizard software).   It is set to auto obtain an address and DNS.  I can log into the router on the old computer that works, and using the same login/password combo on the 2nd computer it fails.  I am using the same cable, and all lights on the router and the pc NIC are on.  Safe mode with networking provides no change 
    This is an interesting one. Let me see if I understand your post correctly. You see that the new computer is assigned a proper address on the network, and you are able to view the router login page from the new computer. However, entering the router logn/password from the new computer fails to access the router, and you do not have access to the internet. Is that correct?
    If so, when you try logging in to the router from the new PC, how exactly does it fail?  What is displayed on your screen?

  • Can I Replace or Extend the Fiber Optic Cable?

    There is a cable that runs from the Verizon box outside of my house, comes into the basement corner  of the house, and plugs into the router.  Do I assume this is fiber optic cable?  This cable is about 3 ft long which is problematic in getting a good signal throughout my house.  I would like to move the router up one floor.  All the other cords and cables are long enough to do so.
    My question is what is this cable called and can I replace it or extend it myself?  If so, is there any pertinent information I would need to know to do so such as part names and where to get them.  If not, how do I get a longer cable installed.
    I am not tech savvy and grateful for any help. 
    Solved!
    Go to Solution.

    rebeccajeanne wrote:
    Do I assume this is fiber optic cable?  
    No.  The fiber optic cable attaches to the Optical Network Terminal (ONT), which is usually outside.
    For speed tiers < 100Mbps, the installation is usually coax from the ONT to your router.
    For speed tiers > 100Mbps, the installation is always ethernet from the ONT to your router.
    If the cable from the ONT is indeed an ethernet cable, you can certainly replace it.
    The ONT has a standard RJ45 jack which the other end of the cable is connected to.
    You can confirm if you're connected  via ethernet in two ways.
    1)  The WAN ETHERNET light on your router should be lit and the WAN coax light should be off.
    2)  The ethernet cable should be connected to the white WAN port on the back of your router.
    Since your ONT is outside, replacing the ethernet cable presents a couple of problems..
    1)  When VZ installed the cable, they passed it through the wall, then sealed the opening with silicone.
    You need to make sure you can fit a preterminated cable through that opening unless you're capable of terminating a cat5 cable yourself. 
    2)  You need to reseal the opening with silicone.
    An easier option is an RJ45 coupler.
    http://www.amazon.com/Britta-Products-RJ45-Coupler-F-F/dp/B000BSLW8U
    rebeccajeanne wrote:
    Can Verizon replace it for a longer cable?  
    Yes, but they will charge you a truck roll to do so.  $88 or so.

  • WET 610N Cannot Connect after Replacing the Router

    Hello,
    WET610 has been working flawlessly with the old router.  Upon replacing the router however, I tried to set it up as was before by using the CD that came with WET610N.  I keep gettin the error 107.
    I would appreciate any and all suggestions.  Thank you all in advance.

    I’m not that familiar with error 109 but I believe it has something to do with the setup cd being corrupted. Good thing is that there is an option to setup the bridge manually. These links will guide you on how to setup the bridge manually: Manually configuring a Linksys Wireless-N Bridge to work with an access point and Configuring a Linksys Wireless-N Bridge through the web-based setup page. Before reconfiguring the settings of the bridge, make sure that the bridge has been reset to factory default settings (push and hold the reset button for 30 seconds then power it off for another 30 seconds; once the power light is solid, you can start the manual configuration).
    Other links for WET610N:
    WET610N Frequently Asked Questions
    What is a wireless bridge and how to use it

  • Can I replace my 802.11b Aitport card ?

    Can I replace the older 802.11b Airport card in my Titanium G4,OSX 10.3.x, with a newer "g" or "n" card so that it will connect to a new netgear router? And where should I go to purchase one if it's possible?

    Can I replace the older 802.11b Airport card in my Titanium G4,OSX 10.3.x, with a newer "g" or "n" card so that it will connect to a new netgear router?
    Any compatible 802.11g or 802.11n cards will be PC Cards or external components such as the AeroPad mini. The internal 802.11b card isn't upgradable.
    (55221)

  • How can I replace just the corrupt page(s) in the domain file of iWeb using Time Machine?

    I back up with Time Machine and have an extensive elaborate website I created in iWeb '09 over a couple months and publish to a local folder and then upload to my server, but in the last few days I notice certain pages (that I haven't even worked on or touched) somehow become corrupted or "cross-contaminated" with elements and images from other pages.  Once I see they are corrupt I make sure not to publish them (if the current published versions are the correct, non-corrupt versions) or if they did get published I can use Time Machine to retrieve the .html file and page files folder for that specific page and replace it in my published folder/server so it shows correctly on the Web.  However, that does not replace the corrupted page(s) you see and work with when you launch iWeb and try to edit or continue working on that page.
    I am confused as to how I go to the package contents of the domain file and replace just that page with a previous version from time machine.  I don't want to replace the entire domain file because I have new changes I made to other pages even in the past hours.  How can I keep the good pages and just get earlier, non-corrupted versions of the corrupt page(s)? I know it's not as easy as with the published site folder where you can just replace the page's .html file and folder, but I don't want to have to re-create the corrupted page(s) from scratch or have to replace it with the last non-corrupted domain file and then have to redo all my recent changes to new pages I made before discovering the corrupt page(s).  Thanks for your help as now I can't make changes to the page(s) within iWeb itself.

    Thanks for the response, Wyodor.  I don't know what that is, but I'll have a look.  Is it an alternative to iWeb or a way to transfer pre-existing iWeb sites?  When you say merge domain files, is that like so multiple copies of the same site show up then you can pick and choose the non-corrupted pages and group them then delete the corrupted ones?  I am on Snow Leopard with no plans or need to upgrade anytime soon.
    And yes, I will read your links but just wanted to ask those questions.  Maybe they'll answer my questions, maybe not.
    I was able to discern that within the domain file is a domain folder with all the site folders, each with their own page ".gz" files which expand into ".xml" files.  I was trying to figure out if you could simply drag the corrupt pages out that way and replace them with backup copies that are still good.  I am having trouble discerning which pages are which as they all have random names like site-page-30F175E3-AE33-4F10-A490-1A096D9B185B.xml and although I expanded and opened each in Text Wrangler, I still couldn't discern which were which for sure, and trial and error proved cumbersome.  Also, I did notice some of the later corrupted domain files had one or two more pages than the site itself has, so not sure how they got added or duplicated or what.
    Again, I'll look at your links, but do you know about swapping out individual page .xml files this way within the domain file?

  • Is there any way to replace my iphone 5. The back camera is not working. Since there's no apple store here in the philippines. How can i replace it?

    How can i replace it?

    You probably do in NZ ..................
    The Apple iphone warranty is not and never has been from the very first iPhone, international
    Sorry but you were stitched up

  • I can't replace an old version of Firefox with a new one that I just downloaded. It says I don't have permissions to do so, and the old version can't trashed.

    I've downloaded the new version, and when I go to drag the Firefox icon into the Applications folder, I'm prompted to replace the old version. When I do, it says, "The operation can’t be completed because you don’t have permission to modify 'Firefox'." I've looked everywhere, and every help forum says to just drag Firefox into the Trash. I've tried that, and it says that Firefox can't be trashed. I don't know if this means anything or not, but there is a small lock in the bottom left of the Firefox icon in my dock.

    Try to drag the current Firefox application to the trash if you can't replace it.

  • Can i use one router connected to my cable modem and another....

    can i use one router to connect to my cable modem them have another (not connected to a modem) and a wireless reciver so i can plug my xbox 360 into it?

     Yes you can do that ... but you need to configure the computer connect to the Router using Cable ....
    Afterwards ... you can work on mutiple computers ...

  • How can i replace my new iPad mini to ipad air

    how can I  replace my new iPad mini to a new iPad air online

    If you bought the Mini within the past 14 days you can get a refund and buy the Air. Take it to an Apple store.
    Otherwise.......
    Your only option is to sell the iPad and buy a new one.
    Apple Reuse and Recycle Program
    http://store.apple.com/us/browse/reuse_and_recycle
    How to Sell Your Old iPad  http://tinyurl.com/85d69lk
    Other sources to sell.
    eBay Instant Sell http://instantsale.ebay.com/?search=ipad
    Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
    For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
    Sell Electronics for Cash - Next Worth  http://www.nextworth.com/
    Buy My Tronics  http://www.buymytronics.com/
    Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
    Totem http://www.hellototem.com/
    How To Sell Your Old iPad: 5 Places To Trade In Your Old Device
    http://www.huffingtonpost.com/2013/11/05/ipad-trade-in_n_4218964.html
    THIS IS VERY IMPORTANT - What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
     Cheers, Tom

  • How can I replace an administrators account?

    I have an older Powerbook G4 laptop that someone else would like. How can I replace the adminsitrator's account?

    Hi Bob,
    2 ways to go...
      1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
       3. Click the Erase tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion do a new install.
    Or...
    Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
    In the same pref pane highlight your old account, click the little minus icon, then use Disk Utility to Secure Erase Free Space.

  • How can I replace the cursor in the below query?

    I have this below query which calls a stored procedure that takes only 1 item's attributes at a time. But because of performance problems we are
    required to remove the cursor. How can I replace the below cursor logic with set operations or CTE? Please advice.
    DECLARE db_cursor_ava CURSOR
    FOR
    SELECT t.[agent-id],
    t.[start-date],
    t.[end-date],
    t.[monitor-days],
    t.[monitor-start],
    t.[monitor-end],
    t.[timezone-offset]
    FROM @tmpAgentPeriodTimeRange t
    OPEN db_cursor_ava
    FETCH NEXT FROM db_cursor_ava INTO @agentID_ava,
    @stDateTime_ava,
    @endDateTime_ava,
    @monDays_ava,
    @monSt_ava,
    @monEnd_ava,
    @offset_ava
    WHILE @@FETCH_STATUS = 0
    BEGIN
    DELETE
    FROM @tmpMonitorPeriod
    DELETE
    FROM @tmpFinalResult
    SET @runID = 1
    IF(@endDateTime_ava>DATEADD(MI,@offset_ava, GETUTCDATE()))
    BEGIN
    SET @endDateTime_ava=DATEADD(MI,@offset_ava, GETUTCDATE())
    END
    INSERT INTO @tmpMonitorPeriod
    EXEC core.usp_GetMonitoringPeriod
    @startDate = @stDateTime_ava,
    @endDate = @endDateTime_ava,
    @monitoringDays = @monDays_ava,
    @monitoringStart = @monSt_ava,
    @monitoringEnd = @monEnd_ava
    SELECT @maxID = MAX(tm.id)
    FROM @tmpMonitorPeriod tm
    FETCH NEXT FROM db_cursor_ava INTO @agentID_ava,
    @stDateTime_ava,
    @endDateTime_ava,
    @monDays_ava,
    @monSt_ava,
    @monEnd_ava,
    @offset_ava
    END
    CLOSE db_cursor_ava
    DEALLOCATE db_cursor_ava
    mayooran99

    You've been down this path before  - and the response is exactly the same.
    how to replace cursor logic
    And I'll suggest that you post the entire code - since you repeatedly delete 2 table variables but only populate one. The setting of @maxID also seems to have no purpose. And perhaps the issue here isn't the cursor but the general approach.  Who knows
    - but it appears you may have prematurely assumed that the cursor is the problem.

  • Can I replace my current iPhone 5s with a new one in this case?

    I just got my iPhone 5s two days ago, but it already has problems when I was trying to text with it while charging. The phone was doing all these random things like mis-sensed my typing really badly, jumping out to the main screen and even called the person I was texting. I even tried typing messages in Whatsapp, it constantly hides the keyboard from time to time and that's really irritating. While it's on lock screen, I could not slide to unlock it, I had to use my finger scan to access my phone in the end. The phone went normal again once I got the charge unplugged, but it went crazy again once I got it plugged in. I truely believe it's something wrong with the phone rather than the charger. Can I replace my current phone with a new one in this case?

    Take it back. This is a warranty/purchase issue. We are just users here.

  • How can I replace my old print driver with my new printer driver on 13

    how can I replace my old print driver with my new print driver on photo elements 13

    The print driver is not installed in PSE.
    Check with the manufacturer of your printer.

  • I have an iphone 5 that i trade with a family member they have coverage on it. now the iphones sleep wake button doesnt work sometimes can apple replace my iphone even if i dont have the box or recipit to the product or can they just repair it?

    i have an iphone 5 that i traded with from a family member. its has coverage but now the sleep/wake button doesnt work sometimes. can apple replace my iphone and give me a new one or is it just something they can repair? i dont have the box or recipit to apple care or the iphone

    Apple can fix it without your receipt or box. They pull the serial number from the device and determine warranty status from that.  Hopefully ApplCare was registered to the product before you lost the receipt though.  If not, you can go back to the point of purchase and obtain your AppleCare receipt and Apple can help attach it to the iPhone.

Maybe you are looking for