Can I replace parts in a Z60t with parts from a A20M?

Hi y'all
I have 2 broken Thinkpads --a Z60t (2511 E7U) and an A20M (2628 3CU.)  The A20M basically died of old age, but still has a hard drive and battery that I'm fairly sure are in working condition. The Z60t was given to me by a friend, and ostensibly has no problems except that it does not have either of these parts. My question is, would it be possible for me to swap the hard drive and battery from the A20M to the Z60t?  
Honestly, my ultimate goal is just to have a working laptop so that I can futz around on the internet without having to sit at my desk. I'm not all that concerned with how powerful or cool the thing is.  That being said, any advice or alternative options to the above scenario (that wouldn't require me to spend a lot of money) would be much appreciated.  Thanks

You need a 9.5mm SATA laptop drive, a proper battery and AC adapter. If you're lucky, you can source all of that for $100-120 on fleabay.
Adapter is 20V, either 65 or 90W, just to prevent any confusion.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • Can I replace my A1226 model keyboard with one from a model A1260?

    My A1226 keyboard has dead keys, somebody is parting out their A1260--Can I replace my keyboard with theirs?

    Well, you didn't mention what hardware was involved.
    It's difficult to know if laptop keyboards are interchangeable between different models. Typically the keyboards are made for the computer so unless the keyboards are exactly the same they may not be interchangeable. You can give it a try. You could also contact ifixit.com to see if they know.

  • How can I replace my old print driver with my new printer driver on 13

    how can I replace my old print driver with my new print driver on photo elements 13

    The print driver is not installed in PSE.
    Check with the manufacturer of your printer.

  • Can you replace a powermac g5 mbd with and Intel mbd?

    Can you replace a powermac g5 mbd with and Intel mbd?

    I think you would have to do a lot of work in addition to just replacing the motherboard. Like getting a new power supply for instance as the cables won't match what Apple specs for their designed and built hardware. I think the best you can hope for is to reuse the Aluminum tower case, and that's about it.
    Some links related to this:
    http://hintsforums.macworld.com/archive/index.php/t-96460.html
    http://forums.macrumors.com/showthread.php?t=652438

  • How can i replace the standard ESS iview with my own iview

    I want to replace standard ESS addr iview with my own WD developed by ABAP
    I added the iview(my WDA) into standard ESS addr page.
    (pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.cn/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr)
    And make it visible.
    But I got this error in ESS PA addr :
    WebDynpro Exception: Application PER_ADDRESS_CN Does Not Exist
    Here is the error code :
    Error code：ICF-IE-http-c:100-u:AC_WANGFZ-l:1-s:CE1-i:SAPCE101_CE1_01-w:0-d:20070514-t:172301-v:RABAX_STATE-e:UNCAUGHT_EXCEPTION
    So , how can i replace the standard ESS iview with my own iview?
    Thanks

    Can you see any Javascript EPCF code in the old iView  ?  You are surely just going to have to find it  (if our hunch is correct) and analyse it and copy it into your new iView so that it functions in some way that at least does not error

  • How do I replace data on my PC with data from iCloud?

    How do I replace data on my PC with data from iCloud?

    This long article covers all types of transfers, including moving to a new computer: http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

  • How can i replace parts of my laptop with better parts

    I got a HP pavilion G6 . And i dont have the money to buy a new pc, so my question is, can i replace some parts with better ones, so i can have a better game expierience. And are there ways to boost my FPS? 
    Thanks 
    Niels

    Nielsdg wrote:
    I got a HP pavilion G6 . And i dont have the money to buy a new pc, so my question is, can i replace some parts with better ones, so i can have a better game expierience. And are there ways to boost my FPS? 
    Thanks 
    Niels
    NO. You will have to spend a good deal of money to get a high FPS machine and those aren't cheap to get.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Can I replace my current iPhone 5s with a new one in this case?

    I just got my iPhone 5s two days ago, but it already has problems when I was trying to text with it while charging. The phone was doing all these random things like mis-sensed my typing really badly, jumping out to the main screen and even called the person I was texting. I even tried typing messages in Whatsapp, it constantly hides the keyboard from time to time and that's really irritating. While it's on lock screen, I could not slide to unlock it, I had to use my finger scan to access my phone in the end. The phone went normal again once I got the charge unplugged, but it went crazy again once I got it plugged in. I truely believe it's something wrong with the phone rather than the charger. Can I replace my current phone with a new one in this case?

    Take it back. This is a warranty/purchase issue. We are just users here.

  • Can I replace an older Airport Extreme with a newer one by importing configuration file

    Can I import the configuration file from an older Airport base station into a newer replacement Airport base station?  It would seem this would save me a lot of extra work.  First, it would hopefully save time by automatically configuring the new base station without me having to fiddle with the settings.  Second, it might hopefully save some more time if I would not have to re-enter the network parameters for all the devices currrently connected to my Airport (wi-fi) network.
    Read on for more details.
    My old Apple Airport Extreme Base Station (AEBS) is not a gigabit one.  Moreover, it's been experiencing some hardware failures recently.  So, I recently purchased a new Apple Airport Extreme (base station) that is a gigabit one (Model# ME918LL/A with 802.11ac Wi-FI).  Now, I'd like to replace the older base station with this newer one with the MINIMAL amount of disruption and manual work possible.
    Regards,
    Tony

    I relaced an older AEBS with the new one, recently, and did not need to import anything, but if you can save the configuration file from your old one, then you can import it to the new one. I've never tried that when I switched, and it didn't seem to matter which suggests the configuration file may be on disk somewhere.

  • Can I replace my Matshita CD drive with a superdrive?

    I just purchased a G5 and was thrilled when I saw how easy it would be to transfer all of my old home video to dvd using imovie and idvd, however when I went to complete the first project my machine informed me that I would not be able to burn a DVD.
    Can I replace my current drive with a superdrive?
    If not, can I use an external burner?
    Message was edited by: robsclean

    You should run System Profiler to confirm it is not a superdrive. Only a few models of the iMac G5 had a combo drive.
    You can get an external superdrive. OWC has some.
    http://eshop.macsales.com/shop/firewire/optical-drives/
    A drive with FireWire may provide better performance.

  • How can I replace the old commenting system with Disqus?

    How can I replace the old commenting system on Business Catalyst with Disqus? Please help

    Hi,
    The Disqus integration has been done by at least one BC partner – simpleflame.com, on this site: http://kiyuco.com/free-videos . You could reach out to them inquiring for more details on how it has been done.
    Kind regards,
    -Sidney

  • Can i replace logic board  mid 2010 with logic board 2011 as newer

    i have macbook  mid 2010  cor to duo 2.66 my logic board damged can i replace my logic board with newer  last 2011  2.3 core i5

    mende1
    The port placement is completely different on a 2010 model and a 2011 model, so the user wouldn't be able to replace it at all.
    Clinton

  • Can I replace the Inspire 5500 decoder with a DDTS-100

    Hi,
    All I want to do is replace the decoder that comes with the Inspire 5.1 Digital 5500 set with a DDTS-100, and continue to use the same speakers. Is this possible?
    The only thing I can see preventing this is that at the moment the the sub and the decoder have to be connected via a din socket (for control and power), but there is no din input on the DDTS-100. Will this be a problem?
    Thanks in advance.

    Google is a wonderful tool... Tried it's
    http://www.hardwareluxx.de/akaspar/r...s00/back_s.jpg
    Message Edited by rico01 on 08-17-2005 05:09 PM

  • How can I replace one low quality source with another high quality one ?

    Am I really this dumb or is it really this hard ?
    I have one timeline / project / edit that essentially references one long source clip / event / file.
    I have a newer higher quality transcoded version of the same source and want to replace the original lower quality version and end up with the same edited result just with better quality images !?
    It's the same frame rate and image dimensions  but "relink" tells me the new file is not "similar" enough and won't do it !
    Why is this so hard ? Is there a way to export a good old fashioned edl and then just reconform using the new source ?
    What if I wanted to to replace low res offline footage with finished colour-corrected material and output a finished master - would that be this clueless as well ?
    Please let me know the problem is between the chair and the keyboard - not between the hard disk and the power cord !

    Guessing that when you created the higher quality media, it was done outside of FCP and probably changed some important metadata that the app is looking for. Or perhaps there is a difference between the original audio and the new audio.
    Anyway, Luis' advice about the replace edit seems like the easiest solution.
    a_mumford wrote:
    What if I wanted to to replace low res offline footage with finished colour-corrected material and output a finished master - would that be this clueless as well?
    The usual way to do offline online is within FCP – creating the proxies and then using Preferences to switch back to and from.
    If you sent it out for grading, the Relink should work fine. If you haven't seen this kb doc, it's worth reviewing.
    Russ

  • Can I replace a published muse site with one I have been working on?

    I have published a muse site as a holding page on a webasics plan, and while that has been live I have started a new muse file an built a website which I intended
    to replace the holding page with.
    I am having trouble figuring out how to replace a already published site with a new muse file?
    Hope that makes sense!
    Thanks heaps

    Hello,
    You simply need to select the same site from the list of sites in the dropdown, while publishing it from Muse. This will replace the existing site with the one you have built in Muse now.
    Hope this helps.
    Cheers
    Parikshit

Maybe you are looking for

  • RUN Time error while use filter table in query generator

    Hai..                I have 2 Functions under "Scalar valued functions" in SQL Server,i try to call this functions in Query generator its working fine,result also display correctly, but i click filter table system showing  Error Message " Run Time Er

  • How do I read in audio data from the line in port?

    I would like to use the "line in" port to acquire audio signals for processing, however I can't determine which "device" number to use. I've determined that device 1 is my microphone jack but I can't get anything to work for the "line in" jack. Is th

  • URL in Smartforms

    HI all, I've downloaded the output of a smartform in PDF format. In the layout i've inserted URL for a text element. My requirement is, when user clicks the text, it's to link with one more transaction. How to do the same? Expecting reply...Urgent

  • How to made a login to be saved on database

    I'm new in JSP. And I really need a help with this one. Suppose i made a login ( include password and name ) in JSP 1. how to made a database that save the name and password with JSP? 2. how can I save the login ( Pass and name ) in the database so I

  • I have all the documents, but can't locate my discs - need iphoto and can't get without the original.

    I have all the documents, but can't locate my discs - need iphoto and can't get without the original.