Can I replace the audio input connection point on a macbook 1.1?

Hi, I have a macbook 1.1 and am recording on to it via audacity but it is picking up interference and I think I need to replace the audio input which is causing the problem. Is this something that is possible to do?

When you try and purchase Logic Pro X.. the Mac Store App will tell you if you can or cannot install it on your Mac.
For Ableton Live, ask Ableton...
FL11.. there isnt a native Mac version... though you can run it in Windows on a Mac via Bootcamp.. but not in OS X itself.
http://www.flstudio11.com/mac-version/

Similar Messages

Can you replace the audio of a clip?

I'm trying to replace the audio of a clip. I know I can easily delete the audio once it's in a sequence, but I'd like to replace the audio entirely so that the new audio is always on the clip as it's viewed in the project bins. You can edit in Audition for the clip, but thre doesn't seem to be a way to save the changes.

There are several way to do this;
Replace with clip...
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d27a .html#WSA009AFF1-4D78-43cc-B60D-5B46E5ACB117

How can I replace the audio in my iMovie 11 project with one I import frome elsewhere?

In the old imovie you can separate out the audio track, mute it, delete, replace it with one you prefer -- and easily make it line-up with the video, for example of a concert performance. Anyone know how to (even if by work-around) do the same with iMovie 11??

Do the following:
Download the app My Contacts Backup to your phone. Us the app to back up the contacts on your phone as a vCard attachment to an email that you send to yourself.
Delete your iCloud contacts by going to iCloud.com from your computer, log into your iCloud account and open Contacts, click on All Contacts on the left, to the right click on any single contact to select it, click on the Actions (gear shaped) icon at the bottom left and choose Select All, then press the Delete key on your keyboard. This will delete the contacts from your iPad as well.
Open the My Contacts Backup email on your iPad and tap the attachment to import the contacts from your phone to your iPad, and to iCloud. Go to icloud.com and confirm that they appear there as well.

Can I set the audio INPUT to my pre-amp, and audio OUTPUT to the built in?

I am using Logic Express 7. I want to set the audio input to my Firefox pre-amp, but set the audio output to my computer's built in speakers. I want to essentially record into the pre-amp and listen to the playback through my speakers. I can easily do this in GarageBand, but haven't found a way in Logic.

The remaining problem I'm having is when I record into an "Audio" track via my microphone which is plugged into the Firebox, I'm still only hearing the playback from the Firefox headphone jack, not the computer's built in speakers.
Did you select your new aggregate device in Logic's audio preferences? If so, then the problem is probably with your settings in the control panel which controls the Firebox - I don't use it, so I don't know what it's called, but it controls the routing and monitoring for the Firebox. Check the Firbox manual - there are probably two settings, one for playback and one for direct monitoring when tracking.

How can I replace the audio of an embedded video?

Hello,
I was hoping that you all out there may be able to help me. : ) I have an embedded training video in my captivate project and I would like to replace some of the audio in this video. As you would probably expect, when I add additional audio to the slide, the user hears not only this additional audio, but the video as well. Is there a way to "mute" the video, or cut out that portion of the audio so that the user only hears the secondary audio source?
Thanks for any help!!

You'll need to open the video in a video editing app and remove the audio you do not want to be heard. However, trying to accurately synchronise audio added to the slide with some gap in your video will likely be next to impossible. Your video starting point will be somewhat unpredictable and subject to the vagaries of bandwidth etc.

Can I use the audio input to trigger a hot key or apple script?

Hello All,
I am looking for a solution to use a FireWire audio interface to record in multiple tracks in garage band. I am looking to have each track queue up a hot key or a apple script when that track is receiving audio and when the audio stops. for instance if person one is speaking the hot key is activated and stops when they are done talking. And when person 2 starts on a different channel a separate hot key is activated. Is there any way to do this?
Thanks

I realize you are asking specifically about 'defaults', but as they concede in 'man defaults', it may not be the best tool for editing properties in "complex" structures, such as those buried in dicts within arrays, etc.
As an alternative, it looks like in 10.5, '/usr/libexec/PlistBuddy' is now a part of the standard install - 'PlistBuddy' may be more useful for this sort of task.
For example:<pre>
/usr/libexec/PlistBuddy -c "set Test:0:Name zzzz" /path/to/file.plist</pre>

Can I replace the hard drive on a mid 2012 MacBook Pro?

I just bought a new MacBook Pro. I had a 2010 MBP and kept the hard drive (Hitachi 500gb 7200 rpm) from that computer. It ws running 10.7 and worked fine. It still boots up perfectly on my MacPro so I know it works.
I tried to boot the new MacBook Pro using the old drive but I get a circle with a line through it. I have tried to boot using Firewire and even installed it into the new MacBook Pro. I then tried to re-install OS 10.7. I just downloaded it from the App Store for my MacPro so I tried to use it to re-install. It will not work on this new Macbook Pro. I had to download a version specific to this computer (using the "recover" disk). I takes 1.5 hours to download and then it still didn't work. When the computer reboots after the download and restarts I get the same **** circle with a line through it. The new "manual" is a joke. There is no reference to upgrading drives or memory. Did Apple decide to make their new laptops inaccessible to the owner? I can't find any info online and at the Apple store today they told me they knew of no reason that the drive wouldn't work.
Anyone else have any thoughts?

Have you considered Migration Assistant?
http://support.apple.com/kb/HT4889
From Mac HELP:
Transferring information using Migration Assistant
You can use Migration Assistant to transfer important information, such as user accounts, applications, network and computer settings, and files, from one Mac computer to another. You can also transfer information to a Mac from an external disk. Your information can be transferred using a FireWire cable or over a wired or wireless network.
NOTE:If you’re transferring information over a wired or wireless network, make sure your computers are connected to the same network.
To transfer information from a Mac:
Open Migration Assistant (located in the Utilities folder in the Applications folder), and then follow the onscreen instructions.
When you’re asked how you want to transfer your information, select the “From another Mac” button, and then select the method by which you want to transfer.
To transfer files using a FireWire cable connected to your computers, click Use FireWire. Then, follow the onscreen instructions to restart your other Mac while holding down the T key.
To transfer files using a network, click Use Network. Then, follow the onscreen instructions to open Migration Assistant on your other computer. When you’re asked how you want to transfer your information, select the “To another Mac” button.
To transfer information to a Mac:
Open Migration Assistant (located in the Utilities folder in the Applications folder), and then follow the onscreen instructions.
When you’re asked how you want to transfer your information, select the “To another Mac” button.
On the other computer, open Migration Assistant, and then follow the onscreen instructions. When you’re asked how you want to transfer your information, select the “From another Mac” button.
Ciao.

Why is the audio input different on my new macbook air?

I am trying to use a third-party headset with built in microphone. The adapters that I bought were recommended to me by the Apple store; they work fine in older models but do not work in the new macbook air. Why on earth would that be? There is no way to have this laptop recognize the microphone in my headset, the internal microphone stays on. I think this is an issue with the 2013 macbook air!

Its not hardware no, unless your specific Air had a problem.
reset SMC and recheck. ALSO do not use same plugged in after a sleep mode, there can be a fault, until this is fixed, that connected headsets and earphones will drop sound in sleep mode using Mavericks.
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Sample rate off the audio input and out devices do not match - what to do?

This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
Sample rate off the audio input and out devices do not match
and am asked to do this:
Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
I am trying to record from LineIn.
When running on a M-Audio sound card I don't face any problems.
HP 8560W, sound card IDT/High definition audio Codec
Any suggestions?
Knud
Copenhagen

You're sure you have set BOTH the input and output settings to 44.1 16 bit?
Which version of Windows are you running? There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard. Especially, you need to ensure that all "Windows Sounds" are turned OFF.

Can I replace the intern optical drive in my Power Mac G4 by one of other G4

Can I replace the optical drive in my powermac G4(sernr.CK135JGJL4Y) (Sony CD-RW CRX155E) 16 speed write by the one off a two year older model power mac G4 mirrored drive doors (sernr.CK3380F1PC4) with has a combo drive ( dvd rom read 8x,cd-r write 16x)? At the motherboard is notated IDE near connection of my mac.My optical drive is defect. External drives are not for sale, compatibel to OS 9.2.1 The operating system of the other one is OS 9.2.2

there was a way to add support for some later Opticals in OS9, but I can't rember just how now.
There are modified device plugins here.

How to replace the audio track of a videofile without re-coding the video

hey,
i did an animation in after effects which took about 4 hrs to render. now the sound designer did some changes and i have to replace the audio track. is that possible (in ae, premiere or ame) without encoding the video track again?
thx
u

hello,
DDVideo QuickTime video converter gain can help you.it only copys and normalises the audio for your mov video without encoding again.
Operation Steps：
1.Run the programe.
2.Add you MOV video,
3.Select MOV format in ProfileSettings,
4.There is a "Video Codec" in Video parameter,Please select " copy "
5,Please tick "VolumeGain" box and adjust output target video volume From 75DB to 105DB
6.Select output files directory，
7.click "convert " button to convert video.
The programe also can convert your video to other video format.you need to change Video codec to realize encoding again.
url:http://daydayvideo.com/quicktime-video-converter.htm
Hope it helps you.

Can I use multiple audio inputs in Flash Media Live Encoder?

This is the closet forum section to that program and I was wondering if there was any way to take the audio input from my capture card as well as a microphone and use those together at the same time.

FMLE will not directly mux audio connections from different sources. You could try possibly using a "Virtual Audio Cable", which is a outside program. Search Google for it.
If you want to have more control over what you broadcast, I suggest using a 3rd party program such as Telestream Wirecast, or Xsplit..
Xsplit is a realtively cheap alternative to Wirecast which is pricey.
Check them Out..

Hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help :)

hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help

Friedrich sp wrote:
Can you send me a mixer wich can do that, please ?
Who do you think I am? Santa Claus?
What you need is not a mixer, but an audio interface with at least 4 mic inputs. There is a lot of choice there, but you should indicate a budget. You can go from, say, € 300 to € thousands, if you want.
Roland UA 1010
Focusrite Scarlett 18i8
However, there are other options (like multi-out mixer plus multi in interface, or standalone mic preamps plus interface with 4 inputs, etc). I have little experience using these however so I really cannot say much about which one(s) to get. The two mentioned above both have four mic preamps, but they are by no means the only way to do it.
The cheapest solution I can think of is to get a second 1204USB, plug it in, and in OS X create an Aggregate device (=the two are being merged into 'one virtual' interface with two discrete stereo (= four discrete mono) inputs. Disadvantage: you keep the same (limited) soundquality of the 16 bits convertors. Getting any of the interfaces mentioned earlier will also mean you'll make the significant step up from 16 to 24 bits sound.

How can i cut the audio from 1 file and put it on another?

I have these2 files of the same movie, 1 is amazing quality but theres no audio. the other is crummy quality but has perfect audio. How can I cut the audio from the good audio version and paste it onto the good video file?
btw i have quicktime pro is that changes anything

Open the movie and press "Command J". This will bring up the properties window. Click on the Audio Track or Video Track and the "Extract/Delete" buttons will light up. Click "Delete" and it'll delete the currently selected track, click "Extract" and it will extract the selected track into a new movie. Just use Delete on the correct track and you're halfway there.
Then, select the movie that is just an Audio Track now, do "Command A" then "Command C" to copy the audio track. Go to the movie that's just a video track, move the insertion point to the beginning of the video then do "Option Command V" to add the Audio Track to the Video Track side by side.

How can I syncronize the analog input?

The signal coming from the microphone input of the DSP module, displayed on Waveform Graph, is "slipping".
How can I syncronize the analog input?
Thank you!

Ahh! You are doing this on the DSP itself. That would explain the Express VI problem, since you probably do not have floating point available. A simple level trigger is not hard to code using integer math. You can use the VIs I mentioned above as a guide (the algorithms should work well with integers as well as floating point) or just do it yourself. A possible algorithm for a positive going edge trigger is the following:
Search array until first point is less than level and second is greater than or equal to level (use In Range and Coerce to search).
Extract array subset from your data starting at the point you just found.
If you need a particular length of data and are continously acquiring, append data from the next scan onto your data until required length is met.
If you run into issues, let us know. Remember that shift registers are your friend.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Can I replace the audio input connection point on a macbook 1.1?

Similar Messages

Maybe you are looking for