Can I replace the Inspire 5500 decoder with a DDTS-100

Hi,
All I want to do is replace the decoder that comes with the Inspire 5.1 Digital 5500 set with a DDTS-100, and continue to use the same speakers. Is this possible?
The only thing I can see preventing this is that at the moment the the sub and the decoder have to be connected via a din socket (for control and power), but there is no din input on the DDTS-100. Will this be a problem?
Thanks in advance.

Google is a wonderful tool... Tried it's
http://www.hardwareluxx.de/akaspar/r...s00/back_s.jpg
Message Edited by rico01 on 08-17-2005 05:09 PM

Similar Messages

How can i replace the standard ESS iview with my own iview

I want to replace standard ESS addr iview with my own WD developed by ABAP
I added the iview(my WDA) into standard ESS addr page.
(pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.cn/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr)
And make it visible.
But I got this error in ESS PA addr :
WebDynpro Exception: Application PER_ADDRESS_CN Does Not Exist
Here is the error code :
Error code：ICF-IE-http-c:100-u:AC_WANGFZ-l:1-s:CE1-i:SAPCE101_CE1_01-w:0-d:20070514-t:172301-v:RABAX_STATE-e:UNCAUGHT_EXCEPTION
So , how can i replace the standard ESS iview with my own iview?
Thanks

Can you see any Javascript EPCF code in the old iView ? You are surely just going to have to find it (if our hunch is correct) and analyse it and copy it into your new iView so that it functions in some way that at least does not error

How can I replace the old commenting system with Disqus?

How can I replace the old commenting system on Business Catalyst with Disqus? Please help

Hi,
The Disqus integration has been done by at least one BC partner – simpleflame.com, on this site: http://kiyuco.com/free-videos . You could reach out to them inquiring for more details on how it has been done.
Kind regards,
-Sidney

Can I replace the 5400 RPM drive with a seagate 7200 RPM drive in a Lenovo B570

Hi there,
I have a Lenovo B570-1068AFU system that comes with a 5400 RPM HDD. Does this system suppor 7200 RPM HDD upgrades? I would like to replace the current 5400 RPM with a segate 7200 RPM. Possible?
Thank you for all your replies.
Solved!
Go to Solution.

To add a little to what Tanuj said, you may have a (fixable) issue when moving to the new drive.
Depending on when your laptop was built it may have a legacy (512-byte sector) or Advanced Format (4k-byte sector) hard drive. Many/most larger drives on the market are AF. If you migrate from legacy to AF, you may notice that Windows Update has stopped working. Windows 7 is supposed to handle AF drives correctly, but there are many cases where it doesn't until updated, or an additional driver is installed. The situation is worse with XP, but also fixable.
You may well not have any problems with this, but if you do I have some notes and links to fixes over here:
Windows Update Broken After Cloning Hard drive
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How can I replace the Python cgi script with CF

I am testing the sample app and want to just use CF to track
peer ids.
Can you give me the api to the web service calls.
I can then create the CFC to handle this.
In order to use the sample application that you built, you
need to setup your web server and host the provided Python script
(reg.cgi) for exchanging peer IDs. Please note that setting up the
web service is not needed for the hosted VideoPhone sample. In
VideoPhoneLabs.mxml, please set WebServiceUrl accordingly. You may
also use Google Apps to host this web service (minimal
modifications required).
The Python script should be placed in the cgi-bin location
according to your web server installation. The database is an
SQLite3 database. In reg.cgi, please edit the location of the
database in variable dbFile.
You also need to create a database scheme using the
followings:
CREATE TABLE registrations (
m_username VARCHAR COLLATE NOCASE,
m_identity VARCHAR,
m_updatetime DATETIME,
PRIMARY KEY (m_username)
CREATE INDEX registrations_updatetime ON registrations
(m_updatetime ASC);

the sample web service we provided has the following API:
to record peerID "1234" for username "foo", do
http://your.domain/cgi-bin/reg.cgi?username=foo&identity=1234
you should get back an XML document with result.update=true
or false depending on whether the database was updated.
to look up the peerID for username "foo", do
http://your.domain/cgi-bin/reg.cgi?friends=foo
you should get back an XML document like:
<?xml version="1.0" encoding="utf-8"?>
<result>
<friend>
<user>foo</user>
<identity>1234</identity>
</friend>
</result>
there will be no "identity" entry if the user is not found.
the lookup is case-insensitive but case-preserving, so if you
looked up "Foo", the user field would be "Foo" but there'd be an
extra "registered" field with the username as it was registered.
-mike

Can I replace the stock (MacMini) HD with an SSD?

Hi there,
I have a 2009 Mac Mini (early 2009 edition) and I'd like to pull the 320GB HD and replace it with a 256GB SSD that I can boot from.
Anyone here done this? looking for advice.
Thanks,
GJS

Thanks so much, I appreciate it.
That showed me what I can get and where I can purchase it.
Any chance you can point me to how?
Once I've got the new disk in place how do I do such a fundemental restore?
Thanks again.
I'm new to Macs.
But I do have 20+ yrs of PC and PC networking exp and I'm an electronics tech.
Thanks again,
GJS

Can I replace the curent hard drive with a larger one in my early 08 Book

OK - we have had this machine for alittle over a year. I bought it as a refurb from Mac (my personal favorite way to buy anything Mac) and we are running out of space. I have all of our pics on an external HD but still have the music on the main HD of the MacBook.
I know that the options of putting my iTunes library on the external is always there, but I HATE HATE HATE having things not on my machine. Things never seem to work just right when they are accessed remotely. Maybe I am not doing something right with the networking, but there seems to always be a delay. With the music, we have Airport connecting 2 remote sets of speakers and the AppleTV and there seems to be a delay even empty spots in the music when I am playing it remotely.
SO - what options do I have on the internal HD of my MacBook or can you make suggestions on the remote synching of the external HD and libraries, etc.
Many thanks for your help!
David

If you want to upgrade the HDD to 320GB/500GB and then upgrade the RAM to 4GB:
RAM you want to buy:
[G.Skill 2X2GB PC2-5300 RAM|http://www.newegg.com/Product/Product.aspx?Item=N82E16820231135] for $34.99, no tax, and free shipping.
As for HDD I'll give you some options between [320GB, 400GB, or 500GB along with 5400RPM or 7200RPM|http://www.newegg.com/Product/ProductList.aspx?Submit=Property&Subcateg ory=380&Description=&Type=&N=2010150380&srchInDesc=&MinPrice=&MaxPrice=&Property CodeValue=359%3A15133&PropertyCodeValue=3097%3A33643&PropertyCodeValue=3097%3A40 008&PropertyCodeValue=3097%3A40009&PropertyCodeValue=355%3A7777&PropertyCodeValu e=355%3A7776]:
I'd recommend the Hitachi 5k320 $59.99 after $10 rebate, 7k320 $59.98 after $20 rebate, or one of the 5400 RPM 500GB HDDs for $94.99 or $99.99.
You can also get a bit of cash back plus $5 through this [link|http://www.ebates.com/rf.do?referrerid=DMMneqKtzskNampKdYmMZA%3D%3D]

How can I replace the cursor in the below query?

I have this below query which calls a stored procedure that takes only 1 item's attributes at a time. But because of performance problems we are
required to remove the cursor. How can I replace the below cursor logic with set operations or CTE? Please advice.
DECLARE db_cursor_ava CURSOR
FOR
SELECT t.[agent-id],
t.[start-date],
t.[end-date],
t.[monitor-days],
t.[monitor-start],
t.[monitor-end],
t.[timezone-offset]
FROM @tmpAgentPeriodTimeRange t
OPEN db_cursor_ava
FETCH NEXT FROM db_cursor_ava INTO @agentID_ava,
@stDateTime_ava,
@endDateTime_ava,
@monDays_ava,
@monSt_ava,
@monEnd_ava,
@offset_ava
WHILE @@FETCH_STATUS = 0
BEGIN
DELETE
FROM @tmpMonitorPeriod
DELETE
FROM @tmpFinalResult
SET @runID = 1
IF(@endDateTime_ava>DATEADD(MI,@offset_ava, GETUTCDATE()))
BEGIN
SET @endDateTime_ava=DATEADD(MI,@offset_ava, GETUTCDATE())
END
INSERT INTO @tmpMonitorPeriod
EXEC core.usp_GetMonitoringPeriod
@startDate = @stDateTime_ava,
@endDate = @endDateTime_ava,
@monitoringDays = @monDays_ava,
@monitoringStart = @monSt_ava,
@monitoringEnd = @monEnd_ava
SELECT @maxID = MAX(tm.id)
FROM @tmpMonitorPeriod tm
FETCH NEXT FROM db_cursor_ava INTO @agentID_ava,
@stDateTime_ava,
@endDateTime_ava,
@monDays_ava,
@monSt_ava,
@monEnd_ava,
@offset_ava
END
CLOSE db_cursor_ava
DEALLOCATE db_cursor_ava
mayooran99

You've been down this path before - and the response is exactly the same.
how to replace cursor logic
And I'll suggest that you post the entire code - since you repeatedly delete 2 table variables but only populate one. The setting of @maxID also seems to have no purpose. And perhaps the issue here isn't the cursor but the general approach. Who knows
- but it appears you may have prematurely assumed that the cursor is the problem.

I have created a site with iWeb. I have replaced the iWeb Nav bar with a vertical one I made myself. Problem is, my top button disables itself if it overlaps into the "hidden" nav bar area. I can cmd click and drag it into this area, but then all the rest

I have created a site with iWeb. I have replaced the iWeb Nav bar with a vertical one I made myself. Problem is, my top button disables itself (and the animation doesn't work) if it overlaps into the "hidden" nav bar area (indicated by a blue rectangle). I can cmd click and drag it into this area, but then all the rest of my site is pushed down the page. Don't know what to do about this. I don't know how to bring the rest of the page up without dragging it also into the designated nav bar area. Also, by doing this, is it affecting my site in ant way? see my site here at www.steveburrowsimages.com
The home page is with it all draged into the nav bar area and the about page is with is outside the nav bar area (notice that the top button does not animate or work as a button.
Getting confused here. Anyone got any ideas?

Well, you made a good start with SEO by getting rid of the iWeb default navigation since it doesn't help the spiders and, out there in the real world, there are more people than you would think with javascript turned off in their browsers.
One of the downsides of iWeb is that it doesn't allow for the alt attribute in the img tag. Its well worth adding these to give you extra keywords even if you have captioned all your images. Use iWeb SEO Tool for this...
http://www.iwebformusicians.com/Search-Engine-Optimization/Tags.html
iWeb, just like most drag and drop software, creates a huge amount of code which causes the pages to load slowly in the browser. Running you files through an optimizer will help to reduce this problem and further reduce the size of image files even beyond the initial optimization you do before loading them into iWeb...
http://www.iwebformusicians.com/Search-Engine-Optimization/Optimize.html

Can i replace the casing on a 5G with a 6G case?

can i replace the casing on a 5G with a 6G case?

I wouldnt suggest doing that type of modification. Apple will not do that for you. If you are intent on that keyboard and your MB Air has bluetooth spend the extra $20 and get the wireless one.

Can I replace the keys on a MB air with keys of a different style?

So I'm in the market for a MBA, but I'm not the hugest fan of the keyboard. What I am a huge fan of is this: http://store.apple.com/us/product/MB110LL/B?fnode=MTY1NDA1Mg . I type on this keyboard every day, and it has quite literally become the highlight of my day. Something about it is just so... intuitive. For those who haven't used it, it uses the same key style as the white MacBooks of old, but with a metal background.
My question is this: can I replace the stock keycaps on the MBA with the ones from the other Apple Keyboard?
Will this require an extensive amount of service from Apple, or can I do it myself?
Any and all help is appreciated- thanks for reading.

I wouldnt suggest doing that type of modification. Apple will not do that for you. If you are intent on that keyboard and your MB Air has bluetooth spend the extra $20 and get the wireless one.

How can I replace the Portal with completely new Flash website?

Can I replace the Portal with completely new Flash website? My customer do not want the JSP UI. Instead, he wants a completely new designed Flash site. Is it possible to do it? How can I deploy a new portal to cover the current one?

If you have a look at some of the code examples which do the equivalent of site maps, you could in theory replace the whole portal desktop with some sort of Flash framework which reads the user's role structure at run time.
I think it is useful to remember that the SAP portal is primarily a business application launchpad. It does that very well. Trying to make it into a Flash launchpad will be challenging.

My iphone has fallen into the water 6months ago and there is no apple store in my country so i gave the phone s technical service.but they couldnt repair the phone.and now the battery is swollen.can i replace the phone with the new one in spain?

My iphone has fallen into the water 6months ago and there is no apple store in my country so i gave the phone s technical service.but they couldnt repair the phone.and now the battery is swollen.can i replace the phone with the new one in spain?

You can only obtain warranty OR post warranty service in the country of original purchase
As your iPhone has user damage it has no warranty
IF the iPhone originated from Spain or another EU country you can get out of warranty service in any EU country

Can I replace the G5 CP units in my pre intel power mac? I get the 3 flash light and am heating them with a hair dryer. It works but needs fixing and I can't afford a new mac

Can I replace the G5 CP units in my pre intel power mac? I get the 3 flash light and am heating them with a hair dryer. It works but needs fixing and I can't afford a new mac

OK, it looks like all but the first G5 1.6 Ghz, & the last 3 G5 Dual Cores will take PC3200 RAM...
Power Macintosh G5 1.8 (PCI-X) PowerMac7,2 1 Power Macintosh G5 2.0 DP (PCI-X) PowerMac7,2 1 Power Macintosh G5 1.8 DP (PCI-X) PowerMac7,2 1 Power Macintosh G5 1.8 DP (PCI) PowerMac7,3 1 Power Macintosh G5 2.0 DP (PCI-X 2) PowerMac7,3 1 Power Macintosh G5 2.5 DP (PCI-X) PowerMac7,3 1 Power Macintosh G5 1.8 (PCI) PowerMac9,1 1 Power Macintosh G5 2.0 DP (PCI) PowerMac7,3 1 Power Macintosh G5 2.3 DP (PCI-X) PowerMac7,3 1 Power Macintosh G5 2.7 DP (PCI-X) PowerMac7,3

Can I replace the VM included with JD2 with 1 more current?

Can I replace the VM included with JD2 with 1 more current?
IE: it looks like JDeveloper 2.0 comes with 1.2 jvm can i use
the most current (1.2.2) JVM from sun? How? or where can i find
instructions?
d
null

Hi
You can use a different version of the JDK by following these
steps:
1. Tools | Default Project Properties (or Project | Properties
depending on your need).
2. Target JDK version: Click Define.
3. Click New. Browse for java.exe. The Class path and Source path
will auto-populate.
4. Click OK.
5. Select the new target JDK for any existing projects you wish
to use.
regards
Dave Wilbur (guest) wrote:
: Can I replace the VM included with JD2 with 1 more current?
: IE: it looks like JDeveloper 2.0 comes with 1.2 jvm can i use
: the most current (1.2.2) JVM from sun? How? or where can i
find
: instructions?
: d
null

Can I replace the Inspire 5500 decoder with a DDTS-100

Similar Messages

Maybe you are looking for