Can I replace the video from a previously published vidcast?

In an effort to increase the quality (but not change the length or content), I'd like to re-post a video. However, this will change the file size.
If I replace the video file, do I need to change that item's XML metadata (specifically, the attribute 'length="77928200"')? If I replace the video and people download it before the updated XML is reflected on iTunes Store, will it break the download or mess anything up, or is the filesize data just "FYI" info?
My Vidcast URL:
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=294706812
My FEED:
http://www.realartusa.com/vidcast/xml/RA_cast-itunes.xml
Thanks!
andy nick

I don't know the answer to this, and Apple's Podcast Tech Specs page doesn't elaborate: but my guess would be that it won't make any difference - a download once started should continue until the actual file end is reached. All you can do is try.

Similar Messages

How can i detach the video from a clip so i can only use the audio when using imovie?

how can i detach the video from a clip so i can only use the audio when using imovie?

First, go to iMovie/Preferences and enable the Advanced Tools.
Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

I don't have very much space left on my iCloud backup. I had a previous iPhone, my current iPhone and my iPad that are all connected to one cloud. Can I delete the backup from my previous iPhone? Will it delete in the cloud AND on the phone?

I had a previous iPhone, my current iPhone and my iPad that are all connected to one cloud. Can I delete the backup from my previous iPhone? Will it delete in the cloud AND on the phone? or does it just delete from iCloud? or does it just delete from the phone? Someone please help!

You can delete the backup without any problem. Only the backup will be deleted from iCloud and nothing else will be deleted, so you can do it without worrying about losing data on iCloud or your devices

I have a video that I created for my daughter's first birthday. The hard drive on my computer crashed and I lost the video file. The only place I have it is on my iPod Classic. How can I transfer the video from my iPod to my new hard drive?

I have a video that I created for my daughter's first birthday. The hard drive on my computer crashed and I lost the video file. The only place I have it is on my iPod Classic. How can I transfer the video from my iPod to my new hard drive?

You are in luck, Refer to this recent post by tt2, on recovering media using 3rd Party Software.
He has made a comprehensive list, browse through them and decide which suits your requirements.
Have a nice day!

Can I capture the video from the TV card or video capture card to publish

Can I capture the video from the TV card or video capture card to publish?
I tried to use the USB camera, it's OK. But, will the TV card or video capture card also work?

Hi,
iChat will set up a Video chat window that takes in to account your Processor speed and Internet Speed and to some extent the Buddy's speed.
This then denotes the pixel content of each frame.
OS X 10.6.x tells me this is iChat 5 which in turn mean you have at least an Intel Core 2 Duo Processor.
This should be capable of 30 frames a sec at about 640 X 480 pixels (Check the Connection Doctor (Video Menu) and the Statistics tab during a Chat).
iChat 5 cannot do HD (Max of 4:3 ratio at the above figures)
After that it depends how you are recording the chat.
Quicktime X would do it.
iChat will do it itself (if the Buddy agrees)
10:14 PM Wednesday; February 1, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I can't find the videos from my Sony camera on my Mac Book Pro

I can't locate the videos from my Sony camera on my Mac Book Pro. Do I need additional software?

How & where did you search? I gather the videos are no longer in the cam? Where do you have the videos go when transferring from your cam?
Download WhatSize and/or OmniDiskSweeper to see if you can "see" the videos.

My phone is water damaged and i bought new iphone 5S can i restored the data from my previous phone cloud backup to the new one

my phone is dead due to water damaged and i bought new iphone 5S. can i restore the data from my previous phone cloud backup to the new one?

how? i can see the backup from the phone cloud setting but there is nothing to click to restored. the one ive got now is since last year

Can you import the video from an AVCHD Disc into FCP7 for editing?

Can the video from an AVCHD Disc be imported into FCP 7 for re-editing if you have a normal Superdrive burner?
The reason I ask is because last night our film-making club gave a show of short videos to some guests.
At the end it was decided to put them all on one DVD to send to the visitors as a memento.
However, some of the films were on AVCHD discs and I queried whether they could be copied, even in standard definition.
The "copier" said it was no problem as he had a PC and had done it before . . . . . cheeky devil!
So can it be done . . . . . on a PC or a Mac . . . . with a standard burner?
I have just tried but nothing in the BDMV folder can be imported.

GOT IT!
Copy the BDMV folder from the AVCHD disc to the desktop.
Use HandBrake to convert the .m2ts files to H.264
Then convert the H.264 files to an editable format.
Rather convoluted process but it works.
Anyone know a better method?

I have a sony hdd camcorder, how can i get the videos from it to my macpro?

I have a sony hdd camcorder, how can I get the viedos from the camcorder to the macpro?

If you have iMovie it can import video from most camcorders, but not all.   It comes with every Mac Pro.    If you need to restore it from the original installer discs, these are the directions:
http://support.apple.com/kb/HT2604
Typically iMovie can import if you connect via IEEE 1394 or USB.   IEEE 1394 comes in three flavors:
4 pin (typical for many camcorders), 6 pin (known as bus powered Firewire 400), 9 pin (known as Firewire 800 or 1394b).   Cables exist to connect each type of Firewire to each other. Locate your Camcorder directions on Sony's website to determine what pinout exists if you don't have the manual.
Double check on Sony's website there isn't a firmware update for compatibility with your operating system.
Push comes to shove, you may have to install Windows on your Mac to connect the Camcorder.

Itunes stopped syncing and says I must restore Ipod. My media videos did not get backed up. I can't replace the videos PLEASE HELPPPP

I need some serious help, PLEASE!!! While I was syncing with Itunes and my ipod touch everything just stopped. Then itunes says I must restore. I didn't get my media file videos backed up and I won't be able to replace the content. (mom 82 YOA playing panio & yodeling etc) Can i do anything to save them? Now my ipod won't do anything. I try to get it to open so I do as told with trying to get the red slider (?) but only get white apple then the itune symbol with the picture of the USB plug & wire below that. Please someone help.

Thank you, but I did that. I de-selected and then re-selected but because the 13019 still won't allow the sync, all it did was completely delete everything on my Ipod! I now have no songs on my Ipod when at least before, I had all my songs but the new 12 songs! I'm freaking!

Can't stop the videos from playing

Hello, I was wondering if anyone could help me. I have quite
a few videos on my web pages but they play automatically when i get
to the page. and all play at once. Im trying really hard to stop
them so this doesn't happen. Ive tried using the behaviors and
actions but nothing is working. Could anyone help?

apply the stop() method to your flvplayback instances after
you assign its contentPath. apply the play() method to start an
instance.
you can check the video class or the netstream class for
another way to stream video in flash.

Hi, I can't load the videos from youtube or other sites for 2 days now. It waits a long time to open the videos, or waits until all the video is downloaded. It wasn't like that until 2 days ago. How can I fix this problem? Thanks in advance.

can't watch videos, waits a long time to open it, or it never opens it.

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

Can i import the video from a camrecorder with only a USB connection?

Hi, I am very new and may i ask some silly questions? I was using an very old DV camcorder with a firewire connection and it worked fine with my Mac, but now I want to buy a new camcorder and i found that the models I like do not have the firewire links, only they have the USB, the models with the firewire links are very old styles.... can anyone tell me what to do with only the USB link? thanks!

Panasonic HD camcorder, HDC-SD1
Advanced High Definition (AVCHD) isn't supported by Apple you will encounter editing limitations wait for the apple software to catch up with this format.
Panasonic SDR-H250
Panasonic's hard disk model, 3CCD, MPEG2
the only thing this cam has going for it is the 3CCD, converting the already compressed mpeg2 video to the DV format for iMovie will result in an additional lost in quality an will be time comsuming (not to mention the extra app(s) neede for the conversion.
) you'll need for the conversion .
Here's what I'd do. I'd purchase a solid mini DV cam with all the bells and whistles and wait for the dusk to clear on the all new/problematic formats. In the process saving $400 - $500.
Don't become all hyped up with the marketing crap for these new cams. Sony Vegas 7 is the only app I know of that just recently updated to handle the AVCHD format. And until comsumers start burning HD DVDs whats the point. A good mini DV cam will still be viable a couple of years down the road and todays new cams will be cheaper and better.
Here's a sweet cam that will allow you to take videos and edit them in no time.
Sony DCR-HC96,
Analog-to-Digital Converter, external Microphone Input
Analog Audio/Video Input(s) just to mention a few of the most sought after features.
You can find this cam on the web (eg. amazon.com) for about $500.
Then again that's just what I'd do, other my have different advice/suggestions.
Hope this info is of some use.

I just got an ipad and took video of my daughter playing volleyball. Now I can't get the video from the ipad to the computer. I have a dell. Help!

I just got an ipad and took video of my daughter playing volleyball. Now I can't download it onto my computer. I have a Dell. Please help!

the DCIM folder is just a folder called DCIM . Just like a camera would create, so does the iPad. Both your videos and your photos are located inside that folder.
In Windows Explorer: Computer\iPad's Name\Internal Storage\DCIM
Instead of Rick's iPhone it will have your iPad's name. whatever it may be.

How can I put the Video from a bad DVD into iDVD and to a new DVD?

I have a DVD (homemade, no copy protection) and it was created with primitive menu software. Is there a way to take the Video_TS folder and put it onto iDVD 08 and make a new DVD from it? The old DVD no longer plays in my home DVD player and I want to make a decent menu for it etc.

Toast is a better option for you.
But if you really need the fancy menus of iDvd and whatnot, then you'll need to find a way to convert the mpeg 2 files to QuickTime for importing into i-apps. This app may help:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.products.htm

Can I replace the video from a previously published vidcast?

Similar Messages

Maybe you are looking for