Can I reschedule Early Watch Report's generation schedule?

Dear gurus,
    There is a backgroud job running in our ECC PRD system. It gathered the performance data and sent it to SAP.
SAP will generate Early Watch Report for(EWA) me every week.
    Now my question is:  Can I reschedule the EWA generation period in ECC PRD via SDCCN? Because I want to get  Early Watch Report that contains our PRD system's healthy status from 1st June to 30ty June (the whole week).
Can I? Hope you could give me some advice.
Thank you very much!
Jason

Hi Jason,
I guess you meant "the whole month" instead of "the whole week".  Unfortunately the EarlyWatch Alert report is always weekly and cannot cover an entire month.  But take a look at Service Level Reporting.  An SLR can be weekly or monthly and contains much of the same data as the EWA.  I think it will satisfy your requirements.  A good starting point is here: http://help.sap.com/saphelp_smehp1/helpdata/en/36/5ec6267ba34de08c55e3c310ebdece/frameset.htm
Good luck!
Jon

Similar Messages

  • Early Watch Report for TREX

    Hi All,
    Can we generate Early Watch Report for TREX. How do we add TREX system through SMSY in Solution Manager?
    Thanks

    Dear Amit,
    Unfortunately currently its not  possible to intagrate the TREX system details to the EWA reporting. There are no TREX specific checks yet available.
    Thanks,
    Mark

  • Early watch report from SAP

    Hi all Experts,
    Early watch report from SAP has suggested to delete data from BW statics table but has not specified any frequency of deleting data like 15 days, 30 days.
    at present we have Number of entries in table RSDDSTAT_OLAP is 1095081 and Number of entries in RSDDSTAT_DM is 151687.
    so my questions is that how to delete these data from table.
    There is a program RSDDSTAT_DATA_DELETE which can be sheduled in background to delete data from these tables.
    but I am not sure how many months of data should be stored in these tables, and if I delete data from these table how it will affect the delta loads for BW statistics cube.
    there is one program which can automatically delete data from these tables
    Use the report se38-->SAP_RSADMIN_MAINTAIN to set the parameter                              
    object = TCT_KEEP_OLAP_DM_DATA_N_DAYS                              
    Value = 14 (Default ..)                         
    Please advice which option should I use.
    I am in BI7 version

    HI
    I scheduled Program to delete data which is older than 30 days.
    now my problem is solved

  • Early Watch Report - Archive EWA

    Hello,
      I have configured Early Watch Report in my Solution Manager 4.0 on Windows Server 2003 4 weeks back.
    EWA report is comng perfectly  but in my Solution for each server I am able to see only 2 (Latest one and  Next Schedued) EWA report at a time.Not able to see previous week report.
    How can I see my older EWA reports ??
    Thanks,
    Chandresh Pranami

    hi.
    maybe you have configured that older reports are deleted after two weeks...
    there is a possibility to customize - i think its under transaction solution_manager.
    normally, they never go away.
    regards,
    martin

  • SAP Early Watch Report - Workload By Application Module

    I'm looking at the above part of the Early Watch Report and have been tasked with trying to figure out what programs/processes make up the various modules it is showing such as PY-US, PT-RC, PA,CATS, Unknown, etc.   Can somebody tell me where the system looks to determine what module a process falls in?  Is it something on the ABAP side or where?

    Hi,
    the data is taken from transaction ST03.
    Select <Expert Mode>. Select the application server and time frame of your choice. Afterwards select <Analysis Views | Transaction Profile | EarlyWatch>.
    This table shows all reports and transaction names, which where run in the system in the respective time frame. If you now choose <Aggregation | Application/Subapplication>, you should find a list which fits to the respective chapter in the report. By double-clicking on the specific application name you should also find a list with the according line items for reports and transaction names.
    Best Regards, Vital

  • Query Regarding Early Watch Report

    Hi All,
    I have certain queries regarding the Early Watch Report.
    Our platform in Oracle 10g and OS is HP-UX.Please sombody help me with the following.
    1.What is Early Watch report and why we use it?
    2.How to configure Early watch report from Solution Manager for DEV and QUA and PRO server?
    3.If we dont configure will SAP take it from the system by logging in to client 066(correct me if I am wrong).
    I have read SAP notes 20722,917558,12103,371023 but cant really make out how to configure it for our servers via Solution Manager.
    PS:Helpful suggestions will be obliged and rewarded.
    Regards,
    Ashutosh

    Hi Ashutosh,
    Please check below answers for your queries:
    1.What is Early Watch report and why we use it?
    The SAP EarlyWatch Alert is a diagnosis service, for the solution monitoring of SAP and non-SAP systems in the SAP Solution ManagerThis process identifies potential problems early, avoids bottlenecks and monitors the performance of your systems. SAP EarlyWatch Alert monitors your most important business processes and systems.
    2.How to configure Early watch report from Solution Manager for DEV and QUA and PRO server?
    Prerequisites to configure the Early Watch Report:
    You have:
    ·        set up RFC connections between your satellite systems and the SAP Solution Manager system, and an RFC connection between the SAP Solution Manager and the SAP Service Marketplace.
    ·        checked the availability of the required tools for the SAP service session (ST-A, ST-PI add-on), with the report RTCCTOOL.
    ·        assigned the Solution Monitoring roles to the users.
    ·        set up the Automatic Session Manager (ASM) in the Service Data Control Center (transaction: SDCCN) for all SAP satellite systems and the central SAP Solution Manager of your solution (SAP note 91488).
    ·        set up your systems in a solution landscape in the SAP Solution Manager.
    Configuration steps:
    1.      You configure the SAP EarlyWatch Alert scheduling in the SAP Solution Manager.
    You have:
    ¡        scheduled the service sessions for your solution, in the SAP Solution Manager Solution Directory
    Procedure:
           1.      Choose the transaction SOLUTION_MANAGER.
           2.      Choose the Solution Landscape tab in the Operations Setup area.
           3.      Choose the Solution Settings link.
    You go to the Solution Directory.
    Alternatively, you can also select a solution from the Overview of active solutions and go to the Solution Directory.
           4.      Select your solution.
           5.      You can also enter contact person data in the Contact Person tab.
          Proceed as follows:
                                                      i.       Choose Add Contact Person.
                                                    ii.       Enter the required data.
                                                   iii.       Save your entries.
    §         The contact data appears in the Solution Monitoring sessions, e.g. in Set-Up Business Process Monitoringsapurl_link_0001_0004_0005.
           6.      Specify the settings for your solution, in the Solution Settings tab:
            Ex:  Day of SAP EarlyWatch Alert data download
    At the end save your entries.
    3.If we dont configure will SAP take it from the system by logging in to client 066?
    Yes, SAP uses this client when running the Early Watch Check.
    Hope it clears your doubt.
    Thanks
    Kishore

  • How to generate "Early watch report uisng sdccn"

    Hi Guys,
    Can any body please provide me brief knowledge on " how to generate an Early Watch Report using SDCCN"
    infact i have searched in the forums but not very much clear.
    Thanks,
    LAX

    Hi,
    can you look at this
    [EWA|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fnetweaver%2fs-u%2fsolutionManager4.0-HowtogenerateEWA%E2%80%99sFromSatelliteSystems.pdf]
    [http://sapnetweavernotes.blogspot.com/2008/04/sap-earlywatch-alert.html]
    [https://service.sap.com/earlywatch]
    For taking EWA report through solution manager, you have to perform satelite system configuration. Please check the below link which have tutor files, related step by step documents for EWA.
      [http://www.service.sap.com/rkt-solman]--> select ur component version --> <Technology Cons. & System Admin.> select EWA
    763561 -- More information about SDCCN can be obtained here.
    91488 --- SAP Support Services- Central preparatory note.
    Regards,
    Muralidhar

  • How To Generate Early watch report Using SDCCN

    Hi Guys,
    Can any body please provide me brief  knowledge on " how to generate an Early Watch Report using SDCCN"
    infact i have searched in the forums but not very much clear.
    Thanks,
    LAX

    This may not be the appropriate forum for this question. You may want to consider posting your question on the SAP NetWeaver Administration forum instead.
    Having said that, the following may help:
    OSS Note 763561 - Service Data Control Center (SDCCN) - FAQ

  • The Early Watch report is being send in mail but not in PDF.

    Hi All,
    We ahve recently configured CEN system which is configured for early watch report using mails but it is not being sent in pdf
    it is being send in html.
    Can some one pleas ehelp
    Regards
    Yogesh

    Hello Yogesh,
    Earlywatch reports can only be generated in HTML and Word. Please take a look at below link for more details.
    http://help.sap.com/saphelp_sm32/helpdata/en/87/50cce344ae495bae240add66a28ed7/content.htm
    Thanks,
    Siva Kumar

  • RFC configuration for system monitoring / Early Watch reports

    Hello Basis Gurus:
    Please help me out.....
    The early watch reports in the solution manager of my system are failing consistently to execute.This is happening for all the 3 systems DEV,QAS,PRD.when i click on individual earlywatch reports it takes me to a screen which says  "data for this report is overdue.....go to your satellite system SDCCN to see why the data was not sent...."
    It says ...check the following things.....
    "The RFC connection for the SAP Solution Manager system is not working.
    The 'Task Processor' background job, which collects the session data, has been changed.
    Problems arose while data was being collected (see the detail log for the task that collects the session data).
    A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data."
    I can see the task processor job , and the periodic Maintenance package scheduled everyday and completed sucessfully.So is it the RFC which is causing the problem.
    Im SM59 of the solman, i can see system generated RFCs for the PRD,DEV,QAS and SND  (...3 for each of these systems...).
    say for PRD, these are the 3 RFCs.
    1.)SM_PRDCLNT<client#>_READ.
    2.)SM_PRDCLNT<client#>_TMW.
    3.)SM_PRDCLNT<client#>_TRUSTED.
    I am not sure which RFCs among the 3 for any given system does the solman use to communicate to the satellite systems.
    *The user id section in the Logon Data of any of these RFCs is blank.and the password says "is initial"...*is this correct.Does the user id have to be a communication type of user...
    PLeaase advise as to what could be going wrong..
    Regards.

    Hi,
    The system uses ABAP Connection (Connection Type 3) to connect to different Systems to execute Functional Calls.
    Now in your case, there are 3 different connections meaning your Basis Team has used 3 connections for different connection activities. This is totally a business dependent scenario.
    Now each time you create a RFC Connection, the system will need the following information to remotely call another system, they are:
    Host Details of Target System
    Logon Details to remotely login
    For RFC Connections the User Type has to be Communications User. But there are companies which use Dialog User Types as well to remotely login for some cases. When the User ID is created for an RFC User and a Password is assigned to it, this Password is considered as the Initial Password by the system. This Password is taken as the Initial Password in the RFC Connection as well.
    There can be cases where the system is Trusted and there is no need of a password, but an Username is mandatory in all cases. Remember if you set the system as Trusted, the password option gets deactivated and the connection wont work, if the system does not have the Trusted status.
    But in any case you must assign the Username alongwith the Client and Language Details in the RFC Connection for it to work.
    Hope this helps.
    /Manoj

  • Steps to start the Early watch report

    Hi Experts,
    Can you explain me about early watch report in detail and let me know the step by step to prepare early watch report.
    Is there any difference between Early watch report and Early watch alert?
    Regards,
    Suresh.

    Hi Suresh,
    Early Watch report as name suggests is performance Summary  report for system.
    It is auto generated report via solution Manager which collects Data from system thus generating the report.
    It covers CPU/ memory/Disk Utilization/Database growth/system performance/critical errors/dumps etc.
    For functional team it shows which reports are taking more time and shows the queries causing it.
    From BW stand point it shows lot of data related to cubes, info providers, Queried and what can be done to improve the overall performance in general.
    Hope this answers your query if not please do revert in case you have any queries.
    Thanks &Regards,
    RDS

  • Schedule the Early watch report job

    Hi
    I want to schedule the Early watch report job. Now I am doing it manually by downloading the xml data(from Portal ) and uploading in solman to get the report.
    Please tell me the procedure.
    Thanks in advance
    Yogesh

    Hi
    I believe you better need to implement SMD soultion manager diagnostics, thats the best way
    can find more info on
    Installing a Solution Manager Diagnostics (the easy way)
    http://service.sap.com/diagnostics
    Jo

  • Schedule the Early watch report

    Hi
    I want to schedule the Early watch report job. Now I am doing it manually by downloading the xml data(from Portal ) and uploading in solman to get the report.
    Please tell me the procedure.
    Thanks in advance
    Yogesh

    Hi
    I believe you better need to implement SMD soultion manager diagnostics, thats the best way
    can find more info on
    Installing a Solution Manager Diagnostics (the easy way)
    http://service.sap.com/diagnostics
    Jo

  • Configure Early Watch Reports in SolMan

    Hi Gurus,
        Can you please help me out in the steps of configuring SolMan for Early Watch Reports.
    Thanks in Advance,
    Sachin Kumar.

    Hello Sachin,
    Please implement/apply latest ST-PI and ST-API patches in your Dev system.
    after applying the patches please execute RTCCTOOL program in Se38 t code.
    This program helps in service preperation so that data from your satellite system(Dev) can be sent to
    solution manager system.
    once you are done with that we can configure Dev system in solution manager system and activate SDCCN.
    SDCCN will help in collecting data from dev to Solman.
    Please apply ST-PI and ST-API from SAINT transaction if it has never applied into your system.
    You can add dev qa and prd system in Solution manager system
    Use SMSY t code and add the systems(use add system with assistant option).
    this will help you to create the RFC's also which are responsible for cummunicating from Solution manager to Satellite and vice versa.
    after that make sure you execute the abap program RTCCTOOL and implement the missing notes thru that only which the report suggests.
    let me know if you face any issues for the above steps ...
    Cheers,Amber S

  • BW Early watch report ( SBIW )

    Hi All,
    We have received the early watch report for BW and in that It has mentioned to do SBIW ( IMG ) activity as follows:
    Upload customizing BW (SBIW)
    One part of table ROIDOCPRMS in every SAP source system controls the data transfer from the source systems
    to this system. Table ROIDOCPRMS contains the following information:
    maxsize - Maximum size of an IDoc packet in KB
    statfrqu - The number of packets that are transferred before statistical information is sent
    maxlines - Maximum number of records sent in one IDoc packet
    maxprocs - Maximum number of dialog work processes for each upload request used to send the data to the
    system
    The correct setup of this table is important for performance and stability of the upload process. We checked the
    setup of this table for all source systems connected to this system.
    SAP asks to change the entries and it has given recommendations. I hope this will increase the rate of Data Transfer from ERP to BW.
    My Questions :
    01. My question is they have mentioned to set this in the respective Source System. i.e. Should I set it in the Production System.
    02. one more thing. It is also required to create a transport request to do the above operation. for that case, should I create a Transport Request in the Production System. ? Is that generally ok ? how it is handled usually ??
    03. To execute SBIW Transaction, what authorization is required ? and how to check which authorization is required to execute SBIW ??
    Please throw me some light on this.
    Thanking you in Anticipation.
    Thanks & Regards
    L Raghunahth
    PS : If you know answer to any particular one also, please feel free to answer.

    Hi Raghunahth,
    Please see my answers below.
    01. My question is they have mentioned to set this in the respective Source System. i.e. Should I set it in the Production System.
    These settings are related to the respective source sytem. Yes these settings are to be done on production system
    02. one more thing. It is also required to create a transport request to do the above operation. for that case, should I create a Transport Request in the Production System. ? Is that generally ok ? how it is handled usually ??
    No transport request required. Check with your basis guy to carryout these settings.
    03. To execute SBIW Transaction, what authorization is required ? and how to check which authorization is required to execute SBIW ??
    Ask the basis guy to give acces rights to tcode SBIW on the source system.
    Hope this helps.
    Regards,
    Sreenivas.

Maybe you are looking for