Can i restore from sparse image to raid0 array

im tring to boot from the SL disk and restore my disk image to my raid0
or will it break my raid0?

Your RAID should have been built with SL to begin with in order to work.
Why not boot from a bootable backup instead? a must for anyone but esp. running RAID.
You will need to erase, so you should recreate the array anyway.

Similar Messages

Disk Utility Restore from Sparse Image taking forever

I created a sparse image backup of my MBP C2D using SuperDuper! before sending the laptop back to Apple for repair. I wiped the drive clean before shipping. I now have the laptop back and am trying to restore the sparse image to the HD.
The sparse image file is on an HD in my G5 tower and is just over 108 GB. I booted the G5 into target disk mode and connected it to my MBP via FW800. I then booted off the Leopard install disk and launched Disk Utility to do the restore.
The sparse image mounts fine in Disk Utility and is specified as my source for the restore.
I started this restore last night before I checked out for the night and when I got up this morning, Disk Utility showed about 35-40% of the image had been restored and 14 HOURS were remaining. That seems a little excessive after it had already been running for well over 9 - 10 hours.
The sparse image mounts on the MBP just fine using target disk mode from my G5 -- so as far as can tell, my backup image itself is ok.
My question is this: is the Restore function performance of Disk Utility with sparse images really this bad or is something wrong with what I am doing? I really don't want to rebuild my laptop from scratch, but if I have to wait 34 or more hours for Disk Utility to finish a restore -- it might be quicker to rebuild it.
Any ideas out there?
Message was edited by: Randy Vose

Randy Vose wrote:
I created a sparse image backup of my MBP C2D using SuperDuper! before sending the laptop back to Apple for repair. I wiped the drive clean before shipping. I now have the laptop back and am trying to restore the sparse image to the HD.
The sparse image file is on an HD in my G5 tower and is just over 108 GB. I booted the G5 into target disk mode and connected it to my MBP via FW800. I then booted off the Leopard install disk and launched Disk Utility to do the restore.
The sparse image mounts fine in Disk Utility and is specified as my source for the restore.
I started this restore last night before I checked out for the night and when I got up this morning, Disk Utility showed about 35-40% of the image had been restored and 14 HOURS were remaining. That seems a little excessive after it had already been running for well over 9 - 10 hours.
The sparse image mounts on the MBP just fine using target disk mode from my G5 -- so as far as can tell, my backup image itself is ok.
My question is this: is the Restore function performance of Disk Utility with sparse images really this bad or is something wrong with what I am doing?
no the restore function is not this bad.
something must be wrong with your sparse image. you should have tested it before sending the computer for repairs. and why did you use a sparse image at all?! you should have made (and tested) a standard clone.

Restore from sparse images

I have a cloned Tiger HD on a sparse image made with Carbon Copy Cloner.
It resides on an EX HD.
What would be the best way to get the entire contents of the disk image back on the computer that now has a clean drive?
Thanks.
Message was edited by: Tom Murray2

Was able to clone back to the iMac by;
Placeing the sparse image on my functioning G5 Tower(OSX installed) with CCC.
Connect the iMac(with no operating system) to the Tower via firewire and start up in target disk mode.
On the Tower, open CCC.
Choose the image as source and navigate to the iMac, which now is mounted on the Tower desktop, as the destination.
Click clone.
Unfortunately, the iMac, again, does not get past the grey screen after start up. Which is why I cloned the HD in the first place.

How can I restore a single image from an aperture time machine backup, do I have to restore the entire library? that does not make sense

I hope there has been found a more efficiant solution for this, how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
any suggestions?

Did you try browsing your backups in the Finder ? That is, do not go and "Enter Time Machine". Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.

Can't restore from Disk Utility while booted from OS installation DVD

I'm absolutely astounded by this.
I have a new MacBook Pro 17". I restored my files to it and in short order, had it too full/fragmented to re-partition it for Boot Camp.
So I decided to image the disk and store that image file on a FireWire drive, wipe the system disk and restore it cleanly from the image file backup, hoping that would result in contiguous blocks used so that I could then re-partition for Boot Camp.
When booted off the OS X for Intel DVD-ROM disc (10.4.6 - the one that came with my MacBook Pro), if I get out of Installer and into Disk Utility, if I select the internal hard drive and click the Restore tab, I can easily select the hard drive backup image with the button. But the "Destination Disk:" box is only accessible via dragging the disk to the box.
There's one little problem - there is no Desktop, so the disk(s) do not appear on the Desktop. There is no way to drag the target disk to be restored to into the Destination Disk: box. You cannot drag a disk out from the little sidebar inside the Disk Utility window over to the Destination box. I tried. You can't drag any disk anywhere from that sidebar. It's clear that the only way to drag a disk anywhere is if it's shown on the Desktop in Finder (which isn't running when the installation DVD-ROM is booted from). There is simply no way that I can find to restore a disk drive from a saved backup disk image when booted from the installation DVD-ROM.
Please tell me I'm ******** and missing something, or if there's a Better Way to do this. (I can't seem to run Retrospect while booted off the DVD-ROM, so I can't restore from my Retrospect full backup of the disk, either. Joy!)
(I'm really curious if there's a Better Way - especially because it appears I can't boot from an external FireWire or USB 2.0 drive, so I need something that will work in this extremely limited installation DVD-ROM booted environment, I think.)
MacBook Pro 17" dual 2.16 GHz ; Mac OS X (10.4.6) Booted from Mac OS X for Intel 10.4.6 installation DVD-ROM

You can use an external bootable drive with a MacBook Pro -- check your manual or the built in help. Your problem is that for some reason, you can't install a bootable system on one. There are several reasons why Installer won't enable you to do so: insufficient space, incompatible partition scheme (should be GUID) or file system (should be HFS+ or similar), or wrong installation option selected.
It is possible this is related to why you can't drag the startup volume to the destination box in Disk Utility. It must be an HFS+ variant file system.
I think you should check carefully with D.U. the partition scheme of all your drives & the file system format of all the volumes involved. Also run repair disk, as someone has already pointed out.
The behavior with the Restore function is not normal -- you should be able to drag a volume to the destination box from the list.

Time Machine Has Never Performed a Full Backup that Can Be Restored From

I've been backing up my system via time machine to a time capsule. I'm using the same time capsule for both my mac and my wife's. My wife's mac is backing up fine with numerous full backups that can be restored from. However, when I recently booted into recovery mode, I discovered there were no full backups of my mac that I could restore from. I've been using this time capsule for about a year now so I'm concerned as to why there are no full backups. I can enter time machine and see my docs and files...just no full backups. Thanks for your help.

There was a bug in Mountain Lion that caused TM to fail to backup system files.
See D10 here. http://pondini.org/TM/Troubleshooting.html
Honestly if you want a reliable full backup get CCC or other clone type backup and do a disk image to a USB drive that you can then test boot from. Then use TM for incrementals..
What the change to Maverick will bring I am not sure.. ??
We went from big cats to card sharps in Westerns..
http://en.wikipedia.org/wiki/Maverick_(TV_series)

How many times can you restore from the same backup?

how many times can you restore from the same backup?

As many times as you want till you delete or modify it.
It's YOUR backup, a copy of all your stuff.
Not some copyrighted, access controlled bunch of bytes representing a picture, a song or a movie, with a bunch of lawyers from the entertainment maff1a hellbent on restricting what you can do with it.

Can you restore from a backup that was made on a previous version of iOS?

Hello.
I had an iPhone 3GS unning whatever the latest proper version of iOS currently is at the time of writing (4.3.5, is it?) but on Saturday I was on a rather drunken night out and I lost my phone.
Silly me.
But I was out of contract and the new iPhone (4S or 5 or whatever) is going to be announced on Tuesday next week (just been confirmed by Apple today) so I'm just going to make do with an old, spare Nokia until the new iPhone is available in the UK.
Once the new iPhone launches I will buy it, plug it into iTunes and just restore from backup and I'm back in business.
Except for one thing... The new iPhone will have iOS 5 installed and my last backup before I lost my 3GS was done on iOS 4.3.5.
Is this going to be a problem or can you restore from a backup made with an older version of the OS?
I've never done it before so I don't know.
J

You "should" have no problem doing that. I say should, because you can't restore a backup made with a higher iOS on a device running a lower iOS, I.E. - you can't restore a backup made from a device running, let's say iOS 4.3.5 on a device running iOS 4.2.10. However, iOS 5.0 will present many new features and since it has not been released, I have no way of stating with certainty that doing as you plan will not present any problems. Past history indicates it won't, but we'll have to wait & see.

Iphone 4 went into recovery mode when trying to restore, only option available now is to "restore and update" however this will not work, how can you restore from a backup once in recovery mode and only option is "restore and upgrade"? Please help!

iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.

You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

Brand new iMac, Can I restore from Time machine or start new?

My Mac Pro died a month ago so I am replacing it with a 27 Inch iMac. I had a time machine back up on my Mac Pro. When I get my iMac can I restore from the time machine so that I don't have to go through installing all of my programs again or should I start fresh and install everything fr

It's probably "better" to put a fresh install of everything but it certainly isn't the easiest or fastest. I'd say if everythg was running fine at the time of your last TM backup I'd restore from the TM probably using Migration Assistant. Installing and registering a bunch of software can be a pain. I've always used Migration Assistant when I get a new Mac. What happened to the Mac Pro? Is the hard drive still available? You could stick it into an external enclosure and migrate from that.

My phone is stuck in recovery mode, and iTunes will only let me restore to factory settings. My question: Can I restore from iTunes backup after restoring to factory settings?

I attempted to update to iOS 8 and now my phone is stuck in recovery mode, and iTunes will only let me restore to factory settings. My question: Can I restore from iTunes backup after restoring to factory settings?

Hi, kformagg
I would say yes. I once had the same problem (iPhone 5, IOS 7) and first restored to factory settings and after that from iCloud backup.
It worked very well.

Had to install a new hard drive early 2008 iMac, now can't restore from Time Machine.

Had to install a new hard drive in a early 2008 iMac, now can't restore from Time Machine. Backups show in Time Machine but I can't select them.
Serial Number QP*****1LW
<Edited by Host>

Here are some notes on Time Machine problems.
http://pondini.org/TM/
Troubleshooting.html
I have asked the hosts that your serial number be removed. Best not to publish it,

HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago. I changed my iTunes password about 10 months ago; but apparently, the backups continue to use the password that existed when the phone was first set up.
A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password.
I thought iTunes and Apple were smarter than that. With so many posts stating exactly the same problem, it is clear that this is bug in the software.
Best,
Craig

Created image of volume not drive, is there a way to restore from that image?

Hello so my hdd failed and I made a image of the volume accidentally rather than the drive, now when I try to restore from the image it says that you need to scan image for restore, but everytime I try to do it, it fails. Do you know a way to bypass that and just restore from the volume image? It is possible that i might be able to put back in my old drive and try to image the drive, but i really dont want to have to do it. please let me know

You probably need a partition map and a Recovery HD on the drive, then restore the Volume.
OS X Lion: About Lion Recovery Disk Assistant
Don't forget about FireWire Target disk mode.

I just bought a 6 . Everything can be restored from iCloud except photo album from my old 5s (iOS 7.1.2). Why?

I just bought a 6+. Everything can be restored from iCloud except photo album from my old 5s (iOS 7.1.2). Why?

iCloud: iCloud storage and backup overview

Can i restore from sparse image to raid0 array

Similar Messages

Maybe you are looking for