Can I restore Gamecenter after an update?

I updated one of my children's ipods to version 5.1. When we restored from backup, all the apps came back with her progress still in the app. However, Gamecenter wouldn't allow her to enter her user name. It says her user name is already taken. When she enters a new one, she can't gain access to her games or progress that she had before. Is it possible to restore Gamecenter and her progress? There are some apps (Dragonvale) that she plays through Gamecenter, that she has spent money on in-app purchases. She is devastated that she has to start from the beginning again. Can someone help???

See if the previous discussions on the right side of this page under the heading "More Like This" will help.

Similar Messages

  • 3014 error i can't restore ipad after firmware update attempt

    3014 error i can't restore ipad after firmware update attempt

    See this thread with the same question.
    https://discussions.apple.com/thread/5045573?tstart=0

  • I can't launch Mail after i update the OS to X Yosemite

    I can't launch Mail after i update the OS to X Yosemite.

    can't open mail after installing yosemite

  • Can't steam video after latest update on my I pad mini!

    Can't steam video after last update on I pad mini . Video loads very slow and keeps dropping out it was fine before the update!!!

    If it's showing a different Apple ID, you need to either update them from that Apple ID or delete and redownload them when signed into a different one, which may require repurchasing paid applications.
    (109113)

  • I can not login Flickrs, after I update IOS 8.0.2 ?

    I can not login Flickrs, after I update iOS 8.0.2 ?

    I tried hard reset by press both power and home button.
    I can not hear music played through the speaker. Just music only.
    The speaker workes well with imcomming call or out going call by turn on loud speaker.
    Linh.

  • HT5622 Why can't I purchase after I update my payment detail?

    Why can't I purchase after I update my payment detail?

    My first suggestion would be to double check and make sure that the changes were saved in the payment information area of your account, to back and check to be sure.
    Settings>iTunes and App Stores>Apple ID> Tap your ID. Then Tap View Apple ID. Enter your password and go to Payment Information and check. Check the expiration date, biling address, security code, etc. and then save your changes.
    If everything is done successfully, you will get an email from Apple notifying you that they received changes to your account and if these changes were not made by you... Etc, etc. When you get that email, you know that the changes have been confirmed.

  • HT201210 error 3014, can't restore iPhone after updated the new version of itune

    after updated the new version of itunes, my iphone can't back up and restore.
    Why everytime update the new version of itunes have problem????

    See Network connection or download errors
    Error 1479: This error occurs when trying to contact Apple for an update or restore. Quit iTunes, disconnect from USB, restart the iOS device, reconnect the device to the computer, then launch iTunes and attempt to update or restore again.
    Error 1639: See this article for resolution.
    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good networ

  • HELP! Can't restore backup after going from 4.2 to 4.1

    I had 4.2b2 installed on my iPhone 4. I did a sync & it backed up.
    I then restored 4.1 since 4.2 was very buggy for me.
    When I went to restore the backup, it took like 5 seconds & of course the backup was not restored. I have too much information in various apps that I will lose if I can't restore that backup.
    What do I do?

    Turn off your iPhone, then press&release power to turn it back on while keeping the home button pressed for 20 seconds to boot up your iPhone in recovery mode (you should see the "Connect to iTunes" logo with an iPhone cable on the screen).
    Then connect your iPhone do your computer, iTunes will detect an iPhone in recovery mode. Restore using the stock / non-modified iOS 4.1 firmware. After the restore is over, you will be able to restore your last backup (I was able to restore from 4.2 to 4.1, but if you get an error (besides the "backup session" pirated users are getting...) then you can just use any of the previous backups in the list (iTunes does a full backup before doing a firmware update, so if you look in your backup history, you should see at least 2 backups dated from the day you did the 4.1 to 4.2 upgrade, one from before the upgrade, and one from after the upgrade. Obviously you will want to take the first first one).

  • Restoring contacts after software update

    After software update i accidently clicked something like "treat as new iphone" instead of "use existing settings". Now I can synch programs and music but my contacts are gone. Is there a possibility to restore them?

    Unless you have been syncing your contacts with an app on your computer (Outlook, Mail) or cloud (MobileMe, Yahoo, Gmail, Exchange) as you should have, the contacts are permanently gone.

  • Can't restore iPod after seeing the "Exclamation point folder icon"

    My iPod showed me the "Exclamation point folder icon" out of the blue... i tried resetting, restoring (upgraded to 7.1 in the process) but when i connect the ipod to my computer it still shows me the icon, then the Apple sign, then "Do not disconnect" (while charging) and then the ipod itself starts clicking...
    any help would be GREATLY appreciated!! very furstrated over here...

    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Can't launch Safari after Software Update

    I can't start Safari anymore and I don't know what to do. In short, click on the dock and no bounce. Double-click on the icon within Applications and it doesn't launch either. These problems, I'm guessing are a result of the combination of objects delivered by Software Update yesterday. Based on the log below, I installed the following:
    2006-05-29 22:05:53 -0700: Installed "Pages Update" (1.0.2)
    2006-05-29 22:05:58 -0700: Installed "Apple Intermediate Codec" (1.0.1)
    2006-05-29 22:06:12 -0700: Installed "Keynote Update" (2.0.2)
    2006-05-29 22:06:52 -0700: Installed "GarageBand Update" (2.0.2)
    2006-05-29 22:07:42 -0700: Installed "iPhoto Update" (5.0.4)
    2006-05-29 22:08:04 -0700: Installed "Java 1.3.1 and 1.4.2 Release 2" (2.0)
    2006-05-29 22:09:01 -0700: Installed "QuickTime" (7.1)
    2006-05-29 22:09:43 -0700: Installed "iTunes" (6.0.4)
    2006-05-29 22:10:02 -0700: Installed "iPod Updater 2006-03-23" ( )
    Additional problematic behavior includes:
    (1) other applications saying OS X is not 10.3.8 or higher
    (2) can't launch Software Update from the Apple menu or from the "About This Mac" window
    (3) can't see the system version in "About This Mac" (shows the serial number instead)
    (4) can't run a bunch of other apps (Dashboard, iMovie, iChat, Sims 2 University)
    Any clues? Am I in the right forum?
    iBook G4   Mac OS X (10.4.2)  

    (3) in About This Mac click on the serial number and it should cycle through the Mac OS version, build, and serial number. Run Repair Disk Permissions then run Software update again. There might be other updates available. After each update run Repair Disk Permissions.

  • Can't Open Mail after security update 10.6.8

    I can not get the mail app to run.  This is the error message I keep getting.
    Did the SecUpd2012-004 update.
    After the update, I had (and still have) 2 copies of mail in my application folder.
    I've repaired my permissions.
    Tried to got back using the time machine (that was a waste of hours).
    Also, deleted the mail app (8.1) and then reinstalled the SecUpd2012-004.
    Only thing I haven't done is to do the Combo 10.6.8 update.
    I've noticed that other people are starting similar threads.  Anybody have a solution?  I've been working on it all day and no joy.
    Thanks in advance.

    Well, I thought that we might have had a solution, but no such luck.
    I did the combined update - and after that I had only one Mail app in the applications folder (encouraging) - and it appeared to be the correct one by it's icon.
    Thought about doing a repair permissions but didn't do it after the combined update.
    After the combined update, I did the secUpd, the second mail app was there with it's generic icon again and
    Needless to say, I'm back to square 1.
    So, I'm thinking I've got some options here.  One of my options would be to get another HD, slug it into one of the open HD slots, take out my 10.6 CD format it and then if possible use time machine to put that drive in the state where everything worked right before the update.  This would seem to be the fastest, time wise way of making the issue go away.
    You guys think I could / should delete the 4.6 mail app and start over with the combined update and then do a permissions repair after the update?

  • I can't send email after iOS7 update...

    I can't send email after the iOS7 update....this is a show stopper for me.   When is a fix expected?

    First it would help if you explain exactly what happens when you send an email. 
    Do you get an error message?
    If so what does the message say?
    The abilitly to send or receive emails does not fall on Apple or the IOS 7.
    You email provider gives you that ability.
    Double check and make sure your outgoing mail server is correct.

  • Why i cannot restore back after software update?, why i cannot restore back after software update?, why i cannot restore back after software update?

    Why i cannot restore back after update software?

    What does "restore back" mean?
    If it means go backwards to some earlier version of iOS, then Apple has never allowed that.
    If it means reload the contents of your iPhone after doing a software update, you should be able to do that.

  • Can't mount anything after e2fsprogs update

    I can't mount any cd/dvd, usb flash drive after e2fsprogs update. Here is what I get after inserting 8GB flash with ntfs and 512MB fat32 flash...
    It shows up in nautilus as a device but i can't mount it at all, no errors are shown...
    Sep 21 14:27:47 vostro kernel: [ 735.983176] usb 2-1: new high speed USB device using ehci_hcd and address 3
    Sep 21 14:27:47 vostro kernel: [ 736.100935] usb 2-1: configuration #1 chosen from 1 choice
    Sep 21 14:27:47 vostro kernel: [ 736.156481] Initializing USB Mass Storage driver...
    Sep 21 14:27:47 vostro kernel: [ 736.157220] scsi5 : SCSI emulation for USB Mass Storage devices
    Sep 21 14:27:47 vostro kernel: [ 736.157402] usb-storage: device found at 3
    Sep 21 14:27:47 vostro kernel: [ 736.157405] usb-storage: waiting for device to settle before scanning
    Sep 21 14:27:47 vostro kernel: [ 736.157428] usbcore: registered new interface driver usb-storage
    Sep 21 14:27:47 vostro kernel: [ 736.157432] USB Mass Storage support registered.
    Sep 21 14:27:52 vostro kernel: [ 741.158402] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
    Sep 21 14:27:52 vostro kernel: [ 741.158778] sd 5:0:0:0: Attached scsi generic sg2 type 0
    Sep 21 14:27:52 vostro kernel: [ 741.159467] usb-storage: device scan complete
    Sep 21 14:27:52 vostro kernel: [ 741.167628] sd 5:0:0:0: [sdb] 15695872 512-byte logical blocks: (8.03 GB/7.48 GiB)
    Sep 21 14:27:52 vostro kernel: [ 741.168872] sd 5:0:0:0: [sdb] Write Protect is off
    Sep 21 14:27:52 vostro kernel: [ 741.168881] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
    Sep 21 14:27:52 vostro kernel: [ 741.168886] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    Sep 21 14:27:52 vostro kernel: [ 741.171113] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    Sep 21 14:27:53 vostro kernel: [ 741.171123] sdb: sdb1
    Sep 21 14:27:53 vostro kernel: [ 741.386723] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    Sep 21 14:27:53 vostro kernel: [ 741.386733] sd 5:0:0:0: [sdb] Attached SCSI removable disk
    Sep 21 14:28:58 vostro kernel: [ 806.838311] NTFS driver 2.1.29 [Flags: R/W MODULE].
    Sep 21 14:28:58 vostro kernel: [ 806.848322] NTFS-fs error (device sdb): read_ntfs_boot_sector(): Primary boot sector is invalid.
    Sep 21 14:28:58 vostro kernel: [ 806.848332] NTFS-fs error (device sdb): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
    Sep 21 14:28:58 vostro kernel: [ 806.848340] NTFS-fs error (device sdb): ntfs_fill_super(): Not an NTFS volume.
    Sep 21 14:33:14 vostro kernel: [ 1062.798189] usb 2-3: new high speed USB device using ehci_hcd and address 4
    Sep 21 14:33:14 vostro kernel: [ 1062.916091] usb 2-3: configuration #1 chosen from 1 choice
    Sep 21 14:33:14 vostro kernel: [ 1062.924511] scsi6 : SCSI emulation for USB Mass Storage devices
    Sep 21 14:33:14 vostro kernel: [ 1062.924766] usb-storage: device found at 4
    Sep 21 14:33:14 vostro kernel: [ 1062.924772] usb-storage: waiting for device to settle before scanning
    Sep 21 14:33:19 vostro kernel: [ 1067.925385] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
    Sep 21 14:33:19 vostro kernel: [ 1067.925753] sd 6:0:0:0: Attached scsi generic sg3 type 0
    Sep 21 14:33:19 vostro kernel: [ 1067.928538] usb-storage: device scan complete
    Sep 21 14:33:19 vostro kernel: [ 1067.934135] sd 6:0:0:0: [sdc] 978688 512-byte logical blocks: (501 MB/477 MiB)
    Sep 21 14:33:19 vostro kernel: [ 1067.936023] sd 6:0:0:0: [sdc] Write Protect is off
    Sep 21 14:33:19 vostro kernel: [ 1067.936028] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
    Sep 21 14:33:19 vostro kernel: [ 1067.936030] sd 6:0:0:0: [sdc] Assuming drive cache: write through
    Sep 21 14:33:19 vostro kernel: [ 1067.938453] sd 6:0:0:0: [sdc] Assuming drive cache: write through
    Sep 21 14:33:19 vostro kernel: [ 1067.938457] sdc: sdc1
    Sep 21 14:33:19 vostro kernel: [ 1067.942248] sd 6:0:0:0: [sdc] Assuming drive cache: write through
    Sep 21 14:33:19 vostro kernel: [ 1067.942264] sd 6:0:0:0: [sdc] Attached SCSI removable disk
    Arch x86_64, Gnome
    Linux vostro 2.6.31-DELL #1 SMP PREEMPT Thu Sep 10 09:39:12 CEST 2009 x86_64 Intel(R) Core(TM)2 Duo CPU T5670 @ 1.80GHz GenuineIntel GNU/Linux
    Last edited by combuster (2009-09-21 12:36:37)

    Ok, it's not kernel either, I've upgraded gnome to 2.28 and now it reports "Can not mount LABEL, Not authorized"
    at /etc/group
    root::0:root
    bin::1:root,bin,daemon
    daemon::2:root,bin,daemon
    sys::3:root,bin
    adm::4:root,daemon
    tty::5:
    disk::6:root
    lp::7:daemon,combuster
    mem::8:
    kmem::9:
    wheel::10:root,combuster
    ftp::11:
    mail::12:
    uucp::14:
    log::19:root
    locate::21:
    smmsp::25:
    http::33:
    games::50:
    network:x:90:
    video:x:91:combuster
    audio::92:combuster,mpd
    optical::93:combuster,hal
    floppy:x:94:hal
    storage:x:95:combuster,hal
    scanner:x:96:
    power:x:98:combuster
    nobody::99:
    users::100:combuster
    dbus:x:81:
    combuster:x:1000:
    policykit:x:102:
    hal:x:82:combuster
    avahi:x:84:
    camera:x:97:
    gdm:x:120:
    mpd:x:45:
    vboxusers:x:108:combuster
    Last edited by combuster (2009-09-22 11:17:12)

Maybe you are looking for