Can I reuse existing KM layoutsets in webdynpro iView?

All,
I have a requirement where I need to display and navigate the KM repository( in my case a custom one) in a webdynpro iView. I already have built this custom repository, configured and can view/navigate the same from KM Content Page. Is there any way I can display the same repository in the same layout as I see from KM content page from a webdynpro iView? Can I reuse the existing layout set? Or would I need to custom code to recreate a tree structure?
Thanks,
Seema

Yes I have the default layout and I can successfully view the repository from KM Content page. But my requirement is to build a webdynpro iView and show a similar layout so that the user would not need to go to KM Content page to view the same. I need to integrate this webdynpro iView as a part of a bigger application we will be having.
Thanks,
Seema

Similar Messages

Can we reuse existing application name if i renamed existing application while updating application.

Hi I want convert my existing application universal to ipad app. but this is not possible. But if i rename my app name and submitted to appstore for review. Then can i reuse my existing app name again?

You can use CIM to configure the storefront.
It will give you an option of configuring storefront with/without publishing.
By CIM you can configure the database/application and servers.

SAP Portal Network - WebDynpro iView and SAP Application iView sharing

Hello All,
I've read about the restrictions in SAP Portal supporting the WSRP standard for application sharing. Mainly WebDynpro iViews and SAP application iViews sharing is not supported. That is in the case of a SAP Portal as producer and Non-SAPPortal as consumer.
I'm interested in a WebDynpro iViews and SAP application iViews sharing in a only-SAP Portals Network, where SAP Portals act as producer and consumer.
I've heard about the Remote Role Assignment and Remote Content Copy that are used in such case. I would like to ask if anyone knows if these can help overcome the restriction in sharing WebDynpro iViews and SAP application iViews that is present with WSRP? And if the advantage of WSPR, that is the application execution and rendering on the producer side, and as follows decreasing of bandwidth usage, is remaining in the case of the Remote Role Assignment and Remote Content Copy.
Thanks,
Mladen

Hi Manish,
for sharing content between SAP and non-SAP Portals, your case, refer to
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/23fb36cad10d23e10000000a1553f7/frameset.htm
All the possibilities and restrictions of WSPR in the case of SAP EP are explaind there.
For sharing content between only SAP Portals refer to my other thread:
Portal Network - Content Sharing
Hope it helps you!
Mladen

Can I use logical databases in a WebDynpro ABAP program?

can I use logical databases in a WebDynpro ABAP program?
I need to build a WDA screen that is similar to the SAPDBPNP selection screen (user can find the personnel number based on several criteria, such as last_name/first_name of the employee). So it seems that the existing logical databases have already many nice features already built (like the selection screens, the logic behind the screens etc). So I was wondering if/how I can use them in my WDA application.

Hello, Tiberiu.
You cannot use LDB directly within your WDA programa. BUT, you can fetch results from this LDB by using FM LDB_PROCESS. This function module can be called anytime from any kind of ABAP program. But you will still have to create the screen, as it only processes data, not screens.
Regards,
Andre
PS: Pls reward points if it helps.

Can i reuse my WD Java applications developed in NW7.0 in CE 7.1

Dear SDNs,
I have developed a MDM related Workflow applications using WebDynpro Java in NetWeaver 7.0 version and now we are switching to NetWeaver CE 7.1 version. in that case how can i reuse my WD applications in NW7.0. will the direct redeployement work in CE 7.1 server?
Please confirm me.
Your inputs will be appricated.
Thanks in advance,
Sireesha.

Refer to below link for WD migration:
https://cw.sdn.sap.com/cw/docs/DOC-136995
https://cw.sdn.sap.com/cw/docs/DOC-136998/diff?secondVersionNumber=3
Hope it helps
Regards
Deepak

Reuse existing interfaces

Hello experts,
Could someone please help me understand what the best approach would be to reuse existing interfaces.
For eg: I have a FIle to iDoc scenario. Now I would need to create another scenario say for eg; File to web service.
How best can I make use of the File side development which I am already done with.
I am a newbie trying to learn PI. I am on PI 7.1 EHP1.
Thank you.

Scenario: We have three different interfaces.
a) File to File
b) File to web service ( Sender interface is similar to Sender of (a) )
c) web service to File ( Receiver interface is similar to that of (a) )
I will be creating 2 SI's. Each for Inbound and Outbound.
There will be one BO ( I am assuming this to be PI )
SI - Inbound will have two operation's, one for file and the other for web service.
SI - Outbound will have two operation's, one for file and the other for web service.
The number of SI wil depend of the kind of data to exchange. if those interfaces dont have nothing in common (data) yuo will have to define
2 outbound SI for file and another for web services.
now, the first two file exhange common data ( data concerning customer) you can define 1 SI_customer with two operation and another SI for the web services and another for the inbound file structure (scenario c)
when modeling will depend as i mentioned before of the kind of data.you wil define 2 models (one for interface a and b) and a second model for your interface WS-File(c)
take a look to this presentation:
PI Best Practices: Modeling
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/303856cd-c81a-2c10-66bf-a4af539b8a3e?quicklink=index&overridelayout=true
if it is no clear let me know
Edited by: Rodrigo Alejandro Pertierra on Sep 24, 2010 12:18 PM

Reuse existing MaxDB datafiles during migration

Hello all,
We did test heterogeneous migration of the SAP system with MaxDB 7.7 using SAPInst together with Migration Monitor. Now we are planning to proceed with productive migration.
Creating of datafiles during test run took 4 hours, so I am interested if there is some how to reuse existing datafiles and logfiles of MaxDB. Because when I configure SAPInst and I define number of log volumes which I need, SAPInst is asking if I want to reuse the logfiles (I respond "OK"). But when I configure number of datafiles which I need, I just receive input error regarding not enough of free space.
Is there any way how to reuse these MaxDB datafiles and not deleting and recreating it ?
Thanks in advance for any suggestions.
Best Regards,
Emil

> Is there any way how to reuse these MaxDB datafiles and not deleting and recreating it ?
No, there's no way to reuse data volumes.
One of the reasons for that is, that the data volumes are chained over pointers in the respective volume headers and have to fit into the chain of data volumes. Also the the data volumes have to fit to what is configured in the database parameters.
You can however tell MaxDB not to format the data volumes, by setting the parameter FormatDataVolume (FORMAT_DATAVOLUME) to NO.
This setting however means that the volumes are not completely formatted and only the space is allocated at the file system.
Anyhow - are you positively sure that you need to perform a heterogeneous system copy?
Be aware that this is really only necessary when you want to switch the platforms byte-order.
regards,
Lars

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

Can I link existing skype accounts to my company a...

We have been using Skype at my company for some time now. Each employee has a personal Skype account they created. I created a Skype Manager account yesterday and am wondering if I can import their existing Skype accounts to merge them with the corporate account I created. Or, do I have to create new account for everyone? Any help would be appreciated. Thanks.

All Apple services use your Apple ID, so just sign into the service using the new ID you wish to use.
You will not, however, be able to transfer items purchased from the iTunes Store from an old Apple ID to a new one, nor will there be any way to change an existing iCloud account to a new one so that any documents or backups stored there will transfer over. Nor any way to change an existing iTunes Match account to a new Apple ID that I am aware of.
Regards.

HT5622 I'm currently sharing my apple ID with my wife. we'd like to create a new ID but are unable to associate her existng email address with a new apple ID. Is there a way she can maintain her existing email address while creating a new apple ID?

I'm currently sharing my apple ID with my wife. We'd like to create a new ID but are unable to associate her existing email address to a new apple ID. Is there a way she can maintain her existing email address while creating a new apple ID?

Leave her ID alone and create a new one for yourself with your email address.

Is there a way to create standard text messages that can be reused easily

is there a way to create standard text messages that can be reused easily

if you meant phrases, then Yes
Setteings> general>keyboard> add new shortcut

How can i access the EJB from a Webdynpro

Dear all,
How can i access the ejb , from a webdynpro?.
Is there any way to do that?.
I want to write the entire code (business functions) within the EJB and i wan to access the entire methods from a WebDynpro Application.This is the situation.
Please help me to , resolve this problem.(Here im using JDBC Connection .. etc.).
I want to do the basic connection setting's and data retrieval part within the EJB and use that within the WebDynpro..
how can i seperate this two(i mean, i want to seperate the JDBC connections and WebDynpro,i dont want to hard code any connection parameters within the webdynpro code)
So that i want use that saet of particular function's in many webdynpro applications..
(i dont need any help regarding webservice way.)
If anyone can , please help me..
I tried that javabean class , manifest file , that way (importing javabean model).
but im getting errors.
I cant properly utilize that..
So please help me with steps regarding that,,
for javabean
and if any , for EJB also..
with regards
Kishor.G

HI,
Since webdynpros follows Model View Controller Architecture You can access EJBs in webdynpro(views/frontend) infact to connec to database uding JDBC you have to utilise EJB ( opening connection to database closing, and other Business functionality).See this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/unkown/web dynpro tutorial and sample applications.faq#q-7
<b>How to access the Car Rental Web Service?</b>
Regards,
RK

Can we use EXISTS in where condition

hi all,
can we use EXISTS (instead of IN) in where condition of a query which is not part of a subquery ?
for e.g:
update gpf_vou_sm set up_amt=0 where src_cd exists ('1101','1201');
the query works fine with the IN operator in place of EXISTS.
anybody please help.
thomas k prakash

Hi:
You can use EXISTS in where clause but not in that syntax.
UPDATE gpf_vou_sm g
   SET up_amt = 0
WHERE EXISTS (SELECT 1
                 FROM gpf_vou_sm
                WHERE src_cd IN ('1101', '1201') AND id = g.id);Using IN in your case is better...
Saad,

Can I use logical databases in a WebDynpro for ABAP program?

can I use logical databases in a WebDynpro ABAP program?
I need to build a WDA screen that is similar to the SAPDBPNP selection screen (user can find the personnel number based on several criteria, such as last_name/first_name of the employee). So it seems that the exisinting logical databases have already many nice features already built (like the selection screens, the logic behind the screens etc). So I was wondering if/how I can use them in my WDA application.

Hi
Please let me also know the solution to this. I am a beginner to WebDynpro and want to know if I can make use of LDB's as we do in our normal HR programming do develop a WDA in HR.
Thanks and regards,
Uma.

Download content on one mac can i reuse for another?

Where is the downloaded content for the latest GB located?
can I reuse it?

No I haven't tried that. What might that do?
It will download about 5 GB of additional content that has been previously purchased. You can continue working with GarageBand, while the download proceeds, and if you interrupt it, it will resume the next time you start GarageBand.

Can I reuse existing KM layoutsets in webdynpro iView?

Similar Messages

Maybe you are looking for