Can I reuse original Mac OS X Install Discs

I want to get an iMac G4 or G3 to put in my room. Can I use the OS X install discs again so that I wont have to deal with Jaguar?

By "OS X install discs" do you mean your Tiger discs?
#1 Licensing agreements require you have a set of discs or license for each copy of Tiger you have installed.
#2 If these discs came with a machine and not as a general retail package they won't install on any computer other than the model computer with which they came.
#3 While you can get Tiger running on a G3 this may require upgrades to firmware and hardware. What you would need to do depends upon the model of G3 and its configuration.

Similar Messages

  • Can not boot from Mac OS X Install Disc 1, G5, Snow Leopard

    I have version 10.6.8 installed. Compter is a 2 x 2.66 GHz Dual-Core Intel Xeon. 6GB memory
    I want to run Disk Utility and startup from the install CD that came with the computer (the grey one, disc 1, or even the retail disc Mac OS X Snow leopard, the whit one) but I CAN NOT DO IT. So frustrating.
    I restart, hold down the "C" key, before the chime, after the chime, every which way, and my Mac always acts as if I am simply restarting, goes right to the login screen everytime. I tried holding down OPTION on restart to choose which to startup from, but only saw the hard drive as an option. I open System Preferences, Startup Disk and the install CD does not even show up as a choice to start from, yet the install CD shows up in the finder.
    What am I doing wrong?
    Thanks

    OK.
    According to  the knowledge base that model should have shipped with Tiger, 10.4.7.
    Going to need some thought here, though. I was going to suggest a possible problem with the optical drive, but you say the DVD mounts on the desktop as a normal DVD would?
    Nevertheless, do you have access to another Mac or an external HD with a bootable OS X on it (later than the Tiger version your Mac Pro shipped with)?
    If so, try booting from the external, or from the other Mac using Firewire Target Disk mode, and using DU from one of those sources to repair the MP's internal HD, then try the disc(s) again.

  • Trying to reset administrator password by using the Mac OS X Install disc to reset but it won't allow me to without original administrator password. Frustrating.

    Trying to reset administrator name/password by using the Mac OS X Install disc to reset but it won't allow me to without original administrator name/password. Frustrating. Reason I'm trying to reset is that it seems to be not recognising the administrator name as have changed password in System Preferences - Accounts.
    PowerMac, Mac OS X (10.5.8)

    Here's the instructions if you have the discs.
    *Mac OS X: Changing or resetting an account password*
    http://support.apple.com/kb/HT1274?viewlocale=en_US
    Changing your administrator password
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh655.html
    Here's one method to reset the password without the install disc:
    1. boot computer and hold the "apple" key and the "s" key.
    2. wait for terminal show
    3. release keys
    4. type without the quotes: "/sbin/mount -uaw"
    5. press enter
    6. type without the quotes: "rm /var/db/.applesetupdone
    7. press enter
    8. type without the quotes: "reboot"
    9. press enter
    This will let you create a new admin account when you reboot your computer.
    Also, without the discs, look at Mac OS X Tip - No Password, No Root, No CD? No Problem.
    http://www.macobserver.com/tip/2003/06/16.1.shtml
    Without the discs, try this (OS 10.5 only). *How to Reset User Password via single user mode*
    http://macosx.com/forums/howto-faqs/300019-howto-reset-user-password-via-single- user-mode.html
    Here is a way to get around not knowing the admin password on Macs.
    To reset your OS X password without an OS X CD you need to enter terminal and create a new admin account:
       1. Reboot
       2. Hold apple + s down after you hear the chime.
       3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
              * mount -uw /
              * rm /var/db/.AppleSetupDone
              * shutdown -h now
       4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again!
     Cheers, Tom

  • I have a MacBook with OS X 10.5.8 and I purchased a Mtn Lion OS up grade and it keeps telling me to install via the Mac App Store, but I can't get the Mac App Store installed on the MacBook it wants at least 10.6.6 so I seem to be stuck . Help

    I have a MacBook with OS X 10.5.8 and I purchased a Mtn Lion OS up grade and it keeps telling me to install via the Mac App Store, but I can't get the Mac App Store installed on the MacBook it wants at least 10.6.6 so I seem to be stuck . Help

    ChuckPhilyaw wrote:
    I have a MacBook with OS X 10.5.8 ...
    The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs  >  http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
    Be sure to make a Backup of your Current System Before Upgrading...

  • I have forgotten my administrator password and can't find my Mac OS X Install Dvd..what can I do?

    I have forgotten my administrator password and can't find my Mac OS X Install Dvd to reset it, what can I do?

    OK, try this:
    http://osxdaily.com/2010/08/10/forgot-mac-password-how-to-reset-mac-password/
    Be very very careful if you decide to use Terminal. Even a small typing error can cause a disaster. And terminal commands must be typed exactly as shown, including spaces.
    Good luck.
    p.s. Your Apple ID and password - different from the computer log in password - are what you used to get to this discussion.

  • How to repair disc on second partition iMac 27? 10.6.8, but second is still 10.6.3.  Can I use the original 10.6.3 install disc to start, and then go to the side needing repair?

    Partitioned iMac 27, Sept. 2010.  Verify disc on HD2 says "corrupted,  needs repair," unspecified.  "Use install disc to repair."  HD2 is isolated from Internet since birth.  HD 10.6.8, but HD2 is still 10.6.3.  Can I use the original 10.6.3 install disc to start, and then go to the side needing repair, without a problem?
    Part 2:  After 4 years, suddenly when HD2 is revived from sleep, it makes an Internet connection, all settings are the same, Network shows Ethernet is unplugged, but the indicator from modem shows connection.  Maybe connected to first part of my question, but maybe not.
    Thank you.

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • The mac os x install disc 2 doesnt run.........

    the mac os x install disc 2 doesnt run...........what can i do.??...im trying to erase and reinstall all system......but i cant....the disk #1 run ok..but the other one doesnt....
    Thanks

    Hi M.s.
    In your first post, your specs are posted as ibook Mac OS X (10.4.6).
    In your second post, they are macbook pro Mac OS X (10.4.6.
    And you have posted your Topic in the Mac OS X v10.3 & earlier forum.
    Which version of OSX are you trying to install on the iBook G4, and what type of discs are you using?
    The original discs that shipped with the iBook, or a Full Retail Version Jaguar, Panther, or Tiger?
    If you are using the Tiger system install discs that shipped with your MacBook Pro, that would explain why the installation is not successful.
    Model Specific discs, will very seldom work. And the discs that shipped with the Intel MacBook Pro will definately not work in the iBook G4.
    ali b

  • Boot From Mac OS X Install Disc

    Hi everyone after messing my computer up I am now trying an archive and install !!!
    Trying to boot up from Mac OS X Install Disc (labelled For Mac Computers) by pressing down the 'C' key whilst booting up. Everytime I do this the computer just restarts it self over and over again
    Can anyone tell me what I am doing wrong or if something is wrong with the disc
    Thanks everyone

    Hi jackVDP;
    It sounds like you aer using the generic Leopard DVD. Could it have an older version of Leopard that your Mac had originally? If so the Mac will not boot .
    Why are you not using the DVD that came with your Mac?
    Allan

  • TS2570 Question re: "Start from your Mac OS X Install disc; use Disk Utility"

    I've worked my way through the step-by-step trouble shooting in the TS2570 article up to "Start from your Mac OS X Install disc; use Disk Utility". So far, every step results in the same outcome - my formerly trusty 2007 Intel duo core iMac (24") will not start up, freezing on a grey screen with a blinking question mark on a folder. I don't completely understand this next step. I have both a Leopard and a Snow Leopard disc. I'm not positive whether these were for the iMac, or my old Macbook Pro. I assume this makes a difference.

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    A flashing question mark or globe appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Mac OS X install disc not installing drivers in Windows 7

    So I just installed Windows 7 Ultimate OEM 32 bit, and everything went (relatively) smoothly...
    The problem is that now I'm at the desktop and when I insert the Mac OS X install disc, I am not able to install drivers. Instead, I am prompted to either "remote install Mac OS X" on my MacBook Air or install DVD and CD Sharing on my MacBook Air. I don't own a MacBook Air nor have I ever used either the Windows 7 install DVD or the Mac OS X install DVD on a MacBook Air. What's going on, and how else can I install the proper drivers? Also, please note that I used the Mac OS X install disc to install drivers for Windows XP previously. Long story short, that installation expired (lost my CD key) so I had to start over with Windows 7. I know the drivers are there, why aren't they working?

    Sorry to state the obvious first, is it a Snow Leopard DVD?
    You can always browse the DVD to the correct folder for the drivers.

  • Is Mac OS X install media on Mac OS X Install Disc 1 or 2?  I have to reset my password because I forgot it.

    I need to retrieve my password.  It directs me to install insesrt the Mac OS X install media.  I have MacBook Mac OS X Install Disc 1 and 2.  Can somewhat direct me as to which intall disc I should use?  I don't want to mess up.Install disc 1 tells me to hold down C key as computer starts up which is what the reset password direction tells me to do.  Thanks for help! 

    Ok.  I put in install disc 1, restarted etc.  Went to utilities >reset password etc.  It would not save it for the Systems Admin root.  I tried four times including rebooting...the message said not save or general something didn't work.  grrr...any ideas?  thanks again for your time.

  • Missing Mac OS X install disc 2

    Hello there I have install my iMac I have install disc 1 and after disc one is asking me please insert the Mac OS X install disc 2 witch I don't have is there any other way I can get my iMac back to live thank you

    Okay,
    If you are missing one of the install discs, there are two things you can do.
    You need to contact Apple in order to get OS X 10.4 Tiger or OS X 10.5 Leopard from Apple assuming they still have copies.   Apple Store Customer Service at 1-800-676-2775  These discs will be replacement OS install discs.  You will need to give the rep your Mac model and serial number and you'll, also, need a credit card as there is a nominal fee of around $18 for processing and shipping of the disc.
    If Apple can't help you, then you can search on sites like Amazon for OS X 10.5 Leopard disc.
    OS X 10.5 Leopard is the last OS X version that you can run on a PowerMac G5.
    Good Luck!

  • Installing Mac OS X Install Disc Pls Help

    I am thinking of re-installing mac os x install disc (is it call leopard?) on my macbook, will the re-installation erase all my present photos, contacts and documents in my macbook?
    Message was edited by: fabiantec

    If you do an Erase and Install, then all your data would be lost. You can try the following instead:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Does a Macbook Pro 13 inches (Mid 2012) come up with a Mac OS X install disc?

    Does a Macbook Pro 13 inches (Mid 2012) come up with a Mac OS X install disc? What if some problems will occur regarding the OS? How can I fix it? Thanks.

    kennethlovesu wrote:
    Does a Macbook Pro 13 inches (Mid 2012) come up with a Mac OS X install disc?...
    No. Macs that came standard installed with Lion or later don't come with media, and, indeed, some don't even come with DVD drives to run media in.
    ...What if some problems will occur regarding the OS? How can I fix it?...
    Such Macs come with a hidden recovery partition. You can boot from that and restore the OS if that's what's needed, or run Disk Utility to repair the HD. Check out http://support.apple.com/kb/HT4718 for details.

  • Disk Utility repair and Mac OS X Install Disc not at hand

    Help needed!
    If i click "verify" in Disk Utility, i get "The volume Macintosh HD needs to be repaired." as answer. However "repair" needs to unmount the volume which is not possible because it's the system/boot partition.
    Currently, I dont have access to my mac os x install disc (DVD), which could be used to boot from and run disk utility. The dvd is locked away in my office in another country.
    Is there a way around this? Either by running disk utility's repair function while the system is booted or else by manually creating a boot cd/live cd?

    Yes, possibly.
    Boot into single-user mode. After startup is completed you will be in command line mode and should see a prompt with a cursor positioned after it. At the prompt enter the following then press RETURN:
    /sbin/fsck -fy
    If you receive a message that says "*** FILE SYSTEM WAS MODIFIED ***" then re-run the command until you receive a message that says "** The volume (nameofvolume) appears to be OK." If you re-run the command more than seven times and do not get the OK message, then the drive cannot be repaired this way.
    If you were successful then enter:
    reboot
    and press RETURN to restart the computer.

Maybe you are looking for