Can I rout audio on a PER APPLICATION basis?

Is there a way (third party software included) to rout audio on a *per application* basis? I'd like internet audio (Safari, etc.) to go to just the normal line out, while iTunes audio would be sent to digital audio out.

I've heard that audio hijack pro can do this.
http://www.rogueamoeba.com/audiohijackpro/
I don't use it myself but check this post for example
http://discussions.apple.com/thread.jspa?messageID=9299023&#9299023
Message was edited by: V.K.

Similar Messages

How can I Route audio signal from DIGI002 via SPDIF into Express or Pro

i have tried many things and cant seem to get it to work..
trying to route output from DIGI002 SPDIF into Logic Express 7.1
can it be done in Express or do i need PRO?
Using PTLE7.0
OSX 10.4.3
Logic Express 7.1
Core Audio Driver 7.0
Of anyone can offer a fix for thisi'll be upgarding lo Logic Pro and ***** off Protools for good.. logic makes much better use of the CPU than PT ever did.. its amazing what you can get out of a laptop running Logic.

Model Name:    MacBook Pro
Model Identifier:    MacBookPro4,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.5 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    6 MB
Memory:    4 GB
Bus Speed:    800 MHz
Boot ROM Version:    MBP41.00C1.B00
SMC Version (system):    1.27f3
Serial Number (system):    W8*******YJY
Hardware UUID:    ***************
Sudden Motion Sensor:
State:    Enabled
<Serial Number Edited by Host>

Is there software that lets you select audio output options per application

Hi all,
It would be really cool if on my MacBook I could run iTunes over my external speakers and system notification sounds over my internal speakers (incl. Skype ringing etc.)
Do you know if there's any software like that available?
Thanks.

Thanks both of you. Guess I'm just looking for a simple as **** way of just going into a menu and saying
-> I want this kind of sound to come from my external speakers
-> And hits sound to come from my built-in speakers
Preferably also make that work with profiles, so I've got one profile for Headphones & one for External Speakers...
But I might be picky right now...

Adobe Presenter can not use audio output after 10.8 upgrade

Hi,
I just upgraded from Snow Leopard (10.6.8) to MTL (10.8). All went smooth apart from the fact the when I launch adobe presener (flash) over any browser in MacOS, it can not play the audio part. It used to with 10.6.8.
The problem persists after rebooting the Mac. Other Apps (iTunes) use the audio just fine. So, it's something specific to the path of code that Adobe flash is using (?). The funny part is that when I launch VMware Fusion and a Windows7 VM, I can use the audio for the same application. So, it's the MAC part that's broken. Any ideas? Maybe I'm missing an updated plugin or something?
regards,
Thanos

There's no change if I hold command-R to boot into recovery. The mac chimes on powerup but nothing else seems to happen.
The machine has an SSD drive in it so I can't even listen to hear if it is loading anything or acting differently when I try different keypresses.
As I had some spare RAM lying around, I've tried swapping that in but no change there either. I still suspect it's a software rather than hardware problem, but without any way to control the boot up, I'm not sure how I can fix it.
I do have remote time machine backups - is there any way of restoring these manually, perhaps by removing the drive from the mac and copying the backup data over using another system? (Unfortunately I don't have any other mac systems to experiment with this, though)

5508-DHCP per WLAN basis

dear all,
kindly guide me how to configure WLC 5508 internal DHCP per WLAN basis , i read the following document it is clearly mentioned that we can configure DHCP on WLC 5508 per WLAN basis. but i did not find the configuration per WLAN basis
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70wlan.html#wp1293808
need your kindly response
my email address
[email protected]

When you configure dynamic interfaces on your 5508, you can specify DHCP server IP address. Later on you will map a dynamic interface to WLAN.
Also under WLAN advanced setting, you can specify DHCP server IP, if you want to override dynamic interface configured DHCP server to a particular WLAN.
HTH
Rasika
**** Pls rate all useful responses ***

Can Apple Remote Desktop route audio to selected computers across network?

Can ARD be used to route audio output (e.g. from iTunes) across the network? If not, suggestions would be appreciated.
I remember that there was a -display option on Unix commands that let us run applications remotely and wondered if that might be a start to getting this task to work.
The intention is to feed audio-streamed data out to networked iMacs for use during classroom tests, controlled from a central admin computer in a different room. None of the classroom iMacs in question have iTunes on them, since it was removed to keep the machines more focused on classroom activities.

Sorry but no, ARD does not support audio across the network in any form.
Airfoil supports streaming of audio to other computers. I don't know if it will stream to multiple computers simultaneously, but you could check.
Regards.

How can one use one specific security realm per application ? The realm-name attribute of the login-config tag of web.xml does not make any difference

Hi,
I have different sets of users coming from different databases and using different
roles mapping for each of my web applications. I would like to configure a specific
security realm per application in my weblogic server 7.0 . Is it possible ?
I try to specify the realm-name of the login-config tag from the web-xml deployement
descriptor but it doesn't make any difference. The default realm is always used.
I also would like to tell the Weblogic server to use the default realm in case
the realm isn't specified or isn't found. For example, the default would contains
my admin users.
Thanks a lot for your answer.
Iz

I thik this is a common mistake the ralm-name tag in the deployment descriptor is used
just by the browser for display purposes (when it opens the basic auth dialog box) so as
of now there is only 1 active realm which can have multiple providers as Kevin pointed
out
Kevin Lewis wrote:
WebLogic 7 now ignores the realm-name tag (I found that out yesterday).
My understanding is that there is only one realm active at a time for a domain
(I would be interested in being contradicted in this).
However, you can have multiple providers in each category of a realm: authentication,
authorization, etc. Therefore, what you can do is key authentication, et al,
off of some other information. We have our users enter their company, for example,
and use the TextInputCallback to get it. You could also encode something in the
initial page, based on the URL they hit, or whatever, and get that back in your
callback.
You can store that information in your own Principal implementation, and key off
of that in your authorization provider, going to a different database as appropriate,
or abstaining when a specific provider doesn’t have anything to say about a subject.
Anyway, there should be a way to do it, even if it's more complex than you would
have hoped.
--Kevin

Routing audio to "system settings" from application?

Hi
This is a bit of a specialist one I am afraid.
In the new version of Logic Pro X (10.0.7), there is an audio routing option to route audio "To system settings".
This is ideal for us, as we have many audio workstations in a computer setup, and we use an Apple TV and Airplay on the classroom whiteboard for mirroring, and when the student mirrors their computer up to the Apple TV the sound from Logic Pro follows, and the class can hear. (Usually they are using a local Firewire device on headphones).
What I'm looking for is a way to route audio from software which doesn't have this option into the System setting, i.e. Sibelius 6. Sibelius mandates you choose an audio device to route to, and doesn't change when you mirror to Airplay - it stays on the selected device.
Sibelius will mirror to Airplay if you set it up deep as a menu option, but this isn't pretty as the audio output device is buried deep in a submenu and requires changing and them changing back to local every time the student mirrors. It isn't user friendly.
I'm wondering if I can do anything like route through Soundflower or any other virtual sound card, or another driver, which will allow this change. Soundflower routing into Logic, and Logic outputting to System Setting would work, but it's seriously clunky.
Any advice welcome.
Thanks, Tom

Hi Vasanthakumar,
have a look at those settings by Shravan:
Re: Steps to define correctly IDoc sender adapter
you don't have to do point 4
Regards,
michal

How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?

How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?

Attach camera via USB or put card in card reader.
Go to FCP, and go to the Log and TRANSFER window.
If FCP recognizes the card, you will see your clips listed on the left.
You can view them, set Ins and Outs, and import just what you want.
Once you choose a section of video and import it, FCP converts (transcodes) from its original camera format to Apple ProRes422 - a more edit friendly video file.

How can I route my audio interface inputs to Logic Express inputs?

Hello,
Logic Express can 12 inputs to record audio on.... fair enough.
My MOTU Traveler, together with ADAT connected Mackie Onyx 800F have 16 inputs...
How can I use the first 4 inputs (XLR) together with the last 8 input (ADAT)
Logic only seems to count from 1 to 12!
(After reading the manual, It seemed to be solved by making new Audio Input Objects in the Environment, but unfortunately these objects where removed from Logic Express)
Does anybody have the solution?
Thanks a lot.
Greetings,
Mark

Hi Michael, thanks a lot!
Unfortunately it didn't solve my problem yet. I tried
the audio/midi utility and found that the inputs
can't be turned off. Is there not a environment patch
possible, that I can load that puts the inputs in the
right order? I hope so!
Greetz,
Mark
The Environment doesn't route audio; it routes MIDI. There are audio objects IN the Environment, but you can't shuttle audio around like that.
You have to remember that LE is an entry-level piece of software. You might think Garageband is entry level, and I think it should be, but in reality, LE is VERY crippled. Don't get me wrong, I'm not ragging on Logic as a program; I think Logic is great. But Apple has made some poor choices with respect to the features of LP that get crippled in LE.
Sorry to digress from your original topic, but I think this is a bigger issue. The difference in price between LP and LE is enormous. That difference should be due to the fact that LP has plugs and effects (and other fairly esoteric features, like surround mixing, that most people don't need), and that justifies the price difference. Remember, when Emagic sold Logic (pre-Logic Pro 6), those effects and instruments cost a LOT more than the difference between LP and LE. LP is really a steal for what you get. LE is a poor substitute.
Seriously, LE is a lot less than just a lite version of LP; it's crippled by things like the 12 input/output thing (what is the point?), the useless Auxes, and numerous other little things that keep it from really competing with other 'lite' sequencers like Cubase SL or Audiodesk.
Anyway, I think the answer to your question is, if you need to record more than 12 simultaneous tracks, or you need flexibility in accessing your hardware's inputs and outputs, you need a better program.
Fortunately, the upgrade cost to LP isn't that much, nor is the crossgrade to Digital Performer...

Can itunes playback be paused when another application (such as Quicktime) plays audio?

I listen to music using iTunes all the time on my Mac. However I am constantly having to listen to snippits of audio from recordings that I have made, and I would ideally like to briefly pause iTunes during playback.
Is there a way to automatically cause iTunes to pause its playback when another application generates audio output? When you make a call on Skype this seems happens, and so I just want to replicate this functionality on other applications that can play back audio files.
PS: I know I can simply go to iTunes and pause it, but hey, this is all about finding really easy ways to do things you do a lot and it's annoying (and distracting) to have to do all those extra keystrokes.
thanks
Steve

Hate to say it but its still a problem with iTunes although better with 7.0.1.... at least on the Win side of things.

Dual Ethernet G5; can I route applications to a specific ethernet port?

I have a G5 with dual ether net ports. I also have two networks; one Cable Modem, and one FIOS. Can I route certain programs, such as Fetch, safari, etc. to use a specific network?
For example, I want the Digidelivery Client to always use the cable internet connection, while Safari and Fetch use the FIOS. I want to know if it is possible without switching locations.

Thank you for your response. Can tell me how by an example, my attempts were unsuccessful.

EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)....

The Issue :
The steinway piano. exs can be seen in 'Library/ Application Support/ Logic / sampler instruments / Acoustic pianos - when double click on it ''Can't be open''
c
Same in Garageband & MainStage
When launching Logic pro , Garageband or MainStage : EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)..
After having spoken on phone to a technician (Apple support ) ,i followed his instructions which was to '' Download Additional Contents via the Logic Pro menu:'' ( I've Downloaded twice already) but the issue was unresolved ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)..
Then last night i tried : Via the LOGIC PRO MENU : Click on '' Download Additional Content then select ''Logic Pro & Mainstage Essential Contents'' click install .
It took about 2 hours and finally afterwards when loading song in logic pro ; steinway piano was still there but this time it worked same for Garageband & MainStage.

"Additional Contents" I don't even know what that is? What app is it for?

Presonus Firebox problem: I can see the audio levels but can't hear. Help!

Searched in the forums to what I think is a basic issue, but couldn't find anyone with an answer...
I have audio routed into my firebox from an external mixer. I can see the audio meter in the "in" sound panel of system preferences moving but I can't hear sound coming out of my soundsticks.
Audio routed out of my computer into external amp/stereo setup is audible, however.
Can anyone help me figure this out so I can move and and start setting Firebox up with Logic? LOL
My hardware specs (I'm running 10.4.11):
Hardware Overview:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 2
CPU Speed: 800 MHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1.5 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.2.5f1
Serial Number:
Sales Order Number:

Your memory serves you well.
Yes, line outs from the mixer are hooked up to line ins 3&4 on the back of the firebox. What I can't figure out is that the Sound Panel of System Preferences shows a good input level, whereas the meter in Logic shows nothing (rec is enabled and blinking). If I switch cables to the 1&2 instrument ins on the front of the Firebox, I get levels in both Sys Prefs and Logic. I'm thinking, the problem can't be the Firebox, because the computer sees the signal either way. I'm running Logic 6.0 Platinum BTW.
I find Presonus and their manual to be lacking. They take days to write back with curt responses... Either they don't have enough people or the Firebox is not expensive enough for them to devote to customer service... I don't know

Per Application Volume Control

The one decent thing I have noticed about Vista is that it has an easy to use per-application volume control. I haven't seen anything like this in Leopard so far. Does anyone know if there is a free third-party application that can be used for this type of thing. I have looked in Audio Hijack Pro but it is a little more than I was looking for and much more complicated than the Vista application.

If there is you would find it at VersionTracker or MacUpdate.

Can I rout audio on a PER APPLICATION basis?

Similar Messages

Maybe you are looking for