Can I run a 2560x1440 monitor with the envy dv7t 7300

Can I run a 27" WQHD 2560x1440 ips monitor at full res with my Envy DV7t 7300. I7 quad 2.6 GHz, GT650m 2gb ?
Thanks, Cesar

Hi linacjsdad,
Thank you for your query, I will do my best to help.
If you connect the monitor with a HDMI connection it will support the highest resolution.
Your HD 7670M DDR# graphic card will support resolutions of 2560x1600 which is higher then the monitor, therefore you should not have an issue. Specifications of the AMD Radeon HD 7670M DDR3 GPU
HP ENVY dv7 Notebook PC Maintenance and Service Guide Please note chapter 2 pages 3 and 4.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

Can I run a 2560x1440 monitor with HP Pro 3381 MT

I have a Desktop 27 inch which has model "HP Pro 3381 MT" and monitor`s resolution is 1366*768 .
My OS is IOS hackingtosh.
I want to run with my PC as IMAC with 2560*1440 resolution.
Can I solve this problem?

Hi,
It does nit say much from the following information:
http://browser.primatelabs.com/geekbench2/2432849
Looks like it is an old machine it may not be able to drive a high resolution monitor. And you need a monitor first.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

M6 pavilion 1006tx, Can I run a 2560x1440 monitor

Can I run a dell u2713h 27" WQHD 2560x1440 ips monitor at full res with my M6 pavilion 1006tx. I7 3612qm 2.1 GHz, AMD HD7670M DDR3?
M6 pavilion 1006tx HDMI can support 2560 x 1440?
Monitor- Dell u2713h
M6 pavilion 1006tx
i7 3612qm 2.1ghz
amd hd7670m ddr3 2gb
HDIM cable connet
thanks!
This question was solved.
View Solution.

Hi @TONYOOI ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion m6-1006tx Entertainment Notebook PC and running a monitor with a HDMI cable. Here is a document on changing the HDMI display settings to fit your Screen and to check your settings and to troubleshoot specific problems.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Can I run an HDMI monitor from the Firewire port of my MBP?

This may be a strange one
I am running a late 2011 17" MBP running Mavericks (latest version as of July 2014).
Currently I have a 4TB external thunderbolt drive attached. There is no thru port.
My challenge is, I want to connect an external HDMI monitor, but this MBP only has the one Thunderbolt port, being used by the external drive.
My hope is, that somehow, I might be able to MacGyver something using the Firewire port since I cannot afford another monitor with a TB through at the moment....Technically the cabling would be possible, albeit a bit freakish.
Something like:
Firewire cable out from MBP, plugged into a FW to Thunderbolt converter, thunderbolt converter tip plugged into a MiniDisplayPort to HDMI converter box (like the Monoprice MMP-MDP2H01), then from there to the HDMI monitor.
Would the MBP detect the monitor and route the video signal through the FW port accordingly?
Looking forward to some expert advice and any zany workaround suggestions you all might have!
Respect.

The MDP to HDMI will work fine.
Captfred

Can I run two 2560x1440 monitors (dual link DVI) on a new Mac Pro?

I have two Monoprice Zero-G IPS monitors, which can run at resolutions of 2560x1440 using a dual-link DVI adapter. This is what I am currently using on my old 2008 Mac Pro.
If i get a new model Mac Pro, could I continue this arrangement at the max resolution by using two Thunderbolt/Minidisplay port to Dual link DVI adapters (and, I assume, using two of the USB ports as I do now)?
Frankly, I dont need the power of a new Mac Pro but my old one is long in the tooth. I'd get a retina Macbook and use it as my desktop, but I cant think of any way to run both monitors at full resolution on the Macbook Pro. I dont want to run them at HDMI resolution.
Thanks in advance!

Adapters go from $9 to $54, the latter having heat-sink which is not needed in an open cMP.
Some support both as in either or but not two at the same time, SATA interface on the PCIe afapter, or an M.2 type
While other PCIe "solutions" exist they are not OS independent or machine, the XP941 suffers from none of those concerns as it is bootable in all Mac Pro 1,1 thru 5,1, and is the only one for 200-7 models (and 2008 are iffy) so you can 'take it with you' if you move to a new cMP.
Old controller, you need two SSDs in RAID0 to get 900MB/sec writes.
Does not appear to be any of the real issues of PCIe slot and bus master, outside of you would exclude the 1x slot in the 2006 of course!
The hardest part? getting these tiny M.2 blades, which are ~ 1" x 3.25" and have a tiny screw, on the PCIe adapter.
250GB SSD today are ~$120 + many do want SATA III PCIe (to get 550MB/sec and allow continued use of 4 x SATA II drive bays) runs ~$80-299. In some cases you then need a 2nd SSD. So if you want speed (vs size) then $240 + $100 and the $300 for XP941 256GB isn't bad.
Finally, look for an Apple blade on ebay if running Yosemite - they vary, some are 2x (slow) M.2s and you want 4x but any are probably 700MB/sec and cost $400-700. No need with Apple part to worry about TRIM.
Comparing 128GB SATA II $83 + $15 adapter vs PCIe XP941 128GB $140 + $24 is a 'toss-up' in cost but not performance, and one frees up drive bay and uses PCIe slot. (Generally 250GB are faster and better, the 128GB use to have 135MB/sec writes and $40 extras for 550MB and double storage makes sense, you never want an SSD to get down to 20% free, and you want to have 11% set aside for over-provisioning).
So in a way you can get 1000MB/sec like nMP for $175-300 in any Mac Pro, and new faster blades are on the horizon offering 1400MB/sec.
Kind of amazing, that M.2 support is in that old EFI all along waiting

Can I connect dual vga monitors with the HP Pavilion p6724y

I'm looking at purchasing the HP Pavilion p6724y and currently have 2 vga monitors I'd like to use. Is this possiable?

Hi Stacey ,
Welcome to forum..
You need to get a video card with 2 VGA port .,, and install it on the computer to attach both monitor,,,
You can check local computer store for video card with 2 VGA port..
Click on the Kudos sign on left to say Thanks...

Can a macbook pro 13" retina (mid-2014) run 2 external monitors with 2560x1440 resolution?

Can a macbook pro 13" retina (mid-2014) run 2 external monitors with 2560x1440 resolution? If not what if I turn off the macbook internal display? I

Yes.
http://support.apple.com/en-us/HT204154
Ciao.

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

HT1386 Hi, I have an old powermac G4 laptop running OS X 10.5.8, can I sync my ipad mini with the version of itunes running on it?

Hi
I have a powerbook G4 laptop, A1095 running OSX 10.5.8
Can I sync my ipad mini with the itunes I have installed?
Regards
Gavin

Yes ... with regard to syncing. Actually, you need to be running OS X 10.6.8. This is copied from the iPad Mini tech specs website.
Apple ID (required for some features)
Internet access6
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 2 or later
Download iTunes at www.itunes.com/download

Can I use a Ipod Mini with the Nike running chip?!

I'm looking at buying a Ipod Mini, but I was told that it might not work with the chip in my running shoes from Nike! Is there anyone who knows if this is true or not!!

Can I use a Ipod Mini with the Nike running chip?!
No. Only the iPod nanos and the second generation iPod touch are compatible with it.
(36438)

How can I run 2 Dreamweaver windows at the same time?

How can I run 2 Dreamweaver windows at the same time on my
PC?
basically I have 2 monitors and I want to edit CSS on one
monitor and have the html page open on the other so I can quickly
look from one to another with in a split second instead of taking
that extra time to switch back and forth using the tabs at the top,
I know I should probably invest into a mac so i can work out side
of the Dreamweaver application window and I will in the future but
is there any way i can do this on my windows XP pro PC?
Thank you
Maurice

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

Can I run 2 different domains with same name but on 2 different machines?

I am trying to setup 2 domains with same name (sharedcds1) on 2 different machines (Machine1 and Machine2).
          When I start the weblogic managed server 1 (sharedcds1managedserver1) on Machine2, it throws an error saying it has some conflicts with the managed server 1 running on Machine1. How did the managed server of one machine know about the other server. Can I run 2 different domains with same name but on 2 different machines?
          Here is the error in the log -
          <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
          object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
          The object from 4596206652609838848S:130.170.61.153:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
          haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
          ore servers. Such objects can only be deployed from one server.>
          <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
          object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
          The object from 8842351474821025197S:130.170.61.154:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
          haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
          ore servers. Such objects can only be deployed from one server.>
          Thanks
          Satish

Yes you can. Make sure that domains configured to use different multicast address. WLS uses multicast for communications between nodes in domain.
          although your configuration will work, you could have troubles if you going to execute inter-domain calls between domains/servers with the same names.

How can I run a vga monitor and projector together on my Mac Pro 15"??

How can I run a vga monitor and projector together on my Mac Pro OSX 15"?

You can upgrade to Snow Leopard, Lion or Mountain Lion (coming next month), but you need Snow Leopard to upgrade to Lion or Mountain Lion. Check this web to know how to add memory to your computer and the memory that it supports (probably, 3 GB).

How can I run a vi developed with 7 Express?

How can I run a vi developed with LabView 7 Express on another machine ? Do runtime versions exist ?

Apparently, you want to run it on a machine that does not have LabVIEW installed.
To make a standalone executable of your LabVIEW program, you need to have the Application builder (included in LabVIEW professional and higher, avaliable as an add-on for base and full).
To run the application, the target system need to have the LabVIEW 7.0 runtime installed (available as a free download).
There is also the LabVIEW Player. In this case you need to digitally sign your VIs and there are a few limitations. It is meant for for sharing code ideas and is not a viable substitute for the appl
ication builder.
Of course you could also get a second copy of LabVIEW.
Some other options that would work in a very narrow set of situations: Read your LabVIEW license agreement. Under certain conditions you are allowed to install a second copy of LabVIEW on your home computer. If this is for personal educational use only and you qualify, you could also buy the LabVIEW student edition.
LabVIEW Champion . Do more with less code and in less time .

I can't use my Philips monitor with Mac mini

I can't use my Philips monitor with Mac mini, I am using a HDMI to VGA cable to connect them. But no signal on my Philips monitor.
My Mac mini is in a good condition, it can connect with my HDTV, the BENQ monitor at my office, but I can't make it connect with my Philips monitor.
I dun know what happen.
Please help!
Thanks!

The two are incompatible, HDMI is a digital signal and VGA is an analog signal. You need a monitor with a HDMI port or a DVI-I port, these are both digital signals. DVI-I gives the best output.

Can I run a 2560x1440 monitor with the envy dv7t 7300

Similar Messages

Maybe you are looking for