Can I run a LabVIEW 7.1 Application on a system with LabVIEW 6.1?

The VI App did not run properly, even after I installed the LabVIEW 7.1 Run time engine. Perhpas I need to uninstall the LV 6.1 run time engine? Thank you for any suggestions; perhaps it's something minor that I'm overlooking!

That shouldn't be a problem assuming that all the drivers (VISA, NI-GPIB, etc.) you need are installed. I haven't run a 7.1 exe yet but I've done it with 7.0 executables on systems with 6.0 and 6.1 development. What was the actual error code generated?

Similar Messages

Can I run more than one "main application" in the same JVM?

Hi,
We need a instance of JVM to run each standard application, Applet or Xlet?
Can I run more than one "main application" in the same JVM?
Thanks.

stdioo wrote:
Hi,
We need a instance of JVM to run each standard application, Ok
Applet or Xlet?You have no control over the first on a client machine. Presumably not the second either although I don't know what it is.
Can I run more than one "main application" in the same JVM?Application. Not applet.
You must have a class (code) to start each "application". To keep the environments clean from each other you can use a class loader.

CAn I run Lion and snow leopard on the same computer with different sign-ins?

CAn I run Lion and snow leopard on the same computer with different sign-ins?

Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

Logic Pro 9 (9.0.0). Message You can't use this version of the application Logic Pro 9 with this version of Mac OS X You have Logic Pro 9 9.0.0. I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic

Since upgrading to lion, I can't use Logic pro, hope someone can help. thank you
Logic Pro 9 (9.0.0).
Message
You can't use this version of the application Logic Pro 9 with this version of Mac OS X
You have Logic Pro 9 9.0.0.
I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

Since upgrading to lion, I can't use Logic pro, hope someone can help. thank you
Logic Pro 9 (9.0.0).
Message
You can't use this version of the application Logic Pro 9 with this version of Mac OS X
You have Logic Pro 9 9.0.0.
I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

Hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you

hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you

You cannot. If someone else told you there is a way then they will need to show you. After Effects requires a 64-bit system and the latest release requires Mac OS X v10.8 or v10.9 minimum

How can I run a labview executable file inside a VI

How can i add and run a labview executable file inside the vi and grab the output of the executable file to be used in the vi?
mytestautomation.com
...unleashed the power, explore and share ideas on power supply testing
nissanskyline.org
...your alternative nissan skyline information site

Hi cmdrb,
to run an executable you use SystemExec function.
To get the output of your (LabVIEW-made) executable you need to program some data transfer means: you may use network functions or file functions. In both cases your "LabVIEW executable" needs to provide that options…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can I run a LabVIEW app as a service in 8.2

I have need to run a LabVIEW created Executable as a Service using LabVIEW 8.2. I have heard 8.2 can host it but I cannot find any docs on this. Any help would be appreciated. SvcAny was not an option that worked.

I would suggest trying to add the exe to the services under Control Panel >> Administrative Tools >> Services. This should cause the exe to launch as a service.
Brian R.
District Sales Manager
Washington DC
National Instruments

How can I run an applet from an application (frame)?

I have an application (frame) that render images and save it, and then I want to create an animation with those images using Animator applet from the application itself, but I do not how to call the applet from the application, is this possible?
Thanks in advance, Jorge

You can simply run a JApplet in a JFrame. Just create a frame object, an object of your applet, add the applet to the frame and call the init() function of your applet. It could look like this:
JFrame anyFrame = new JFrame("MyTitle");
YourApplet yourApplet = new YourApplet();
anyFrame.getContentPane().add(yourApplet, BorderLayout.CENTER);
yourApplet.init();
anyFrame.setSize(new Dimension(800,600));
anyFrame.setVisible(true);
You will not necessarily have to write the applets default constructor.

Can't run CORBA Name Service Sample Application

Hi,
I am trying to run CORBA Name Service Sample Application in tuxedo 8.0 (WinNT
version). I get following error messages in ULOG file.
103757.NANDKV!ISH.429.448.0: ISNAT_CAT:1053: ERROR: Error polling network connections
103800.NANDKV!ISL.457.443.0: ISNAT_CAT:1386: ERROR: Cannot open handler process:
The operation completed successfully.
103901.NANDKV!ISL.457.443.0: ISNAT_CAT:1175: WARN: Disconnecting listener connection
to client, request timed out
Could anybody please explain about these errors?
Warm regards,
Nandu

Hi,
I am trying to run CORBA Name Service Sample Application in tuxedo 8.0 (WinNT
version). I get following error messages in ULOG file.
103757.NANDKV!ISH.429.448.0: ISNAT_CAT:1053: ERROR: Error polling network connections
103800.NANDKV!ISL.457.443.0: ISNAT_CAT:1386: ERROR: Cannot open handler process:
The operation completed successfully.
103901.NANDKV!ISL.457.443.0: ISNAT_CAT:1175: WARN: Disconnecting listener connection
to client, request timed out
Could anybody please explain about these errors?
Warm regards,
Nandu

Can't run a 10.7.4 VMWare VM on MBP with Retina

I have an old 13" Aluminum Macbook and a purchased copy of Lion that I created a VMWare OSX 10.7.4 VM with that I could use for work. I had it running fine on my 13" that runs 10.7.4. I just got a new MBP writh Retina display. It came with 10.7.4 pre-installed. I loaded VMWare, moved my VM over and tried to start it up. I got the login screen, but right after login, I get an error "The CPU has been disabled by the guest operating system. Power off or reset the virtual machine."
I submitted a VMWare ticket and they said this is caused by a mismatch between the OSX10.7.4 builds on the two machines, and that the one on my old macbook is unaware of the ivy bridge architecture on the new Macbook. They said this doesn't normally occur because Apple generally releases one build for all macbooks. As a point of reference, the build on my Retina is 11E2620, while on my 13" it is 11E53.
VMWare said that it should be cleared up once 10.7.5 is released. They had also heard from other clients that they had been successful in talking with Apple and getting a patch for the older Mac that would make it aware of ivy bridge. So I believe I would apply the patch to both the host and guest on the 13" (although I didn't get into that level of detail with the resource).
Anyway, I got Applecare with my retina so I submitted an Apple support ticket and talked to someone at Apple. They checked with their supervisor and basically said they didn't know anything about a patch and if there was one, I would have to get it from VMWare. They did agree that this should be clared up with 10.7.5 but again, pointed it back to VMWare.
So now I have Apple and VMWare pointing fingers at each other, I still have a non-working VM for my new machine (I can still run it on my old machine thankfully) and too much time has been spent on that VM to completely recreate it on the new Macbook. Anyway, not having the VM on my Retina really cuts down the amount I can use it. So if anyone has any more details on how to get this supposed patch, OR if anyone has any detail on when 10.7.5 is likely to be released, please let me know. Thanks,
-David

I can't answer the specific error message, but I can tell you a better way to do what you're asking.
on pathToScripts()
    tell application "Finder" to set parentFolder to (path to me) as text
    set scriptsFolder to parentFolder & "Contents:Resources:Scripts:"
    return scriptsFolder
end pathToScripts
There's no need to use the Finder here at all. 'path to me' is a standard command that doesn't require Finder input.
Secondly, if you're looking for a resource in the application's bundle then you should use 'path to resource' rather than 'path to me' + some hard-coded string.
As a result your first three lines of script could be reduced to:
set CloseBrowsersScriptPOSIXFile to path to resource "closeBrowsers.scpt" in directory "Scripts"
set theResult to run script file CloseBrowsersScriptPOSIXFile with parameters {"uninstaller"}

Can you run Photoshop CS3 and CS5 on the same system?

I did this before on another system where I had both CS2 and CS3 installed and I could run either version when I wanted. Back then I just never bothered to uninstall CS2.
Now on this system I'm tunning CS3 and I have some plug ins I use regularly that aren't compatible with CS5 and I don't want to lay out the cash again for them. So I'd like to be able to install CS5 and use it primarily but when I need to use the plug ins then just switch to CS3.
I've noticed many programs these days won't run on top of another version. So is there any reason I won't be able to run both?

Absolutely. All versions of Photoshop can coexist simultaneously, though you can only run one at a time.
It's usual not to install the old version until you're sure the new one is working great. If you have the space, never uninstall it. It's handy to have it around for answering questions, here for example.
-Noel

Can I Run a labview application in a hidden window (i.e. I don't want the front panel to pop up in this Labview created EXE)?

I have a executable labview 6.1 program with a front panel. The front panel pops up every time I run it. Can I force the program to run without popping up its front panel.
Thanks in Advance

If you're using MS Window, you can use lvwutil32.zip to hide the front panel. lvwutil32.zip can be downloaded from NI site.
Or you can move your front offscreen, so that user can't see it. And save your vi. When you run your vi again, it'll popup at the offscreen position. NI uses this trick to hide windows from LabVIEW users. You can also set front panel size to 0.
George Zou
http://gtoolbox.yeah.net

How can I run a script when an application quit??

Greetings all,
I'm trying to write a script, which can be triggered automatically (to do some stuff) at the time when a given application quit. I was playing around with this test script, taking "TextEdit" as an example - it just prints a message when TextEdit exits.
==========================================
+*set targetapp to "TextEdit"*+
+*tell application "System Events" to set rr to name of the processes*+
+*--if targetapp is not in rr then*+
+*-- tell application targetapp to activate*+
+*-- tell application "System Events" to set rr to name of the processes*+
+*--end if*+
+*set rr1 to rr*+
+*repeat until rr1 ≠ rr and targetapp is not in rr1*+
+*tell application "System Events" to set rr1 to name of the processes*+
+*do shell script "sleep 1"*+
+*end repeat*+
beep
+*display dialog (targetapp & " is not active anymore !") as string buttons {"OK"} default button 1 with icon 0*+
============================================
Unfortunately, it seems to work if I launch TextEdit using the script itself; it doesn't work with first +*"if - end if"*+ block commented out. Does anyone know how can I achieve this? Any help or suggestion greatly appreciated. Cheers!!

Hi santanu,
I'm sure you can use a variation of this application of mine to do what you want. It monitors all running processes and then reports when one closes.
--initialize previous_processes
global previous_processes
tell application "Finder"
set previous_processes to get the name of every process --use "whose visible is true" to remove the background ones
end tell
--monitoring script
on idle
tell application "Finder"
set current_processes to get the name of every process
end tell
set numberofprocesses to count of items in previous_processes
set counter to 1
repeat while counter is less than (numberofprocesses + 1)
if current_processes does not contain item counter of previous_processes then
display alert item counter of previous_processes & " quit!"
end if
set counter to counter + 1
end repeat
set previous_processes to current_processes
return 1 --runs every second...can be changed
end idle

How can I run a labview 7.2 vi in labview 8.2

We have several versions of labview running different test and control functions in our facility. There are labview 7.2 VIs in a production setting I wish to reproduce in the test lab. Can I convert them to run on 8.2 or do I have to recreate them in 8.2. I tried to open one in 8.2 and got multiple SubVI's that were not in my program library.. most dealing with AI manipulation.

And make sure you have backup copies of your 7.x code. Once you load and save in 8.2, it is a lot of work to get them back to 7.x.
Note I used 7.x because I am unaware of LabVIEW version 7.2 even existing. 7.1.1 was the last release prior to 8.0
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Can we Run 10g Forms & Reports without Application Server

Currently We are using form 5 and reports 3.5
we are willing to upgrade .
we are told that we can upgrade only to 10g developer suit
and for that Application Server is must
Our requirement is for LAN based application only
Do we have to go-in for application Server
DOes the 10g forms and 10g reports have Form server /report server which can help us to run application using Browser but without IAS
CK

Chaand,
for production environments you must run Forms and Reports through Oracle Application Server as there no longer is a client-server runtime. For development puposes tehre is a HTTP server in Oracle Developer Suite that is used to run both servers.
Frank

Can I run a LabVIEW 7.1 Application on a system with LabVIEW 6.1?

Similar Messages

Maybe you are looking for