Can I run a parallel router to apple TV to watch the Amazon product?

You can't watch Amazon content natively, if you have an IOS deivce you can use airplay.

Similar Messages

I can't run activity monitor application. It just processes with the multicolored disc spinning, but does not open.

I can't run activity monitor application. It just processes with the multicolored disc spinning, but does not open. It also won't close without using "Force Quit." When I access it in Force Quit it's listed as not responding. I am getting the messase that my start-up disc is full, but I can't assess the status without using the activity monitor app. Thanks for any assistance you can give. -F.J.

Welcome to Apple Support Communities
If your hard drive is full, you have to delete files. Open Finder, search in all your user's folders and delete files that you don't need, or move them to an external drive.
When the hard drive is full, OS X works slow and applications may freeze, so I wouldn't be surprised if this is the reason why Activity Monitor isn't working

HT1846 The 2012 Mac Mini's are listed on this article. Can I run windows 7 64-bit on it and/or the 32-bit?

The 2012 Mac Mini's are listed on this article. Can I run windows 7 64-bit on it and/or the 32-bit?

I would buy nothing less than Windows 7 64-bit Pro.
32-bit only addresses 3.5 GB RAM ... 2012 Macminis can hold 16 GB.
64-bit Home addresses 16 GB RAM.
64-bit Pro addresses 192 GB RAM and han an XP mode.
This is all about having a good version of Windows for future use. Yu can buy "Syem Builder" version of 64-bit Pro for $140.

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
I would try to find a copy of Final Cut Express perhaps.
Does this answer your question?

How can I run texts in flash media encoder 3.2 by the image

I have a question.
how can I run texts in flash media encoder 3.2 by the image
I do not get it done.
patrick

Hi MarcSaphiron,
Could you please send the samples?It will be much helpful to complete my
job within the deadline.
Thanks in advance.
Regards,
Sasharyuva

The Adobe License agreement - can I run one Mac version and one PC version on the same license?

can I run one Mac version and one PC version on the same license?

I'm specifically looking at Lightroom. Looks like I will be able to run both platforms... Now to figure out a goo file managment system if I'm editing photos on both systems.
I travel with a PC laptop (can't afford a MAC yet) so I will do some editing on the road for posts to facebook etc. and the heavy editing on the IMAC when we get back from holiday.
Thanks for your help.

Getting a message that I can't run this app on my PC and to contact the pulisher to get a version that I can run

getting a message that I can't run this app on my PC and to contact the pulisher to get a version that I can ru

Which Adobe product?
Which operating system?

I dont have internet connection, so can i still use offline adobe indesign, photoshop ? and whats the adobe product cos cs6 is not offered anymore...

i dont have internet connection, so can i still use offline adobe indesign, photoshop ? and whats the adobe product cos cs6 is not offered anymore...

CS6 products are still available thru Adobe:
Purchase CS6 products:
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

Time Capsule - Can it run as DHCP router, create a wireless network and plug into switch for wired network all at the same time?

I have a closet with Wired connections from all over the house terminating in it. I also have the internet modem and a switch in this closet. My old setup was a netgear in the closet creating a wireless network and also feeding the Ethernet ports all over the house. In my room, I had an Airport express (a month old) bridging the wifi to make the wifi network larger. The Express was hard wired from the wall and my mac mini was using it's wifi (printer was plugged into other ethernet port). Everything was working great.
Fast forward to last week. My Netgear died. So, I bought a time capsule. My plan was to move the Express to the closet and have it create the wifi network and also then run cat 5 cord from express to the switch to feed all the wired wall plugs. Reset it and set it up to create the wifi network as well as DCHP NAT. Wireless was running great on it. Then I plugged in the Cat 5 in the second Ethernet Port to the switch. Wifi stopped working and none of the computers would connect using wired connections either. They would see a 'network' but nothing would work. I would unplug the Cat 5 feeding the swtich and the wireless would start working again. Plug the Cat 5 back in and wireless would stop.
So I thought I would try the Time Capsule in the closet and see if I could get it to work. Pretty much the same thing, except at this point I figured out if I went in and told it NOT to create a wifi network the wired portion worked fine and all the wired computers in the house worked fine. Of course, then I didn't have Wifi.
I'm not clueless when it comes to networking, but I can NOT figure this out! Can either the Time Capsule or Express Create the wifi network AND also feed the data to the switch for all the wired computers?
To simplify this is what I want my end result to be. I prefer the Time Capsule to be the wireless connection extender, but if I have to have the Express do it, I'm fine with that.
1. Express in the closet creating the wifi network as well as feeding the data to the wired connections via my switch.
2. have the Time capsule in my room at the opposite end of the house plugged into the hard wired connection to extend the wrieless network as well as have wired connections such as my printer and my Mac Mini.
If I can get #1 to work, I don't think I'll have any problems with #2. Help!

I have an equally complex setup with a managed switch actually but I have never seen the TC have this kind of issue.
What I do notice is you have changed the TC from defaults.. you are using a non-default IP range.
I have run across issues like this where people move things from default.
I would like you to start over.. factory reset the TC. That will set it back to default router mode.
Do the min setup on the TC..
1. Change all names from what you were using. That includes the TC name and wireless name/s
Make them short, no spaces and pure alphanumeric because that is the correct way to network. Apple default names with spaces and apostrophes are fundamentally bad.
2. With just the TC plugged into the switch.. and a single computer connected by ethernet. Power cycle the whole network.. this allows the switch to clear all the old MAC address.
3. Test on the computer just ethernet. Turn the wireless off.
The computer must use dhcp and must get an ip from the TC.
It has to get the correct Router.. ie Gateway.. I wish apple could stick with proper network terminology.
And it must get same address or valid DNS server address/es.
If it fails.. please plug ethernet directly to the TC.. bypassing the switch.
You should get the standard IP addressing and internet connection.
If not please post the screenshot from the Mac of the network preferences showing the ethernet setup.
I need to see what address it does get. I need you to make sure the ethernet is the TOP of the list. So rearrange the order of network connection. With the airport off it should just go to the top of the list.
If it appears to be working .. but a browser cannot connect, open a terminal and ping an internet address.
Ping the actual gateway address the ISP gives you and ping the ISP dns address.

How can I stream the audio only to my Apple TV while watching the video on my iPad?

Hi everybody!
My question might sound a little confusing to some of you, but anyway: When I watch a video on my iPad (youtube app, facebook, etc.) I would like to watch the video on my iPad and stream the audio to my atv, which is connected to my hifi. Currently, every time I hit the airplay button both video AND audio will be streamed.
Many people complain about only streaming audio, but that's precisely what I am looking for! I don't want to turn on my TV for every silly 0:30 min youtube video. I would love to find something like this:
Cheers for any help!

you can't rely on airplay mirror some apps support the old in app airtune audio only option if the video app in question does you can do it from the apps settings somehow
if not then you need a airport express which does pretty much what airplay mirror on the Apple TV does but it's a audio only

When I use a projector via a VGA adapter I can not run my Bluetooth speaker or other Bluetooth devices at the same time. Can anyone help me with this?

I try to find help. I can not run a projector and a Bluetooth device at the same time. Even though my Bluetooth speaker is recognized, and I have changed the settings to this speaker, it wont play any sound. I have got also problems using other Bluetooth devices when I use the projector via a VGA adapter.

I try to find help. I can not run a projector and a Bluetooth device at the same time. Even though my Bluetooth speaker is recognized, and I have changed the settings to this speaker, it wont play any sound. I have got also problems using other Bluetooth devices when I use the projector via a VGA adapter.

Play a movie in an ipad2 from a shared computer then send the movie to my apple tv to watch the rest of the movie.

is it possible to play a movie on an ipad2 from a shared itunes (on a windows computer) then when i want to send the movie to my apple tv? Seems like i should be able to do this, but when i choose apple tv on the ipad2 only the sound gets sent to the apple tv, i don't get any video. I do however get video for everything else (i.e. if i watch youtube, etc).

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

Can you run a wired router from the base station?

I have a Airport Extreme base station, I bought it about 6 months ago so it's not too old. My question is can you plug a wired switch, hub or router into it? I was told no at the apple store but I don't see why you could not. All I want to do is run a 8 port switch from the base station so I can connect my other wired comps to the net. Thanks!

My question is can you plug a wired switch, hub or router into it?
Yes, just connect it to the LAN port on the AirPort Extreme base station (AEBS).
I was told no at the apple store...
They gave you incorrect information.

Can you run Logic Pro 8 and Logic Pro X on the same machine?

Hello all!
Congratulations to us on the release of the new Logic Pro!
I am still running Logic Pro 8 (and was waiting for X to come out since I knew it wasn't too far off) but am concerned over the loss of 32-bit plug-ins with Logic Pro X (the wrapping of my old VST plug-ins alone hurts!). I've heard that installing Logic Pro X doesn't in any way gimp Logic Pro 9's usage, but can someone confirm whether or not Logic Pro X and Logic Pro 8 can operate in harmony on the same Mac?
As a bonus, is there any reason to believe that Apple would disable earlier versions of Logic Pro (such as version 8) from running on Mavericks?
I am planning my Logic Pro and Mac OS migrations! Thanks!!

Try here:
https://discussions.apple.com/community/professional_applications/logic_pro
This forum is FCP X.
Al

Can I have 2 iPhones with different Apple IDs link to the same Photo Stream?

My husband and I use the same computer and Aperture program. I set my iPhone up with the Photo Stream from Aperture with no problem but when he set his up, it didn't get the feed of pictures. We have different apple ID's on our phones? Can this be done?

just to add another question to this, can i subscribe to a photo stream, like my mate's?
i'm guessing no, and that htis wil be a future feature.
I've not found any referneces to this anywhere
much appreciated

Can I run a parallel router to apple TV to watch the Amazon product?

Similar Messages

Maybe you are looking for