Can I run an HDMI monitor from the Firewire port of my MBP?

This may be a strange one
I am running a late 2011 17" MBP running Mavericks (latest version as of July 2014).
Currently I have a 4TB external thunderbolt drive attached. There is no thru port.
My challenge is, I want to connect an external HDMI monitor, but this MBP only has the one Thunderbolt port, being used by the external drive.
My hope is, that somehow, I might be able to MacGyver something using the Firewire port since I cannot afford another monitor with a TB through at the moment....Technically the cabling would be possible, albeit a bit freakish.
Something like:
Firewire cable out from MBP, plugged into a FW to Thunderbolt converter, thunderbolt converter tip plugged into a MiniDisplayPort to HDMI converter box (like the Monoprice MMP-MDP2H01), then from there to the HDMI monitor.
Would the MBP detect the monitor and route the video signal through the FW port accordingly?
Looking forward to some expert advice and any zany workaround suggestions you all might have!
Respect.

The MDP to HDMI will work fine.
Captfred

Similar Messages

Thunderbolt conundrum: Can more than one device operate from the same port?

Hello! I am using a macbook pro with one thunderbolt output. The thunderbolt is being used on a Universal Audio Apolo Quad analog/digital audio recording device. I would also like to add a second video screen to my operation as well. Can more than two devices be ran (via a splitter of some sort) from the Thunderbold port? If not, are there any workarounds?
Thanks!
Clint

Thanks for the reply. Back to the drawing board...

Can I run a 2560x1440 monitor with the envy dv7t 7300

Can I run a 27" WQHD 2560x1440 ips monitor at full res with my Envy DV7t 7300. I7 quad 2.6 GHz, GT650m 2gb ?
Thanks, Cesar

Hi linacjsdad,
Thank you for your query, I will do my best to help.
If you connect the monitor with a HDMI connection it will support the highest resolution.
Your HD 7670M DDR# graphic card will support resolutions of 2560x1600 which is higher then the monitor, therefore you should not have an issue. Specifications of the AMD Radeon HD 7670M DDR3 GPU
HP ENVY dv7 Notebook PC Maintenance and Service Guide Please note chapter 2 pages 3 and 4.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Can you run a wired router from the base station?

I have a Airport Extreme base station, I bought it about 6 months ago so it's not too old. My question is can you plug a wired switch, hub or router into it? I was told no at the apple store but I don't see why you could not. All I want to do is run a 8 port switch from the base station so I can connect my other wired comps to the net. Thanks!

My question is can you plug a wired switch, hub or router into it?
Yes, just connect it to the LAN port on the AirPort Extreme base station (AEBS).
I was told no at the apple store...
They gave you incorrect information.

What cable do I need to connect a 2nd Monitor from the thunderbolt port?

Hi I have got one of the brand new iMac's with thunderbolt ports - what cable do I need to connect my Imac to a 2nd display either VGA or DVI - also is there a budget version about as well as I am sure its going to cost a lot from the apple store

Thanks I understand that I need another cable and have that from when I connected my old PC to the 2nd monitor.
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY - is this the one I need if going to DVI
I just dont want to waste more money on a cable that says its for an imac to 2nd screen and find it doesnt fit
For info my iMAC is the latest version (27" with the 2 thunderbolt connections and 1 firewire)
Thanks

Can I run two different ipods from the same laptop?

Hi, I am very new to all this. Is it possible to have two different ipods running from itunes on the same computer. If it is how do I separate them so when I connect and ipod it doesn't sync both lots of music.
Please Help me
Thanks
Hoolie

I'm currently syncing three iPods to the same library. iTunes will recognize each iPod as a unique device. My preferred method of managing my iPods is "Sync Selected Playlists". This allows me the convinience of syncing (and all my ratings, playcounts and last played sync) while still being able to control what goes on each iPod. You can set your preferences for each iPod. You could managage one manually and sync the other. Whatever works best for you.

Can I run a shell script from the services menu?, part II

Remember this?
It is now possible.

Doesn't look like there is a direct way to do it.
The services are all Bundles, which is easy
enough to fake -- just copy one from /Library/Services
to ~/Services and modify the plist. Put your shell
script in Contents/MacOS/ and identify it in the
plist under CFBundleExecutable and hope for the
best
Where it gets sticky is CFBundlePackageType (APPL
for Application, FMWK for FrameWork, BNDL for
'loadable bundle', whatever that is] and NSServices.
CFBundlePackageType should pose no problem if Services
use the OS loader and handles file magic [and '#!' of
course].
NSServices specifies a named port that the app
listens on, the data type it receives, and so forth.
This looks a bit harder to fake. I'd bet Applescript
has the functionality, and there may be some
command-line hooks to backend that, or it may be
possible to netcat your way through it.
But it doesn't look trivial
Property List Key Reference
Anyways, tried it with a quick script that echoes to a
file, and haven't figured out how to refresh the
Services menu to get it to appear. Probably have
to NetInfo it or something ridiculous; doesn't appear
to watch the FS.
[ Edited by Apple Discussions Moderator; href URL ]

Can I run a shell script from the Services menu?

This would be kind of cool.
Is there a simple way to do this?

Doesn't look like there is a direct way to do it.
The services are all Bundles, which is easy
enough to fake -- just copy one from /Library/Services
to ~/Services and modify the plist. Put your shell
script in Contents/MacOS/ and identify it in the
plist under CFBundleExecutable and hope for the
best
Where it gets sticky is CFBundlePackageType (APPL
for Application, FMWK for FrameWork, BNDL for
'loadable bundle', whatever that is] and NSServices.
CFBundlePackageType should pose no problem if Services
use the OS loader and handles file magic [and '#!' of
course].
NSServices specifies a named port that the app
listens on, the data type it receives, and so forth.
This looks a bit harder to fake. I'd bet Applescript
has the functionality, and there may be some
command-line hooks to backend that, or it may be
possible to netcat your way through it.
But it doesn't look trivial
Property List Key Reference
Anyways, tried it with a quick script that echoes to a
file, and haven't figured out how to refresh the
Services menu to get it to appear. Probably have
to NetInfo it or something ridiculous; doesn't appear
to watch the FS.
[ Edited by Apple Discussions Moderator; href URL ]

HT4437 can i run my apple TV from an iPad2 with a PC as the iTunes server ... would like to do away with Apple TV remote ... thank you

can i run my apple TV from an iPad2 with a PC as the iTunes server ... would like to do away with Apple TV remote ... thank you
JJ

As I was saying earlier that is not possible because the Apple TV has no accessible storage and streaming from your iMac is done via home sharing on your local network.
iTunes purchases can be accessed via the cloud on Apple TV. If you have iTunes Match you can access your full music libary from the cloud.
Using the iPad to watch your films would require syncing them and then connecting the iPad to a TV.

Can I run a cat5 cable to a 4 port hub from a cisco router then connect one of the hub's output ports to an airport express to 'extend' my wireless range?

Can I run a cat5 cable to a 4 port hub from a cisco router then connect one of the hub's output ports to an airport express to 'extend' my wireless range?
Flow would be
Cable modem---->cisco e2000 wifi router (This is broadcasting wifi but not strong enough)---->4 port hub ---->airport express (to extend the wifi in another part of house)
thanks!

Yes, you can do this as you stated. In essence you will want to configure both routers for roaming network. Please check out the following Apple Support article that describes this type of network. Although this article uses two or more AirPorts, it can be done with just about any manufacturer's router.

Can I still buy iMovie '11 from the App Store? (I have an older iMac with Snow Leopard which cannot run the current version, iMovie 10).).

I am running Snow Leopard, and I bought a new camera (Canon Vixia HF R300). I am so far unable to download my movies into iMovie, and from what I have been able to ascertain, I need to upgrage to iMovie '11 to support the camera.
I have read that iMovie '11 was available at the Mac App Store, but now I see that the App Store has the new version, iMovie 10.0, which my Snow Leopard mac cannot support. Can I still get iMovie '11 from the App Store?

Apple has not made older versions of apps available in the MAS, only the most recent version. Apple constantly reminds folks that they alone are responcible for backing up their content purchases for the very reason that content may not always be available from the MAS in the future.
To answer your question, no, a license for a particular version of an Apple app does not entitle you to older versions of the app.

I created an album and have been showing it presentation style, ken burns effects etc. Now every time I try to re-run it it starts from the end, last picture first! Can't seem to be able to reverse it. Any clue anyone?

I created an album and have been showing it presentation style, ken burns effects etc. Now every time I try to re-run it it starts from the end, last picture first! Can't seem to be able to reverse it. Any clue anyone?

First try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion, Mt. Lion or Mavericks delete the contents the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto, reset iPhoto's preferences and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
Next, if necessary, continue with the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

If I put my 7300 in slot4 at 8x, and a 8800GT at slot1, 16x, could I boot 10.4.11 on my mac pro 1,1 if I unplug the monitor from the 8800GT?

If I put my 7300 in slot4 at 8x, and a 8800GT at slot1, 16x, could I boot 10.4.11 on my mac pro 1,1 if I unplug the monitor from the 8800GT?
I have different os's installed on my different hard drives. I'm using 10.6.8 now, but I go back to 10.5.8 and 10.4.11 on accasion. Can I run 10.4.11 with the 7300 in the 8x lane? As long as I unplug the 8800GT but leave it installed in the 16x slot1? And attach a monitor to the 7300?
What about using the 7300 to run extra monitors or a monitor while running 10.5.8 and 10.6.8? Is that a problem? I have 10GB Ram and the 1,1 original machine.

I know the 8800 requires 10.5.2, but if it is installed (at 16x) but no monitor is connected, will it allow the 7300 to control one or two monitors in 10.4.11? When the 7300 is in the 8x lane? And will it boot?
I lost part of your train of thought. Are you telling me to get just an ATI 5770 to continue using this machine into the future?
I thought the original mac pro 1,1 needed cards of the same manufacturer. If I use the 5770, that eliminates the ability to boot 10.4.11, correct?
What if I keep the 7300 handy in a box and put it in when I have to use 10.4.11? ( select the start up disc, shut down, change the card, restart) Does the 5770 require a power cable to another board that I might damage with repeated changes?

How can I run 2 Dreamweaver windows at the same time?

How can I run 2 Dreamweaver windows at the same time on my
PC?
basically I have 2 monitors and I want to edit CSS on one
monitor and have the html page open on the other so I can quickly
look from one to another with in a split second instead of taking
that extra time to switch back and forth using the tabs at the top,
I know I should probably invest into a mac so i can work out side
of the Dreamweaver application window and I will in the future but
is there any way i can do this on my windows XP pro PC?
Thank you
Maurice

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

Error while running a eBS webservice from the SoapUI Tool

Hello All,
I am trying to run PurchaseOrder Service webservice from the soap ui tool, In this service there are 6 methods are available and i am currently running the QueryPurchaseOrder method:
Following is the soap message I am running:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:pox="http://xmlns.oracle.com/java/oracle/apps/po/services/poxpoepo/POXPOEPOServices_DocStyle/" xmlns:orac="http://oracle.apps.fnd.soa.forms.services.rt.formsSchema/">
<soapenv:Header>
<pox:SOAHeader>

<pox:Responsibility></pox:Responsibility>

<pox:RespApplication></pox:RespApplication>

<pox:SecurityGroup></pox:SecurityGroup>

<pox:NLSLanguage></pox:NLSLanguage>

<pox:Org_Id>204</pox:Org_Id>
</pox:SOAHeader>
</soapenv:Header>
<soapenv:Body>
<pox:queryPurchaseOrder_Request>
<orac:OutsideProcessing>

<orac:Job></orac:Job>

<orac:Line></orac:Line>

<orac:OSPUnitType></orac:OSPUnitType>

<orac:OperationSequence></orac:OperationSequence>

<orac:ResourceSequence></orac:ResourceSequence>

<orac:ResourceCode></orac:ResourceCode>
</orac:OutsideProcessing>
<orac:PoHeaders>

<orac:PoLines>
<orac:LineNum>1</orac:LineNum>
<orac:LineType>Goods</orac:LineType>

<orac:Item></orac:Item>

<orac:ItemRevision></orac:ItemRevision>

<orac:Job></orac:Job>
<orac:ItemCategory>MISC.MISC</orac:ItemCategory>
<orac:ItemDescription>test</orac:ItemDescription>
<orac:UnitOfMeasure>EA</orac:UnitOfMeasure>

<orac:LineOrderQuantity></orac:LineOrderQuantity>

<orac:Quantity></orac:Quantity>

<orac:LineUnitPrice></orac:LineUnitPrice>

<orac:PromisedDate></orac:PromisedDate>

<orac:NeedByDate></orac:NeedByDate>

<orac:VendorProductNum></orac:VendorProductNum>

<orac:Amount></orac:Amount>

<orac:ChargeAccount></orac:ChargeAccount>

<orac:Reserved></orac:Reserved>

<orac:OPMLineSecondaryUOM></orac:OPMLineSecondaryUOM>

<orac:OPMLineSecondaryQuantity></orac:OPMLineSecondaryQuantity>

<orac:SecondaryQuantity></orac:SecondaryQuantity>

<orac:PreferredLineGrade></orac:PreferredLineGrade>

<orac:ItemListPrice></orac:ItemListPrice>

<orac:ItemMarketPrice></orac:ItemMarketPrice>

<orac:PriceType></orac:PriceType>

<orac:AllowPriceOverride></orac:AllowPriceOverride>

<orac:PriceLimit></orac:PriceLimit>

<orac:Negotiated></orac:Negotiated>

<orac:ContractNum></orac:ContractNum>

<orac:GlobalContract></orac:GlobalContract>

<orac:ContractOwningOrg></orac:ContractOwningOrg>

<orac:SourceDocumentType></orac:SourceDocumentType>

<orac:FromDocumentNum></orac:FromDocumentNum>

<orac:FromDocumentLineNum></orac:FromDocumentLineNum>

<orac:GlobalBlanket></orac:GlobalBlanket>

<orac:SourceDocumentOwningOrg></orac:SourceDocumentOwningOrg>

<orac:SupplierQuotation></orac:SupplierQuotation>

<orac:ProjectsContractNum></orac:ProjectsContractNum>

<orac:ProjectsContractRevNum></orac:ProjectsContractRevNum>

<orac:NoteToSupplier></orac:NoteToSupplier>

<orac:UNNum></orac:UNNum>

<orac:UNNumDescription></orac:UNNumDescription>

<orac:HazardClass></orac:HazardClass>

<orac:CapitalExpense></orac:CapitalExpense>

<orac:TransactionNature></orac:TransactionNature>

<orac:ContractorFirstName></orac:ContractorFirstName>

<orac:ContractorLastName></orac:ContractorLastName>

<orac:ContractorStartDate></orac:ContractorStartDate>

<orac:ContractorEndDate></orac:ContractorEndDate>

<orac:MinimumLineReleaseAmount></orac:MinimumLineReleaseAmount>

<orac:LineQuantityAgreed></orac:LineQuantityAgreed>

<orac:LineAmountAgreed></orac:LineAmountAgreed>

<orac:LlineQuantityReleased></orac:LlineQuantityReleased>

<orac:LineAmountReleased></orac:LineAmountReleased>

<orac:LineExpirationDate></orac:LineExpirationDate>

<orac:CumulativePricing></orac:CumulativePricing>

<orac:PoShipments>
<orac:ShipmentNum>1</orac:ShipmentNum>
<orac:ShiptoOrganization>M1</orac:ShiptoOrganization>
<orac:ShipToLocation>M1- Seattle Mfg</orac:ShipToLocation>

<orac:UnitOfMeasure></orac:UnitOfMeasure>
<orac:ShipmentQuantity>1</orac:ShipmentQuantity>

<orac:PromisedDate></orac:PromisedDate>

<orac:NeedByDate></orac:NeedByDate>

<orac:OriginalPromisedDate></orac:OriginalPromisedDate>

<orac:CountryofOrigin></orac:CountryofOrigin>

<orac:ChargeAccount></orac:ChargeAccount>

<orac:ShipmentAmount></orac:ShipmentAmount>

<orac:EncumberedFlag></orac:EncumberedFlag>

<orac:OPMShipmentSecondaryUOM></orac:OPMShipmentSecondaryUOM>

<orac:OPMShipmentSecondaryQuantity></orac:OPMShipmentSecondaryQuantity>

<orac:PreferredShipmentGrade></orac:PreferredShipmentGrade>

<orac:ReceiptCloseTolerance></orac:ReceiptCloseTolerance>

<orac:InvoiceCloseTolerance></orac:InvoiceCloseTolerance>
<orac:MatchApprovalLevel>3WAY</orac:MatchApprovalLevel>
<orac:InvoiceMatchOption>P</orac:InvoiceMatchOption>

<orac:AccrueatReceipt></orac:AccrueatReceipt>

<orac:Firm></orac:Firm>

<orac:Item></orac:Item>

<orac:Category></orac:Category>

<orac:Description></orac:Description>

<orac:VendorProductNum></orac:VendorProductNum>

<orac:ShipmentStatus></orac:ShipmentStatus>

<orac:QuantityReceived></orac:QuantityReceived>

<orac:QuantityCancelled></orac:QuantityCancelled>

<orac:QuanittyBilled></orac:QuanittyBilled>

<orac:AmountReceived></orac:AmountReceived>

<orac:AmountCancelled></orac:AmountCancelled>

<orac:AmountBilled></orac:AmountBilled>

<orac:OPMSecondaryQuantityReceived></orac:OPMSecondaryQuantityReceived>

<orac:OPMSecondaryCancelled></orac:OPMSecondaryCancelled>
<orac:BreakPrice></orac:BreakPrice>

<orac:PriceDiscount></orac:PriceDiscount>

<orac:PriceBreakStartDate></orac:PriceBreakStartDate>

<orac:PriceBreakEndDate></orac:PriceBreakEndDate>

<orac:EarlyReceiptDays></orac:EarlyReceiptDays>

<orac:LateReceiptDays></orac:LateReceiptDays>

<orac:ReceiptDaysAction></orac:ReceiptDaysAction>

<orac:LastAcceptDate></orac:LastAcceptDate>

<orac:ReceiptTolerance></orac:ReceiptTolerance>

<orac:ReceiptToleranceAction></orac:ReceiptToleranceAction>

<orac:AllowSubstituteReceipts></orac:AllowSubstituteReceipts>

<orac:ReceiptRouting></orac:ReceiptRouting>

<orac:EnforceShipTo></orac:EnforceShipTo>

<orac:NoteforReceiver></orac:NoteforReceiver>

<orac:VMIEnabled></orac:VMIEnabled>

<orac:ConsignedShipment></orac:ConsignedShipment>

<orac:PoDistributions>
<orac:DistributionNum>1</orac:DistributionNum>
<orac:DestinationType>Expense</orac:DestinationType>

<orac:Requester></orac:Requester>

<orac:DeliverToLocation></orac:DeliverToLocation>

<orac:DestinationSubinventory></orac:DestinationSubinventory>
<orac:DistributionQuantity>?</orac:DistributionQuantity>

<orac:DistributionAmount></orac:DistributionAmount>

<orac:POChargeAccount></orac:POChargeAccount>

<orac:DestinationChargeAccount></orac:DestinationChargeAccount>

<orac:RecoveryRate></orac:RecoveryRate>

<orac:GLDate></orac:GLDate>

<orac:EncumberedFlag></orac:EncumberedFlag>

<orac:RequestingOrganization></orac:RequestingOrganization>

<orac:RequisitionNum></orac:RequisitionNum>

<orac:RequisitionLineNum></orac:RequisitionLineNum>

<orac:OnlineRequisition></orac:OnlineRequisition>

<orac:RateDate></orac:RateDate>

<orac:Rate></orac:Rate>

<orac:POAccrualAccount></orac:POAccrualAccount>

<orac:POBudgetAccount></orac:POBudgetAccount>

<orac:POVarianceAccount></orac:POVarianceAccount>

<orac:ChargeAccountDescription></orac:ChargeAccountDescription>

<orac:BudgetAccountDescription></orac:BudgetAccountDescription>

<orac:AccrualAccountDescription></orac:AccrualAccountDescription>

<orac:VarianceAccountDescription></orac:VarianceAccountDescription>

<orac:Project></orac:Project>

<orac:Task></orac:Task>

<orac:Award></orac:Award>

<orac:ExpenditureType></orac:ExpenditureType>

<orac:ExpenditureOrganization></orac:ExpenditureOrganization>

<orac:ExpenditureDate></orac:ExpenditureDate>

<orac:ProjectsContractLineNum></orac:ProjectsContractLineNum>

<orac:ProjectsDeliverableNum></orac:ProjectsDeliverableNum>

<orac:EndItemUnitNum></orac:EndItemUnitNum>

<orac:DestinationChargeAccountDescription></orac:DestinationChargeAccountDescription>

<orac:DestinationVarianceAccountDescription></orac:DestinationVarianceAccountDescription>

<orac:DestinationVarianceAccount></orac:DestinationVarianceAccount>
</orac:PoDistributions>
</orac:PoShipments>
</orac:PoLines>

<orac:PoBpaDistributions>

<orac:Encumber></orac:Encumber>

<orac:BudgetAccount></orac:BudgetAccount>

<orac:GLDate></orac:GLDate>

<orac:AmountToEncumber></orac:AmountToEncumber>
</orac:PoBpaDistributions>
<orac:OperatingUnit>Vision Operations</orac:OperatingUnit>
<orac:PONum>6194</orac:PONum>

<orac:RevisionNum></orac:RevisionNum>
<orac:DocumentType>Standard Purchase Order</orac:DocumentType>

<orac:CreationDate></orac:CreationDate>

<orac:Supplier></orac:Supplier>

<orac:SupplierSite></orac:SupplierSite>

<orac:SupplierContact></orac:SupplierContact>

<orac:ShipToLocation></orac:ShipToLocation>

<orac:BillToLocation></orac:BillToLocation>

<orac:Currency></orac:Currency>
<orac:Buyer>31994</orac:Buyer>

<orac:Status></orac:Status>

<orac:POTotal></orac:POTotal>

<orac:AmounttAgreed></orac:AmounttAgreed>

<orac:HeaderDescription></orac:HeaderDescription>

<orac:PCard></orac:PCard>

<orac:AmountReleased></orac:AmountReleased>

<orac:GlobalAgreementFlag></orac:GlobalAgreementFlag>

<orac:PaymentTerms></orac:PaymentTerms>

<orac:FreightTerms></orac:FreightTerms>

<orac:Carrier></orac:Carrier>

<orac:FreeOnBoard></orac:FreeOnBoard>

<orac:PayOn></orac:PayOn>

<orac:TransportationArranged></orac:TransportationArranged>

<orac:ConfirmingOrder></orac:ConfirmingOrder>

<orac:Firm></orac:Firm>

<orac:AcceptanceRequired></orac:AcceptanceRequired>

<orac:AcceptanceDueDate></orac:AcceptanceDueDate>

<orac:SupplyAgreement></orac:SupplyAgreement>

<orac:SupplierNote></orac:SupplierNote>

<orac:ReceiverNote></orac:ReceiverNote>

<orac:EffectiveStartDate></orac:EffectiveStartDate>

<orac:EffectiveEndDate></orac:EffectiveEndDate>

<orac:AmountLimit></orac:AmountLimit>

<orac:MinimumHeaderReleaseAmount></orac:MinimumHeaderReleaseAmount>

<orac:PriceUpdateTolerance></orac:PriceUpdateTolerance>
<orac:PoHeaderId>91781</orac:PoHeaderId>
</orac:PoHeaders>
</pox:queryPurchaseOrder_Request>
</soapenv:Body>
</soapenv:Envelope>
Now when i run this, I get the below error in the SOAP UI Tool:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<Error>[Ljava.lang.StackTraceElement;@118da51</Error>
</env:Body>
</env:Envelope>
Can u please suggest any solution to resolve this error.
Thanks & Regards,
Aboothahir M

Hello All,
I checked in the log.xml file in the apps server and got the below error:
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2012-01-18T16:50:24.110+05:30</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>amsgurbluapp009.in.ibm.com</HOST_ID>
<HOST_NWADDR>9.126.177.20</HOST_NWADDR>
<MODULE_ID>security</MODULE_ID>
<THREAD_ID>12</THREAD_ID>
<USER_ID>orar12</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1326885623:9.126.177.20:24571:0:38</UNIQUE_ID><SEQ>5</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Error when intializing assertion issuer context </MSG_TEXT>
<SUPPL_DETAIL><![CDATA[java.lang.IllegalArgumentException: Invalid assertion
     at oracle.security.jazn.callback.SAMLTokenCallbackInternal.setAssertion(SAMLTokenCallbackInternal.java:70)
     at oracle.security.jazn.callback.WSSCallbackHandler.handle(WSSCallbackHandler.java:107)
     at javax.security.auth.login.LoginContext$SecureCallbackHandler$1.run(LoginContext.java:955)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.login.LoginContext$SecureCallbackHandler.handle(LoginContext.java:951)
     at oracle.security.jazn.login.module.saml.SAMLLoginModule.initializeAssertionIssuerContext(SAMLLoginModule.java:278)
     at oracle.security.jazn.login.module.saml.SAMLLoginModule.initializeProperties(SAMLLoginModule.java:233)
     at oracle.security.jazn.login.module.saml.SAMLLoginModule.initialize(SAMLLoginModule.java:91)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.security.auth.login.LoginContext.invoke(LoginContext.java:756)
     at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
     at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
     at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
     at oracle.security.wss.jaas.JAASAuthManager.invokeLogin(JAASAuthManager.java:109)
     at oracle.security.wss.jaas.JAASAuthManager.authenticate(JAASAuthManager.java:174)
     at oracle.security.wss.UsernameTokenProcessor.getSubject(UsernameTokenProcessor.java:143)
     at oracle.security.wss.WSSecurity.process(WSSecurity.java:1107)
     at oracle.security.wss.interceptors.AbstractSecurityInterceptor.handleInbound(AbstractSecurityInterceptor.java:131)
     at oracle.security.wss.interceptors.ServiceInterceptor.handleRequest(ServiceInterceptor.java:60)
     at oracle.j2ee.ws.common.mgmt.runtime.InterceptorChainImpl.handleRequest(InterceptorChainImpl.java:124)
     at oracle.j2ee.ws.common.mgmt.runtime.AbstractInterceptorPipeline.handleRequest(AbstractInterceptorPipeline.java:87)
     at oracle.j2ee.ws.server.provider.management.AbstractProviderInterceptorPipeline.executeRequestInterceptorChain(AbstractProviderInterceptorPipeline.java:452)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.executeInterceptorRequestChain(ProviderProcessor.java:750)
     at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:112)
     at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
     at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:194)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2012-01-18T16:50:25.524+05:30</TSTZ_ORIGINATING>
<COMPONENT_ID>webservices</COMPONENT_ID>
<MSG_ID>OWS-04005</MSG_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>amsgurbluapp009.in.ibm.com</HOST_ID>
<HOST_NWADDR>9.126.177.20</HOST_NWADDR>
<MODULE_ID>service</MODULE_ID>
<THREAD_ID>14</THREAD_ID>
<USER_ID>orar12</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1326885621:9.126.177.20:24505:0:46</UNIQUE_ID><SEQ>6</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>An error occurred for port: SOAProvider: oracle.j2ee.ws.common.soap.fault.SOAP11FaultException: The security token could not be authenticated or authorized.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2012-01-18T16:50:25.527+05:30</TSTZ_ORIGINATING>
<COMPONENT_ID>webservices</COMPONENT_ID>
<MSG_ID>OWS-04005</MSG_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>amsgurbluapp009.in.ibm.com</HOST_ID>
<HOST_NWADDR>9.126.177.20</HOST_NWADDR>
<MODULE_ID>service</MODULE_ID>
<THREAD_ID>12</THREAD_ID>
<USER_ID>orar12</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1326885623:9.126.177.20:24571:0:38</UNIQUE_ID><SEQ>6</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>An error occurred for port: SOAProvider: oracle.j2ee.ws.common.soap.fault.SOAP11FaultException: The security token could not be authenticated or authorized.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2012-01-18T16:56:08.311+05:30</TSTZ_ORIGINATING>
<COMPONENT_ID>webservices</COMPONENT_ID>
<MSG_ID>OWS-04052</MSG_ID>
<MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>amsgurbluapp009.in.ibm.com</HOST_ID>
<HOST_NWADDR>9.126.177.20</HOST_NWADDR>
<MODULE_ID>service</MODULE_ID>
<THREAD_ID>13</THREAD_ID>
<USER_ID>orar12</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1326885960:9.126.177.20:23538:0:57</UNIQUE_ID><SEQ>242</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Unable to determine operation id from SOAP Message.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
By
Aboo

Can I run an HDMI monitor from the Firewire port of my MBP?

Similar Messages

Maybe you are looking for