Can i run Battlefield 3 on My 27" IMac through parallels smoothly ?

Ive got an brand new 27" IMac with quad core i5 and nevidea geforce 660 512MB. I have already got Paralles 8 and run other games on it like Arma2 and DayZ and i want to buy battlefield 3 for my mac. I've looked on forums around the net and none have told me what i need to know which is can i run Battlefield 3 on my IMac nice and smoothly through paralles and if not what i need to do so i can play it?

Welcome to the forums Leura!
Have you checked the game developers's website for hardware specs needed to run this game?
Chance are, if you are trying to play Windows games through translation software, things are going to run quite a bit slower in a virtual environment.
What CPU speed is your i5 chip? Is it the low end i5?
There are two other factors running Windows games like these on a Mac.
You are going to need more RAM than the base 4 or 8 GBs of RAM. You may have to consider upgrading to 12 or 16 GBs of RAM.
Graphics processing power with these games is usually a lot. Most of the Windows only games are very high resolution and GPU intense games usually requiring, as I have found, at least, 1 GB VRAM graphics engine.
And Mac video cards are not optimized nor have all of the GPU feature set needed that PC graphics engine usually do.

Similar Messages

Can I run time capsule on both my imac and pc laptops?

Can I run time capsule on both my Imac and pc laptops?

Depends on what you mean by "run". Both the Mac and PC could connect using either wireless or Ethernet.
The iMac could backup automatically using Time Machine over wireless or Ethernet.
Genie TimeLine Pro might be able to backup the PC automatically, but you would need to check on this with the Genie folks to confirm.

How can I run 2 Mac Systems on an iMac using VMWare Fusion

Hello,
- I'm using an iMac, system 10.10.2.
- I bought VMWare Fusion 7.1.1.
I would like to use VMWare on my iMac (Yosemite) and run another Mac OS (10.7.5) in parallel by using VMWare. I have no idea how to do this, I don't even know if it's even possible.
The operating systeme 10.7.5 is installed on another Mac of mine (a Mac Book Air). I made a carbon copy of the whole operating system.
My aim is to be able to jump from my iMac (running OS 10.10.2 with VMWare Fusion installed) to a virtual Mac OS 10.7.5 (the carbon copy of my MacBookAir)
Can anyone help?
Thank you very much.

Some searching at the VMware Fusion site should provide you with an answer.

Can I run two Dell 24" monitors with iMac 27" (5750) in portrait mode

Hi there, want to putchase the 5750-based iMac 27", but I have a pair of Dell 24" monitors I want to run with it, preferably both in portrait mode. Is this possible? Or if not, is it possible with some sort of adaptor/external graphics card?
Thanks kindly for any help:)
Shawn

HI Shawn Glibson,
the imac has one video output. a 30 dollar adapter can be used to hook up a DVI display. (mini-display to dv adapter)
But you can add additional displays through a USB to DVI adapter. For instance see2 xtreame uv200 http://www.trittontechnologies.com/index.php/products/usbvideotechnology/see2-xtreme-uv200/ This is a great solution if you want to have another display for websites, office documents. a USB to DVI adapter isn't that great for 3D games.
I hope that helps
TT

Can I run Snow Leopard on the new iMac

Apple is warrantying me a new iMac because I have had many problems with my current machine. It's a late 2008 Intel Core 2 Duo 2.66 Ghz machine that I have been running Snow Leopard 10.6.8 on. I have a lot of software that runs on Snow Leopard.
They will be replacing it with a new 21.5 inch iMac running Mountain Lion which will be released in the next week or two. My plan was to partition the hard drive, keep part of it for my current Snow Leopard and gradually migrate over to Mountian Lion.
Alas, they have told me that the new machines will not run Snow Leopard at all so partitioning is out of the question but that I can set up a "Virtual Computer" that will allow me to run Snow Leopard within the Mountain Lion Structure. This will allow me to still use my older software in a setup not unlike the Classic system that the early OSX used. The tech told me I would have to get some 3rd party software to do this but was not much more helpful.
Im looking for some specific info on what I need to do to keep my Snow Leopard viable on my new machine while I gradually migrate over to Mountain Lion.
thanks,
Rob

Here is a post that I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopar - not available on the newest iMac;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion - not available on the newest iMac;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.
And according to the author, it's not forbidden by the client EULA. Can't say for sure if the same method will work for Mountain Lion, though. He may have updated it here or on MacRumors, but I'm not aware of an update, or whether one is needed.
I do not give legal advice on MacRumors, I do contend that it is a common Urban Myth that the Snow Leopard EULA forbids its virtualization. Further, in the more than one year that I have been offfering my Snow Leopard into Parallels solution, NO ONE has met my challenge during this period of time to show me one, official written statement by Apple that would support the conclusion that Snow Leopard's EULA forbids its virtualization.
The method does work for Mountain Lion, with the proviso of the NOTE above about currently having to do STEP ONE on a Snow Leopard or Lion Mac.

Can I run 2 monitors off late 2009 iMac 27

My late 2009 iMac 27 monitor just died. But the computer works fine.
I am addicted to using two monitors. The back of the iMac has a Thunderbolt port and a Firewire port.
The Thunderbolt port is now running an external monitor.
1. Is there a way that the Firewire port could be used to run another external monitor?
2. Could a USB to VGA cable support a second monitor?
3. Is there any way to run a second monitor?
Thanks.

Yup, that's really all you need to do - it's that simple. Once the monitor is connected and showing your extended desktop, go to System Preferences - Dsplays - Arrangement, and you'll see two blue rectangles representing the monitors. Drag them into the configuration you'd like (eg, aligned left/right) and you can drag the white menu bar across into the other rectangle to make the new monitor your primary (where you see dock and menus) if you'd prefer.
Matt

Can't run Adobe Bridge on my new iMac :(

I'm the proud owner of a new iMac and used migration assistant to transfer from my old iMac.
I noticed I couldn't use the same account name with the new machine so I used a slightly different one and didn't think anymore of it.
I downloaded Photoshop CS6 (which includes Bridge) directly to the new machine. Photoshop opens and runs beautifully but Bridge refuses to open at all.
The error message is (a very helpful) 'Operation could not be completed'.
A google told me it was something to do with permissions so I created a new account and voilá, Bridge opens just fine in the new account.
Could anyone help me fix the issue? I made sure the program itself had read/write permissions assigned and I trashed the old Bridge preferences. I've run disk utility and repaired permissions there as well but no joy.
Thanks in advance!

Boot to Recovery with Command R
Choose your Language
Click Utilities Menu
Select Terminal
In Terminal Window type resetpassword
Press Return
When Password Reset Utility Appears
Select the HDD where your account is located - Usually Machintosh HD
Select your Account
DO NOT Reset your Password
Locate the section called Reset Home Folder Permissions and ACLs
Click Reset Button and Wait for completion
Restart the mac and check your issue.

Can I run aperture on 2 machines,

Can I run aperture on 2 machines,desktop iMac 27 and a Mac book pro on the same licence, and why is the app store not showing that I have a legal copy.
I think I bought the download direct from the Aperture site not the app store from memory about 3-4 years ago

Just realized two possibly confusing typos:
Frank Caggiano wrote:
Yes you can run the DVD version of Aperture on two systems as yu describe.
The reason Aperture is not showing up in the Mac App Store in your purchases is because the two version are separate. It is not possible to turn the DVD version into the MAC version. ( That should be MAS (Mac App Store) and not MAC )
If you want it to appear in the MAC as purchased you would have to buy it from the MAS
(Ditto here, MAC should read MAS)
Sorry for any confusion.

Permissions ACL Freakout - Activity Monitor Can't Run - Time Machine?

Occasionally, when I repair disc permissions on 1.5.5, I find that virtually every file on my computer says "ACL found but not expected". The repair takes up two two hours to run.
The repair works, but the condition appears to come back every time I run Time Machine. All of this would be a superficial irritation except that I often can't run Activity Monitor, and have to go through the two-hour permissions repair in order to get that it working again.
Ideally, I'd like to prevent the permissions condition from happening and keep Activity Monitor operable. Any ideas?
A few tidbits:
Activity Monitor is in Applications\Utilities
I run Time Machine from an account other than the Admin one
The permissions repair can be done from any account successfully

SuperDuper is fine. Even Disk Utility Restore will do the job.
But I'm beginning to be "cautiously paranoid" with breaking in / testing / torturing / any new drive now (again) for a day or two before putting it into full service. If that sounds hard, just zero the drive and fill it up with junk data that gets reformated later anyway.
Can't go far wrong with WD 640GB $76 from OWC right now. Maybe a couple. Two backup sets for every drive.

HT4437 Can I show a ppt presentation from my imac on Apple tv?

Can I show a powerpoint presentation on my imac through airplay and Apple tv to show on my tv?

You can mirror it if your iMac is mid-2011 or newer and you are using Mountain Lion as per your post.
Regards
Jules

Can my january 2010 22" imac run battlefield 3 via bootcamp?

I really want to play battlefield 3 on my imac, i have windows 7 and an origin account
my graphics card is
ATI Radeon HD 4670 with 256mb memory
and i have 4gb ram
even if i have to play on the lowest graphics can i run it?
ive used the can u run it website but it said i've failed which is strange because its said i failed on a lot of other games i have played but i can run them on maximum graphics
thanks

That's the thing, i dont wanna buy it just to find out that it's not gonna work. Yes i have windows in a partition. It says everything is fine on my computer but the graphics card is slightly lower than the minimum but i think it might work if i set it on low resolution, do you think it'll work?

I have a p6240f. what video card will run battlefield 3 and run on my cpu.

i have a p6240f. what do i need to do to run battlefield 3 and mw3

Hi,
You might want to review the system requirements for Battlefield 3. I don't believe that MW3 is on the market yet although it can be preordered.
You will also need to upgrade the power supply.
As for a video card, I would recommend the AMD Radeon 6850. It's $130 after rebate. The Corsair CX500 is a quality power supply priced at $40 after rebate.
These are the motherboard specifications for your PC. The slot adjacet to the PCI-E x16 slot needs to be vacant.
These HP "how-to" articles should be helpful with the hardware installations.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

I have a new Windows tablet computer with limited hard drive space, and cannot transfer my itunes library to the hard drive. Can I run t media from an external hard drive? If so, how do I transfer my files?

I have a new Windows tablet computer with limited hard drive space (32 GB), and cannot transfer my itunes library to the hard drive. Can I run itunes from an external hard drive? I have tried to follow some of the directions on this site, but am having no success. Thanks.

iTunes will run fine with the media on an external drive.
However, I suggest that a tablet computer with a tiny hard drive is not ideal as the primary computer for managing an iTunes library, even a small one. If you have another machine, perhaps a big, boxy, inexpensive old desktop with a decent amount of storage, that might be a better choice.
http://support.apple.com/kb/HT1364

Can't Run program in Debug Mode

To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------

Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada

HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars.

Can i run Battlefield 3 on My 27" IMac through parallels smoothly ?

Similar Messages

Maybe you are looking for