Can I run CS5 on windows 8?

I' m looking for a new computer and it will have windows 8 on it. My question is, runs my CS5 on this system?

It will run, but there may be issues. Beyond that there is no point in asking for further details. CS5 comes from a time when Win 8 didn't exist and was never tested on it. Any problems you may encounter will have to be resolved as you go along, but at the same time you may not see any issues at all. Depends too much on the specific configuration of your hardware.
Mylenium

Similar Messages

I can't open CS5 in windows 7 it tells me "Programm is locked or you are not legitimated". Bridge and Camera draw are working ok

I can't open CS5 in Windows 7. It tells me "application is locked or you don't have legitimation". Bridge and Camera Raw are OK.

Hi,
     thank you for your answer.
     The original Text photoshop showing me is the following:
     Konnte ein Arbeitsvolumen nicht öffnen, weil die Datei gesperrt ist
oder Sie keine ausreichende Berechtigung haben. Heben Sie den Schutz
der Datei mit Hilfe des Befehls 'Eigenschaften' im Windows Explorer
auf.
     Sorry I can tell you this only in German.
     After Installation the Version 64 Bit couldn't work because of this
sentence (Windows 7 has 64 Bit Version). The 32 Bit Version worked
without problems. The next day both versions didn't work because of
this Informatiom. Bridge and Camera raw workinjg perfect but photoshop
(CS 5) is blocked.

How can I run 2 Dreamweaver windows at the same time?

How can I run 2 Dreamweaver windows at the same time on my
PC?
basically I have 2 monitors and I want to edit CSS on one
monitor and have the html page open on the other so I can quickly
look from one to another with in a split second instead of taking
that extra time to switch back and forth using the tabs at the top,
I know I should probably invest into a mac so i can work out side
of the Dreamweaver application window and I will in the future but
is there any way i can do this on my windows XP pro PC?
Thank you
Maurice

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

How do you create a program in Labview that can be run as a Windows Service?

I would like to create a Labview program that can be run as a Windows service. I have read the following Knowlegebase articles and have done what they say.
Creating a Windows NT Service Using LabVIEW http://www.ni.com/white-paper/3185/en
Running a LabVIEW Application as a Windows NT/2000/XP/Server 2008/7 User-Defined Service http://digital.ni.com/public.nsf/allkb/21BA0F671A63A60386256CB4004DF99B
When trying to start the service I get an error that says the program didn't respond to the start in a timely manner. I also set the "run when opened" parameter in the VI. I am programming in Labivew 2010, proffesional version. The server is running Windows Server 2008. Can anyone help? Is the ini file important in Windows Server 2008?

I haven't looked through all those links. But I have created Windows Services from LabVIEW executables way back when WinXP came on the market.
The problem with services is that they have no UI. So you can't really see what is going on. Your EXE might be failing or hanging due to some kind of error (most liklely a security/permissions error), but you can't see the error. So my advice is to either:
1. Have your EXE write lots of info to a log file. Write info that log every step in the application. If an error ocurrs, have it write the error info to the log file. That is a very useful debugging tool.
2. Use VI Server functions to monitor the service to see what is going on.

Can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server

im my environment we are trying to upgrade from server 2k3 to 2k8, out testing done on server 2k3 to 2k8, but can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server ...kindly suggest
Nitin Gaurav
[email protected]

Yes you can. If you have two 2003 AD servers currently and upgrade one of them to 2008 AD then they'll continue to be able to work together. The domains functional level will remain as 2003 across both servers so at this stage you won't get any benefit from
the new AD functionality available in 2008.
Once you've then upgraded the second 2003 server to 2008 you can then upgrade the functionality levels in AD to make it 2008. It's been a while, but I believe it doesn't happen automatically, so once all AD servers have been upgraded you have to go into
AD and upgrade the functionality levels yourself.

Can I use CS5 on windows xp sp3? [was: install]

can i use cs5 on windows xp sp3

It is highly likely based on a cursory look at the page linked below. If you find the software you wish to install listed in the page linked below you can check to see if it is supported on the system you wish to install it:
http://prodesigntools.com/products/adobe-cs5-system-requirements.html

Running CS5 on Windows Xp; application error "0x6963561b" referenced memory at "0x0000008c"

Running CS5 on Windows XP 2.0 G RAM; 500G hard drive Dell computer 9100; get application error and crash:
"0x6963561b" referenced memory at "0x0000008c" The memory could not be "read"

The latest is the crash on quit: Here is the entire message:; (no mention made of faulting module)
Note: the referenced memory at " " has changed.
Photoshop CS5 Application error:
The instruction at “0x6963561b” referenced memory at “0x000000b8” The memory could not be “read”
CLICK OK to terminate the program
CLICK CANCEL to debug the program

How can i run word through windows on my mac

how can i run word through windows on my mac

It is difficult to understand your question. Do you want to run Word in Windows on your Mac, or do you want to run Word on your Mac?
You can install Office for Mac.
http://www.microsoft.com/mac/products
Or you can install Windows and then install Office for Windows in your Windows installation.

How can I run MP350 with Windows 8.1 computer? Works OK with Windows 7 machine. Need drivers.

How can I run MP350 with Windows 8.1 computer?
It works OK with Windows 7 machine, using drivers from original CD.
Windows 8,1 machine doesn't find those drivers (which I copied to its C drive).
It doesn't find needed drivers on the internet.

Hi Larry-R,
I see that you made a later post regarding this. Please refer to the answer on that post regarding your inquiry.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can i run games for windows in bootcamp?

so can i run games for windows in bootcamp? and will they work properly?
thanks a lot!!
i'm sorry, i posted it here...it should be in "using OS X"...
Message was edited by: Nord1989

Well I'm not to sure by what you mean "Which games run on Mac". There are not many that run on Mac that are that great although there are a few. Mostly for any great games you would need to run Boot Camp. Keep in mind though that you still need a version of Windows, so if you don't have one laying around somewhere you still have to buy that. Here is a link for your Mac games.
http://store.apple.com/us/browse/home/shop_mac/software/games?mco=MjQzNDc3OQ&s=t opSellers
Hope this helps.
If you are wondering about Windows games that you may be looking for I only currently have Left 4 Dead which I have to say is an amazing game! I really don't have many games so I can't help to much in good ones.

Can you run labview on Windows Tablet PC Edition?

Can you run labview on Windows Tablet PC Edition?...or does LabVIEW executable and Run-time engine operate with this OS?

LabVIEW 7.x will run without any problems on a Windows Tablet PC with SP1. There have been documented issues with Windows XP SP2 and LabVIEW subsequently not exiting properly--LabVIEW's window closes but somehow it is still present in the task manager.
Hope this helps.

Can I run CS5 on a Intel Core Duo

I'm running 10.6.7 and CS3 is a dog with Snow Leopard. Can I run CS5 with my old Intel Core Duo
MacBookPro1,2
Canoon

Don't know or I wouldn't be asking. Seems smart to check before I download 20 gigs of Software for a 4 year old machine.

I can't run itunes on windows 7 after upgraded it

I had installed Itunes working properly until last week, with my Ipod Touch. Recently I tried to upgrade the Itunes and after that I can't run it. Supposedsly Itunes was installed but don't run.
Please help me to fix this problem.

I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop).

Can't run Java on windows xp home

I have just downloaded jdk 5 on my windows xp home, and set PATH and CLASSPATH. But i still can't run java commands on cmd.
Please help.

when in the cmd prompt and you type "java" do you get the following?
C:\>java
Usage: java [-options] class [args...]
           (to execute a class)
   or java [-options] -jar jarfile [args...]
           (to execute a jar file)
where options include:
    -client       to select the "client" VM
    -server       to select the "server" VM
    -hotspot      is a synonym for the "client" VM [deprecated]
                  The default VM is client.
    -cp <class search path of directories and zip/jar files>
    -classpath <class search path of directories and zip/jar files>
                  A ; separated list of directories, JAR archives,
                  and ZIP archives to search for class files.
    -D<name>=<value>
                  set a system property
    -verbose[:class|gc|jni]
                  enable verbose output
    -version      print product version and exit
    -version:<value>
                  require the specified version to run
    -showversion print product version and continue
    -jre-restrict-search | -jre-no-restrict-search
                  include/exclude user private JREs in the version search
    -? -help      print this help message
    -X            print help on non-standard options
    -ea[:<packagename>...|:<classname>]
    -enableassertions[:<packagename>...|:<classname>]
                  enable assertions
    -da[:<packagename>...|:<classname>]
    -disableassertions[:<packagename>...|:<classname>]
                  disable assertions
    -esa | -enablesystemassertions
                  enable system assertions
    -dsa | -disablesystemassertions
                  disable system assertionsif not, please follow the instructions on this website on setting up the latest jdk.
http://www.discussjava.com/joomla/index.php?option=com_jd-wiki&Itemid=68&id=index:setting_up_the_1.5_jdk
let me know if it is any help.
null

Can I install CS5 on windows 8

I have a new laptop and I and wanting to install CS5 illustrator. Can this be done on windows 8

According to Microsoft, yes. See for yourself... they provide a handy tool just for that purpose:
Windows Compatibility Center

Can I run CS5 on windows 8?

Similar Messages

Maybe you are looking for