Can i run ddr500 at 500 on neo4??

hey all, two questions:
1:  i've just purchased 2GB of Crucial Ballistix (1GBx2) and am wondering if theres a way to get these to run at 250MHzx2?  When in the bios it seems the settings only go up to 200MHz. 
2:  And does it matter that these sticks have chips on both sides?  Any help would be great.

Ya, you have to OC your system with the Memclock set at 200 ( which is 1:1 ).
Try this :
Memeclock 200
Timings 2.5-3-3-6
Agressive Timings: Disabled
CPU Spread Spectrum: Disabled
FSB 250
CPU x9
HT x4
VCORE 1.425 +6.6%
VDIMM 2.75v
This would put your ram at ddr 500.
Just be aware that the Neo4 has issues with some Winchester Cores right now. If it likes it you should be able to POST at those settings, other wise try HT x2.

Similar Messages

  • Can't run J2EE app on AS 10.1.3

    We have J2EE application based on Toplink/ADF/Struts. Our project is maintained in JDeveloper 10.1.2. We had no serious problems deploying our app to AS 10.1.2. But we cannot deploy it on 10.1.3. server. Before any jsp page shows, this internal error is shown:
    500 Internal Server Error
    java.lang.NullPointerException     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:270)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:42)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:204)     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:239)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:629)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)     at java.lang.Thread.run(Thread.java:595)
    Where can be the problem ? Must we convert aour project into JDeveloper 10.1.3 ? Whe tried it, no success so far. Thanks for any suggestions.

    One small addition - even the simpliest application possible (one jsp, no classes, no data connection) can't run after deploy:
    500 Internal Server Error
    java.lang.NullPointerException     at java.io.File.<init>(File.java:194)     at oracle.jsp.runtimev2.JspServlet.prepareTable(JspServlet.java:564)     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:476)     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)     at java.lang.Thread.run(Thread.java:595)

  • Can I run adobe master collection in a windows partition on a basic mbp 13" with only the intel chipset?

    can I run adobe master collection in a windows partition on a basic mbp 13" with only the intel chipset?
    I want to install 16 gb ram but I don't think I can change the lack of video card. I wanted this basic machine because it has fairly long battery life. I don't need or want retina at this time. My model is the mid 2012 model. I am running the adobe collection for mac, I want to run the windows versions. Is it possible? What is the most ram I could access using something like fusion 5, assuming I could get fusion 5 to work? would it refuse to run because of the intel chipset and lack of video card?
    If I'm wrong and there is a way to add a video card to this model, could some version of fusion and windows 7 access more than 2 gb operating ram?
    What  cost would I be incurring, and would it be cheaper to buy a windows laptop with more ram than I could access via a virtual machine?
    I want to work on a client's work in the windows versions of the creative suite, with occasional usage of after effects for windows, and to use some web plug-ins only available in windows versions, and to try some windows-only video and audio software.
    thanks for any suggestions. While many people have told me I can run everything on my macbook, I am concerned about what I think is a limited amount of ram that can be accessed over the virtual machine partition softwares, and I don't know if what I want to attempt is actually possible.
    My mbp os is 10.8.2 on a 2.5 GHz intel core i5 4 gb 1600MHz DDR3 with 500 hard drive. the basic 13" mid 2012 machine.
    I'm hoping to install 16 G of opertating ram to allow more adobe programs to run concurrently- just when I am working on the mac side.
    also, off track but, for years I have wanted a small  machine that is more easily portable than my 15" machines. I have only had this used machine for a few weeks, but already I have been very satisfied and used it for presentations at clients. I don't want an air because I really want the dvd burner and player. No matter what apple says about wireless, there are decades of legacy work stored on optical discs all over the world, and I don't want to be unable to open something at a client's office because I don't have a dvd drive. Additionally, I have very large files I want to transfer via ethernet or firewire so that the transfer will take less time and be more secure than wifi. I resist apple's trend to make every machine a disposable toy that is viable only a year or so. I have read reviews that label the mbp it a poor value compared to the air. If all you need to do is text and communicate via wifi, many devices will sufice, and an air is certainly the most elegant. But what about the cost of large ssd's and protecting the drive against damage from shock? I want to be able to move this thing around and the small size is much safer inside my padded bag when I sit in narrow airplane seats, crowded trains and other congested spaces. I am much more likely to be able to borrow a large screen in a client's office ( with the use of one of the three adapters I had to buy) than to be able to borrow a dvd drive that has drivers for mac os 10.8.2. I suspect this may be the last generation of machines that have optical drives and ethernet, and that was why I purchased it so that I could continue to do work into the next few years. I am impressed by the retina display, but I need long battery life. And as beautiful as the retina display is, it is even more of a problem when trying to cross platform with the windows world. I wish I could infuence apple to do a trial product flow for a machine designed to work with 80% of the business world that uses windows. How spectacular that would be. With all their expertise and adept hardware design, to create a machine that cross platforms better than a windows machine itself works? Now that would be an accomplishment.  Instead of 8 or 9 percent of the total computer sales, why not aim for a higher percentage? Smart devices will keep moving toward portable computers in power, anyway.

    confused, bothered and bewildered wrote:
    can I run adobe master collection in a windows partition on a basic mbp 13" with only the intel chipset?
    I want to install 16 gb ram but I don't think I can change the lack of video card. I wanted this basic machine because it has fairly long battery life. I don't need or want retina at this time. My model is the mid 2012 model. I am running the adobe collection for mac, I want to run the windows versions. Is it possible? What is the most ram I could access using something like fusion 5, assuming I could get fusion 5 to work? would it refuse to run because of the intel chipset and lack of video card?
    If I'm wrong and there is a way to add a video card to this model, could some version of fusion and windows 7 access more than 2 gb operating ram?
    What  cost would I be incurring, and would it be cheaper to buy a windows laptop with more ram than I could access via a virtual machine?...
    Fusion should work on your machine and if you put 16 GB of RAM in (see http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_160 0MHz_SDRAM), Fusion can access a good portion of that. Also, in a Virtual Machine, the guest OS is presented with Fusion's video card emulation, not what's in hardware on your Mac. Of course, finding Windows 7 now that Win 8 has been released could take some doing and the Win 8 Pro upgrade price is supposed to jump to $200 the end of the month. Add that to the price of Fusion and the extra RAM and you're beginning to get into the realm of low end real PC's.
    As to cross platform, I assume you're aware of BootCamp (http://support.apple.com/kb/HT1461).

  • Can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

    In Cisco Prime, can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

    Allright guys. I appreciate the quick responses. I've worked a lot in CR however i am not understanding the solution so I'd appreciate if you can dumb it down for me. If i understand it correctly you guys are suggesting to make a formula, that either return my group by string (which is a formula in my report) or the Quantity. I tried writing a formula like this
    if ({@param} = 1 then
    GroupName ({@GroupBy})
    else
    {NetPNL.GrossAfterAdj}
    but it seems like CR does not allow you to return 2 different data types. Even if it had worked i would not know what to do from there. Can anyone please dumb it down for me. To make my situation more clear below is an example of how my data is..
    MN 100
    MN 200
    MN 50
    CA 300
    CA 500
    when the data shows in the report, its grouped by state, so it comes out like
    MN 350
    CA 800
    I want the users to decide whether they want it sorted by state  (ascending)
    CA 800
    MN 350
    or Total quantity (asc)
    MN 350
    CA 800

  • Anyone get 2gb Memory to run at 1T in K8N Neo4 Platinum SLI MB?

    I recently upgraded to 2 GB Geil memory in my new K8N Neo4 Platinum SLI system (not the system listed in my signature).  I cannot get it to boot if I set Ram to 1T.
    Has anyone been able to run 2GB at 1T in this MB?
    Thanks.
    fafner

    Thanks all for your comments.
    I have the Geil Value 2x1gb dual channel kit. It is rated at 3, 4, 4, 8.  I can get it to run fine at 3,3,3,8 at 2T.  I cannot get it to boot at 1T with either the rated settings or the faster settings.  It will boot at at 2.5, 3,3,8, but is not stable.
    I can exchange this kit for a higher quality kit, but I don't want to do that unless someone else has had success with runing 2x1gb in this Neo 4 Platinum SLI board.
    The memory I have runs at 1t in my K8Neo2 system as my does my Kingston Value RAM (2x512).  It so happens that I have 2 Kingston value kits (total of 4x512), which I could try but everything I have read says it will run at 333mhz with four stix.
    My experience has been that the K8N Neo2 Platinum is more accepting of value memory in general than the K8N Neo4 Plat/SLI.  I have also read that getting any 2x1gb kit to run at 1T in the Neo4 Platium/Sli board is impossible or at least nearly so.  That is why I am looking for soneone who has success (or no success) with 2x1gb sticks at 1T in the same mb as mine.
    Net I want to get the best 2gb configuration possible but onle one that someone already has experience with (since I can only exhange the Geil kit once).

  • I have a new Windows tablet computer with limited hard drive space, and cannot transfer my itunes library to the hard drive. Can I run t media from an external hard drive? If so, how do I transfer my files?

    I have a new Windows tablet computer with limited hard drive space (32 GB), and cannot transfer my itunes library to the hard drive. Can I run itunes from an external hard drive? I have tried to follow some of the directions on this site, but am having no success. Thanks.

    iTunes will run fine with the media on an external drive.
    However, I suggest that a tablet computer with a tiny hard drive is not ideal as the primary computer for managing an iTunes library, even a small one. If you have another machine, perhaps a big, boxy, inexpensive old desktop with a decent amount of storage, that might be a better choice.
    http://support.apple.com/kb/HT1364

  • Can't Run program in Debug Mode

    To: [email protected]
    cc:
    Subject: Can't Run program in Debug Mode
    Has anyone else experienced this problem? We have written a non-express
    program that uses the Express generated services project as a supplier
    plan. However, when we try running this program in debug mode about 50%
    (or more) of the time we abend while Forte is trying to partition the
    application. Since we have many database classes in our Business Model we
    are wondering if Forte is timing out during the partition phase or if the
    server partition is running out of memory . The following error messages
    are produced by Forte. Any suggestions???
    =======================
    Error messages on client:
    =======================
    SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
    any
    of the nodes to which it has been assigned. See the remainder of the
    error
    stack for more information.
    Class: qqsp_ResourceException
    Error #: [1602, 593]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
    Last TOOL statement: method overview.StartApplication
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
    admin2.
    Class: qqsp_ErrorDescriptor
    Error #: [1602, 592]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Lost contact with remote server while trying to load
    partition
    testacadprogoffer_CL0_Part1. Check server log file for more information
    about
    the specific problem.
    Class: qqsp_ResourceException
    Error #: [1301, 102]
    Detected at: qqem_IPartitionAgent::Startup at 5
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Tue Dec 02 12:56:00
    Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
    (object name Unnamed) from partition "Forte_Executor", (partitionId =
    F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Received close: Connection aborted (10053).
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    =======================
    Log messages on server:
    =======================
    Attached to manager for node admin2.
    aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
    aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
    aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
    aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
    aud Tue Dec 2 10:47:03 : Loading partition
    EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
    owner's partition.
    aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
    aud Tue Dec 2 11:09:26 : Unloaded partition
    EvaluateApplRequirementsBO_CL0_Part1.
    aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
    aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
    FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:49:01
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
    askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
    "Forte Runtime", pid 14020 on node admin2 in environ
    ment CentralEnv.
    FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:48:57
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    ERROR: TMgr.RunThread: task cm.Recv failed terminating.
    Probably caused by a FATAL exception.
    David Wilbur email: [email protected]
    University of Windsor phone: 519-253-3000 ext. 2779
    Windsor, Ontario Canada
    -----------------------------------------------

    Hi,
    We have had the same problem in a non-express application
    with a heavy server partition. In our case, the error was not
    systematic, depending on the server workload at the time we
    tried to partition and run.
    The work-around we're using is to put the -fm flags (increasing the x
    parameter to say 30000) in the 'server arguments' of your server
    partition
    properties in the partition workshop. Note that if your server is a Unix
    platform,
    you need to put double-quotes before and after the parenthesis in the -fm
    syntax.
    Hope this helps,
    Vincent Figari
    BTW, what Forte version are you using ?
    On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
    writes:
    >
    >
    >
    >
    >
    To: [email protected]
    cc:
    Subject: Can't Run program in Debug Mode
    Has anyone else experienced this problem? We have written a
    non-express
    program that uses the Express generated services project as a supplier
    plan. However, when we try running this program in debug mode about
    50%
    (or more) of the time we abend while Forte is trying to partition the
    application. Since we have many database classes in our Business
    Model we
    are wondering if Forte is timing out during the partition phase or if
    the
    server partition is running out of memory . The following error
    messages
    are produced by Forte. Any suggestions???
    =======================
    Error messages on client:
    =======================
    SYSTEM ERROR: Unable to start the partition
    testacadprogoffer_CL0_Part1 on
    any
    of the nodes to which it has been assigned. See the remainder of
    the
    error
    stack for more information.
    Class: qqsp_ResourceException
    Error #: [1602, 593]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
    Last TOOL statement: method overview.StartApplication
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
    node
    admin2.
    Class: qqsp_ErrorDescriptor
    Error #: [1602, 592]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Lost contact with remote server while trying to load
    partition
    testacadprogoffer_CL0_Part1. Check server log file for more
    information
    about
    the specific problem.
    Class: qqsp_ResourceException
    Error #: [1301, 102]
    Detected at: qqem_IPartitionAgent::Startup at 5
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Tue Dec 02 12:56:00
    Distributed method called:
    qqrt_ForteExecAgentProxy.LoadPartition!6
    (object name Unnamed) from partition "Forte_Executor",
    (partitionId =
    F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Network partner closed connection. This usually means
    the
    process at the other end of the wire failed. Please go look there
    and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Received close: Connection aborted (10053).
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    =======================
    Log messages on server:
    =======================
    Attached to manager for node admin2.
    aud Tue Dec 2 09:34:36 : Loading partition
    testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
    aud Tue Dec 2 09:41:59 : Unloaded partition
    testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 09:49:44 : Loading partition
    testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
    aud Tue Dec 2 10:00:12 : Unloaded partition
    testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 10:18:34 : Loading partition
    testacadprogoffer_cl0_Part3
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
    aud Tue Dec 2 10:27:00 : Unloaded partition
    testacadprogoffer_cl0_Part3.
    aud Tue Dec 2 10:47:03 : Loading partition
    EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
    agent
    owner's partition.
    aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
    aud Tue Dec 2 11:09:26 : Unloaded partition
    EvaluateApplRequirementsBO_CL0_Part1.
    aud Tue Dec 2 12:36:14 : Loading partition
    testacadprogoffer_CL0_Part1
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
    aud Tue Dec 2 12:45:17 : Unloaded partition
    testacadprogoffer_CL0_Part1.
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
    FATAL ERROR: ************* Out of Memory, requested (1K) available
    (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:49:01
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
    askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
    application
    "Forte Runtime", pid 14020 on node admin2 in environ
    ment CentralEnv.
    FATAL ERROR: ************* Out of Memory, requested (1K) available
    (0K)
    Class: qqsp_ResourceException with ReasonCode:
    SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:48:57
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    ERROR: TMgr.RunThread: task cm.Recv failed terminating.
    Probably caused by a FATAL exception.
    David Wilbur email: [email protected]
    University of Windsor phone: 519-253-3000 ext. 2779
    Windsor, Ontario Canada

  • HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

    I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

    Welcome to the Apple Community.
    Enter the details of her second account at system preferences> mail, contacts & calendars.

  • How Can I Run A SQLJ Normal Project In SAP NWDS

    I have a question about SQLJ in SAP NWDS.
    1.I created a java dictionary project,and then create the table , then depoly it.it's ok.
    2.I created a java normal project including the above java dictionary project.
    3.I used the SQLJ tech in the java normal project,exporting the opensqllib.jar,sqljapi.jar,sqljc.jar,sqljimpl.jar.
    4.I coded the normal project,and export the project .jar,everything is ok.
    <b>5.But when i runed the project in NWDS,the error appeared:java.lang.NoClassDefFoundError: com/sap/sql/log/OpenSQLException
         at com.ezkj.deom.sqlj.MainApp.main(MainApp.java:21)
    Exception in thread "main"</b>
    How Can I Run A SQLJ Normal Project In SAP NWDS?
    PLS Help me and don't let me alone!

    Tony,
    Why not try to import your SQLJ project in SAP NWDS. Add all the jars mentioned to the project path both for compile time as well as runtime. Now try running he project. Once you are able to bypass java.lang.NoClassDefFoundError, you will get other errors related to SQL statements. These Oracle SQL statements needs to be converted to OpenSQL format.
    Chill out!!!
    Sukanta Rudra
    Note: If helpful, plz donate some points.

  • Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

    Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
    Thanks so much

    Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
    *[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
    *Web developer Tools > Web console
    If you post the results with out the user data, we are happy to help.

  • I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

    Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    You run Windows in Parallels or Fusion. Then in Windows you install the program.

  • The Firefox window doesn't open at all I can't run safe mode or make other trubleshot changes

    since yesterday 08/10/2011 the Firefox window doesn't open at all I can't run safe mode or make other trubleshot changes. When I click on the desktop short-cut the Firefox windows starts loading but before open is crushing.I have sent several messages to you but no answer and my Firfox is not working.

    Which version of Firefox and which OS are you using?
    There are other ways of opening safe mode given at http://kb.mozillazine.org/Safe_Mode - See if that helps.

  • I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

    I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

    We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • After closing the Firefox browser, a message appears "Severe error: Cannot load resource file; can not run". What could be wrong?

    The message: "Severe Error; Can 't load resourse file; can not run" appears after closing Firefox4. All other applications on my pc do not have this problem.

    I've found text of this error in npdjvu.dll plugin, remove it and error seems to disappear.

Maybe you are looking for