Can I run DSCC as user other than noaccess?

Running DS 6.3 on Sparc Solaris 10. Using package install; when I perform the dsccsetup initialize, the DSCC directory is created but runs under the noaccess userid. I would like to run this process under a different user. So I tried the following:
Stopped the DSCC.
Modified the dse.ldif under /var/opt/SUNWdsee/dscc6/dcc/ads/config:
changed nsslapd-localuser: noaccess to
nsslapd-localuser: someuserid
Changed directory and file ownership to new userid
chown -R someuserid /var/opt/SUNWdsee/dscc6/dcc
Started the DSCC.
The process starts up fine and reports no errors, but when I try to access the DSCC under the webconsole, it reports an error on the web page that it has a problem accessing the DSCC configuration data.
Is it possible to change the DSCC user id? If so, how?

Thanks for the suggestion etst123.
Unfortunately modifying the state file did not make a difference. Like before, the DSCC directory instance starts up as the new user id I specify, reports no errors, and I can even issue an ldapsearch from the command line and successfully get the contents of the DSCC directory data.
Given that, I'm wondering if there is something more that needs to be done in getting webconsole or cacao updated with the change. Problems seem to be simply accessing the DSCC thru the web interface. Instead of getting the web page prompting me for the DSCC admin username and password, I get a page with an "Unexpected Error" message indicating there is a problem reading the DSCC configuration data.
Unfortunately there is very little documentation associated with tweaking the DSCC.

Similar Messages

Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.

Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.
Actual accounts & contacts need to be route around 2000 & 3000 but we have observed lakhs of records routing into local DB.
We have verified all the Assignment Rules, Views.
We ran docking object visibility rules and we have observed that some other accounts are routing due to Organization rule passing. (these records are not supposed to route).
Version Siebel 7.7.2.12,
OS Solaris.

let me know what would be the reason that 1st million takes only 15 minuts and the time goes on increasing gradually with the increase of dataYes that's a little strange. I only can guess:
1. You are in archivelog mode and the Archiver is not able to archive the redo logs fast enough
2. You don't use Direct Load and DBWR ist not able to write the direty block to disk fast enough. You could create more DBWR processes in that case.
3. Make a snapshot of v$system_event:
create table begin as select * from v$system_event;After the import run
create table end as select * from v$system_event;Now compare the values:
select * from begin order by TIME_WAITED_MICRO descwith the values given you by
select * from end order by TIME_WAITED_MICRO descSo you can look where your DB spent so much time waiting for something.
Alternativly, you could start a 10046 trace on the loading session and use tkprof.
Dim

Can't run command because user is in read-only mode.

Hi
I try to execute any sql statment i am getting this error.
Can't run command because user is in read-only mode.

user493528 wrote:
I am having the same issue with Benthic when I do the With clause.
I understand this is not related to Oracle but did anyone had issue related to this. I am getting the same error. Is it related to ODBC driver of how Benthic use to connect etc.,? I do not know.
Thanks
Gopihttp://www.benthicsoftware.com/support.html

CUIC 8.5 Unable to "choose collection" for users other than Admin/Superv

Hi,
When login with any user other than the admin, I'm not able get any entry in the "choose collection" drop down menu for any type of report. While investigating it seems this is restricted by the option Security / User Permissions / System Collections (UCCE). I can see how all the teams has assigned the admin user for read, exedcute and write. In addition also the supervisor of the team is added to the list and I have checked and confirmed that the supervisor can get the collection of his/her team.
There is a list on the right hand side to be able to add additional user permissions however when I try I get the error "System Collections (UCCE) permissions can't be modified". Obviously having just the supervisor of the team being able to list their team is not good enoguh and I would expect changing the permissions here is possible.
Has anyone come accross this problem or do you have any tips before openign a TAC case?
Thanks
Isidro

I should also note something that I did that I think may be causing the default wiki and blog theme to not appear. In Server Admin, selecting Web, then going to Settings and on the Web Services tab, I changed the Data Store path to:
/Library/WebServer/Documents
I did this thinking it would create the html pages in the directory that the placeholder page was indicating that I should put my web page, but I think that is wrong, now. Does anyone know the default path for the data store?

How to create user other than 'sa' to connect database server in SAP SBO

I want to ask how the step for create user other than 'sa' to connect database server in SAP SBO? Until now I use 'sa' (default) for connect to database server in SAP SBO application.
Can I do that?

You may create multiple SQL users to give full right to B1 database instead of using 'sa' user.
However, the preferred way would be by Use Trusted connection when you set the connection to SQL Server. In this way, you just need one more user for SQL. A group of window users could use this SQL access to connect database server.
Thanks,
Gordon

How can I buy films in languages other than German in Germany? Quite disappointed, i would line to watch films in Original language and not dubbed in strange ways...

How can I buy films in languages other than German in Germany? Quite disappointed, i would like
to watch films in Original language and not dubbed in strange ways...

You are at the mercy of the content owners/copyright holders. They decide what the Apple can sell in each iTS.
MJ

Sbi mobile banking is not working in iphone4. i can't make video call to other than iphone4

sbi mobile banking is not working in iphone4. i can't make video call to other than iphone4

What troubleshooting steps have you tried? Have you tried resetting the iPhone? or restoring it?

I'm new to ipod touch, 4g and my question is how can i download a contact list other than through facebook etc.

I'm new to ipod touch, 4g. My questions is how can I download a contact list other than through facebook or yahoo or gmail?

You can sync the iPod's Contacts app with some other contact programs/mail accounts.
Just where do you want to get/sync the contacts?

HT4550 My bar on my safari is gone, as in i can't go on any website other than the apple store

My bar on my safari is gone, as in i can't go on any website other than the apple store. how do i get the google bar back!!!

View > Show Toolbar

I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

go to settings
then to store
tap your id then click sign out
then sign back in and you should be fine

USERS OTHER THAN ORACLE DEFAULT USERS IN DATABASE

Hi,
I want to get users other than default oracle users.I used the below query still i get default users
select username from dba_users where username < >'SYS' ;
DIP
MDDATA
ORACLE_OCM
SCOTT
SYSMAN
CTXSYS
DBSNMP
EXFSYS
XDB
SI_INFORMTN_SCHEMA
ANONYMOUS
DMSYS
WMSYS
ORDSYS
OLAPSYS
ORDPLUGINS
MDSYS
MGMT_VIEW
SYSTEM
OUTLN
I want users that are created how to get that.
Pls help me with the query.
Thnx

1* select username, created from dba_users order by 2
SQL> /
USERNAME                 CREATED
SYSTEM                      15-AUG-09
SYS                      15-AUG-09
OUTLN                      15-AUG-09
DIP                      15-AUG-09
ORACLE_OCM                 15-AUG-09
DBSNMP                      15-AUG-09
APPQOSSYS                 15-AUG-09
WMSYS                      15-AUG-09
EXFSYS                      15-AUG-09
CTXSYS                      15-AUG-09
ANONYMOUS                 15-AUG-09
USERNAME                 CREATED
XDB                      15-AUG-09
XS$NULL                  15-AUG-09
MDSYS                      15-AUG-09
ORDSYS                      15-AUG-09
SI_INFORMTN_SCHEMA            15-AUG-09
ORDDATA                  15-AUG-09
ORDPLUGINS                 15-AUG-09
OLAPSYS                  15-AUG-09
MDDATA                      15-AUG-09
SPATIAL_WFS_ADMIN_USR            15-AUG-09
SPATIAL_CSW_ADMIN_USR            15-AUG-09
USERNAME                 CREATED
SYSMAN                      15-AUG-09
MGMT_VIEW                 15-AUG-09
APEX_030200                 15-AUG-09
APEX_PUBLIC_USER            15-AUG-09
FLOWS_FILES                 15-AUG-09
OWBSYS                      15-AUG-09
OWBSYS_AUDIT                 15-AUG-09
SCOTT                      15-AUG-09
IX                      07-MAY-10
BI                      07-MAY-10
SH                      07-MAY-10
USERNAME                 CREATED
HR                      07-MAY-10
PM                      07-MAY-10
OE                      07-MAY-10
DBADMIN                  07-MAY-10
BONGO                      22-MAY-10
USER1                      30-AUG-10
SAM                      29-SEP-10
40 rows selected.
SQL> SELECT USERNAME FROM DBA_USERS WHERE CREATED > TO_DATE('2009-09-09','YYYY-MM-DD');
USERNAME
USER1
BONGO
DBADMIN
HR
SAM
OE
SH
PM
BI
IX
10 rows selected.
SQL> still confused?
Handle:      newbie
Status Level:      Newbie
Registered:      Jul 1, 2010
Total Posts:      57
Total Questions:      44 (40 unresolved)
so many questions & so few answers.
Edited by: sb92075 on Oct 14, 2010 10:15 AM

Can I run a different user as the managed server than the admin server?

Under unix, can I run a Weblogic 7 managed instance as a different user than the
admin server in the same domain? If not, any reference docs on BEAs site?

You mean a different UNIX user? Yes, that should be fine.
-- Rob
Frank wrote:
Under unix, can I run a Weblogic 7 managed instance as a different user than the
admin server in the same domain? If not, any reference docs on BEAs site?

Can you run a different user on the managed server than the admin server?

Under unix, can I run a Weblogic 7 managed instance as a different user than the
admin server in the same domain? If not, any reference docs on BEAs site?

That shouldnt pose a problem.
anand
In article <3f679e4d$[email protected]>, Frank wrote:
>
Under unix, can I run a Weblogic 7 managed instance as a different user than the
admin server in the same domain? If not, any reference docs on BEAs site?

Running the App Server as a user other than root

We used to use iPlanet Web Server which during installation allowed you to specify which user you wanted to run the Web Server. This was very good for security. How do you do this with the App server ?
Thanks
PS We are running it on Solaris 9.

Application Server 7 expands on the flexibility offered in the web server.
The most basic means to define app server instances with non-root users is to create an administrative domain (basically, an admin server instance) using the user ID of interest. As you create new application server instances in the admin domain, you can assign the same user ID to the instances.
(There is an admin domain that is initially configured as part of the app server installation. If you installed the product as root, then the admin server and the initially configured app server instance are owned by root. If you do not want these instances to be owned by root, you should remove this admin domain and create a new one that is owned by a non-root user.)
For example, with the following command, I've created a new app server config (an administrative domain) containing an admin server owned by user "ckamps":
root@canteloupe-{}: asadmin create-domain sysuser ckamps adminuser admin adminpassword password adminport 5050 ckamps.domain3
Created Domain ckamps.domain3 successfully
root@canteloupe-{}:
Then I create an app server instance within this admin domain:
root@canteloupe-{}: asadmin create-instance domain ckamps.domain3 sysuser ckamps --instanceport 80 instance1
Created Instance instance1 successfully
Note the use of the "--sysuser" option to specify the user that owns both the admin domain as well as the app server instance.
You can either use root to define the admin domain and the instances (in which case you need to specify the sysuser option to force a non-root ownership) or you can use a non-root user to define the admin domain and app server instances. In the latter case, specification of the sysuser is not required.
Since my instance is defined to listen on a privileged port, I'll need to set the "run as user" in the <instance-dir>/config/init.conf file (similar to magnus.conf in Sun ONE Web Server 6) AND ensure that I start the instance as root. Once the server instance starts up as root, it will automatically switch to the run as user.
The "User" setting below is the "run as user" specified in the admin console's "Create new instance" wizard.
<snip of init.conf>
NetsiteRoot /usr/appserver
ServerID instance3
ServerName canteloupe
PidLog /var/appserver/domains/ckamps.domain3/instance3/logs/pid
User ckamps
DNS off
</snip>
Alternatively, you can start up the newly defined admin server and create the new app server instance through the admin console.
Hope this helps,
Chris

Run the startup script (start and stop) with a user other than oracle

hi
I wrote a script that stops and start oracle. the connection to the db was done : sqlplus "as sysdba".
The script works fine if oracle user runs it. however, I need another user to run this script also. The script does not run with this user even though I added it to the oracle group.
any idea please?

try the -c option with the su like this:
su - oracle "-c scriptyouwrote.sh"
greetings

Can I run DSCC as user other than noaccess?

Similar Messages

Maybe you are looking for