Can I run Excel 2007 on a Mac?

Can anyone tell me if it's possible to run Excel 2007 on a Mac? I have Excel 2008 but I'm preparing for an exam which requires me to use Excel 2007.

No.
There is a 2004 and 2008 version for OS X but no 2007 version for Mac.

Similar Messages

  • Can I run Excel 2007 in Boot Camp and run XLSM files?

    Since I have found no way to run Excel 2007 files with macros (xlsm format) on a Mac using Excel 2004, 2008 or NeoOffice, does Boot Camp offer support for running Excel 2007 with V.B. Macros? How about in Fusion or Parallels? Anyone know? Any PC switchers out there who have done this?

    I read somewhere that there was a problem with certain incompatibilities in the hardware. I guess the only thing to do is just install everything and test the macros. It'll work or it won't. I'll post the results when I have them. Thanks.

  • I am running Excel 2007

    I am running Excel 2007 and have been working on files and ONLY saving them to my USB memory stick.
    On connecting the device to my PC (using an extension USB cord) I noticed a very brief minute blue like spark, and didn'y release until I tried to access my files that the entire content was wiped.
    Excel cannot open the file 'LostFile_XLSX_608879.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file.
    Well I think it looks fine to me, and I endeavoureed to use the Open & Repair when openng the file too, with no luck.

    Well, this problem occurs when excel file gets corrupted or damage. In such case, When you try to open the .xls or .xlsx file, your whole document will not open properly and only characters displayed on the screen. For this, you should take the help of
    professional excel recovery tool. The tool is capable to repair corrupt excel file and recover the file in their original format.
    Excel Restore Toolbox can help you.
    http://www.excel.restoretools.com/

  • Can't send Excel 2007 File via Send To Email Option after Acrobat Install

    Normally, you can send an Excel 2007 file via email to someone by going to the Send option on the Excel file menu and choosing "Email." This will email an actual copy of the Excel 2007 file. However, since installing Adobe Acrobat  9 pro on my computer, this option, as well as the option to send to XPS are gone -- the only email option I have on that menu is to convert the file to a PDF and email it.
    It seems to me that Acrobat should ADD options to menus but not remove any! Does anyone know how I can get those missing options (especially the one to email the actual file itself) back? I've tried Googling up a solution, but to no avail so far.
    Thanks, in advance, for any help!
    Laura

    Thanks for taking the time to respond, Aditya!
    I saw that MS support article when I was trying to solve this issue on my own, but the solutions it proposes won't work for me -- I can't set Outlook as my email client (this is a work computer and we use Lotus Notes) and I can't muck around in the registry (again, this is a work computer). I know I can attach the Excel via the attach command in the email client, but the main thing is I don't understand why Acrobat has removed that option from the Excel menu. Also, it removed the Send to XPS option (which I don't really care about, but it bothers me because it shouldn't be deleting anything)!
    I even tried adding the Email command to the Quick Access Toolbar in Excel -- it let me add the button, but, when I click it, absolutely nothing happens.

  • HT204053 Can I see Excel and Word for Mac documents on icloud?

    Can I see Excel and Word for Mac documents on icloud?

    No, I already have Microsoft Office for Mac on my macbook and on my imac.  I want to share the documents from one (imac) to the other through Icloud.   But it doesn't show them as an option.   How do you share documents on one computer to the other within the same house?  

  • Can I run two versions of the Mac operating system on one computer?

    Can I designate one hard drive to run OS 10.6.8 and another to run Mountain LIon and switch between the two?
    I use software that would not run on Mountain Lion and would break the bank to both upgrade and  buy a new Mac.

    The EFI/firmware generally prevents you from running older OSX than what was shipped with the system.
    My system can do what you propose because it came with SL, and can also run ML.
    A new system that was designed to run Lion or ML will need to play very special and marginal tricks to run SL.
    Some systems un der the Apple refurbished list are olde enough to run SL but new enough to run ML, and come with 1-year Apple warranties.

  • Can I run Apple TV on a Mac Mini?

    Can i run Apple TV through a computer?

    No. Not sure of the application you're trying to achieve, ATV is a media streaming set top box that connects to an HDTV.
    More clarification on what you need would help

  • Can't open Excel 2007 workbooks on version 2003

    Hi,
    I saved a workbook using excel 2007 and now when someone using version 2003 try to open it, this error message appears: "Workbook format .xlsx is supported only from office excel 2007 version".
    Does anyone know how to fix this without having to install office 2007?
    Thanks in advance.
    Best regards,
    Rogério

    Hi again,
    I tried your advice and I get a new error message saying "The workbook is corrupt and cannot be loaded"..
    Any other sugestions???? :s
    Thanks!
    BR,
    Rogério

  • How can I run microsfot Word on my mac?

    Just wondering how I could get and run microsoft word on my mac!
    Thanks

    Office 2004 does not work on Lion. You need 2011 or 2008.
    2004 is a PowerPC application and they are no longer supported on Lion.

  • I can't open excel file on a mac!

    Hey All,
    I have been working on an excel file using both a mac and a pc. However, today I can't seem to open the file on my macbook (snowleopard) but I CAN open it on a PC. What is going on? I need to be able to open the file on my mac and a pc. At first I thought it was because I am running out a memory on my mac, however I tried opening the file on a desktop mac with a lot of memory, but the same thing seems to happen. Does anyone have any ideas what is going on????

    Yes, use the SL retail disc; hold down the C key on start up (wait for the chime if it's a bluetooth keyboard) until the Apple logo appears.
    OK the language page, then ignore the installer and go to the menu bar, Utilities menu > Disk Utility.
    Booted from the DVD you will now be able to use the 'Repair Disk' button to repair the HD.
    Run 'Repair Disk' again after repairs have been reported, until the green message "The Volume Macintosh HD appears to be OK" appears.
    Then Quit DU, quit the installer and restart from Macintosh HD.
    There should be no loss of data, but you should always have a backup of that anyway.
    If a message appears saying DU can't repair the drive, repost here for further instructions.

  • Can i run two monitors on a mac mini?

    I'm wondering if I can run a 5 year old cinema display and a cheap flat screen monitor on a mac mini. Someone at Apple said yes but someone at a Mac store said no.

    OK, I am a musician also and I just purchased a Mac Mini (late 2010 version).  So I can tell you with out a doubt that it has support for 2 monitors of any kind.  If your cinema display has the Apple ADC connector it is going to be tough. Some people use the displayport to dvi adaptor connected to a DVI to ADC adaptor and plug and claim to have it working. I have NO IDEA how it would.
    The MINI comes with this adaptor:
    Mini-DVI to DVI-D Adapter Cable for Apple Mac
    http://www.amazon.com/Mini-DVI-DVI-D-Adapter-Cable-Apple/dp/B002TIU34Y/ref=sr_1_ 8?s=electronics&ie=UTF8&qid=1307469596&sr=1-8
    FOR ALL OTHERS:
    Apple - Video adapter - mini-DVI (M) - DVI-D (F)
    http://www.amazon.com/Apple-Video-adapter-mini-DVI-DVI-D/dp/B000EHSN9Y/ref=sr_1_ 4?ie=UTF8&s=electronics&qid=1307470096&sr=1-4
    HDMI-to-DVI Video Cable
    http://www.amazon.com/SPDIF-Component-Ypbpr-Converter-v1-3b/dp/B002SFT3ZI
    Mini Displayport to VGA Cable Adapter for Apple Macbook, Macbook Pro, iMac, Macbook Air, and Mac Mini
    http://www.amazon.com/Displayport-Cable-Adapter-Apple-Macbook/dp/B002HU39BS/ref= dp_cp_ob_e_title_2
    Mini-DVI to DVI-D Adapter Cable for Apple Mac
    http://www.amazon.com/Mini-DVI-DVI-D-Adapter-Cable-Apple/dp/B002TIU34Y/ref=sr_1_ 8?s=electronics&ie=UTF8&qid=1307469596&sr=1-8

  • Can I run Thunderbird on a PowerPC Mac running 10.5.8?

    I have a PowerPC Mac running 10.5.8. I've used Eudora for over a decade, but it's very antique, and apparently RoadRunner just did some security updates, so now I can receive but not send.
    Thunderbird's System Requirement page says it should run on my computer, but when I download it I get "You cannot use this version of the application Thunderbird with this version of Mac OS X."
    Am I doing something wrong, or is the system requirement page incorrect?

    The versions start at 10.6 by my reading http://www.verizon.com/Support/Residential/internet/highspeed/networking/troubleshooting/portforwarding/123866.htm#
    Perhaps tenfourbird http://en.sourceforge.jp/projects/tenfourbird/
    Tenfourbird is unofficial build of Mozilla Thunderbird for PowerPC based Mac OS X.

  • Can't run iMovie 08 on my mac mini

    I bought a mac mini OS X 10.4.11 recently (1.42 GHz PowerPC G4, 1GB, Intel processor, PowerMac 10.1, 167 MHz). I tried to load iMovie 08 but couldn't as I need 2GHz or a G5. Is it possible to upgrade this mac mini so I can run iMovie 08? Don't have alot of money to spend on a new Mac, so was hoping to upgrade. If so, how do I do this. Thanks.

    Welcome to Apple Discussions!
    Unfortunately, there is no practical way to upgrade a 1.42 G4 Mac mini to a specification sufficient to run iMovie 8 since iMovie 8 requires an Intel processor, or a G5 system running at least 1.9GHz.
    However, if you have tried to install iLife 08, you can download iMovie HD (the previous version of iMovie) which will install and run on that system. When you try and install the earlier iMovie after installing other iLife 08 components, it should search the system for a qualifying product and find sufficient of the iLife 08 software to install and run.
    iMovie HD is a little more complex and sophisticated than iMovie 08, but many users significantly prefer it.
    Oops, forgot: the iMovie HD download can be found at http://www.apple.com/support/downloads/imovieHD6.html
    Message was edited by: AndyO

  • How can I run Internet Explorer on my Mac?

    I have to use Internet Explorer for work and it won't seem to work on my Mac. Can someone teach me how to run IE on Mac OS? Thanks in advance!

    The best way to run any version of IE is to run it in Windows on a virtual machine like VirtualBox... it will be fully compatible since your actually running Windows.
    You can also take a program like Wineskin (free) or Crossover (not free), and use it to run IE6 or IE7, but IE 8 and 9 won't run yet, and even 6 and 7 have a few minor issues here and there.

  • Can't run sidecar AIR installer on Mac OS X from UDF 1.0.2 image

    I'm experiencing another AIR installer issue, this time trying to run an AIR 2.5 sidecar installer for Mac OS X that is placed on a UDF 1.0.2 image (created with Toast 10).
    The error in the Console when double-clicking the installer.app is:
    udf error: errno_t UDFFileNode::ReadPathComponent(uint8_t*, off_t*, bool*): Incomplete path component
    Occasionally, I get additional errors reported from AIR:
    ([0x0-0x223223].com.adobe.air.Installer[10852]) Exited with exit code: 4
    Trying to run the installer in Terminal:
    sudo dtruss /Volumes/UDFImage/mine.app/Contents/MacOS/Adobe\ AIR\ Installer
    results in:
    dtrace: failed to execute /Volumes/mine/mine.app/Contents/MacOS/Adobe: file is set-id or unreadable [Note: the '-c' option requires a full pathname to the file]
    It seems there is some undesired path truncation occurring.
    So these errors seem to be path related, and stem from a difficulty running the actual Adobe AIR Installer binary in the sidecar application package (in the bundle at /Contents/MacOS/Adobe AIR Installer. This application installer runs fine from hard drive, I know I've built it properly. It just fails when run on Mac OS X (10.6.4) from a UDF 1.0.2 image. The same image contains a Windows version of the installer which installs fine on Windows XP in my testing.
    Is there a known issue with AIR on this?

    Hello,
    There is a problem with UDF file systems found on DVDs and symbolic links braking.  The Adobe AIR installer bundle makes use of a few symbolic links, so this might be related.  Could you try navigating from Finder into the installer bundle to this directory:
    Select one of the symbolic links and try to resolve it by pressing Cmd + R?  Does it resolve to the correct file?
    This issue was fixed in Toast 10 Titanium with version 10.0.6.  It still exists with Apple's built in tools. When using Disk Utility or the command line hdutil the symbolic link will remain broken.
    Thanks,
    Chris

Maybe you are looking for

  • How to create a new component in CRM 7.0?

    while creating a new component with search and result options... main window is not created automatically. when tried to create it manually its giving short dump. kindly let me know what could be the reason for this problem? thanks alot.

  • How to eliminate empty lines in Flat file.

    Hi All, How to delete the empty lines in flat file,i am explaining below with data Here we have 3 fields with field lengths 30,10,34  i am checking the condition in message mapping if the middle field containing 9999999999 i am deleting the total rec

  • Line Item having different currency

    Hi, Two line items in order are having two different currency. In the client legacy there are having this provision, and the same they want in SAP.Can this be processed? If so how. Sold  to and Ship to Party are same and the one place only. kindly ad

  • Please Great Masters: how to update images in ScrollingImagePanels ????????

    I have posted an old topic but now i understand my error. Please people!!!! I think it is very simple, but i am not getting results at updating images in ScrollingImagePanels. My ScrollingImagePanel in a JInternalFrame, and the JInternalFrame is in a

  • Automatically accept VeriSign certs?

    Hi all. I'm pretty new to SSL so any help with this question would be appreciated. I have a web service app running on a WebLogic 10.3 server (let's call it ServerA). This web service app also contains a web service client to make calls to another we