Can I run fcpx

Hi there,
Can I run fcp x with this graphics card?
Chipset Model:    GeForce 8600M GT
  Type:    Display
  Bus:    PCIe
  PCIe Lane Width:    x16
  VRAM (Total):    256 MB
  Vendor:    NVIDIA (0x10de)
  Device ID:    0x0407
  Revision ID:    0x00a1
  ROM Revision:    3175
  Displays:
Color LCD:
  Resolution:    1440 x 900
  Depth:    32-Bit Color
  Core Image:    Hardware Accelerated
  Main Display:    Yes
  Mirror:    Off
  Online:    Yes
  Quartz Extreme:    Supported
  Built-In:    Yes
Display Connector:
  Status:    No Display Connected
Thanks,
rwa

Apparently not
http://support.apple.com/kb/ht4664

Similar Messages

  • Why i can't run fcpx on iMac 3.06 Ghz core 2 duo with 16Gb ram?

    I Can't run FCPX on my iMac.
    It's working in theory, but it's stopping playback even without any effect, (video frames were dropped during playback - message), i can't preview any effect, as loading preview taking for ever.
    I recently upgrade RAM from 4Gb to 16Gb 1067 Mhz DDr3, and I thought that's make a difference but not.
    I have latest Lion 10.8.1 update. FCPX ver 10.0.5.
    I try to work on 1080 video files located on main HDD , not external. they are from digital camera, 1920 x 1080, 1080p and codecs H264 linear PCM, 29.97 fps stereo.
    Any suggestion?

    You have loads of power so something is not  OK.
    Is your internal HD more than 80% full?
    For a start trash your preferences using http://www.digitalrebellion.com/prefman/
    Incidentally if you are using 50p/60p footage, that could be the problem especially on an internal HD.
    You should always transcode 50p/60p AVCHD to ProRes 422.
    Do that and I am sure you will see an improvement.
    Message was edited by: Ian R. Brown

  • Can Mac Mini run FCPX?

    Can new Mac Mini run FCPX?
    Thank you.

    HotDuckZ wrote:
    Can new Mac Mini run FCPX?
    Thank you.
    Yes, I had to purchase it on my 2010 Mini which is a media server - it only has 2GB RAM but I could buy it on this and not my 2008 Mac Pro 8 core machine with 14GB RAM!  It actually runs on the Mac Pro but as the graphics card is 'incompatible' you cannot purchase.
    I've not actually tried running it on the Mini where it was originally loaded but as Jeaux said do look at maxing out your Mini's memory.
    AC

  • Can I run 2 different updates of FCPX on the same computer?

    How can I run 2 versions of FCPX (update 10.1.1 and the original FCPX) on the same computer?
    I'm working on a team using FCPX. Recently, my computer updated FCPX to 10.1.1 (I'm assuming bc I have a newer computer & OS). The others on the team have FCPX, the earlier version.
    Because we have projects edited on both version of FCP and we need to be able to transfer projects from one computer to another, I need to be using the earlier version of FCPX. However, I also need to be able to edit the 10-15 projects we've started in 10.1.1. So, I'm looking to somehow run the 2 different versions of FCPX on a single computer.
    How could I best accomplish this - thru different users? partitioning the drive? Any suggestions??

    theconster wrote:
    WOW! Can it be that simple?
    You also want to make sure that if 10.1 sees your 10.0.9 projects and events that you don't let it update them.
    Russ

  • How can I separate FCPX projects and events on external drive?

    Hi there!
    I'm working on a Mac Pro with two drives. One drive contains the OSX and the second drive I use to store video media. I'm running FCPX 10.0.4.
    The Mac Pro is used in a teaching environment (i.e. creative suite, FCPX, iMovie, etc).
    Each tutor has their own user account for their own students (i.e. Fish account for one tutor, Mouse account for another tutor). Each user account is specially setup for the apps that that particular tutor teaches.
    With FCP7 I setup individual capture folders on the second drive for each user account. The FCP7 capture scratch for each tutor was set to a specific folder on the capture drive...i.e.
    capture/fish/final_cut_pro_documents/
    or
    capture/mouse/final_cut_pro_documents/
    The issue with FCPX is that if you capture to a second drive it saves the Events and Projects to the Root of the drive. This means that all captured/imported video footage from all of the user areas will be saved in one location and will be bunched together in the FCPX events and projects list.
    Workaround 1:
    A workaround would be to capture all footage to the OSX bootable drive so that all Events and Projects are stored in the individual user Movies folder, but I'm wary of using one drive to run the OS and High Def video footage for drive speed issues.
    Workaround 2:
    Another workaround would be to partition the capture drive into separate partitions for each tutor, but then one tutor may fill up their drive quicker than others and then I''d have to repartition the drive to allow for more space! (bearing in mind we have 17 Macs all setup in the same way!)
    Workaround 3:
    I've also tried making symbolic links from each user Movies folder to a specific location on the capture drive, but no luck. 
    Does anyone know of a workaround which might work?
    With many thanks in advance,
    Lawrence

    Hi Tom,
    Firstly, thank you for your reply.
    From your experience, can you setup Event Manager X to automatically hide all events and projects except those edited on a specific user account...for all user accounts...or is this something a new student would have to do manually before starting a new project?
    Many thanks in advance,
    Lawrence

  • IMac monitor goes to black while running FCPX

    I am running FCPX on the 27" iMac (i3) with 16GB ram.  After about an hour, the monitor (sometimes) will simply shutdown.  I can still hear the audio and the control would still work.  I am able to see the desktop via my LOGMEIN account, so I know the computer has not crashed.  After saving and shutting down the computer, it takes about 3 - 6 reboots until the monitor will turn back on.  This seems to me to be a GPU issue that is being taxed by FCP and it takes awhile for it to wake up.  I have brought the computer to Apple and the ran tests on it for the last week and could not recreate the issue.  They did not, however, use FCPX to test the video.  I am going to pick up the computer today and per their instructions reinstall FCPX.
    Has anyone else had this or heard about this type of problem?

    Hi,
    Check the monitor and cable on another PC.  Alternatively try another known good monitor and cable.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Shall I buy a new mac to run FCPX faster?

    Hi there,
    Quandry - my mid 2011 iMac does run FCPX 10.1.2, but I usually spend a second or so waiting for most things to happen - clips moved in the timeline, scrolling, etc. 10.1.1 was practically unusable - I had to use Memory Clean every few minutes - but since updating to 10.1.2 it seems at least functional, if not fluid. I work off a firewire 800 attached drive.
    Now, I'd rather not fork out for a new, 27 inch iMac, but am considering it if it makes my life faster and easier. Basically, I can get a 27 inch, Oct 12 iMac with 
8GB memory, 
1TB hard drive and NVIDIA GeForce GTX 675MX with 1GB for £1300. I'd buy another 8gb ram for it so I was operating on 16gb, but I'd love some informed opinion as to whether this is worth bothering with? I'm kind of assuming that my video card is what's holding me back on my current system, but I don't understand the interplay between this, processor and Ram sufficiently to be sure that I'm not just being a sucker for Apple's marketing. Please help!
    If anyone can help with any advice, I'd be really grateful.
    Thanks in advance!
    Ben
    21.5 inch, Mid 2011 iMac, 2.7GHz Intel Core i5, 24GB ram, AMD Radeon HD 6770M 512 MB, OSX 10.9.4

    Meersbrookben wrote:
    ... 2011 iMac does run FCPX 10.1.2, but I usually spend a second or so waiting for most things to happen - clips moved in the timeline, scrolling, etc. 10.1.1 was practically unusable ...
    hmmm...
    I used FCPX <0.6. with a 2.26/8GB Mini ... 4 sources Multicam ... flawless (ok, using Proxies... and generating those proxies took a while). And in this eras, indeed terminal/'purge' was my friend either...
    my actually set-up is a late 2012, i5/16GB Mini .. performed this stunt - 4 streams of UHD, 'live' effects - very usable, when I switch off the multi cam-preview...
    sooo - will a 2k£ investment solve your problem?
    or is it located somewhere in your workflow..-
    'brute force' is just one way to improve 'speed'...
    I'm assuming, you do NOT optimize/proxy your media? ...........

  • I have a new Windows tablet computer with limited hard drive space, and cannot transfer my itunes library to the hard drive. Can I run t media from an external hard drive? If so, how do I transfer my files?

    I have a new Windows tablet computer with limited hard drive space (32 GB), and cannot transfer my itunes library to the hard drive. Can I run itunes from an external hard drive? I have tried to follow some of the directions on this site, but am having no success. Thanks.

    iTunes will run fine with the media on an external drive.
    However, I suggest that a tablet computer with a tiny hard drive is not ideal as the primary computer for managing an iTunes library, even a small one. If you have another machine, perhaps a big, boxy, inexpensive old desktop with a decent amount of storage, that might be a better choice.
    http://support.apple.com/kb/HT1364

  • Can't Run program in Debug Mode

    To: [email protected]
    cc:
    Subject: Can't Run program in Debug Mode
    Has anyone else experienced this problem? We have written a non-express
    program that uses the Express generated services project as a supplier
    plan. However, when we try running this program in debug mode about 50%
    (or more) of the time we abend while Forte is trying to partition the
    application. Since we have many database classes in our Business Model we
    are wondering if Forte is timing out during the partition phase or if the
    server partition is running out of memory . The following error messages
    are produced by Forte. Any suggestions???
    =======================
    Error messages on client:
    =======================
    SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
    any
    of the nodes to which it has been assigned. See the remainder of the
    error
    stack for more information.
    Class: qqsp_ResourceException
    Error #: [1602, 593]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
    Last TOOL statement: method overview.StartApplication
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
    admin2.
    Class: qqsp_ErrorDescriptor
    Error #: [1602, 592]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Lost contact with remote server while trying to load
    partition
    testacadprogoffer_CL0_Part1. Check server log file for more information
    about
    the specific problem.
    Class: qqsp_ResourceException
    Error #: [1301, 102]
    Detected at: qqem_IPartitionAgent::Startup at 5
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Tue Dec 02 12:56:00
    Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
    (object name Unnamed) from partition "Forte_Executor", (partitionId =
    F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Received close: Connection aborted (10053).
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    =======================
    Log messages on server:
    =======================
    Attached to manager for node admin2.
    aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
    aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
    aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
    aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
    aud Tue Dec 2 10:47:03 : Loading partition
    EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
    owner's partition.
    aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
    aud Tue Dec 2 11:09:26 : Unloaded partition
    EvaluateApplRequirementsBO_CL0_Part1.
    aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
    aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
    FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:49:01
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
    askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
    "Forte Runtime", pid 14020 on node admin2 in environ
    ment CentralEnv.
    FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:48:57
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    ERROR: TMgr.RunThread: task cm.Recv failed terminating.
    Probably caused by a FATAL exception.
    David Wilbur email: [email protected]
    University of Windsor phone: 519-253-3000 ext. 2779
    Windsor, Ontario Canada
    -----------------------------------------------

    Hi,
    We have had the same problem in a non-express application
    with a heavy server partition. In our case, the error was not
    systematic, depending on the server workload at the time we
    tried to partition and run.
    The work-around we're using is to put the -fm flags (increasing the x
    parameter to say 30000) in the 'server arguments' of your server
    partition
    properties in the partition workshop. Note that if your server is a Unix
    platform,
    you need to put double-quotes before and after the parenthesis in the -fm
    syntax.
    Hope this helps,
    Vincent Figari
    BTW, what Forte version are you using ?
    On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
    writes:
    >
    >
    >
    >
    >
    To: [email protected]
    cc:
    Subject: Can't Run program in Debug Mode
    Has anyone else experienced this problem? We have written a
    non-express
    program that uses the Express generated services project as a supplier
    plan. However, when we try running this program in debug mode about
    50%
    (or more) of the time we abend while Forte is trying to partition the
    application. Since we have many database classes in our Business
    Model we
    are wondering if Forte is timing out during the partition phase or if
    the
    server partition is running out of memory . The following error
    messages
    are produced by Forte. Any suggestions???
    =======================
    Error messages on client:
    =======================
    SYSTEM ERROR: Unable to start the partition
    testacadprogoffer_CL0_Part1 on
    any
    of the nodes to which it has been assigned. See the remainder of
    the
    error
    stack for more information.
    Class: qqsp_ResourceException
    Error #: [1602, 593]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
    Last TOOL statement: method overview.StartApplication
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
    node
    admin2.
    Class: qqsp_ErrorDescriptor
    Error #: [1602, 592]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Lost contact with remote server while trying to load
    partition
    testacadprogoffer_CL0_Part1. Check server log file for more
    information
    about
    the specific problem.
    Class: qqsp_ResourceException
    Error #: [1301, 102]
    Detected at: qqem_IPartitionAgent::Startup at 5
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Tue Dec 02 12:56:00
    Distributed method called:
    qqrt_ForteExecAgentProxy.LoadPartition!6
    (object name Unnamed) from partition "Forte_Executor",
    (partitionId =
    F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Network partner closed connection. This usually means
    the
    process at the other end of the wire failed. Please go look there
    and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Received close: Connection aborted (10053).
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    =======================
    Log messages on server:
    =======================
    Attached to manager for node admin2.
    aud Tue Dec 2 09:34:36 : Loading partition
    testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
    aud Tue Dec 2 09:41:59 : Unloaded partition
    testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 09:49:44 : Loading partition
    testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
    aud Tue Dec 2 10:00:12 : Unloaded partition
    testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 10:18:34 : Loading partition
    testacadprogoffer_cl0_Part3
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
    aud Tue Dec 2 10:27:00 : Unloaded partition
    testacadprogoffer_cl0_Part3.
    aud Tue Dec 2 10:47:03 : Loading partition
    EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
    agent
    owner's partition.
    aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
    aud Tue Dec 2 11:09:26 : Unloaded partition
    EvaluateApplRequirementsBO_CL0_Part1.
    aud Tue Dec 2 12:36:14 : Loading partition
    testacadprogoffer_CL0_Part1
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
    aud Tue Dec 2 12:45:17 : Unloaded partition
    testacadprogoffer_CL0_Part1.
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
    FATAL ERROR: ************* Out of Memory, requested (1K) available
    (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:49:01
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
    askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
    application
    "Forte Runtime", pid 14020 on node admin2 in environ
    ment CentralEnv.
    FATAL ERROR: ************* Out of Memory, requested (1K) available
    (0K)
    Class: qqsp_ResourceException with ReasonCode:
    SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:48:57
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    ERROR: TMgr.RunThread: task cm.Recv failed terminating.
    Probably caused by a FATAL exception.
    David Wilbur email: [email protected]
    University of Windsor phone: 519-253-3000 ext. 2779
    Windsor, Ontario Canada

  • HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

    I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

    Welcome to the Apple Community.
    Enter the details of her second account at system preferences> mail, contacts & calendars.

  • How Can I Run A SQLJ Normal Project In SAP NWDS

    I have a question about SQLJ in SAP NWDS.
    1.I created a java dictionary project,and then create the table , then depoly it.it's ok.
    2.I created a java normal project including the above java dictionary project.
    3.I used the SQLJ tech in the java normal project,exporting the opensqllib.jar,sqljapi.jar,sqljc.jar,sqljimpl.jar.
    4.I coded the normal project,and export the project .jar,everything is ok.
    <b>5.But when i runed the project in NWDS,the error appeared:java.lang.NoClassDefFoundError: com/sap/sql/log/OpenSQLException
         at com.ezkj.deom.sqlj.MainApp.main(MainApp.java:21)
    Exception in thread "main"</b>
    How Can I Run A SQLJ Normal Project In SAP NWDS?
    PLS Help me and don't let me alone!

    Tony,
    Why not try to import your SQLJ project in SAP NWDS. Add all the jars mentioned to the project path both for compile time as well as runtime. Now try running he project. Once you are able to bypass java.lang.NoClassDefFoundError, you will get other errors related to SQL statements. These Oracle SQL statements needs to be converted to OpenSQL format.
    Chill out!!!
    Sukanta Rudra
    Note: If helpful, plz donate some points.

  • Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

    Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
    Thanks so much

    Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
    *[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
    *Web developer Tools > Web console
    If you post the results with out the user data, we are happy to help.

  • I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

    Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    You run Windows in Parallels or Fusion. Then in Windows you install the program.

  • The Firefox window doesn't open at all I can't run safe mode or make other trubleshot changes

    since yesterday 08/10/2011 the Firefox window doesn't open at all I can't run safe mode or make other trubleshot changes. When I click on the desktop short-cut the Firefox windows starts loading but before open is crushing.I have sent several messages to you but no answer and my Firfox is not working.

    Which version of Firefox and which OS are you using?
    There are other ways of opening safe mode given at http://kb.mozillazine.org/Safe_Mode - See if that helps.

Maybe you are looking for