Can I run Firefox 7 in a 32-bits mode with Windows 7 64-bits?

I use a lot of web based programs that will only work in a 32-bits enviroment.

Current Firefox versions on the Windows platform are only available official as 32 bit versions, so that shouldn't be a problem.

Similar Messages

  • Running in 64 bit mode with the 32 bit Oracle client installed

    I have seen many postings on this issue but none of the suggested solutions have helped me.
    I am running visual studio 2010 professional with SP1 on windows 7 64 bit machine. When I try to run a web service locally and call it with SoapUI, I get the following error message during OracleConnection.Open().
    Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
    I have tried setting up the build configuration and the project settings to target 32 bit but that has not helped. I have also tried removing the reference to System.Data.OracleClient that shows being under Program Files (x86) and add a new reference to the dll under GAC_64. That too did not work.
    I only have the 64 bit client installed on my machine.
    Any help will be appreciated.
    Thank you

    1. Visual Studio any version is 32 bit ONLY irrespective of hardware or OS bits.  So to DEVELOP with Oracle Client you MUST install 32 bit Oracle ODAC components. Task manager will show devenv.exe *32 (to confirm 32 bit Visual Studio application).
    2. You can run your web application inside IIS/IIS Express in your PC which independently can be either 32bit or 64bit.  If it is 64 bit, you MUST also install 64 bit Oracle ODAC components which means you'll have to install both 32bit and 64bit in your 64 bit Win7 running on 64bit hardware.
    3. In Visual Studio if you compile with "AnyCPU" as target, the resultant binaries (Web/NonWeb) can be both 32bit or 64bit.  So if target PC is "AnyCPU" or "x64", you MUST install Oracle ODAC 64 bit in the target OS if that target OS is 64bit.  You don't have to install 32bit ODAC in the target PC.
    4. One more catch to above scenario is the target OS could be 64bit simulated OS on a 32bit hardware. In such case you MUST install both 32bit and 64bit ODAC components.
    So while you ask your network team to download ODP.NET/ODAC Components make sure you ask them to download both 32bit and 64bit. Total nearly 600MB.
    Hope this helps many people out there.

  • This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.

    hi friends ,
    My report Fetch from the orcle database , we installed Oracle 10g and 11g - clent 32 -bit on win 2k8 -64 bit machine .while design time runing fine,but ofter depolyement im facing below issue.
    In error has occurred during report processing. (rsProcessingAborted)
    The execution failed for the shared data set 'abc'. (rsDataSetExecutionError)
    Cannot create a connection to data source ' Data source for shared dataset'. (rsErrorOpeningConnection)
    Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
    An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
      Any help is greatly appreciated, I have tried couple of solutions going through some threads online but no use and place dt tell install 1og r 11g 64-bit

    Hi,
    Based on the error message, we should confirm whether Oracle client tool has been installed on the Report Server at the beginning. If the Report Server installed is 64-bit, we should also install a 64-bit Oracle client tool on the Report Server. Besides, we
    can also try to bypass tnsnames.ora file when connecting to Oracle by specifying all the information in the data source instead of using the TNS alias to connect
    to the Oracle database. Please see the sample below:
    Data Source=(DESCRIPTION=(CID=GTU_APP)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST= server01.mydomain.com)(PORT=1521)))(CONNECT_DATA=(SID=OracleDB)(SERVER=DEDICATED)));
    Reference:http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/06/30/ora-12154-tns-could-not-resolve-the-connect-identifier-specified-error-while-creating-a-linked-server-to-oracle.aspx
    Hope this helps.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.

    Hello guys,
                Problem has been solved -
    Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
    1. If you install 64 bit oracle this is not an issue. Install 64 bit oracle.
    2. Download odp.net 32 bit  from below link:-
        ODP.NET Managed Driver Beta Download</title><meta name="Title" content="ODP.NET Managed Driver B…
    3. installed the odp.net.
    4. open the visual studio 2010.
    5.Select new - project - asp.net web application - project name -ok
    6.select tools- > connect to database- then follow the following steps
                             i>  user name - your user name/client username (example -- hr)
                             ii> password -- enter your password/client password  (example- hr)
                            iii>select connection type -- if you want to connect client database then- select EZ connect other wise select tns
                            iv>test the connection- then you will get connection succeed.
                            v> then click ok
    Thanks
    Chandrashekhar

    You do not need to do anything in VS.  You do need to configure both tnsnames.ora files, because the drivers do not share any data.
    Please see:
    http://sqlblog.com/blogs/jorg_klein/archive/2011/06/09/ssis-connect-to-oracle-on-a-64-bit-machine.aspx

  • Can I run firefox 3.0 on an eMAC with OSX 10.2.8 (jaguar)

    I downloaded firefox 3.0.19 and installed it in apps. It replaced firefox 2.0.0.20 but then would not open.Do I need to do something else. Do I need any other plugin or do I need to upgrade my operating system. If so what OSX do I need

    Firefox 3 requires at least OS X 10.4 (the same as the latest release version of Firefox - 3.6.8)
    Firefox 2.0.0.20 is the last version that runs on your OS.

  • I am running FireFox on a new HP laptop with Windows 8.1. My email program ATT yahoo.mail is constantly showing error message "Mozilla Firefox is not responding

    Only happens with the email program

    Hello,
    Sometimes antivirus extensions cause browsing issues in Firefox. Try disabling McAfee while on your email program to see if it still crashes.
    If after disabling McAfee the site still crashes, enable that plugin again if you wish. Please follow the steps below to provide us crash IDs to help us learn more about your crash.
    #Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
    #Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
    [[Image:aboutcrashesFx29|width=520]]
    <br><br>
    Thank you for your help!
    More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

  • I have Mac OSX, version 10.4.11; I loaded Firefox 4, lost 3.6.16, and now I found out I can't run Firefox 4. Can I get 3.6.16 back?

    I have Mac OSX, version 10.4.11; I loaded Firefox 4, lost 3.6.16, and now I found out I can't run Firefox 4. Can I get 3.6.16 back? I am not sure what to do. I dragged my old firefox icon to the desktop and it disappeared. The new icon has a white circle with a slash, and won't open because I have an older version Mac

    You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

  • I can not run firefox with old northern utility at same time

    I CAN NOT RUN FIREFOX WHEN MY NORTHERN UTILITY IS RUNNING AT SAME, WHEN I SHUT DOWN THE NORTHERN UTILITY THEN THE FIRE FOX WILL RUN, PLEASE TELL ME WHAT CAN I DO KEEP THEM BOTH RUNNING AT SAME TIME! THANKS !
    THE SYSTEM IS XP NOTE BOOK !

    You'll either have to modify yourself, ask the poster in that other thread for it, or use the LabVIEW driver.

  • HT4437 can i run my apple TV from an iPad2 with a PC as the iTunes server ... would like to do away with Apple TV remote ... thank you

    can i run my apple TV from an iPad2 with a PC as the iTunes server ... would like to do away with Apple TV remote ... thank you
    JJ

    As I was saying earlier that is not possible because the Apple TV has no accessible storage and streaming from your iMac is done via home sharing on your local network.
    iTunes purchases can be accessed via the cloud on Apple TV. If you have iTunes Match you can access your full music libary from the cloud.
    Using the iPad to watch your films would require syncing them and then connecting the iPad to a TV.

  • Just found out that I can't run microsoft word or adobe photo shop with Mavericks, any way to solve this?

    Just found out that I can't run microsoft word or adobe photo shop with Mavericks, is there a way to make this work?

    You must be using very old versions (Office 2004 or older, Photoshop CS2 or older).
    Upgrade to newer, or current versions.

  • In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??

    In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??

    Hi,
    I don't know of a preference, but have you used ⌘-T in iCal?
    Best wishes
    John M

  • Is it possible to run OBIEE on linux 64 bit mchine with oracle 64 bit

    Is it possible to run OBIEE 10.1.3.4.0 on linux 64 bit machine with oracle 64 bit(10.2.0.1.0) installed
    Thanks in Advance

    Yes, assuming your hardware has the supported CPUs. OBIEE binaries are 32 bits and requires 32 bits OCI libraries to connect Oracle DBs. See the OBIEE [System Requirements and Supported Platforms|http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10417.pdf] for more information.

  • Can i run apple tv off a home network with no internet just iTunes library?

    Can i Run apple Tv off a home network with no internet just itunes?

    Yes you can use home sharing with just a local network. Obviously you won't have access to all the other content.

  • Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?

    Hi,
    I have been searching the web to find out the best way/place in which to load Captivate 4 on my Windows 7 64-bit machine. Seems some people have issues with recording, others don't. I have Windows XP mode on my machine.
    My question is... what's the best way to load Captivate 4 on Windows 7 - should I install to Windows 7 and see how it goes. Or should I install under Windows XP mode?
    Thank you!
    Michele

    Yea it works in XP mode
    Daniel Wooden
    Systems
    U.S. District Court Middle District of Tennessee
    615-736-7485
    From:   RodWard <[email protected]>
    To:     DEW45 <[email protected]>
    Date:   09/24/2011 12:01 AM
    Subject:        Install Captivate 4 on Windows 7 64-bit
    machine with Windows XP mode?
    Re: Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?
    created by RodWard in Adobe Captivate - View the full discussion
    Try running Cp4 in WinXp compatibility mode on Win7.  Also make sure
    you're set to Run as Administrator.
    I run Cp4 on Win7 without issues.  But other users report similar problems
    to yourself.  In the end, it may or may not work for you because Adobe has
    never claimed Cp4 was compatible with Vista or Win7 64bit.
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/3935593#3935593]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/3935593#3935593]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Captivate by email or at Adobe Forums
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.

  • Trying to install a setup on a 64 bit machine with Windows server 2012 R2 which writes to registry FAILES

    My msi is a 32 bit setup.
    When I install it on a 32 bit machine with Windows XP it works fine .
    I tried to install it on a 64 bit machine with windows server 2008 and it succeeds
    While running my setup on a 64 bit machine with Windows server 2012 R2 it failes and I get the folloawing message:
    "Registry object reference not set to an instance of an object"
    Then the setup exits and leaves the app partially installed
    I tried searching for known problems over the net, but found nothing
    I will be happy to get some advice
    Thanks
    Liora

    Sounds like you are trying to update a registry object that is not there.
    Is this your own msi, or is it from a third party application?  If third party, check with them to see if they support it on 2012 or if they have a known workaround.
    If it is your own msi, sounds like it is time to debug it.
    .:|:.:|:. tim

Maybe you are looking for