Can i run i tunes/iphoto from an external hard drive?

does any one know if i can run ituens/iphoto from an external hard drive and if so how do i do it?

Drag the libraries to it, launch each application with the Option key held down, and point them there. The iPhoto library needs to be stored on a drive, partition, or disk image formatted as Mac OS Extended.
(85288)

Similar Messages

  • Can I run my iTunes library from an external hard drive?

    My iTunes library is too big and I need to set it up to operate from an external drive.
    How can I copy it to an external and run it out of the existing MAC?

    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.

  • Is it possible to run an operating system from an external hard drive?

    Really weird question here, but I've always wanted to know this. I have a MBP 13" mid-2012 and I installed a 256GB SSD. I currently have OSX 10.9 and Windows 8.1 installed on the drive, but is it possible to actually run an operating system from an external hard drive. I don't want to install anymore operating systems onto the internal SSD because I don't want to run out of space. So, I'm wondering can I install Linux on an external hard drive, the same way I would on an internal hard drive and just plug it in via USB 3 or Thunderbolt? Is it actually possible to use a computer this way? I know I can boot from a usb stick, so is it possible to actually use a computer with an operating system installed in an external hard drive?

    windows don't support being installed on usb mass storage installs like usb

  • Why can't I simply drag music from my external hard drive to my ipod classic?

    Why can't I simply drag music from my external hard drive to my ipod classic using my mac?

    downpat wrote:
    So after I get my music put on my computer, then moved to my ipod, do I have to delete music from itunes  to free up space?
    Not a good idea.
    What you could do, is have the Library content on the external hard drive and simply tell your iTunes programme to look on the hard drive for your music etc.. However, once you set that up, that hard drive needs to be connected and ready to read, before you start the iTunes programme. If it isn't ready, iTunes will simply go back to the default location for the music, find nothing and then you'll be back here saying that you've lost your Library.

  • Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos.

    Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos. I wanted to see if I could view them from the hard drive. Thanks

    Hello, eco1. 
    Thank you for visiting Apple Support Communities. 
    This sounds like you are wanting to move your iTunes media folder to an external drive and have iTunes this folder from this location.  If this is the case then I would recommend taking a look at the article below. 
    iTunes for Mac: Moving your iTunes Media folder
    http://support.apple.com/kb/ht1449
    Cheers,
    Jason H. 

  • Can I open an imovie project from an external hard drive on a different computer than my own? If so how?

    Can I open an imovie project from an external hard drive on a different computer other than my own? If so how?

    If you used the Finder to move the files, iMovie will have lost track of them. iMovie holds the locations of the Event files, and Project files contain references to those locations. If you move the files, iMovie has no way of knowing where they are.
    If you can, first move all the files back to their original locations. Plug in the external drive. Open iMovie and move the files in iMovie's interface (help explains how, but basically, just drag and drop in the event pane).
    Then you can connect the drive to the new computer, and iMovie will see them.

  • How can I delete items in trash from an external hard drive?

    I have a Macbook Pro and have installed Paragon so that I can use an external hard drive on both my Mac and my PC.  But some files I deleted from my external hard drive (Seagate 3TB) while on my Mac can't be deleted from the recycle bin.
    When I try to delete, the files just stay there.  When I do a secure empty, a message comes up saying the files are in use.  This has persisted for two days.  I have restarted the Mac, reconnected the drive, and also cheked the drive on my PC for errors and found none.  Of course, the files only appear in the trash when the drive is connected.  I ejected the drive properly each time, and didn't just unplug it from the Mac.
    I have tried to do a secure empty with option and/or shift keys down, but I still get a message that the files are in use.  I tried a fix involving writing a command including the term "trash" (I don't have the full command at my fingertips) in Terminal in the Utilities application, and this did not work.  There appears to be a program called "Trashit" which might help, but my computer says it will not open under my security settings because the author of the program is not listed.
    The files remaining in trash are part of an old iTunes library that I wanted fully deleted from my external hard drive and my trash.  It was a big file (over 200GB) and about 99% deleted and empltied.  Reformatting the drive should not be necessary, might not help, and would probably erase the drivers on the drive and ruin it anyway.
    I'm wondering what is happening, and how I could fix it.  Many thanks for any advice, in advance.

    I actually fixed this by plugging the drive into my PC, changing the settings to "show hidden files and folders," then finding the folder ".trashes" on the drive and deleting everything in there.  When the drive was plugged back into the Mac, the trash was empty as it should be.  (It was a very large folder I deleted, and a very small portion of the files were apparently corrupted.)  In case anyone else ever needs this fix, it works.  Good luck.

  • HT1660 Can I play movies and music from my external hard drive or do I have to re-instll them on my computer?

    Can I play my movies and music from my external hard drive or do I have to reinstall it on my computer?

    Hello B3NN13,
    If you would like to add the music from your external hard drive to iTunes without copying it to the iTunes Library on your internal hard drive, you may find the following article helpful:
    Add files to your library without adding them to your iTunes folder
    When you add an item already on your computer to your iTunes library, iTunes places a copy of the file in your iTunes folder. The original file remains in its current location.
    You can change this setting so that files are added to your iTunes library without being added to the iTunes folder. You might want to do this, for example, if you prefer to store video files on an external disk but still want to view them in iTunes.
    Choose iTunes > Preferences, and click Advanced.
    Deselect the checkbox next to “Copy files to iTunes Media folder when adding to library.”
    From now on, when you drag a file to your library or choose File > Add to Library, the item appears in iTunes, but the actual file isn’t copied or moved.
    Tip: You can temporarily reverse this setting by holding down the Option key while you drag files to the iTunes window.
    iTunes 12 for Mac: Change where your iTunes files are stored
    Sincerely,
    - Brenden

  • Can i show and play music from my external hard drive in iTunes without adding it to my Mac hard drive?

    I have more music than I can keep on my Macbook hard drive by over 200GB. I'm hoping to be able to show and play all music from my external hard drive in iTunes without having to add any of it to my Macbook Hard Drive

    Hello B3NN13,
    If you would like to add the music from your external hard drive to iTunes without copying it to the iTunes Library on your internal hard drive, you may find the following article helpful:
    Add files to your library without adding them to your iTunes folder
    When you add an item already on your computer to your iTunes library, iTunes places a copy of the file in your iTunes folder. The original file remains in its current location.
    You can change this setting so that files are added to your iTunes library without being added to the iTunes folder. You might want to do this, for example, if you prefer to store video files on an external disk but still want to view them in iTunes.
    Choose iTunes > Preferences, and click Advanced.
    Deselect the checkbox next to “Copy files to iTunes Media folder when adding to library.”
    From now on, when you drag a file to your library or choose File > Add to Library, the item appears in iTunes, but the actual file isn’t copied or moved.
    Tip: You can temporarily reverse this setting by holding down the Option key while you drag files to the iTunes window.
    iTunes 12 for Mac: Change where your iTunes files are stored
    Sincerely,
    - Brenden

  • Any suggestions for running an iTunes library from an external hard drive on two computers?

    I have two Mac computers: an iMac and a MacBook Air.  My iMac has 1TB of storage space (plenty enough for my 200+gigs of music) but my MacBook Air only has 250gigs of storage space.  I know I can access all of the music from my iMac on my MBA with HomeSharing.  But that doesn't work when I take my MBA out of the house for work.  I was going to switch over my iTunes library to an external HD but I don't know if I can access the library on the hard drive from my MBA, when the main library is on my iMac.
    Any suggestions as to how to get two different computers to access an iTunes library from an external hard drive?
    Thanks.

    I am confused as to what you had or have where and when.  The bottom line is, your library (for the standard user) is everything in the iTunes folder.  As far as iTunes' organization and display is concerned, your library is a file called "iTunes Library.itl" which points to all the other host of files and folders normally in the iTunes folder which all work together.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391
    iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847 - plus supplemental information about organizing to new structure https://discussions.apple.com/message/26404702#26404702
    Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/docs/DOC-7392 and making an iTunes library portable.
    If you kept everything together in one place then you need to put the whole iTunes folder on the drive where you want it, start iTunes while holding down the option key and guide it to that .itl file.  If things were split up and you had media on the external and the rest of the library on the internal you need to get them back to exactly where they were before.  If you can't find that iTunes folder holding the critical .itl file anywhere then you have a bunch of media tracks and no organization and will need to rebuild the organization from ground level.

  • How do run iPhoto from an external hard drive?

    I've moved my entire iPhoto library to an external hard drive and now can't remember how to open up iPhoto from that drive.

    depress and hold the option key, launch iPhoto and use the resulting select library window to point to the new location - be sure to fully test the iPhoto library in the new location before deleting the old library and be sure tha tyour backup software is backing up the external drive
    LN

  • Uploading my photos into iPhoto from an external hard drive

    I have all my old digital photos (approx 17GB) on an external hard drive. I would like to upload them in to iPhoto on my iMac (OS X 10.6.8)
    Some questions:
    How can I stop any duplicate photos being uploaded into iPhoto (I already have small number of the old photos in iPhoto)
    How do I upload the photos into 'Events'? What is the difference between Events and Albums?
    Do I need to rename the albums on the hard drive before I upload them with new album names?
    How can I delete duplicate photos I already have in iPhoto?
    and lastly the iMac is set up with 4 users accounts on it - how do I share (in iPhoto) all these newly uploaded photos with the other users
    So many questions, but If I do it right now it will save me hrs of work sorting all the photos out and renaming them all when they are in iPhoto

    and lastly the iMac is set up with 4 users accounts on it - how do I share (in iPhoto) all these newly uploaded photos with the other users
    For iPhoto 09 (version 8.0.2) and later:
    What you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
    Remember iPhoto must be running in both accounts for this to work.
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
    Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
    (You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
    In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

  • Can't back up my iPhoto 08 my external hard drive

    I have iPhoto 08 and have a USB 2 external hard drive connected to the new Airport Extreme Base Station. When I open up my photos folder and attempt to drag the iPhoto icon to my external drive on my MacBook Pro I get an error message stating that one of the photos file names is too long and can't be copied. Then my iPhoto does not back up after I hit the "okay" in the error message box (there are only two options, "cancel" and "okay".
    What is the deal and is there a workaround?
    Thanks!

    Once you've confirmed that the EHD is formatted correctly and all is well (run Disk Utility and repair the disk) try the following to create an almost "duplicate"  library on the EHD:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
    2 -  select the library you want to add from those in the selection window.
    3 - make sure that in the rebuild window the checkbox  "Scavange orphaned photos" is checked.
    4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    5 - in the next  window name the new library and select the EHD as the location where you want it to be placed. Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.

  • Can't set up an iPhoto library on external hard drive: access privileges

    Hi all
    I am trying to set up an extra iPhoto library on an external hard-drive to store some of my photos.
    I get the following message: 'iPhoto cannot create a new library in this location because you do not have enough access privileges.'
    The external hard drive is Formatted: Mac OS Extended (Journaled), is 500g capacity and is empty. Also 'Ignore ownership on this volume' is ticked.
    I am the administrator of this computer (imac) which is running Yosemite 10.10.1
    Any clues as to what I need to do to make this happen? I'm not much of a techie!
    Cheers
    Finella

    Once you've confirmed that the EHD is formatted correctly and all is well (run Disk Utility and repair the disk) try the following to create an almost "duplicate"  library on the EHD:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
    2 -  select the library you want to add from those in the selection window.
    3 - make sure that in the rebuild window the checkbox  "Scavange orphaned photos" is checked.
    4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    5 - in the next  window name the new library and select the EHD as the location where you want it to be placed. Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.

  • I can't copy iTunes media files from one external hard drive to another.

    Hi, I am running the latest iTunes and Mavericks software on my MacBook Pro. My iTunes library is stored on an external Seagate 2tb hard drive and it is almost full. I want to transfer the files to a WD Elements 3tb external hard drive and have made that new volume the destination folder for my iTunes library. However, even though I have enabled read/write on both volumes and made the iTunes media folders on both shared folders, I can't copy all the files from the Seagate drive to the WD drive. It comes up with an error message that says "The operation can't be completed because an unexpected error occurred (error code -8058)". I can transfer files from my MacBook hard drive to the new volume, but can't copy files from the old Seagate volume to my MacBook hard drive; it makes the "boing" sound that indicates it is copying but nothing transfers. Files that won't copy include all music files, some video files and all podcast files. Some transferred with no problem. Any ideas out there?

    Hi Limnos, thanks very much for your reply.
    both external drives came preformatted for Windows but I erased each and reformatted them for Mac before using them.
    i made the destination folder on the new WD drive the new iTunes folder using Advanced preferences in iTunes.
    my original iTunes folder on the first drive contained all my iTunes files, as that, also, was the destination folder that was linked via Advanced preferences.
    If I download new content now with the new drive attached, iTunes has no trouble finding where to place the files.
    in Preferences I have both boxes checked (copy files" and "organize") that deal with copying iTunes files.
    When  I first attempted to copy all iTunes files from one media folder to the other on the external drives, I just did a drag and drop of the whole iTunes media folder from one to the other while both were mounted on my desktop. It started copying immediately with no problems, but as it progressed it started skipping files, each time displaying the error message I reported earlier. that included my entire Music folder. When I open, for example, a season folder that contains files that would not copy, eg, Modern Family Season 5, the episodes that won't copy are there and visible but any attempt to drag and drop them into the correct folder on the new drive results in the error message. There is no pattern to it; it will choose some episodes from some seasons but not others, and no music at all.
    when I look at the "missing" files in  iTunes they have the small exclamation mark that indicates the file is missing, but when I locate it through iTunes it doesn't copy the file on the old external drive to the new one. It just plays it having found the file on the old drive.
    originally I had to make the iTunes folder on the old drive into a shared folder using the Get info window after either a software upgrade or an OS upgrade (I can't remember which, it was several years ago). For some reason the upgrade changed the preferences of that folder to a Read Only folder and after researching the problem found the only way to keep using the drive was to make the folder a shared one. I can't remember why and I apologise for that but it was a long time ago.; I can tell you that at the time it was necessary.
    thanks again for your time; I have a good working knowledge of iTunes and Macs in general so I truly believe I have done everything according to how it should be done,, but clearly I've done something wrong!

Maybe you are looking for

  • Unable to use "easy connect" method to XE database

    All, I have an XE database running on Oracle Enterprise Linux. If I create a tnsnames.ora entry I can connect to the server fine. However, if I try to connect via the easy connect method sqlplus user@host:port:sid it fails with Enter password: ERROR:

  • Can't install Outlook Connector - authentication problem

    Hello: We are not being able to install Outlook Connector in two PC's running Windows XP. After filling authentication data the installation program states that the information is not valid. With the same installation files and the same authenticatio

  • Scanning from Document Feeder captures only last page

    After reinstalling Acrobat 8.1 on a new computer, things worked fine for several weeks.  Now, I cannot scan a multipage document using the document feeder.  When I try, all mpages run through the document feeder (on a Brother 8640D) and Acrobat says

  • Deploying a third party API in a J2EE application.

    Hi there I have a small J2EE applicaion made up of EJBs, servlets and JSPs packaged and deployed as an EAR file in WebLogic 6.1. I'd like to make use of a third-party API (that is packaged as a JAR file) from the servlet and EJB components within the

  • Appending fields to the standard table vbak

    I have tried to add fields by the button APPEND Structure . Well it opens up a screen for creating a structure but after fillin fields when i try to activate it it gives the foll warnings :    Enhancement category for table missing    Enhancement cat