Can I run iPhoto 09 and iPhoto 11 on the same machine?

A few months ago I bought a MacBook Air, which came pre-installed with iPhoto 11. On a recent trip I tried using it to edit a lot of photos I took. This program is appalling! So many clicks to carry out edits (3:1) compared with iPhoto 09! Cropping is a nightmare on a trackpad; it's almost impossible to nail down the crop to the right size and position. The comments area is ruined; I annotate all my photos and this used to be really easy, with the comments area right next to the photo in the bottom left of the screen. Now I have to go through mouse clicks to access the comments and only two visible lines are available and then scroll bars kick in. To view the comments I now have to fiddle around trying to hover over the comments box, instead of just glancing at the corner of the screen.
Who designed this beast? Who could possibly think its editing ergonomics are an improvement over iPhoto 09? As a result, I want to install iPhoto 09 on my MacBook Air, which I'll do using by using the wireless disk function from my Mac Pro. The question is, do I have to de-install iPhoto 11 first, or can the programs sit side-by-side? I shall put the iPhoto 09 icon in my dock so I launch the right version.
I know this post contains a complaint, which is because I want to know if other users share my frustration. However, I have also sent a lengthy feedback to Apple in the hope they may simplify the editing in iPhoto 12.

Hi Jayson,
I never tried to install SAP on XP myself... only heard that someone had issues with it, and it is not officially listed in PAM.
For separated ABAP and JAVA systems, you can install them in any order.
For ABAP+JAVA, you have to install ABAP first, or both at the same time.
All installation guides are available at https://service.sap.com/instguides
Best regards,
Victor

Similar Messages

Can I run a podcast and an app at the same time?

Can I run a podcast and an app at the same time?

Yes for most. You can run a regular app with an audio podcast. I do not know what could run with a video podcast.

Can i run remote profiling and remote debugging at the same time

can i run remote profiling and remote debugging at the same time .
i am using jdev9.0.5 and oc4j9.0.4 standalone server.

i think i am wrong

How can I run two instances of apache tomcat in the same machine.

Hi
Can I run 2 instances of apache tomcat in the same machine.If yes then how.?

Yes, you can. Just run 2 instances. Make sure that they run on different ports.

Can we run 11g RAC and 12c RAC in the same server?

There is a requirement to run 11g RAC and 12C RAC in the same server for a year or so and then remove 11g RAC?
Current setup:
HP-unix 3 node RAC on 11g R2
4CPU
64 GB RAM
3 TB SAN storage
no ASM
Upgrade setup:
HP-unix 3 node RAC on 12C RAC
8CPU
128 GB RAM
6+ TB SAN storage
ASM
We are asked to use the same server and upgrade Hardware to install and run 12C RAC. What are the implications of running RAC in the same server/nodes?
Thank you for your time!

Hi,
The following table shows you the compatibility between various versions:
Clusterware
ASM
DB
Certified
12.1
12.1
12.1
Y
12.1
12.1
11.2(a)
Y
12.1
12.1
11.1(a)
Y
12.1
12.1
10.2(a)
Y
11.2
11.2(b)
11.2
Y
11.2
11.2(b)
11.1
Y
11.2
11.2(b)
10.2
Y
11.1
11.1
11.1(c)
Y
11.1
11.1
10.2
Y
11.1
11.1
10.1
Y
11.1
10.2
11.1
Y
11.1
10.2
10.2
Y
11.1
10.2
10.1
Y
11.1
10.1(d)
11.1
Y
11.1
10.1(d)
10.2
Y
11.1
10.1
10.1
Y
10.2
10.2
10.2
Y
10.2
10.2
10.1
Y
10.2
10.1(d)
10.2
Y
10.2
10.1
10.1
Y
10.1
10.1
10.1
Y
(a) Pre-12.1 database instances require an ASM instance resident on the same node as the database instance. Pre-12.1 database instances cannot leverage the implicit HA of Flex ASM.
Oracle Clusterware (CRS/GI) - ASM - Database Version Compatibility (Doc ID 337737.1)

Can I run office 2013 and Office 364 on the same computer?

My company is running Office 2013, Word, Excel, Project, Exchange and SharePoint.
I have a small business on the side and I was considering Office 365.
Is it possible to run both versions on the same machine without conflicts?
Valgardur Gudjonsson

Hi,
You can only run the click-to-run version of Office side-by-side with an earlier version of Office (say Office 2010) that is already installed on your computer.
Office 2013 MSI on a system with Office 365 (Click to Run) is NOT supported.
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Can you run both Premium and Enhanced agents on the same UCCX system?

Just that.
Thanks,
Steven

No; all seats must be of the same license level. The design guide mentions this around page 1-2 when it talks about product packaging options (i.e. Enhanced, Premium, etc).
Cisco Unified CCX deployments must have all product components and optional features of the same package type. Mixing components or options from different packages is not supported. For example, Enhanced Inbound voice option and Premium Quality Manager option are not supported.

Can I run Snow Leopard and Mountain Lion on the same iMac?

I have a late 2009 iMac with a 1tb hard drive running Snow Leopard. Can I partion the hard drive and upgrade to Mountain Lion on one part and keep Snow Leopard on the other? If not, can I partition my external back-up drive that I use for Time Machine to do the same thing?

Niel wrote:
Parallels will work with Mac OS X Server but not the client version of 10.6.8 or earlier.
(69744)
Snow Leopard client 10.6.8 (with Rosetta) running in Parallels 7 (or 8) in Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

Can I install OBIEE 11g and Database 11g on the same machine?

Hi experts
i have some confusion...
i have oracle database 11g on one of my server.
i want to install OBIEE 11g on that same machine...
i just want to be assure that will it cause any problem or conflict..
because i set ORACLE_HOMe=/home/oracle/app/oracle/product/11.2.0/dbhome_1
and i have to set ORACLE_HOME for OBIEE also....
Please let me know what how to give...and is there any other way
Thanks
Abhishek Anand

Hi Abhishek,
You can install or mount both DB and OBIEE on same machine, but check out the disk space and memory needed should be more to accomodate both.
Cheers,
KK

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

Can I run Virtual PC, and Photoshop CS on the Mac Pro?

Can I run Virtual PC, and Photoshop CS on the Mac Pro?
I would like to run VPC until the beta version of Boot Camp is improved and I can use it? Also I have to be able to use Photoshop CS.
Thanks in advance..
Mark

The "RC" version of Parallels is a Release Candidate that while not a release version it is very near.
As the name implies it is a candidate for release to the public. Many larger developers have mutliple versions of their products and will have often 1 through to about 5 release candidates from which they will select one to release as the final product.
You can find it here…
http://www.parallels.com/en/products/desktop/update/

I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted

Can oracle work in shared and dedicated mode at the same time?

Hi All,
can oracle work in shared and dedicated mode at the same time?
Thanks

A database can work only in one mode at a time.
If the database is started in Dedicated Mode then it can not run in the Shared Mode. If you need to run it in the Shared Mode, bring down the Database , change DISPATCHERS, SHARED_SERVER, SHARED_SERVER_SESSIONS parameters in initfile and bring up the database to run it in Dedicated Mode.
But there is one catch here, if you have started the database in Shared Server Mode even then you can make a Dedicated connection to server.
Thanks!
M-

How can i use both Windows and Mac os at the same time on my iMac

How can i use both Windows and Mac os at the same time on my iMac

You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both

Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both. Want to give one to wife.do I need to open a new iTunes account for her?

bashepard wrote:
Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both.
Yes, No problem at all.
Want to give one to wife.do I need to open a new iTunes account for her?
No - you can share the same iTunes account (my wife and I share the same account). But when you sync the iPads, just remember to select the correct content for her iPad and the correct content for your iPad.

Running RoboHelp 10 and RoboHelp 11 on the same system

Background
Windows 7, 64-bit operating system.
Upgraded RoboHelp 10 to RoboHelp 11 this week. Upgraded my RH10 WebHelp Proj project (released with our 2.0 application) to start editing for release with 3.0 application next June .
The upgrade did not uninstall RoboHelp 10.
I work from within Visual Studio 2010 Professional. (I know that this is not a Source Control thread, but my issues are intertwined here.)
I create WebHelp Pro (even though we are not yet publishing to RH Server, although we're working on it!).
I check the output into Release folders in Souce Control, and the build picks up the files for installation with our application.
Questions
If I need to update the 2.0 application Help, does anyone know whether I can still use RH10 to update that project? (I've posed the question to an Adobe consultant, but have not yet heard back.)
If I can't use RH10 to update the 2.0 application Help (and have to open the 2.0 project in RH11 and, therefore, upgrade it), are there new things in RH11 that could affect the WebHelp Pro output and, therefore, affect the use of the WebHelp Pro HTM files by the application? (Our release engineer believes that, for version control purposes, I must make changes to the 2.0 project in the same RH Client used to develop it.)
Thanks for any help.
Carol Levine
AIR Worldwide

Hi,Carol
First, (and to reiterate what Rick said) if you are not publishing to RoboHelp Server right now. Do NOT use WebHelp Pro. The Pro flavor is strictly for hosting on a RoboHelp Server installation.
The good news is that when and if you do decide to use RoboHelp Server, you simply take the Rh project (whether from Rh 10 or 11) and publish it with the WebHelp Pro SSL. It sounds like there is a some confusion between RoboHelp Server and Source Control. It is a common option to use RoboHelp Server and Source Control. But they are mutually exclusive. (While both may be used, they have nothing to do with one another.)
If you think about it, RoboHelp Server is output (by definition not "source")
So, you can continue using Rh 10 and 11 clients on the same computer, but as you note, you cannot open an Rh 10 project in Rh 11 because it is a one-way forward conversion (as Peter said).
As for publishing, be aware that when you move to RoboHelp Server, the publishing workflow is different. The web admin can't simply copy/paste WebHelp Pro output (from source control as you describe) to the Rh Server (or, as you said, "pick up files"). The project must be published from the RoboHelp 10/11 client directly to the Rh Server. This is because Rh Server is a database application and in order for the database to be "aware" of the new content, it must come from the RoboHelp client app (10 or 11). Also, in terms of Application Help and context sensitivity, there is a CSH API and a syntax that is used to call the Rh Server help topics from the application. This is covered in the online help. See the sub head "Access context-sensitive Help" in the Adobe RoboHelp Server 9 * RoboHelp Server Web Administrator tasks as well as Adobe RoboHelp 11 * Program Help for web pages
Thanks
John
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Can I run iPhoto 09 and iPhoto 11 on the same machine?

Similar Messages

Maybe you are looking for