Can I run Lion on a machine with the following specs?

Model Name:          iMac
  Model Identifier:          iMac4,1
  Processor Name:          Intel Core Duo
  Processor Speed:          2 GHz
  Number Of Processors:          1
  Total Number Of Cores:          2
  L2 Cache:          2 MB
  Memory:          1 GB
  Bus Speed:          667 MHz
  Boot ROM Version:          IM41.0055.B08
  SMC Version (system):          1.1f5
  Serial Number (system):          WXXXXXXXXXP
  Hardware UUID:          00000000-0000-1000-8000-0016CB92C9C3
<Message was edited by Host>

Unfortunately, to use iCloud a computer must run Lion 10.7.2 or greater. Here are the Lion requirements:
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.

Similar Messages

  • How, or can, I run Lion on this machine WQ737216Z5W

    How, or can, I run Lion on this machine WQ737216Z5W

    Your MacBook is a model 2,1 Mid 2007. It can run 10.7 Lion but not 10.8 Mountain Lion.
    http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.16-whit e-13-mid-2007-specs.html
    You will want to up your RAM to the maximum. You can put two 2gb RAM sticks in your model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
    http://en.wikipedia.org/wiki/3_GB_barrier
    http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
    OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. Your model is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
    Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • CAn I run Lion and snow leopard on the same computer with different sign-ins?

    CAn I run Lion and snow leopard on the same computer with different sign-ins?

    Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

  • I am trying to connect my fathers ipod touch to itunes on my computer, how can i sync itunes on my machine with the ipod such that his songs don't get deleted and i could add new songs to it (mp3 on my computer)

    I am trying to connect my fathers ipod touch to itunes on my computer, how can i sync itunes on my machine with the ipod such that his songs don't get deleted and i could add new songs to it (mp3 on my computer)

    You cannot merge accounts.  Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37
    One computer using multiple iTunes Store authorizations - http://support.apple.com/kb/HT1206

  • Can Tiger run a dual boot system with the two internal hard drives

    Can Mac run a dual boot system with the two internal hard drives both running Tiger?
    Dual 2.5GHz G5
    I am wanting to use one hard drive with Tiger to run my graphics stuff and then reboot and use the other hard drive for video.

    Yes, you can set that configuration up.
    (26293)

  • Can't access my ipad, comes up with the following message on screen "Ipad not backed up. this ipad hasn't been backed up. Backups happen when this ipad is plugged in, locked and connected to wifi".

    can't access my ipad, comes up with the following message on screen "Ipad not backed up. this ipad hasn't been backed up. Backups happen when this ipad is plugged in, locked and connected to wifi".

    Try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons

  • How can i run Lion, SL and Bootcamp on the same disk?

    Hi everyone,
    I have an i7 Imac with Lion preinstalled so first of all i installed windows with bootcamp
    and then for many reason i had to make a new partition with Snow Leopard using target disk mode from a mbp.
    Now the problem is that i can't see anymore my bootcamp partition at the startup disk (when i press alt after the bong).
    Even if i try to change startup disk from system preferences it says that the disk is not bootable.
    I tryed to make the bootcamp partition active using rdisk fromt he terminal with no succes :/
    I hope you guys can help me
    Thank you

    if you have two hard drives the easiest might be to install panther on the second hard drive. this way you don't have top partition anything. make sure the drive is properly formatted it should be formatted mac os extended journaled with APM partition scheme. then just boot from the Panther install disk and install panther on the second drive. note that this will only work if your mac originally came with panther. did it?
    to switch between installs you can change the startup disk in system preferences->startup disk. then reboot. alternatively, reboot normally and hold option at the chime. this will boot you into startup disk manager where you can choose which drive to boot from.

  • Can I use an external Drum Machine with the drum sounds in Express?

    New to Logic Express and Midi. Can I create drum track patterns and whole songs using an external drum machine and the drum sounds in Logic Express? I'm sure I can, but I have no clue as to how. Can anyone point me in the right direction?

    shanec805, wttdaWelcome to the discussion area!
    Remember that Time Capsule is a hardware device.
    Time Machine is a software feature of OS X 10.5.5.

  • Novice wanting to teach myself to create movie theater ad with the following specs...

    Help.... What CS6 programs do I use for this?  Any advice and suggestion to links would be greatly appreciated. I have the CS6 suite but am a novice and want to teach myself how to do this.
    Thank you in advance!
    The source video image must be composed for wide-screen.
    CONTENT RESOLUTION:  720p - 1280W x 720H (NTSC)
    PIXEL GEOMETRY:  Square
    COLOR:  24-bit RGB
    FRAME RATE:  NTSC, 29.97 fps
    BIT RATE: 20,000 - 30,000 Kbits/sec
    SCAN TYPE:  Progressive
    LENGTH:  15 seconds increments
    FINAL FORMAT:  MOV ONLY use H.264 (BEST) Codec. Call with any questions.
    NOT ACCEPTED:  JPG, PDF, PowerPoint, Word, Publisher (Most Microsoft software).
    http://www.adsonthewall.com/production.html

    Basic vid work starts with the NLE or "non-linear editor" (too long to explain the name!) such as Premiere Pro. That's where you set up your timeline and do the basic chopping/blending of bits into the greater whole.
    If your footage is the same as your needed output, great ... but if you're going into a specific output frame-size like this you might need to set your sequence settings BEFORE adding footage. Use the above list and only worry about frame-rate (the 29.97) and frame size/ratio of 1280x720 first.
    Depending on how involved you need to get, you might use Speedgrade for "grading", the modification of the look of the footage ... color, contrast, gamma, all that ... and perhaps need to add graphics or "lower thirds" in After Effects. Both the later are complex programs in their own rights.
    I checked out that link ... those ads are fairly complex bits of work. Some of the ones were mostly or all created with "stills", still-camera images placed on the timeline for set periods of time. Somewhat easier in some ways to work with for this as a starter as you can fit them to any crop you need. Others were a mix of stills and moving footage so those do take some care in what the original footage was shot at compared to what the requirements are you'll need to output it as. I think this would be MUCH easier to do on a timeline set for that frame-size to begin with, and conform any non-conforming footage to that on import to the project.
    Next ... wow ... the graphics for these are pretty nice, and keyed for moving, transparency over vid below ... that sort of thing. That will take a few questions here or over on the AfterEffects forum I'm thinking. That could easily be the hardest part of this job. While some level of graphics can be made within PrPro, Ae is really much better for that sort of thing. And those are well past my experience ...
    Neil

  • I have a iMac with 3Gb of memory can I run Lion

    Can I run lion or will it take up all the memory I use lightroom and photoshop CS4

    To see what processor you have, do "About this Mac" from your Apple menu and see what the processor like says. Looks like this on a PowerPC Mac:
    If it says "PowerPC" as in the image, and your processor's speed is shown as 867mHz or greater, the highest Mac OS you can run is 10.5.8 Leopard.

  • I am on an iMac6,1 and on OS 10.5.8 and I want to upgrade the OS. Can I load Lion on my machine, and how do I go about doing it.. I have everything backed up.

    I am on an iMac6,1 and on OS 10.5.8 and I want to upgrade the OS. Can I load Lion on my machine, and how do I go about doing it.. I have everything backed up.

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    OS 10.6 Snow Leopard is once again available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
    To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
    http://support.apple.com/kb/HT4759
    You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/

  • Can we run oracle Forms 5 Application with 10G in Client/Server?

    Hi All,
    Can we run oracle Forms 5 Application with 10G in Client/Server
    Mode?
    Regards
    Gaurav

    In theory you can run it 2 tier - which means that you have the client (the machine the user is sitting at) being the same machine in which the forms application server is running. So yes. But specifically, we don't support a client server runtime anymore. 6i was the last version.
    With 10g you will be running through a browser.
    Regards
    grant

  • I have a white Macbook 2009 on OSX Lion. It came with the OSX Snow Leopard CD, I erased the HDD and am trying to install the OSX from disc but am getting "cannot install OSX from disc" message. What can I do?

    I have a white Macbook 2009 on OSX Lion. It came with the OSX Snow Leopard CD, I erased the HDD and am trying to install the OSX from disc but am getting "cannot install OSX from disc" message. What can I do?
    I got the macbook from a friend a few years ago and it already had OSX Lion installed. Whenever it boots from the Snow Leopard disc it says it cannot install from disc. Is there anythingI can do or should I take it to an Apple store to get them to boot OSX Lion for me?

    Insert your Snow Leopard disc and restart, press and hold the C key as soon as you hearthe startup chime, hold C until you see the Apple Logo. When your computer starts up you'll be at the first install screen, choose your language and click the arrow to go to the next screen. This screen has a menu bar, from the Utilities menu select Disk Utility, select your hard drive, this is the one with the manufacturers name or numbers, click the partition tab and then delete any existing partitions by selecting them and clicking the minus. In the drop down box select one partition and click apply. Name your hard drive and click erase. When it's done quit DU and go back to the installer, install Snow Leopard. When the installer is done and the computer is back up and running run Software Update to get to 10.6.8

  • Can i run lion on my macbook 4.1?

    Can i run lion on my macbook 4.1?

    Lion General requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space

  • Can I run Lion on on a Intel Core Duo computer?

    Can I run Lion on on a Intel Core Duo computer?
    I have on of the Intel Core Duo  macbook.
    I hope on othe apple people can answer that for me.

    This is my Macbook and I seem to be able to run a depleted Lion operating system on it
    no full screen on some applications. no response to multi swipe actions, No Air Drop. and so on and so on. Also when it loaded it stalled with no real information and i had to go to reload Lion which then instigated further download of 6 minutes to load a slightly amended copy of Lion. thought i had lost all my info but it did all reappear
    It does have Launchpad and Mission Control but i seem to have lost my Isight camera in Photo booth and Skype. this has happened occasionaly before and a reboot brings it back for a while.
    Ah well Is it time to up grade the laptop?? Do i need a laptop?? Anyway ill keep this one for a bit and see how it goes at least some of the changes work.
    Model Name:          MacBook
      Model Identifier:          MacBook3,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.2 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          4 MB
      Memory:          2 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          MB31.008E.B02
      SMC Version (system):          1.24f3
      Serial Number (system):          W8***4
      Hardware UUID:          B618B269-D4FC-5A1D-BE2E-E8B2383FEEA4
      Sudden Motion Sensor:
      State:          Enabled
    <Edited by Host>

Maybe you are looking for

  • LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3

    Hello , I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3. My universe is working fine with LOVs but when i run the webi report , the LOVs arent working. have

  • I wanted to downgrade my phone from iOS 4.0.2 to 3.1.3

    can someone tell if there is an official way from apple to downgrade iOS 4 to iOS 3.1.3, if not why ?. I am not really happy with the performance of my 3GS iphone since I have upgraded to iOS 4, apple has replaced my phone with new one, optus has rep

  • ADF page times out for long running backend procedure

    Dear gurus, I have an ADF 10g web page that invokes a long running backend PL/SQL procedure. After some time, and while the web page awaits for the completion of the PL/SQL procedure, I get an *'Oops! This page appears broken'* from my browser (eithe

  • How to add application

    Hallo every body ! Old Lady here and my first message. My grandson give me his old iBook and iPod Touch but he not very nice. He tell me to figure myselves. So I make new Apple account to find out how to put application I buy from iTunes store to my

  • Which exchange profile to use

    Hi experts, I have two exchange profiles. One on the XI server and one on the SLD. Do I need to maintain both or just one? Thanks!