Can I run Logic 9 with 32 bit support alongside Logic X on the same Mavericks computer?

Hello friends,
I am upgrading from Snow Leopard and Logic 8 to Mavericks and Logic X. It's my understanding that Logic 8 doesn't play nice with Mavericks, but I heard that the latest version of Logic 9 does. I never used Logic 9 before, but it is my understanding that you could run Logic 9 in 32-bit mode and it should be compatible with all Logic 8 projects. Is this true on Mavericks? I am on the verge of setting up multiple partitions, one for Logic 8 on 10.6 and the other for Logic X on 10.9, but if I could launch logic 9 with 32 bit support on mavericks when I needed access to my 32 bit reliant projects, that would certainly be better!
Would both versions of Logic work on the same system together in the way that as I hope? Obviously, I wouldn't need them both open at the same time, but I didn't know if one would work correctly after installing the other, etc.
Thanks very much! Upgrading can be a hassle with consideration to legacy projects! This would just be one step for me; it's a whole other question as to whether or not I could get the fxpansion vst wrapper working in Logic 9 on mavericks (surprisingly, it seemed to work with Logic 8 on mavericks, but the black curtain of Logic 8 almost makes it unusable).
Thanks very much!

Thanks everyone! I was afraid that I was going to have as much trouble as I did migrating from Logic 4 to Logic 7 (yeesh, what a mess that was).
Blueberry, are you warning about literally running both Logic 8 and Logic X simultaneously? Because I don't imagine I would do that. Could their be adverse consequences of merely having both installed?
It is my hope that I can gracefully migrate away from Logic 8/9 altogether, but the OCD in me needs to have adequate access to legacy projects in a pinch.
Thanks again!

Similar Messages

I run Firefox with at least twenty tabs open at the same time. Version 23 (and later versions) load the tabs MUCH more slowly (2 mins rather than 15 secs). HELP

I run Firefox with at least twenty tabs open at the same time. All versions of Firefox newer than version 22 ) load the tabs MUCH more slowly ( approx 2 mins rather than merely 15 secs). HELP!!

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Also check your security software.
You can use the Network tab (the one at the right in the menu) in the Web Console (Firefox/Tools > Web Developer;Ctrl+Shift+K) to check the server response (left-click an entry) see if that is the problem (reload via Ctrl+F5 to bypass the cache).
*https://developer.mozilla.org/en/Tools/Web_Console

The Adobe License agreement - can I run one Mac version and one PC version on the same license?

can I run one Mac version and one PC version on the same license?

I'm specifically looking at Lightroom. Looks like I will be able to run both platforms... Now to figure out a goo file managment system if I'm editing photos on both systems.
I travel with a PC laptop (can't afford a MAC yet) so I will do some editing on the road for posts to facebook etc. and the heavy editing on the IMAC when we get back from holiday.
Thanks for your help.

When I use a projector via a VGA adapter I can not run my Bluetooth speaker or other Bluetooth devices at the same time. Can anyone help me with this?

I try to find help. I can not run a projector and a Bluetooth device at the same time. Even though my Bluetooth speaker is recognized, and I have changed the settings to this speaker, it wont play any sound. I have got also problems using other Bluetooth devices when I use the projector via a VGA adapter.

I try to find help. I can not run a projector and a Bluetooth device at the same time. Even though my Bluetooth speaker is recognized, and I have changed the settings to this speaker, it wont play any sound. I have got also problems using other Bluetooth devices when I use the projector via a VGA adapter.

Can I run CS6 on Desktop and CS5 on Laptop at the same time?

First off, let me start by saying I am a small business owner. I am at work between 10 to 16 hours per day, every day. I have very little time in my life that I am not sitting at my main desktop macintosh, unless I am sleeping.
All of my my work files are on my desktop computer in CS5. I plan to keep using CS5 for all working files for now. I only purchased CS6 to backsave.
But I want to LEARN CS6, and slowly work into it before I make a sudden, or dramatic, change.
I want to do turtorials and go through the CS6 learning curve on my laptop. It sits peacfully at my side, all day every day. Any downtime I can be playing, learning and experimenting. Without fear of doing any damage to my CS5 files or my main production mac.
If I try to run CS5 on the desktop and CS6 on the laptop, at the same time -- will they CALL HOME, STOP, FREEZE, LOCK UP, or and send me, in any form, to ADOBE JAIL or ABUSE CENTER?
Does anyone have an answer for this?

Thank you both -- you have made my entire day. I thought I could, but was worried that something terrible would happen. Which I am worried about to begin with. It will be great to be able to learn all of the componets of the full Desging and Web upgrade, at my own pace, in my down time.
Truly appreciate your time and your replies

Can i run UDP client and UDP server socket program in the same pc ?

hi all.
when i execute my UDP client socket program and UDP server socket program in the same pc ,
It's will shown the error msg :
"Address already in use: Cannot bind"
but if i run UDP client socket program in the remote pc and UDP server socket program run in local pc , it's will success.
anybody know what's going on ?
any help will be appreciated !

bobby92 wrote:
i have use a specified port for UDP server side , and for client define the server port "DatagramSocket clientSocket= new DatagramSocket(Server_PORT);"Why? The port you provide here is not the target port. It's the local port you listen on. That's only necessary when you want other hosts to connect to you (i.e. when you're acting as a server).
The server should be using that constructor, the client should not be specifying a port.
so when i start the udp server code to listen in local pc , then when i start UDP client code in local pc ,i will get the error "Address already in use: Cannot bind"Because your client tries to bind to the same port that the server already bound to.

[SOLVED]Can I run a 64 bit operating system?

I want to know if I can run a 64 bit operating system on my laptop. the lshw command says I have a 64 bit processor, so does that mean I can run a 64 bit O.S. because almost everything else says 32 bit. So, does all my hardware have to be 64 bit, or is it only the processor that matters? I have looked on the internet and it always seems to relate only to the processor, so I don't know if the other stuff matters. My laptop came with 32 bit vista, if that matters. Sorry if this is a stupid question. Thanks.
Last edited by Tux the penguin (2010-11-23 20:01:40)

Thanks for the quick reply. Sorry. I should have been more clear. By everything else I meant for example:
*-pci:1
description: PCI bridge
product: MCP79 PCI Express Bridge
vendor: nVidia Corporation
physical id: 10
bus info: pci@0000:00:10.0
version: b1
width: 32 bits
clock: 33MHz
capabilities: pci pm msi normal_decode bus_master cap_list
resources: ioport:d000(size=4096) memory:faf00000-fbffffff ioport:e0000000(size=402653184)
-storage
description: SATA controller
product: MCP79 AHCI Controller
vendor: nVidia Corporation
physical id: b
bus info: pci@0000:00:0b.0
logical name: scsi0
logical name: scsi1
version: b1
width: 32 bits
clock: 66MHz
capabilities: storage pm msi ahci_1.0 bus_master cap_list emulated
configuration: driver=ahci latency=0 maxlatency=1 mingnt=3
resources: irq:42 ioport:c000(size=8) ioport:bc00(size=4) ioport:b880(size=8) ioport:b800(size=4) ioport:b480(size=16) memory:fae72000-fae73fff
*-multimedia
description: Audio device
product: MCP79 High Definition Audio
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: b1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:21 memory:fae78000-fae7bfff
*-network
description: Ethernet interface
product: MCP79 Ethernet
vendor: nVidia Corporation
physical id: a
bus info: pci@0000:00:0a.0
logical name: eth0
version: b1
serial: 00:24:21:6d:a4:82
capacity: 1Gbit/s
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII
resources: irq:20 memory:fae7d000-fae7dfff ioport:c080(size=8) memory:fae7e800-fae7e8ff memory:fae7e400-fae7e40f
description: Notebook
product: CR600 (To Be Filled By O.E.M.)
vendor: Micro-Star International
version: Ver 1.000
serial: System Serial Number
width: 32 bits
capabilities: smbios-2.6 dmi-2.6 smp-1.4 smp
configuration: boot=normal chassis=notebook cpus=2 family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009
Processor details-
*-cpu:0
description: CPU
product: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 6.7.10
serial: 0001-067A-0000-0000-0000-0000
slot: CPU 1
size: 2GHz
capacity: 2GHz
width: 64 bits
clock: 200MHz
capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm
configuration: cores=2 enabledcores=2 id=1 threads=2
So, I could still run a 64 bit OS, even though most of the hardware is 32 bit?
Last edited by Tux the penguin (2010-11-23 02:57:18)

Can't run iTunes, Apple Application Support program missing.

Can't run iTunes, Apple Application Support program missing. It's a brand new computer, never had iTunes installed. I've attempted 16 installs, each time uninstalling the previous install and verifying no Apple software installed before trying again; I've also been using different browsers, still no luck. Windows 7, 64 bit.

Try downloading 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). AAS might not install right now, but you may get a more useful error message as to why not, or it might install once the other components have been installed.
tt2

I keep getting message "This page requires a plugin that can only run in 32 bit mode" what does this mean and how can I fix it?

I keep getting message "This page requires a plugin that can only run in 32 bit mode" what does this mean and how can I fix it? It seems to come up randomly, but I'm fairly ignorant.

Previous versions of Firefox were only 32 bit, Firefox 4 for the Mac contains 32 and 64 bit versions. If you want to always start Firefox in 32 bit mode, open up Finder and go to the Applications folder. Control-click the Firefox app and click "Get Info", then select the "Open in 32-bit mode" option.

How can I run MP350 with Windows 8.1 computer? Works OK with Windows 7 machine. Need drivers.

How can I run MP350 with Windows 8.1 computer?
It works OK with Windows 7 machine, using drivers from original CD.
Windows 8,1 machine doesn't find those drivers (which I copied to its C drive).
It doesn't find needed drivers on the internet.

Hi Larry-R,
I see that you made a later post regarding this. Please refer to the answer on that post regarding your inquiry.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can Macbook pro 2012 with GT650M support 3d vision via bootcamp

can Macbook pro 2012 with GT650M support 3dvision via bootcamp
For sure GT650 is 3d vision supported, but anyone ever made test that you
can watch 3d movie via windows under bootcamp on new macbook pro
Thanks..

After updating NVidia driver newer than 267.76,
I got black screen after Windows Logo shown during reboot.
After countless annoying tests,
I installed the newest NVidia 285.79 driver without problem finally.
My original prefered display configuration:
link the primary monitor with HDMI port
I already followed the GeForce Driver Installation Guide, step by step,
http://forums.nvidia.com/index.php?showtopic=169555
but there's still black screen after reboot.
THEN, I TRIED TO USE mini-DISPLAY PORT INSTEAD AND REBOOT AGAIN,
video signal was connected to my DELL 2707W(only DVI port)
by MiniDP to HDMI adapter/HDMI-DVI cable.
The display is NORMAL NOW !!
Root Cause assumption:
Maybe the driver newer than 267.76 always regard miniDP as primary signal output port,
even if you set the HDMI port as primary.
I think this is a serious bug, but no solution after mote than 30 driver updating.
The following configuration worked on my Mac mini 2010 system:
mini─miniDP to HDMI adapter─
HDMI cable to HDMI splitter─┬HDMI-DVI cable─Dell 2707
                                              └HDMI cable─ 3D projector
but I found that the configuration can't play 3D video...
So I changed the configuration to:
Mac─miniDP to HDMI adapter─HDMI-DVI cable─Dell 2707
      └HDMI cable─ 3D projector
For your reference.

Can I run Rosetta with Yosemite?

Can I run Rosetta with Yosemite?

Rod LoScalzo wrote:
So I can run Adobe's Creative Suite 2 and some other programs that will not run on Yosemite.
YES: if you unable or unwilling to upgrade your Adobe Creative Suite 2 to a version that will run in Yosemite, for about $99, you can make Version 2 run in Yosemite by installing Snow Leopard Server (and Rosetta) into Parallels in Yosemite. Here is Adobe CS2 Photoshop running in this way:
[click on image to enlarge]
More information here:
http://forums.macrumors.com/showthread.php?t=1365439
Installing Snow Leopard Server into Parallels for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

Error message says "This page requires a plugin that can only run in 32-bit mode"

When I try to write an email from my BT site I get the following message
"This page requires a plugin that can only run in 32-bit mode"
Then there's a link to restart the page in 32-bit mode. However, it resets to whole page, drags things back out the trash.
I have only had this problem since updating to the latest Firefox

Previous versions of Firefox were only 32 bit, Firefox 4 for the Mac contains 32 and 64 bit versions. If you want to always start Firefox in 32 bit mode, open up Finder and go to the Applications folder. Control-click the Firefox app and click "Get Info", then select the "Open in 32-bit mode" option.

TS1538 I have an iPod Touch IOS 4.2.1 that Windows 7 home premium can't see. Says there's a driver problem. My other one with IOS 5.1.1 works on the same cable and computer. I don't know where to go.

I have an iPod Touch with 4.2.1 that won't connect to my Windows 7 Home Premium laptop. It gives a "USB Device Not Recognized" error when I plug it in to a USB port. My wife's (newer) iPod Touch with IOS 5.1.1 works just fine with no errors. I'm using the same port - I just moved the cable from one iPod to the other. I've tried the various different drivers using Update Drivers. I let it search the internet and it says "The best driver software is already installed", but the device shows as "Unknown Device". I did the browse my computer, unchecked the "Show compatible hardware", and selected Apple, Inc.. There were two Apple iPod USB Drivers. One was 6.0.9999.53 and the other was 6.0.9999.61. Neither of these works. I'm thinking that the maybe I need to upgrade the iPod touch software version - but I don't know how to get to it. Can this be loaded over WiFi? Any other ideas?

Does the iPod work OK?
Does it charge when connect to the computer?
Does it appear in My Computer?
Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
http://support.apple.com/kb/HT1353#iPod_touch_late2009
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
I would try to find a copy of Final Cut Express perhaps.
Does this answer your question?

Can I run Logic 9 with 32 bit support alongside Logic X on the same Mavericks computer?

Similar Messages

Maybe you are looking for