Can I run my 23" Cinema Display from a Windows PC? What adapters would I need and graphics card if any?

I need to buy a Windows PC Notebook and want to make sure there are adapters or if necessary video cards for it to run my 23" Apple Cinema Display.
(I'd prefer not having to get a separate monitor for the pc windows only jobs).
If anyone else does this, how does it work out for you? Any tips?

OOPs all. I looked at the other posts and see my answer.
Thanks anyway.

Similar Messages

  • HT1998 Why can't I uninstall AirPort 4.2 from my Windows 7 PC..  I downloading and reinstalling the 4.2 but during the installation process I get an error.  It reads...    "1608: Unable to Create InstallDriver instance Return Code -2147024894

    Why can't I uninstall AirPort 4.2 from my Windows 7 PC..  I tried downloading and reinstalling the 4.2 but during the installation process I get an error.  It reads...    "1608: Unable to Create InstallDriver instance Return Code -2147024894

    You should not install it again..
    Boot the computer into safe mode and try the uninstall again.
    No luck you will have to manually uninstall which is a pain. Delete the files and open regedit and delete the registry entries.. better still use the system restore to go back to a previous system where you had no 4.2 installed..
    Or just ignore it and install the latest 5.6.1 and if it gives trouble well do a clean install of windows.

  • MBP3.1 can't run 30-inch cinema display

    I used my 30-inch Cinema Display on a G5 for quite awhile, but had to switch to my MacBook Pro when key apps like FC Pro required an Intel Mac. Since running it on my MBP 2.2 (Model A1226, introduced in 2007)/4 GB Ram/upgraded to 500GB drive I've had on-going problems with screen flickering, freezes and automatic rebooting.
    I've had  Apple replace the graphic display and the mother board twice, and the problem continues. Apple claims that the MBP can drive the display, but it doesn't look as if they're right. My laptop has none of the problems when disconnected from the display.
    Has anyone else had this problem?

    You don't say what connection adaptor you are using. See this Apple support post to see if it applies to you. http://support.apple.com/kb/HT3571

  • Want to run two 30" cinema displays from Mac Pro

    I'm running Avid Media Composer software to edit a film that I made, and I would like to run (if possible) two Apple 30" cinema displays next to each other off of my Mac Pro (the computer was purchased at end of 2009). While editing with Avid software, I like to spread out my work and bins in able to see everything, and strange as it may sound, I'd like more room than one 30" display can provide. Currently, I have one Apple 30" Cinema display in use, and could purchase another large display if I can find out-- definitively, if my Mac Pro computer will be able to handle it and power it effectively. I realize that Apple doesn't sell the 30" displays anymore, but I saw a few relatively inexpensive ones available on Craigslist recently.
    The second monitor that I'm using now is a much older (non-Mac) monitor (and smaller) and the resolutions don't match the high resolution of my single Apple 30" display. So, my reason for wanting a second, larger display are twofold... 1) to see more of my work, and 2) to get the highest resolutions to match (2560x).
    The ports on the back of the Mac Pro don't look like they will support the use of a second 30" display, just one. Does anyone have any suggestions?
    Do I need to purchase another video card to run a second 30" Apple display? If so, which ones are best/do you suggest?
    Do I need to upgrade my processing speed (get a faster processor) to run two large, high-rez monitors?
    specs:
    Mac Pro
    10.6.6
    Processor: 2 x 2.8 GHz
    Memory: 2 GB
    800 MHz DDRZ FB-DIMM
    Quad-Core Intel Xem
    Purchased end of 2009

    If it has two DVI ports, just plug in the second display with an additional Dual-Link DVI cable -- the card can run both displays without issue.
    If it has one DVI and one other type, Exactly which display card do you have installed?

  • HT4413 To transfer everything from my Mac mini to a new Mac Pro do I need two displays? Once I have confirmed my mini is open while pressing T can I then disconnect my Cinema Display from the mini and connect it to the Pro to continue the transfer?

    Can I set up my Mac mini to transfer its contents to a new Mac Pro and then disconnect my Cinema Display and use it connected to the Pro to complete the transfer?  Do I actually need two displays to manage the transfer?

    It helps have 2 monitors, so that you can monitor data XFER, just my experience. If nothing else it allows you keep am eye on what is going on.

  • How to drive a 30" Cinema Display from a new 27" iMac?

    How do I drive a 30" Cinema Display from a new 27" iMac that has no obvious video out port? There are lots of ports, but nothing resembling or identified as a video out port. Is the very small hole in the cabinet by the power in port the thing I'm looking for? If so, the power/video adapter for the Cinema will not work as is. Do I need a Mini DisplayPort to VGA Adapter? I am completely uncertain about this, and could use solid advice. The AppleCare tech I spoke with today seemed not to have a clue. He said he would get back with me on this. He didn't.

    Overview
    Every Mac with a Mini DisplayPort allows you to connect an external display or projector using an adapter. You can use an external display as your main workspace or to extend your desktop, or you can work in mirrored mode with a projector so you can view what your audience sees.
    Use the Mini DisplayPort to Dual-Link DVI Adapter to connect your Mac to a 30-inch display that includes a DVI connector, such as the 30-inch Apple Cinema Display HD, and enjoy the ultimate widescreen canvas with a resolution of 2560 by 1600 pixels.
    Compatible only with Mac computers with Mini DisplayPort and Mac OS X v10.5.6 or later.

  • What are the video card requirements for running a 23" cinema display

    What are the video card requirements for running a 22" cinema display(clear acrylic case) w/ a PC? My motherbaord is AGP. Thanks to anyone who can help.
    Intel P4 3.0ghz   Windows XP  

    Hi Lionel,
    As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
    I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
    A good place to start looking for answers is:
    http://cubeowner.com/kbase_2/
    Cheers!
    Karl

  • How can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I have ask this question in the local shop but they could not answer me - how can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
    Thanks.

  • Can I connect a 27" Cinema Display to an ageing iMac? I have a Mini-DVI to DVI Adapter fronting a Kanex C247DL to complete the MIni-DVI to mini display port. Sound is good but screen is black.

    Can I connect a 27" Cinema Display to an ageing iMac? I have a Mini-DVI to DVI Adapter fronting a Kanex C247DL to complete the MIni-DVI to mini display link. Sound is good but screen is black.

    Hey phil staton, highland,
    Thanks for using Apple Support Communities.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Have a nice day,
    Mario

  • HT5219 How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

    How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

    You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
    Hope this helps.

  • How Can I Run a SQL Loader Job from Schedular

    How Can I Run a SQL Loader Job from Schedular , So that It Runs every Day.

    Depends on a couple of factors.
    If you are on a UNIX platform, you can create a shell script and schedule it with cron.
    If you are on a Windows platform, you can create a batch file and schedule it with the Windows scheduler.
    Or, if you are on Oracle 9i or 10g, you could use the external table feature instead of SQL*Loader. Then you could write a stored procedure to process the external table and schedule it using the Oracle scheduler (DBMS_JOB). This would probably be my preference.

  • Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer.  I've tried to start from the disk, and before I can even run a repair off utilities, it happens again.  What's up?

    When I started my iMac today, it started beeping like an alarm horn.  I shut it down, and held the startup button a little longer to get it to start.  Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer.  I've tried to start from the disk, and before I can even run a repair off utilities, it happens again.  What's up?  Am I screwed?  HELP!!

    What you are seeing is a kernel panic, often but not always connected with a hardware or peripheral issue, so, unplug everything except mouse and  keyboard, reboot and hold the shift key as soon as your hear the chime, continue holding it until you see the Apple Icon and spinning progress indicator, then post back.
    It will take noticeably longer than normal to start.

  • How can i buy again the same software from the same mac? (where it is installed and runs ok: it is for licences issues)

    How can i buy again the same software from the same mac? (where it is installed and runs ok: it is for licences issues)
    Thanks for your help.

    Hi ..
    You can redownload previously purchased apps from the App Store using the same Apple ID on all your authorized Macs for free.
    How to re download apps from the Mac App Store:
    Open the App Store. From the menu bar click Store > Sign In
    Click Purchases from the top of the App Store window.
    Select which apps you want to re download. Then right or control click where you see Installed  then click Install.
    Make sure and use the same Apple ID used for the original purchase.

  • TS1363 I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed.  Any suggestions?

    I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed.  Any suggestions?

    everytime I try to open the store it endlessly says "accessing iTunes store" but it never opens.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Can you still get 22" Cinema Display back light fixed?

    Can you still get 22" Cinema Display back light fixed?

    Did you think of googling for "apple 23" cinema display power adapter" and see what turns up?

Maybe you are looking for