Can i run my printer with ethernet and wireless simultaneously?

HP OfficeJet 6700
Mac OS and Windows XP
I am trying to print to this printer wirelessly while it is connected to an ethernet network. Is that possible? We want to be able to print company reports from the Point of Sales system (hence the ethernet) but we also want to be able to print documents and emails from our laptops (wirelessly).
One of us has a Dell laptop running Windows XP, the other has a MacBook Pro.
Thanks!

Hi,
You can use LAN cable to connect your printer to a wireless router and use the printer wirelessly in your home network.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Why can't the 6700 support both ethernet and wireless simultaneously?

I have two desktop computers connected to my wirless router/cable modem via ethernet and two laptops that connect via wireless. Can I configure my new 6700 to accept both?

Hi,
Any consumer product support either Ethernet or Wireless connection, the connections cannot be used simultanly..
However connecting the pritner to your network (either by Ethernet or Wireless) will allow installing the printer on ANY pc connected to the same network, either by Wireless opr Ethernet connection..
Once the printer connected to your network, simply install the CD on any of your computers...
hope that clarifies,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to configure use of Ethernet and wireless simultaneously, with different Windows´s?

Hello friends,
My network has two Win XP-laptops connected via ethernet to a Dovado-router, and from the Dovado-router another ethernet cable to a Win 7 PC.
The Win 7 PC connects to the internet via a D-Link wireless network to my ISP wireless router Huawei E589.
Problem: the PC refuses to work with both ethernet and wireless at the same time.
I use the ethernet for tranferring vast amounts of graphical data (astronomy photographs at 3-4 GB each), and I can only access the internet through the wireless. Neither XP nor 7 wizards are able to fix it. Both networks were visable in Network Center,
now only the wireless is available. Ethernet is gone.
What do I do, to make it work?

Hi,
What's your purpose? My understanding is that you want Windows 7 PC wireless use internet and wired use Lan. If I am misunderstand please point me fault.
For the situation you can do like this:
1) Setting for your both routers.
Make sure both routers have different Router IP's and SUBNETS, you should try to set the subnet of Dovado-router to 255.255.255.252(this router should be used as local Lan, not connect to internet).
Set the subnet of D-link to 255.255.255.0
2) Setting For the LAN adapter.
Under the TCP/IP properties(Lan adapter), please assign a unique IP address (which coincides with the subnet of Dovado-router ), set the subnet to 255.255.255.252 (or whatever you set it to Dovado-router). The very important things is that
don't assign any GATEWAY to Lan adapter, leave it blank.
3) Setting For the WIRELESS adapter.
Under TCP/IP properties(wireless adapter), please assign a unique IP address (that coincides with the wireless router), set the subnet to 255.255.255.0 (or whatever the default is for the wireless router), and make sure to type gateway IP address ( D-link
IP address).
Now you can test if they are work normally.
Hope this helps.
Regards.
Spencer
TechNet Community Support

Can't run the webcam with MAX and LV12

Hi,
I would like to configure and run a webcam via Measurement & Automation Explorer and Labview 2012.
I am working in windows 7 Ultimate (64bits).
Labview: 2012 (32bits) V 12.0f3
MAX: V5.3.3f2
Vision Acquisition Software: 2011
I installed Labview 2012 without issue. Then i installed Vision Acquisition Sofware 2011 to have the library neccesary for the webcam. But, before the end of the installation. I got this error screen ( see bellow Windows_Firewall_Might_Be_Enabled.jpeg): WARNING: Windows Firewall Might Be Enabled. So, i tried to turn OFF, turn ON my Windows Firewall. I have still had the same error screen even if I tried to reinstall Vision.
Any ideas about this issue?
Then I ran Measurement & Automation Explorer, go to Devices and Interfaces and NI-IMAQdx Devices. I can see my webcam ( Logitech HD Webcam C270). Double click on it. And i have the first error screen :cwimaq Errors loading control. The default settings for the control will be used. Then this error message: cwimaq Error creating default control. And i have a Unexpected Error (see picture bellow). I tried couple times to restart the computer. But It is still the same issue. So, I really don't know why it is doing that. Any ideas?
And when I run Labview and try to go in propreties of Vision Acquisition Express: Labview displayed : Unable to view properties.So I can't use my webcam with Labview for the moment. Furthermore, I downloaded ni_imaq_usb_installer_86 to get the good library for the usb.
Thanks for helping me,
Best regards,
Francois
Attachments:
Error_webcam_Labview.7z ‏235 KB

I found this topic http://digital.ni.com/public.nsf/allkb/244E6DDF9A92A6CD8625730100629047
Application
Programming
Interface (API)
Vision Development Module Version
5.0
6.0
6.1
7.0
7.1
8.0
8.2
8.2.1
8.5
8.6
2009
2010
2011
2012
LabVIEW
2012
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
So, I am thinking this is probably my issue. Because I installed Labview 2012 but my VDM is 2011.
Anybody has already installed VDM 2011 on Labview 2012, and it is or not working?
Regards,
Francois

Sharing printer with wired and wireless computers

I am sure there's a topic about this somewhere, but I can't seem to find a clear answer. I have a PowerMac G4 that does not have wireless capabilites. I have a PowerBook G4 that does, and an Airport Express that makes everything possible. Last night I went to hook my laser printer up to the Airport Express. Everything went smoothly, but now I cannot print from my PowerMac. Is there a way that I can set this all up so both computers can use the printer without having to buy an Airport card for the PowerMac?
Right now the printer is connected to the Airport Express which is connected to my router. The PowerMac is also connected to the router.
Sorry that I am so clueless about this. Networking baffles me.

Go to Airport Admin and uncheck "Distribute IP Addresses." With both a router and an Airport Express, you have created two separate networks - turning off part of that brings it back to one. (You may need to restart the Macs)

Can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

Hi, Alan -
How can I connect to both printer (HP 4050n, via direct connection) and internet (via LAN), as my iMac has only one R45 port?
You can, but you'll need to expand your cabling a bit.
You'll need to get an intermediate ethernet hub, switch, or router. That device sits alone, with the Mac, your printer, and your modem/LAN plugged into it.
If you are already using a router, either separate or in combination with the modem (many modems have a built-in router), then you just need a hub or switch.
I use an ethernet switch (10/100/1000) to let both my Macs (a 2010 iMac and an elderly G4 DA model) use my HP4000n printer and my modem. The ethernet switch is a passive device, meaning there's no setup nor instructing it required - it's truly plug-and-play. All four items (two Macs, printer, and modem) are plugged into it via ethernet; both Macs have full-time independent access to the printer and the modem.

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
I would try to find a copy of Final Cut Express perhaps.
Does this answer your question?

Can I run 2 monitor with one of the monitor having Full Screen for Elgato Eye TV?

My mac mini has Elgato 'Eye TV' software that runs in 'Full Screen'. I want to keep this setting & also connect another monitor to the macmini & use other Appilications on the other monitor? Can I run 2 monitor with one of the monitor having Full Screen for Elgato Eye TV?
My early 2009 macmini can run Mac OS 10.5, 10.6, 10.7 & 10.8

Yes, run one from HDMI and the other from Thunderbolt/minidisplayport sockets. In EyeTV Preferences check the screen you want for full screen use and make sure your Dock is on the other one.

I purchased an ipad for my husband in 12/2011 - it was stolen last night and i can't find the receipt with insurance and warranty

I purchased an ipad for my husband in 12/2011 - it was stolen last night and i can't find the receipt with insurance and warranty.

The warraty doesn't cover lost or stolen.
If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipadhttp://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.phphttp://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.htmlhttp://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-numberhttp://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

My time capsule connotes only with ethernet and not wireless why?

my time capsule connotes only with ethernet and not wireless why?

Firstly, try a factory reset. This can often iron out problems like this.
Also, what generation is your TC? What version of AirPort Utility are you using?

Can I run iCloud on my iPhone and older MobileMe account on my iMac?

Can I run iCloud on my iPhone and older MobileMe account on my iMac?

iPhone - should be all right. Mac with 10.6.8 - no - 10.7.2 is required for iCloud. If you migrate from MobileMe but don't have 10.7.2 you will lose access to email, and calendar, contacts and bookmarks syncing: Keychain and other data syncing will stop. You will be able to access email, calendar and contacts on the iCloud website at http://icloud.com provided you have been able to complete the migration successfully. You will no longer be able to access these facilities on MobileMe after you have migrated, though the iDisk, Gallery and website hosting will continue until next June.
You can access your email by entering the server settings manually into the Mail application or other email client. Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point.

Can you run microsoft office with mavericks

can you run microsoft office with mavericks?

Yes if its the Microsoft office for Mac version
Check the Microsoft packaging
http://www.microsoft.com/uk/mac/products
and
http://store.apple.com/us/browse/guide/windows
see thread
https://discussions.apple.com/thread/5480447

Can I use HP Pro 8600 with usb and wireless at the same time

Can I use HP Pro 8600 with usb and wireless at the same time? Sometimes I cannot get the wireless to work, it seems to be my laptop. It would be nice if I could use the usb, but it doesn't work. What should / can I do, if anything?
Sam

Hi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Pdf files print with horizontal and vertical lines

All of a sudden, today, when I print pdf files, they print with horizontal and vertical lines. I thaught it was the computer or printer. So I printed from another computer on the network, and printed to a different printer with the same result. It is not just that one pdf file either, I have tried multiple files. HELP. Does anyone have any ideas?

It is not clear how you are creating the files. It appears that they were created by Distiller from PS files that were created in some way. I also noted that you are using AA8.1.0. You may want to try to update (do all the updates in order) as a possible fix. It may be in the creation process also. Several packages will split large graphics into parts and create the image. I think this is a characteristic of OFFICE 2007 (docx) files - but I am not sure yet. Tell us how you created the files - step by step, including the scan.
If you have the original documents, why not simply print to the Adobe PDF printer. The result would be smaller and a lot cleaner.

Can not take a screenshot with Maverick and track pad. can not use apple chat to talk with a tech. there are other issues also like I used to be able to go back a page with the delete button. No Maverick PDF to instruct on how to use Maverick

Can not take a screenshot with Maverick and track pad. can not use apple chat to talk with a tech. there are other issues also like I used to be able to go back a page with the delete button. No Maverick PDF to instruct on how to use Maverick
THE use of the apple support is a mess also.
I want to be able to use my MAC fully and easily like I used to with Snow Leopard.
What is wrong with this maverick OS?

The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

Can i run my printer with ethernet and wireless simultaneously?

Similar Messages

Maybe you are looking for