Can I run OAS in 64bit Windows 2008?

I'm going to install the OAS in our 64bit Windows 2008 for evaluation, however, both the x86 and win64 file cannot be installed.
The following message is prompted when we attempt to install the win64 version:
The version of this file is not compatible with the version of Windows you're running.  Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
And the following message is prompted inside a DOS prompt when we attempt to install the x86 version:
Checking operation system version: must be 5.0, 5.1 or 5.2 .   Actual 6.0    Failed <<<<
Existing Oracle Universal Installer, log for this session can be found at C:\.......
We can only install the OAS in a Windows XP workstation, does it mean that we have to use a Windows XP workstation as production server?
May I know if there has any OAS download for 64bit Windows Server 2008?

Not exactlly. Maybe it's certified now, but still cannot install.
According to the update:
1. Windows 2008 is supported with patchset 10.1.3.4 or higher. Before applying the 10.1.3.4 patchset, customers must first install the base 10.1.3.x products using the following patches:
. 10.1.3.1.0 SOA requires patch 6712338 (http://updates.oracle.com/download/6712338.html)
. 10.1.3.2.0 WebCenter requires patch 6971010 (http://updates.oracle.com/download/6971010.html)
. 10.1.3.x Companion CD requires patch 7129052 (http://updates.oracle.com/download/7129052.html)
. 10.1.3.x Companion CD ASG Install requires patch 7129469 (http://updates.oracle.com/download/7129469.html)
. 10.1.3.x Companion CD Failsafe Install requires patch 7191497 (http://updates.oracle.com/download/7191497.html)
Additional notes for Windows 2008:
. The patches listed above apply to both 32 and 64 bit versions of Windows 2008.
. Please review the release notes on http://download.oracle.com/docs/cd/E12524_01/relnotes.1013/e12523/install.htm#sthref7 for the 10.1.3.4 patch set for known issues for Windows 2008.
But....
1. 10.1.3.4 still not avaialble for direct download, you have to download 10.1.3.x then apply the patch. But the download of 10.1.3.x cannot be installed, how can we apply the patch?
2. You cannot download the patch without Metalink account (maybe, it's not for evaluation at this moment)
So, it still have to wait until the full package of 10.1.3.4 or above is available for direct download.

Similar Messages

  • Can't run batch file in Windows 2008 R2

    Trying to run batch file (manually first) with powershell commands.
    Powershell commands work fine thru powershell but the batch file will not execute manually.
    I am trying to run as administrator.
    Is there a permission  or policy I may be missing?
    Thanks
    Dave
    Dave Kozlowski

    Hi,
    Some bat type command can't run in the powershell environment, you must confirm you have choiced the correct lunch tools.
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SBO Crystal Report 2008 Add-on on 64bit Windows 2008 Server

    Dear Friend,
    Do you have any experience on installing SBO Crystal Report 2008 Add-on with SAP B1 2007 B on 64bit Windows 2008 Server (SBS)? Could you please explain the exact reason for the following error on installation of the add-on on its final stage?
    Retrieving the COM class factory for component with CLSID {3E...} failed due to the the following error: 80040154

    [crystal report integration for SAP Business One|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/707f51b3-0b20-2b10-8daa-d8ee72ace309 [original link is broken]] version v2.0.0.7
    [Run time Download|https://smpdl.sap-ag.de/~sapidp/012002523100009351352008E/crruntime_120_mlb.msi]
    Thanks
    Krish

  • ODBC 10gR2 64bit Windows 2008 EE (64bits) to to sql server 2005 (32bits)

    Hi all, I am having trouble with creating an ODBC connection from 10gR2 64bits Windows 2008 to sql server 2005 Win 2003 32 bits
    1. I create a listener.ora like the following the port 1521 is for oracle DB and the 1522 is for sql server
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
    (PROGRAM = extproc)
    SID_LIST_HSODBC_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = hsodbc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
    (PROGRAM = hsodbc)
    HSODBC_LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    2. my tnsnames.ora looks like
    PRUEBA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = local host)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = prueba)
    HSODBC =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
    (CONNECT_DATA=(SID=HSODBC))
    (HS=OK)
    3. I created an inithsodbc.ora like this
    HS_FDS_CONNECT_INFO = hsodbc
    HS_FDS_TRACE_LEVEL = 0
    4. I have configure also the dns system and tested succesfully.
    5. My database link look likes
    CREATE public DATABASE LINK "hsodbc"
    CONNECT TO "sysdba" IDENTIFIED BY "masterkey" USING 'hsodbc';
    6. When I run my select I get the following error
    select * from dual@hsodbc
    ERROR at line 1:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    Unable to retrieve text of NETWORK/NCR message 65535
    ORA-02063: preceding 2 lines from HSODBC
    7. I look and the listener_hsodbc log
    14-APR-2011 08:14:49 * (CONNECT_DATA=(SID=HSODBC)(CID=(PROGRAM=)(HOST=DOMAINSERVER\SERVER_PRO)(USER=Administrator))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51749)) * establish * HSODBC * 12518
    TNS-12518: TNS:listener could not hand off client connection
    TNS-12560: TNS:protocol adapter error
    TNS-00530: Protocol adapter error
    64-bit Windows Error: 2: No such file or directory

    Ok I follow the note 1086365.1 How to Setup DG4MSQL (Database Gateway for MS SQL Server) on a 64bit Windows
    1. Modify my listener it looks like this
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = dg4msql)
    (ORACLE_HOME = C:\oraGtw11g\product\11.2.0\tg_1)
    (PROGRAM = dg4msql)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    ADR_BASE_LISTENER = C:\oraGtw11g\product\11.2.0\tg_1
    LISTENER_D4GMSQL =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1511))
    ADR_BASE_LISTENER_D4GMSQL = C:\oraGtw11g\product\11.2.0\tg_1
    2. modify the tnsnames.ora
    dg4msql =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1511))
    (CONNECT_DATA=(SID=dg4msql))
    (HS=OK)
    3. modify the initdg4msql.ora file
    HS_FDS_CONNECT_INFO=bsaleslogix,1433//FPDB
    HS_FDS_TRACE_LEVEL=OFF
    HS_FDS_RECOVERY_ACCOUNT=RECOVER
    HS_FDS_RECOVERY_PWD=RECOVER
    Then I reload de listener and test via tnsping dg4msql, this test turn ok, also test via tnsping the conection to the database is ok
    4. create the db link
    CREATE DATABASE LINK sqlserver
    CONNECT TO "sy" IDENTIFIED BY "mas" USING 'dg4msql';
    5 . when i execute the select
    SELECT * FROM DUAL@SQLSERVER
    ERROR at line 1:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    Unable to retrieve text of NETWORK/NCR message 65535
    ORA-02063: preceding 2 lines from SQLSERVER
    6. the listener_dg4msl shows an TNS-12505 error while conecting to the SID

  • HT3053 Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?

    Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?
    My battery got swollen (and I unfortunately noticed it very late and might have be running with it for months, which potentially explains all the crashes everyday and the trackpad not working anymore, the Apple test also says I have a bar of ram broken...) and I had to remove it because the back pannel did not close anymore... Can I still use my MBP normally forever that way? I was planning on buying a new mac anyway but maybe waiting for the next iMac upgrade in the year... Should I wait?

    Other than the system shutting down instantly if you have a power outage, whcih could corrupt the OS. Nothing else bad will happen.

  • I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

    I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

    montana girl wrote:
    I purchased a MacBook AIr Nov. 2011 11" and current OS X 10.7.5.  I read that I needed to update to Snow Leopard before I can update to Maverick, ...
    Whatever you read was incorrect. You can upgrade directly to Mavericks. It is in the App Store and is free.
    Snow Leopard predates the operating system you already have. That's the reason it will not install on your MacBook Air. You spent $20 needlessly for it, but it's yours to resell if you wish.

  • Oracle obdc driver 32-bit doesn't run on 64-bit windows 2008 server r2

    Does anyone know a way to run OBDC driver on windows 2008 server r2?, a way to run the app?

    Pl post in the Heterogeneous Connectivity forum (Heterogeneous Connectivity as this forum is meant for issues related to database installs
    HTH
    Srini

  • Function sequence error. in 64bit Windows 2008 Server.

    Hi All,
    Pardon me if the posting is not in the correct group.
    I am migrating my application from 32bit(Windows 2003 Server) to 64bit (Windows 2008 Server R2).
    I am getting the following while trying to execute a SQL command
    Encountered ODBC error -1: S1010, 0, [Microsoft][ODBC Driver Manager] Function sequence error .
    Basically internal function call is SQLExecute() function call. This works perfectly for Windows 2003 Server 32bit. I tried the command execute at the background from the command prompt and it is working.
    I checked the squence of call.We have two consecutive SQLBindParameter function call and then we call SQLExecute. Is this sequence incorrect in case of 64bit? I also checked the return code given by SQLExecute which is 99.
    Any help or suggestion would be very much appreciated.
    Thanks,
    -R

    Hi Teun,
    Yes i have build the addon & installer with x86. I am using Interop.SAPbouiCOM.dll ,  Interop.SAPbouiCOM.dll, System.dll , System.XML.dll.
    I have not specified the relative path in code as such but iam loading my forms Load batch action i don't know if it ok in this scenario or not.
    Building the Solution/Project is Successful without any warning.
    While debugging it on my server it gives the same error "Object Reference Not Set to an Instance of an Object".
    Debug Out put last errors are as follows:
    A first chance exception of type 'System.IndexOutOfRangeException' occurred in mscorlib.dll
    'TAMPA800.exe': Loaded 'C:\Windows\SysWOW64\sxs.dll'
    First-chance exception at 0x76afe124 in TAMPA800.exe: Microsoft C++ exception: EEMessageException at memory location 0x0036ecec..
    A first chance exception of type 'System.IO.FileNotFoundException' occurred in TAMPA800.exe
    A first chance exception of type 'System.NullReferenceException' occurred in TAMPA800.exe
    The thread 'Win32 Thread' (0x460) has exited with code 0 (0x0).
    The thread 'Win32 Thread' (0xdb8) has exited with code 0 (0x0).
    The thread 'Win32 Thread' (0xfdc) has exited with code 0 (0x0).
    The thread 'Win32 Thread' (0xfb4) has exited with code 0 (0x0).
    The thread 'Win32 Thread' (0xdc8) has exited with code 0 (0x0).
    The thread 'Win32 Thread' (0xe04) has exited with code 0 (0x0).
    The program '[3872] TAMPA800.exe: Managed' has exited with code 0 (0x0).
    The program '[3872] TAMPA800.exe: Native' has exited with code 0 (0x0).
    Regards
    John

  • Help me!! I can't run photoshop cs6 in windows 8

    Help me!! I can't run photoshop cs6 in windows 8

    Could be due to classes not being found or wrong version of java...

  • Can we run java programms on Windows XP?

    Hi experts..
    I installed JDK on Microsoft Windows XP Home Edition..but i am unable to run java programmes.
    can i run java programmes on Windows XP?? if so how??
    i will be very thankful..if any one solve this problem..

    Yes, you can. There's a bunch of things you need to do (mostly setting the path environment variable). You should look at the documentation that came with the JDK, and check out the many forum responses to problems in setting up the JDK on Win 2K and Win XP.
    HTH

  • Can i run microsoft office for mac 2008 or 2011 on my imac G5 2GHz power pc (3.0)  ??

    can i run microsoft office for mac 2008 or 2011 on my imac g5?
    i have the os x leopard version 10.5.1 cd ...i dont know if i want to install it
    what should i do?

    You can run Office 2008 but not 2011.
    (62245)

  • HT1238 I can't run iPod utility for Windows in my Windows 8 . does this apps support windows 8 ?

    I can't run iPod utility for Windows in my Windows 8 . does this apps support windows 8 ?

    Welcome to Apple Support Communities
    iPod Utility for Windows hasn't been updated for a long time, so it's probably not supported in Windows 8. Have you tried to run it in compatibility mode?

  • Can't install oracle 10g on windows 2008 R2

    Please help me
    I want install oracle 10g on windows 2008 R2 but can't install because I don't have file install oracle_10.2.0.4 and i can't download file from oracle.com
    and oracle 11g i not license
    Where can download file oracle install 10.2.0.4
    thank you

    user9357585 wrote:
    same issue here. I need 10.2.0.3.0 with install software to bring a legacy sid over onto new server hardware that will not support Win 2003. I have Win 2008 32bit loaded and just need the software install ruitine to make the move. My legacy 10g server running on older hardware and Win 2003 works, but is now uncompliant with IA requirements now. We are sandboxing this application. My new server will need to have 2008 on it.
    Will Oracle supply me the software. I have paid maintenace on my account every year. Just paid it for this year in Ocober. Should not have an issue here.submit a Service Request & you'll get your question answered

  • I run Dev 6i on Windows 2008 R2 64-bit,the forms are working fine after connection to the database but the reports continue to request for username, password and database connection string every time i try to open a report.

    I receive REP-0501: Unable to connect to specified database. I run developer 6i application on windows 2008 r2. I have applied the nn60.dll and nnb60.dll files to the \BIN directory. The forms are working fine. The reports will only display after the correct user id (username, password and database connection string) is supplied. This is happening to all attempts to open already complied form. Pls, help.

    If you are connecting to an Oracle 11g database, remember that by default the passwords are case sensitive. To disable that, run
    ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE;

  • Can I run Quickbooks Contractor for Windows on my Macbook Pro with Bootcamp ?

    Can I easily run Quickbooks Contractor for Windows in my Macbook Pro and exchange QB data files with my accountant ?

    You can run any Windows program once you install Windows on your computer using either Boot Camp assistant or a VM like Fusion, Parallels, or VirtualBox.

Maybe you are looking for