Can I run OSX 10.1.x on my OSX 10.8.2 iMac?

Greetings,
I have a 4 year old iMac running OSX 10.8.2. I recently purchased a Nikon film scanner (discontinued 3 - 4 years ago) that has bundled software compatible with OSX 10.1.x and Windows XP. I know that it is possible to load WIndows XP on my mac if I use Parallels or possibly a virtual machine software package. But is it also possible to run OSX 10.1.x on my 10.8.2 mac? If so, how would I do it? Does Apple still sell OSX 10.1.x? I'd prefer to avoid installing WIndows on my mac if I can avoid doing so. If you know I can't do this, please tell me and I'll get on with the Microsoft solution.
Thanks,
BCB

To the best of my knowledge, Nikon has no drivers for their film scanners compatible with any recent version of Mac OS X, much less OS X 10.8, and never will now.. You have a couple of possible options:
VueScan from Hamrick Software: http://www.hamrick.com
SilverFast from LaserSoft: http://www.silverfast.com/show/scanners-nikon/en.html
Neither are free and SilverFast is not cheap, but it's probably the most professional. Both will support Mountain Lion.
Regards.

Similar Messages

Can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

Hi, Alan -
How can I connect to both printer (HP 4050n, via direct connection) and internet (via LAN), as my iMac has only one R45 port?
You can, but you'll need to expand your cabling a bit.
You'll need to get an intermediate ethernet hub, switch, or router. That device sits alone, with the Mac, your printer, and your modem/LAN plugged into it.
If you are already using a router, either separate or in combination with the modem (many modems have a built-in router), then you just need a hub or switch.
I use an ethernet switch (10/100/1000) to let both my Macs (a 2010 iMac and an elderly G4 DA model) use my HP4000n printer and my modem. The ethernet switch is a passive device, meaning there's no setup nor instructing it required - it's truly plug-and-play. All four items (two Macs, printer, and modem) are plugged into it via ethernet; both Macs have full-time independent access to the printer and the modem.

Can I run iCloud on my iPhone and older MobileMe account on my iMac?

Can I run iCloud on my iPhone and older MobileMe account on my iMac?

iPhone - should be all right. Mac with 10.6.8 - no - 10.7.2 is required for iCloud. If you migrate from MobileMe but don't have 10.7.2 you will lose access to email, and calendar, contacts and bookmarks syncing: Keychain and other data syncing will stop. You will be able to access email, calendar and contacts on the iCloud website at http://icloud.com provided you have been able to complete the migration successfully. You will no longer be able to access these facilities on MobileMe after you have migrated, though the iDisk, Gallery and website hosting will continue until next June.
You can access your email by entering the server settings manually into the Mail application or other email client. Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point.

I have a MacBook Pro 5,5 2.26 Ghz 2GB memory . Can I run OSX 10.7 . I am on 10.6.8 and am told software is up to date?

I would like to be able to run OSX 7 on my wife's MacBook Pro , as I have a new printer which required OSX7 or above.
Her Macbook Pro is Model MacBook Pro 5,5 2,26GHz speed and 2GB memory.
When I look for software updates I get the message that software is up to date.
Is it possible to run OSX7 on this Macbook Pro , and if so , how do I get it.
Many thanks , Sam

Open the Mac App Store and download Yosemite, or if you don't want to upgrade all the way immediately, click here and order a download code for Lion 10.7; codes for Mountain Lion are also available.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(116492)

Can't import TV show from Itunes to 4th gen nano-running OSX 10.5 with Imac

This message has also been posted to the general use forum of the 4th gen nano forum.
Bought my daughter a 4th gen nano for Christmas. Also purchased a TV show from Itunes some time back.
This TV show has been in Itunes for months, and is on my 5th gen Ipod and plays fine, but will not import to the 4th gen nano.
Here is what I have done so far:
1.Plugged the nano into the computer, highlighted nano, clicked TV show tab, clicked the TV show we wanted to sync, then clicked the sync button.
2.I downloaded a sample movie into Itunes from the apple support site, and it won't import into the nano.
3.After researching, I downloaded and reinstalled Itunes and Quicktime both.
Nothing seems to be working.
Funny thing is, there was one music video that imported from Itunes to the nan when I first registered and set it up, and it plays fine.
Does anyone have any suggestions?
Thanks.

My 13 yr. old daughter solved this problem, and successfully imported the TV show to her Ipod.
She tells me she has no idea how she did it, she just did it.
So, although I guess my problem is solved, I'd still love to know what the answer is.
Later

Can I run Leopard OS X v10.5.8 on a Power Mac G5 (2004)?

I am wanting to upgrade to CS5 but I see more and more people are having problems with Snow Leopard not running on the Power Mac G5 because of it not having an Intel Processor. Mine does have the Dual 2 GHz Processor is it able to run the new CS5 on Leopard OS X v10.5.8? Please advise and thank you for your help.

Adobe CS5 requires an Intel Mac.
That Intel Mac can be running OSX 10.5.8 and still run CS5, but it has to be an Intel machine.
The good news is that even today's Mac Mini is likely a more powerful machine than the biggest G5 available (not just the faster CPU, but every single one of the sub-system components is significantly improved). And the cost of a new machine isn't so bad, in the context of what Adobe charges for their apps. Your best bet would be to start scouting around for a new machine that would be ready for CS5.5 when it starts shipping next month.

Can't install OSX 10.7 Lion on old Mac Pro...

i've got an old mac pro... i think it is 2007 or 2008 vintage... it is the 2.66mghzzz model...
it is so old it can't run OSx 10.8 and up... so I am stuck running 10.7xxx
anyway, system disk died recently...
made an OSX 10.7 install thingy on a 8gb USB drive using my new Macbook Pro...
problem is the install keeps hanging after starting the install... i've attached screenshots showing how far it gets...
i've let it sit for a few hours and no progress... i reckon it should normally finish installing of a USB stick in maybe 30 minutes or so?
is it possible that the 4tb SSHD drive i am installing onto is too big for this machine?
it has been using other 4tb drives so not sure this is an issue?
really stuck here... argh...
thanks

thanks for your reply...
yes, I realize it will only install on older macs... my Mac Pro is the 1,1 model... the 2.66mhz processor is from the 2006-2008 era....
i believe it shipped with 10.4 or 10.5 OSX...
it was previously running 10.7.5 which is the newest OSX that was allowed to be installed on it....
so it should allow 10.7 to be installed? Or do I have to start with the much older osx?
I downloaded Lion 10.7 from the mac app store and it of course wouldn't let me install it on anything, even the 4tb SSHD drive when I connected it via USB/SATA adapter to macbook pro as it is too old for running 10.7 install on this machine but I was apple to use SuperDuper app to make a boot drive of the 10.7 download form the mac app store onto a 8gb USB flash drive and make it bootable...
The 4tb SSHD drive appears to work on system as I can run disk utility and format it and mount it etc etc...
Perhaps there is something wrong with my install USB flash drive I made? I am really stuck here...
thanks for your help...

How can i install osx now ?

I clean my disk totally by disk utility and now nothing comes up when holding option key. After a while this text comes with a black background, "No Bootable Device -- insert boot disk and press any key".
I think I erase everything, even boot settings!!!
Now, How can i install OSX now on my iMac?

What is the exact iMac model you have, please? If your model can run Snow Leopard then you need to install Snow Leopard from your installer discs. Snow Leopard must then be upgraded to 10.6.8 so you can upgrade to the version of OS X you had installed from the App Store.

I have a late 2012 iMac running osx 10.8.5. I keep losing access to my internal hard drive. I can reboot and regain access and it will last for a few minutes or hours. Disk utility does not seems to help.

I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive. I keep losing access to the internal hard drive/startup disk.
I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive. The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal. Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing). It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

You run Windows in Parallels or Fusion. Then in Windows you install the program.

Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files.

Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files. Says "the Following disk images couldn't be opened". and then say's there "isn't enough disk space" I'm pretty sure it has something to do with apps that are not approved by the app store. How can I turn it off?

Select your hard drive in the Finder and choose File -> Get Info. What is the available space?

I have an IMAC and I'm running OSX 10.9.2. I'd like to store my Aperture /IMovie Libraries to an external hard drive. In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the externa

I have an IMAC and I'm running OSX 10.9.2. I'd like to store my Aperture /IMovie Libraries on an external hard drive. In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives. Is this possible? Can I set up a RAID 5 format for redundancy?

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

As of 2 months ago, I cannot fully access Facebook using either Safari or Firefox browsers. I have a Mac G5 running OSX 10.5.8, Safari 5.0.6 and Firefox 3.6.28. Does anyone have any sugesstions on how I can resolve this?

As of 2 months ago, I cannot fully access Facebook using either Safari or Firefox browsers. I have a Mac G5 running OSX 10.5.8, Safari 5.0.6 and Firefox 3.6.28. Does anyone have any suggestions on how I can resolve this?

Aha, a PPC Mac!
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a later version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html

Can't seem to sync my iphone 4 running ios 7 with itunes 10.6 running on a mac running osx 10.5.8 What can I do to fix this?

can't seem to sync my iphone 4 running ios 7 with itunes 10.6 running on a mac running osx 10.5.8 What can I do to fix this? Is there an itunes update? or How can I return to the previous ios?

To sync an iOS 7 device you need to be running iTunes 11.1.1; iTunes 10.6 is way too old and won't work. You need to install iTunes 11.1.1, but to do that you need to be running at least Mac OS X 10.6.8.
So you need to do the following:
1. Upgrade your Mac to at least OS X 10.6.8 (later preferably, but 10.6.8 at the miniumum).
a. Check first to see if your model Mac can be upgraded, check that it has enough RAM and so forth (2GB at the least, more if possible).
b. If you can't upgrade your Mac, or don't want to, then you will have to buy a new Mac with the latest version of OS X (currently 10.8.5, soon to become 10.9) and iTunes 11.1.1
2. Install iTunes 11.1.1 on your newly upgraded Mac.
3. Sync your iOS 7 iPhone with iTunes.

TS1362 I have a Mac Pro tower, am running osx and iTunes will not work.. It basically just stopped working after having run faultlessly for...years... I can see all the songs, playlists etc, but the progress bar will not progress..it's 'stuck'. Suggestion

I have a Mac Pro tower am running OSX and iTunes will not work. It has always worked flawlessly. I can see all my iTunes content- my playlists, my songs et cetera, But I cannot play anything. The progress bar is 'stuck'...any suggestions?

Thanks. I have been using iTunes since its inception and have never had a problem...I'm using the latest version. The progress bar is the bar that moves when you're playing a song..it just won't start when I double click on a song,..have tried quitting, rebooting etc but nothing works. Apple are useless-they have told me twice they've tried to call me 'momentarily', but I've been waiting by the phone, and they definitely have not tried to call...

Can I run OSX 10.1.x on my OSX 10.8.2 iMac?

Similar Messages

Maybe you are looking for