Can i run snow leopard on my brand new iMac i5?

I just bought a new iMac Core i5 – and it's lovely – but it comes with Lion pre-installed and half my applications no longer run (Logic Express, Photoshop, etc). Can I install Leopard or Snow Leopard to continue to use my old apps, or will I have to upgrade everything?

Hi:
Partitioning an internal HD is not a very good idea (IMHO). At a minimum you waste resources and also partially defeat OS X's system management.
You might wish to consider running one OS X from an external HD - although that would confuse me for sure
Barry
P.S. I only had one thing that would not run (permanently) under OS X 10.7. That was an old copy of Office (2004). I decided to not upgrade but to switch to iWork instead.

Similar Messages

I can't install Snow Leopard on a brand new hard drive with a brand new optical drive.

I need help please. I have a 2009 MacBook Pro. The hard drive crashed a while back so I bought a new one. The original Snow Leopard disc that came with it was scratched so I bought a new one of it as well. After trying/failing to install Snow Leopard on the new hard drive about a dozen times I bought a new optical drive as well. I installed the new optical drive today, tried to install Snow Leopard again and STILL got the same installation error messages. Any help that anyone might be able to provide would be greatly appreciated.
Last error message:
Install failed: The Installer could not copy the necessary support files.

Did you partition and format the new drive first?
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Upon completion quit Disk Utility and return to the installer. Complete the Snow Leopard installation.

How can i run snow leopard and leopard in my mac?

how can i run snow leopard and leopard in my mac?

First, your Mac model must be able to run Leopard. Second, you would have to partition your hard drive to create a second volume then install Leopard on the new volume using a Leopard installer DVD.

Can i run snow leopard on macbook pro puchased new in 2009?

Can I run snow leopard on macbook pro purchased new in 2009?

The Snow Leopard 10.6 DVD should still be available at this time from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion or 10.8 Mountain Lion is part of the 10.6.6 update.
If you wait to long and they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already over $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0

I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

Most likely won't run SL unless it's one that was released before Lion went public. Color SL gone from new Macs.
27" i7 iMac 10.6.8 , Mac OS X (10.7.2), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)

Can not run Snow Leopard in 64 bit

Hi there,
I recently bought the Snow Leopard OS for my iMac 2007/2008 model.
Here are the specks on my iMac:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2,4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.20f4
My question is, how is it that I can not run Snow Leopard in 64 bit – it is an Core2Duo which to my understanding is also an 64 bit processor.
To add to my confusion I’m running the Windows 7 64 bit version on the same iMac via VMware-fusion.
Had some help on this issue before, where this mac-person found an small program on the internet that is suppose to analyse and change some settings so it runs 64 bit - but my model was not supported by some odd reason.
Is here anyone that can reply on my question??
Thanks
Arni

Welcome to Apple Discussions.
I have to admit I'm a little confused. I don't believe your iMac is a Core 2 Duo. The only Core 2 Duo in 2007 was the mid 2007 24" 2.8 GHz processor, all other 2007 iMacs are 32 bit. I would recommend going to this site to see what the specifications are for your machine, simply type in the SN and it will let you know.
http://www.appleserialnumberinfo.com/Desktop/index.php
Regards,
Roger

HT1277 Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?

Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?

Ok; I'm not sure what you're doing. 36 hours is rather long. Seems like a new migration. Not what I intended.
Here's what I intended: from the newly-migrated and apparently-corrupt environment, create a new user, not related to any existing user, nor any migration-created user, or any other user for that matter. That is, use  > System Preferences > Users and Groups, authenticate yourself by clicking on the padlock, and then click the + and create a wholly new user. Then log in under that user and establish the mail access.
36 hours? I'm wondering if there's an error or an exceedingly slow network here? Or a really, really slow disk? Or a sick backup? (WiFi isn't the path I'd usually choose, either.)
Failing the attempted second migration, I'd try a different tactic. Does your existing (old) system work? If so, I'd bypass the backup and connect an external (scratch) USB disk drive to the (old) sstem and then boot and use Disk Utility booted from the installer DVD disk or boot and use Disk Utility from the recovery partition or booted from a recovery partition created on some other external storage (details here vary by the OS X version and what hardware you have), and perform a full-disk backup of your original internal disk to (scratch) external storage. (Make sure you get the source and target disks chosen correctly here; copying the wrong way — from the scratch disk to your existing disk — will clobber your data!) In esssence, this will clone your existing boot disk. Then dismount the (formerly-scratch) external disk, transfer it over to the new system, and use it as the source of the migration, by performing a fresh OS X installation on the new system.
Target Disk Mode is also sometimes an option for accessing the disk for a migration, but that requires the right cable, and requires systems that have the same external connection; newer MacBook Pro systems use Thunderbolt for this, and older systems tend to use FireWire. And I'm guessing you don't have compatible hardware.
The details here can and do vary by your OS X versions and your particular Mac systems — if you'll identify the specific models and hardware, somebody might be able to better tailor the above (fairly generic) sequence to your particular configuration.

What is the best solution for me to run Microsoft Access on my brand new iMAC? Assume I'm a casual user.

What is the best solution for me to run Microsoft Access on my brand new iMAC? Assume I'm a casual user.
I am lead to believe by some real smart guys on the Apple site that If I have the Apple Store partition my iMAC and add the full suite of Office products on that partition, I can run the few Access programs I have and need to run.
Comments encouraged. Thank you in advance for your consideration and help.

You would have to install Windows, then install Microsoft Office Professional for Windows on it To install Windows you will have to choose between Boot Camp (faster, free) and a Virtual Machine (simpler, slower, easier to backup)
You should try LibreOffice (free), it can open Access files, it may not have all Access's feature set though, worth a try.
www.libreoffice.org

Can I run Snow Leopard on the new iMac

Apple is warrantying me a new iMac because I have had many problems with my current machine. It's a late 2008 Intel Core 2 Duo 2.66 Ghz machine that I have been running Snow Leopard 10.6.8 on. I have a lot of software that runs on Snow Leopard.
They will be replacing it with a new 21.5 inch iMac running Mountain Lion which will be released in the next week or two. My plan was to partition the hard drive, keep part of it for my current Snow Leopard and gradually migrate over to Mountian Lion.
Alas, they have told me that the new machines will not run Snow Leopard at all so partitioning is out of the question but that I can set up a "Virtual Computer" that will allow me to run Snow Leopard within the Mountain Lion Structure. This will allow me to still use my older software in a setup not unlike the Classic system that the early OSX used. The tech told me I would have to get some 3rd party software to do this but was not much more helpful.
Im looking for some specific info on what I need to do to keep my Snow Leopard viable on my new machine while I gradually migrate over to Mountain Lion.
thanks,
Rob

Here is a post that I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopar - not available on the newest iMac;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion - not available on the newest iMac;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.
And according to the author, it's not forbidden by the client EULA. Can't say for sure if the same method will work for Mountain Lion, though. He may have updated it here or on MacRumors, but I'm not aware of an update, or whether one is needed.
I do not give legal advice on MacRumors, I do contend that it is a common Urban Myth that the Snow Leopard EULA forbids its virtualization. Further, in the more than one year that I have been offfering my Snow Leopard into Parallels solution, NO ONE has met my challenge during this period of time to show me one, official written statement by Apple that would support the conclusion that Snow Leopard's EULA forbids its virtualization.
The method does work for Mountain Lion, with the proviso of the NOTE above about currently having to do STEP ONE on a Snow Leopard or Lion Mac.

Can I run Snow Leopard and Mountain Lion on the same iMac?

I have a late 2009 iMac with a 1tb hard drive running Snow Leopard. Can I partion the hard drive and upgrade to Mountain Lion on one part and keep Snow Leopard on the other? If not, can I partition my external back-up drive that I use for Time Machine to do the same thing?

Niel wrote:
Parallels will work with Mac OS X Server but not the client version of 10.6.8 or earlier.
(69744)
Snow Leopard client 10.6.8 (with Rosetta) running in Parallels 7 (or 8) in Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

Can I run Snow Leopard on my iMac + OS 10.4 as startup on external FW HD?

My iMac is running Snow Leopard.
I want to install OS 10.4 on an external FW HD and use that drive as startup to run older mac software (Canvas, etc.)
Can I do this? How? Snow Leopard won't let me install an older version of OS.
Thanks

Can I do this?
Only if your computer shipped with Mac OS X 10.4. Use the 10.4 package that shipped with it.
How?
Install it normally, considering the point above.
Snow Leopard won't let me install an older version of OS.
It's not Snow Leopard that won't let you. It's the computer itself.
(52089)

HT204382 mpeg video file won't open in quick time player on my macbook running snow leopard. Works fine in iMac running mountain lion. Any ideas

mpeg video file won't open in quick time player on my macbook running snow leopard.
works fine on iMac running mountain lion.
any ideas?

HI,
If iChat is Open and your think Accounts/Screen Names are logged in then go to the Window Menu
This should list the accounts that are logged in with various keystrokes ( Apple/CMD ( or ⌘) and a Number) shown next to them.
Using these should get the Buddy list "back".
It is possible to Hide the Buddy list and then Quit iChat.
iChat will then "remember" where the windows were eve if this was Hidden.
Can you confirm that after reinstalling or restoring from Time Machine with possibly an Earlier Version you have Downloaded the COMBO version of OS X 10.6.8 and "run the COMBO" (Installed it - again) to update iChat ?
It is possible the text chat Window is also Hidden on double clicking a Buddy.
The easiest way for this to happen is to use a second Display and drag some windows to the second Display.
iChat "remembers" where you last had Outgoing Chats so Audio and Video windows will be where you left them as will Text Chats.
Incoming Chat Invites are normally in set places unless there is a chat already open to that Buddy.
With Windowing issue like this is sometimes pays to delete com.apple.ichat.plist itself (on it's own) and restart iChat (this plist holds the window positions amongst other things)
8:49 PM Monday; February 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Snow Leopard Server on brand new Mini; Gray screen

I installed Snow Leopard Server on a new Mini. The install went fine. Shut the mini down. Started it up about 24 hours later, and I get to the gray screen and that's it.
I exchanged the mini for a new one. Installed Snow Leopard Server on the new one. Install went fine. Ran updates. Restarted the mini several times with no problem. Shut it down, waited 24 hours, and now it's the gray screen again.
Now what?

There's a huge thread on this (client, not server, but same concept) which you can find here.
https://discussions.apple.com/thread/3209335?tstart=30

Moving Snow Leopard iPhoto Libraries to new iMac with Lion

Can I move iPhoto Librarys from a iBook G4 running Snow Leopard to a iMac running Lion and if so how? Thanks, HJZ

Linc,
Thanks for the info, but I want to use an external FireWire drive as the target disk, not the old iMac. I'd need to keep the external FireWire drive connected to the old iMac in order to use the screen, keyboard, mouse, etc. Could I just connect the FW drive to the new iMac and then start up the new iMac in hopes it would "recognize" the external FireWire drive through Setup Assistant?

LR 5 running extremely slow on a brand new iMac

Hi, I just got a brand new iMac (specs will be attached on bottom) because my old pc was slowing down. I downloaded the CC LR and PS trials so I can see how the machine works, figuring it would be way faster then my old one (2009 machine, specs also on bottom). Unfortunately, LR is running much slower on my new machine and I am quite frustrated since I only bought the iMac due to performance issues with my old machine. I am hoping that it has to do with the setup and am hoping someone here can help me figure it out, or I will have to return this machine.
I really wished that I could talk with customer service, but that seems to be not an option, which makes me quite disappointed with CC and Adobe. I have the Scott Kelby LR5 book and set preferences up the way he did, but maybe I am missing something that he is not talking about. I have used LR since version LR3 and have not had any issues with it on my other machine, besides it slowing down now that I got a camera that produces bigger files sizes than my old.
Please let me know what other info I should supply. Thanks so much!
old machine specs where LR5 is running much faster then on this brand new one

HI this has been well discussed on the Macrumours forums and here too. Seems to be an Adobe thing as other similar software does not do this.
may be down to LR not making use of the GPU or some other reason, I'm trying to make my mind up between buying LR 5 or buying Capture One a pro 8 Which is a fantastic piece of software which does make use of GPU.
i Was hoping LR6 would come out soon (March 2015) but apparently that is just a rumor with no substance.
decisions decisions!

Can i run snow leopard on my brand new iMac i5?

Similar Messages

Maybe you are looking for