Can I run Solaris 10 with a Radeon 9550?

Hi!
I would like to install Solaris 10 on my x86, but I'm not sure if my Radeon 9550 is supported. The driver download center at ATi has only Windows and Linux. Does the Linux driver work? Or better, has Solaris 10 integrated support for this graphics board?
Thanks.

Solaris 10 x86 includes:
1. a radeon driver from Sun, for Xsun
2. the radeon driver from X.org, to be used with Sun's Xsun X11
server
3. a VESA driver frlom X.org, for Xsun
4. the complete X.org X11 server, including X.org's radeon driver
5. X.org with VESA
I don't know if your specific model of the Radeon 9550 will be
recognized without problem, but with five drivers to choose from
I'd say chances are quite good that it works.

Similar Messages

Can I run 2 monitor with one of the monitor having Full Screen for Elgato Eye TV?

My mac mini has Elgato 'Eye TV' software that runs in 'Full Screen'. I want to keep this setting & also connect another monitor to the macmini & use other Appilications on the other monitor? Can I run 2 monitor with one of the monitor having Full Screen for Elgato Eye TV?
My early 2009 macmini can run Mac OS 10.5, 10.6, 10.7 & 10.8

Yes, run one from HDMI and the other from Thunderbolt/minidisplayport sockets. In EyeTV Preferences check the screen you want for full screen use and make sure your Dock is on the other one.

Can I run Photoshop CS6 with Vista?

Can I run Photoshop CS6 with Vista?

Hi Levine919,
Photoshop CS6 has not been tested on Vista.
Please check the Tech Specs : http://www.adobe.com/mena_en/products/photoshop/tech-specs.html

Can you run microsoft office with mavericks

can you run microsoft office with mavericks?

Yes if its the Microsoft office for Mac version
Check the Microsoft packaging
http://www.microsoft.com/uk/mac/products
and
http://store.apple.com/us/browse/guide/windows
see thread
https://discussions.apple.com/thread/5480447

V490 running solaris 9 with warning messages:

I have a V490 running solaris 9 with the full recommended patch cluster and the SFS_base packages (and the additional patches) installed.
Installed in the V490 is 1* SG-XPCI2FC-QF2-Z (dual 2Gb fibre card). On rebooting the v490 the follwing warning appears:
WARNING: fctl: ULP FCSM version mismatch; please upgrade FCSM
Does anyone know if this is a major issue and if so is there a fix?
I have never seem this message before as we usually use the X6768A and maybe there is some difference in the card.

I am having the same issue after installing the card "SG-XPCI1FC-QF4" on V490.
I have opened a ticket.
Is this a major issue or missing patches?.

Can't run my app with older version of jre anymore. Help!

Java Web Start is supposed to allow applications to use older versions of Java JRE. My applet uses 1.6.0_31 because it doesn't work with 1.7. (Backward compatibility? Don't ask.)
When I first set it up a couple of weeks ago, it worked. Now, with JRE 1.7 officially released it does not. When I try to run it, I get the following message:
"This application would like to use an older version of Java (1.6.0_31) that is not installed on your system. We recommend running the application with the latest version o java on your computer. Then there are two buttons.
One button says "Run with latest version". The other button says "Cancel". When I click on "Cancel" the application fails with the following
basic: LaunchDesc location: http://relativitysimulation.com/Applet.jnlp
network: Created version ID: 1.6.0.31
network: Created version ID: 1.7.0.03
network: Created version ID: 1.7.0.03
network: Created version ID: 1.7.0.03
network: Created version ID: 1.7
network: Created version ID: 1.6.0.31
network: Created version ID: 1.6
network: Created version ID: 1.7.0.03
network: Created version ID: 1.7
network: Created version ID: 1.7.0.03
network: Created version ID: 1.7
network: Created version ID: 1.6.0.31
network: Created version ID: 1.7.0.03
network: Created version ID: 1.7.0.03
network: Created version ID: 1.7.0.03
network: Created version ID: 1.7
java.util.MissingResourceException: Can't find resource for bundle sun.applet.resources.MsgAppletViewer, key appletpanel.ExitException[ 0]
     at java.util.ResourceBundle.getObject(ResourceBundle.java:393)
     at java.util.ResourceBundle.getString(ResourceBundle.java:353)
     at sun.plugin2.applet.Applet2MessageHandler.getMessage(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.logAppletStatus(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:722)
basic: ExitException[ 0]
ExitException[ 0]
     at com.sun.javaws.ui.SecureStaticVersioning.showCannotDownloadDialog(Unknown Source)
     at com.sun.javaws.ui.SecureStaticVersioning.canAutoDownload(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager$JnlpLaunchState.doJvmSelection(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:722)
security: Accessing keys and certificate in Mozilla user profile: null
security: Reset deny session certificate store
Looks to me like Cancel does not mean "Run Older Version". While I am debugging why I can't use the latest version of jre, can someone please tell me how to use the older version?
Edited by: 932841 on May 8, 2012 8:54 AM - corrected typo

I'm the developer. And thank you for your prompt response. I have been given a work around so that the applet can use version 1.7. But that still doesn't explain what I am doing that makes Java fail to use the older version.
I put this code in my jnlp file on March 27th when I realized that my app didn't work with version 1.7. I tested it at that time and it worked. In the process I installed and uninstalled java 1.6.0_31 ( and 1.7) several times. Maybe something important got corrupted then.
<resources>
     <j2se version="1.6.0_31" href="http://java.sun.com/products/autodl/j2se"/>
Added this -----
Oh, if someone else wants to try this app on their machine, feel free. It is at
http://www.relativitysimulation.com/Applet.html
Edited by: 932841 on May 8, 2012 11:13 AM

Can't run the webcam with MAX and LV12

Hi,
I would like to configure and run a webcam via Measurement & Automation Explorer and Labview 2012.
I am working in windows 7 Ultimate (64bits).
Labview: 2012 (32bits) V 12.0f3
MAX: V5.3.3f2
Vision Acquisition Software: 2011
I installed Labview 2012 without issue. Then i installed Vision Acquisition Sofware 2011 to have the library neccesary for the webcam. But, before the end of the installation. I got this error screen ( see bellow Windows_Firewall_Might_Be_Enabled.jpeg): WARNING: Windows Firewall Might Be Enabled. So, i tried to turn OFF, turn ON my Windows Firewall. I have still had the same error screen even if I tried to reinstall Vision.
Any ideas about this issue?
Then I ran Measurement & Automation Explorer, go to Devices and Interfaces and NI-IMAQdx Devices. I can see my webcam ( Logitech HD Webcam C270). Double click on it. And i have the first error screen :cwimaq Errors loading control. The default settings for the control will be used. Then this error message: cwimaq Error creating default control. And i have a Unexpected Error (see picture bellow). I tried couple times to restart the computer. But It is still the same issue. So, I really don't know why it is doing that. Any ideas?
And when I run Labview and try to go in propreties of Vision Acquisition Express: Labview displayed : Unable to view properties.So I can't use my webcam with Labview for the moment. Furthermore, I downloaded ni_imaq_usb_installer_86 to get the good library for the usb.
Thanks for helping me,
Best regards,
Francois
Attachments:
Error_webcam_Labview.7z ‏235 KB

I found this topic http://digital.ni.com/public.nsf/allkb/244E6DDF9A92A6CD8625730100629047
Application
Programming
Interface (API)
Vision Development Module Version
5.0
6.0
6.1
7.0
7.1
8.0
8.2
8.2.1
8.5
8.6
2009
2010
2011
2012
LabVIEW
2012
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
So, I am thinking this is probably my issue. Because I installed Labview 2012 but my VDM is 2011.
Anybody has already installed VDM 2011 on Labview 2012, and it is or not working?
Regards,
Francois

HT5049 how can i run windows xp with OS X v10.7.3?

I bought a copy of Windows XP (as recommended by my place of work) to enable me to work from home. The intention was to use boot camp to partition my had drive and install windows in the partitioned area. Unfortunately v10.7.3 doesn't seem to allow me to do this - it only seems to accept Windows7?

stephenfromcroydon wrote:
Unfortunately v10.7.3 doesn't seem to allow me to do this - it only seems to accept Windows7?
that's correct. With 10.7, only Win 7 can be run under boot camp. To run XP with Lion, you will need to use a virtual machine such as Parallels or VMware Fusion for example.

Can i run routing protocol with only F2 line card?

Hello. : )
One question.
Can i run routing protocol such as ospf, bgp, eigrp with only F2 modules? (no M linecard)
Thank you in advance : )

Hi,
Yes, you can use OSPF, EIGRP, IS-IS, etc...
see link below for more info:
http://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/at_a_glance_c45-689339.pdf
HTH

Can you run (G550) laptop with screen closed?

I'm thinking of using my laptop as my main machine connected ot my monitor and use input devices. However, when I tried, closing the screen automatically hibernates the laptop. Is it possible to run the laptop with the screen closed?
Solved!
Go to Solution.

you can do it on every laptop
cause there is a power option on windows operating system that you can set it to the prefrences that you like
for instance not to shut down or hybernate when you close the lid

Can not run file.class with Internet Explorer ( Please help me)

Please help me ! ! (Beginer Programming)

First, you can't run a .class file. Secondly, you have to post your code, that is the only way we could help

Can i run elements 13 with windows vista

is anyone running elements 13 with windows vista?

Adobe Photoshop Elements 13 for Mac, Windows - System requirements
Only Windows 7 or Windows 8.

Can't run .jar file with JavaSE

Hello.
I'm trying to run a .jar file with JavaSE Binary, just like I did with Windows. I Ctrl+Rclick and pick "Open with..." and there is no such option. I've been searching the whole day for a solution, I kept getting "Open Java Preferences... put on top of the list" and things like that. There is no "Java Preferences" in the Utilities folder, and nothing related to my problem in "Java Control Panel" in System Preferences. Yes, I have Java 7. I just need to run this file with Java. How?
Thanks in advance.

Max. allowed size of .jar file is 1MB.

K8MM-ILSR PROBLEM with ATI Radeon 9550 of 256MB AGP port 8X...

Hello, I have a motherboard MSI-K8MM-ILSR, when use the onboard video card works correctly, but the problem begins when I install a ATI Radeon 9550 of 256MB, is AGP port 8X and has its dissipator, in other machines it works well and your temperature is ok. My monitor is Samsung Sync Master 793s at 75 Hz. The Problem is the following: the machine crash and the video is distorted and it is congealed, this happens after playing a little, the video card drivers are updated (Catalyst 5,6), I'm use Windows XP Service Pack 1, Thanks... and excuse me my English...

Some other options you can try:
- uninstall the previous vid-drivers and use driver cleaner software to uninstall everything
- disable onboard video in the BIOS;
- set fastwrite to disabled/no (if it's there)
- set AGP Aperture Size to 128 (if it doesn't do anything, go to 64);
- set AGP port to 4x.
- Start hoping .... good luck!
(BTW, the last two options may cause your system to operate slightly slower, but it's hardly worth mentioning ... )

Can't run Solaris OVF on Virtual Box 3.2

I just installed Virtual Box 3.2 on Windows 7 64-bit and I wanted to use the Solaris OVF (downloaded from the site). I imported the ovf file to the VB, using the default setting except the memory (changed from 768 to 1024). After it's done, it just wont start. it boots up then it gives an error:
syncing file system 1 done (sometimes it's 2 done, or 1 1 done)
then it dumps the kernel, then reboots. it does this over and over. i can boot it up in single-user mode.
are they just not compatible or something?

I'm able to run JSF 2.1 on Tomcat 7 without error, so it's something specific to your environment or application. Looking at the stack trace, I see several instances of "java.lang.IncompatibleClassChangeError", which suggests the code is being loaded by a VM with a different Java-compliance level than the VM that compiled the code. You might want to look at your VM settings for the project and the runtime configuration for the server. There may be more issues, but first I would rule that out.
- Ian

Can I run Solaris 10 with a Radeon 9550?

Similar Messages

Maybe you are looking for