Can I run Story as a stand alone application?

Need to know if I can install\run Adobe Story as a stand alone application, or do I need to access it via the Cloud, then use offline mode to simulate what I am looking for?

Hi I'm having trouble with both the new update failing to install and not allowing me to login-on the desktop version. It's says my password is too long, when it's working fine everywhere else..?
Many thanks,
Samantha
[email protected]
http://uk.linkedin.com/in/sammihamer/

Similar Messages

General: can the OAF work as a stand alone application

hi...
can the OAF work as a stand-alone application??
please help

Thanks.
OAF provides Developers with templates that utilise Oracle EBusiness technologies, for security, session handling, etc so cannot
be used outside the eBusiness environment.
The JDev version for eBiz is a specific eBiz version, but if you have non-eBiz programming requirement, you can still use this JDeveloper environment to create non-eBiz integrated applications. Alternativel
you can use a seperate install of JDeveloper/ADF

Running coherence as a stand-alone application

Hi,
I would like my java client application and the coherence clusters setup in different machines (in the same LAN). Suppose my client application is running on the machine x.x.x.x and my coherence cluster is running with two nodes (node1 : y.y.y.y, node2: z.z.z.z) . How do I configure my java client application(running on x.x.x.xmachine) connect to the coherence cluster?

As a previous poster stated the Firewall at your work is probebly stopping the traffic from coming in. You might be able to get away with this using the IIS isapi that tomcat provides, however you may still have firewall issues. If your network/security guys are not to anal about it, they might be able to open up pot 8080 for incoming traffic to that server only. Otherwise, you may want to try the Tomact isapi.
Hope that helps to clarify it a bit... ;)
rb

I have trouble in building stand-alone application, "you must intall Labview run-time engine on any computer on which you want to run this application"

I have installed the LabVIEW 7.0 run time engine and checked all in the advanced setup on the installer setup slide. but I still get such a message saying that the target computer needs to have LabVIEW 7.0 run-time engine. What I want is a real stand-alone application even without having labview ... I used to think that's due to my program contains MATLAB nodes. But this is not true, since even without Matlab, it's still wrong. Please help, thanks!!!

As was stated elsewhere, you have the option of building the runtime engine into your application when you build it. However, you can also create a "runtime engine application" by simply opening the application builder and doing a build without adding any source code files. The result is a small program (named lvrt.exe) that can run any LabVIEW code--whether or not its built into an executable.
Such an application can be helpful if you are wanting to install several LV-based applications on the same computer in that it reduces the amount of redundant code on disk. All you have to do is make sure that Windows on the target computer associates the llb and vi file extensions with the runtime engine program.
It can also be helpful during testing to run test code that isn't built into an executable.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Can Xserve be used as a stand alone computer ?

can Xserve be used as a stand alone computer ? ..
with monitors and other hardware connected to it ?

Yes.
It's loud.
70-some decibels of loud, particularly when the fans spool up.
And you need a big flat spot, or a 19" rack.

Time capsule - WiFi - can it be used as a stand alone station?

I have set up my Time Capsule as a WiFi station and it is showing as connected to my iMac, but the amber light it flashing and I cannot get it to go green. Do I HAVE to connect it to my external router or can it be used as a stand alone WiFI station? If so, how do I get the light to stop flashing? The TC was connected by ethernet cable (green light) but that seemed to slow down my access to the Internet so I disconnected that. Now I can see the back ups but cannot restore from any of them.
Regards
Oldmoondog

The Time Capsule must connect to a modem or other router using a wired Ethernet connection.
The only exception to this would be a setup where you have one Apple router set up as your "main" router connected to the modem. In that case, it would be possible for the Time Capsule to connect to the main Apple router using a wireless connection.
Assuming that the Time Capsule is operating correctly, and that it has been set up correctly, there should be no speed loss when a Time Capsule connects to a modem or other router using an Ethernet connection.
For example, I have a 50 Mbps Internet connection plan from my Internet Service Provider (ISP). If I cannot the Mac directly to the modem, my speed is usually about 52-55 Mbps.
If I connect the modem to the Time Capsule using Ethenret, then connect the Mac to the Time Capsule using Ethernet, the speed is almost exactly the same, about 51-54 Mbps.

Can i install oracle9i on a stand-alone system

Can i install oracle9i on a stand-alone system or does it need a server/client nodes and software?

Yes,
You can Insall Personal Edition of Oracle 9i. But this you have install from Server Edition CD only.
W/R
Vaj.

Stand alone application(.exe) : Error 7 occurred at Open File+.vi: Open File (error: L'erreur 7 s'est produite à : Open File+.vi:Open File)

Dear group members - as i am trying to build a stand alone application , i ran into this problem : "Error 7 occurred at Open File+.vi: Open File" (L'erreur 7 s'est produite à : Open File+.vipen File)
when i select continue i get this error message: "Error 7 occurred at open/create/replace file in Write spreadsheet string.vi->Write To Spreadsheet File (I64).vi->Mono Com Write ini.vi->mainVI2.vi"" ( "L'erreur 7 s'est produite à : Ouvrir/Créer/Remplacer un fichier dans Write Spreadsheet String.vi->Write To Spreadsheet File (I64).vi->Mono Com Write ini.vi->mainVI2.vi" )
i didn't get what's the problem with this vi, i have no problem running my VIs
Can any one here help me out ?
here is the project :

Neither can I. When I opened your Project, there were no VIs present on the top level. The Build Spec refers to a Mainv12, which I finally found buried in the folder Interface 2, but when I tried to open it, there were multiple missing VIs. I notice you have an Interface 2.llb -- is this the same as the VIs in the Interface 2 folder? If so, try getting rid of the .llb (at least for the purpose of sharing your code in the Forum) and re-post your code. As it stands, when I open your Project, virtually every entry is marked "Warning: has been deleted, etc." The fact that so much is "missing" means that I can't easily see/understand MainV12, hence can't guess where the File Not Found error is arising. Sorry.
Bob Schor

Stand-Alone Application including ocx, dll and Word template folder

Hi,
I try to create an Stand-Alone Application with labview 2011. My problem is how i can include ocx and dll file in my executable to be run by others computers (the other computer don't have the dll and the ocx using in the application). My program use Word template who is in a folder. How i can integrated this Template folder in my executable folder.
This is the first time I create an executable, so please help me -_-.
Nki
Solved!
Go to Solution.

Hi nki,
To include the ocx and dll files you will need to build an executable for your VI and then create an installer for the additional files. I have linked 2 documents that will explain each of these steps. If you have any questions with this let me know.
http://zone.ni.com/reference/en-XX/help/371361E-01/lvhowto/exe_ex/
http://digital.ni.com/public.nsf/allkb/E09BA0E2F31D304F86256A640070058E?OpenDocument
Patrick H | National Instruments | Software Engineer

How to include dll into a stand-alone application

Hi, I wrote a vi to process images from my camera, and I want to build a stand-alone application(exe), so I can share the application with my friends. I just do as wht's in the Labview help, but when I run the exe file in other PC, it tells me I haven't nivision.dll etc. My question is how to find out the dll files in my vi and include these files in the stand-alone application?

To be honest I am not sure. Its been a while since have used the vision run-time engine. Before I installed it on the target computer. I ddn't include it with my application build.
Take a look at this http://digital.ni.com/public.nsf/allkb/1A9A18AA574ABEDF86256F780062C240 it might help. Also look at the documentation supplied with the vision deployment license.
David

Setting Current Values as Default in Stand-Alone Application ?

Hi
I have a stand-alone application using LabVIEW run-time and I want the user to be able to make the choice if he wants to retain the default values or modify them ? I know you can't use the invoke node and set the current values to default because that works only in EDIT mode. I saw some postings where there was a talk about using configuration VIs. I am not sure how to use them. Also is there some other way I can accomplish this ?
Thanks
Sridhar
P.S: I use LabVIEW 7.0
Kudos always welcome for helpful posts

I would use a configuration file to hold default values for my controls. When the vi starts, prompt the user to select default values or to modify. You can use a two button dialog to do this. Wire the output to a case structure. If the user selects default, read the config file and use the values to set your controls values. If the user selects modify, call a subvi that gives the user an interface to modify the values. You can start with the old default values. This subvi would have a loop, waiting for the user to press either a cancel button or a change button. If the user makes changes and presses the change button, exit the loop and write these new values to the config file. If cancel is selected, exit the loop and do not write to the config file. Upon returning to the main, read the config file and set the control values accordingly. You can even go a step further and create a "factory default" file. This file would be read only. The user can be given a choice to select this file in case he made changes and saved them to the config file, and the new changes were all screwed up.
Config files are nothing more than a file containing keys which represents controls, and the data values for those controls. There are examples located at \examples\file\config.llb.
- tbob
Inventor of the WORM Global

T's possible to use the jsp to develop stand-alone application?????

Hello everybody, I would like to know your considerations about this topics: It's possible to use jsp to develop stand-alone application that will be not run on the server but on the local machine?There are some negative aspects on make this? Thank you for your reply

i don't think you could ever protect the jsp code and it wouldn't do you much good to bother anyway, since anyone with a browser can just "View Source" and see all the HTML on the page anyway.
the only thing you would want to protect is your java source. you don't have to distribute the .java files with your application, just the .class's. you could try and obfuscate the .class files, but a determined person will always be able to reverse it back to a .java program and read it. it would take a bit of work and knowhow though, so figure out how smart the consumer is going to be and if they will be able to figure out how to reverse .class files back to .java

Is it possible to have a user interface in a stand alone application without having LV

Hi!
I want to know if it's possible to build a stand-alone application in order to avoid purchasing LV and at the same time having a user interface to display data?
I really want to know what are the advantages of the stand-alone applications and what are their limits of use?
Thank u

If you have the application builder (included in LabVIEW professional and above) you can make a LabVIEW application that can be distributed and run on machines that don't have LabVIEW installed. If you only have LabVIEW full, you can purchase it seperately.
The target machine requires the LabVIEW runtime, which is freely downloadable from NI, or can be included with the installer of your application.
Please have a look at the datasheet: http://www.ni.com/pdf/products/us/4msw55.pdf
If still have more specific questions not mentioned in the above link, please ask.
Message Edited by altenbach on 10-01-2007 01:01 AM
LabVIEW Champion . Do more with less code and in less time .

Stand-alone application generates error with function 'Ramp Pattern' (bug in application builder?)

Hello,
in my program a main.vi links to a sub-VI via 'open VI reference' and 'invoke node'. In this sub-VI the function 'Ramp Pattern' is used. The program itself runs normally, but if I build a stand-alone application using application builder I get an error message 'error 1003 occurred ..'. I believe this error is directly related to the build specifications which are as follows: the main.vi is referenced in a main build specification, the sub-VI in its own specification where the target is a LLB.
I appended an example-program that exhibits the error (when executing 'Application.exe' and pressing 'calculate ramp'). The error does not occur when disabling the 'ramp pattern' function and rebuilding the application.
I would rate this to be a bug in the application builder and would appreciate any help on how to solve this problem. However, due to the structure of the whole program the sub-VI has to remain in its own LLB.
Attachments:
RampPattern.zip ‏198 KB

There can be reasons why a VI might appear broken when loaded from an executable. For example, if you have different versions of the same VI or enum that differ in such a way as to break the calling VI, that can cause a broken arrow when loaded from the executable. If you have DLLs being called and the runtime engine can't find the DLL, that can cause a broken arrow that you might not see otherwise. Finally, there is a bug related to a VI appearing broken when its not.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Is there any way to restore a vi from a stand alone application

I was trying to setup a datasocket write from a vi and was going to test the datasocket read. I received about 5 "Insane errors" when I hit run that seemed to reference Fieldpoint(the main vi reads from Fieldpoint). Completely bombed me out of labview and it seems that these errors totally wiped out the main program...The file is still in the directory titled the same, but at 0kb and when I open it is untitled and completely blank no code no nothing. The only backup I have is a stand alone application. Is there any way of getting back to the block? First time I've ever seen Labview erase the entire program contents...lesson learned I guess.
Thanks in advance,

I've never heard about something like this, but first rule anyway - ALWAYS (ALWAYS!!!) BACKUP.
As for the answer - if you built the application with the default settings, you can't extract the BD because there isn't one, only compiled code. Some people build applications as collections of LLBs, which they can then replace, without replacing the EXE itself, but I'm assuming this isn't your case.
Try to take over the world!

Can I run Story as a stand alone application?

Similar Messages

Maybe you are looking for