Can I run SUN and BEA JVM with WL9.1 on Solaris 9

Is it possible to run a WL9.1 domain on SUN JVM and another one on BEA JRockit? The reason I asked is that for the WL9.1 Sparc download, there's one for Solaris 8,9 and 10 on Sparc and there's another one for Solaris 9 with JRockit Supported. Is this mean I have to install both on 2 separate BEA home?

Right, I read the docs. What's confusing is that on the WLS download page, there's a download for the Solaris Sparc 8,9,10 (server910_solaris32.bin). There's another download for Solaris 9 with JRockit Supported (server910_generic.jar). For the server910_solaris32.bin, it comes with the SUN JDK. For the server910_generic.jar, it doesn't have the SUN JDK and it needs a separate JRockit download, jrockit-R26.3.0-jdk1.5.0_06-solaris-sparcv9.bin. Also, in the WLS9.1-JRockit install docs, it requires the LD_LIBRARY_PATH to point to sparc64 instead of sparc in the {WL_HOME}/common/bin/commEnv.sh.
I guess my question is which file should I use for the base WLS install? server910_solaris32.bin or server910_generic.jar? If I use the server910_solaris32.bin, I will need to add JRockit as a separate install. If I use server910_generic.jar, i will need to install JRockit as well as the SUN JDK.

Similar Messages

  • Can I run XP AND Vista 64 with bootcamp?  Or does it only allow dual boot?

    Hi Folks.
    Reinstalling Bootcamp. Want to use Vista 64 for faster Mental Ray rendering on 3dsMax, but I still want to play games on XP. Can I do a triple boot install with Bootcamp?
    If not can I do an XP install then do a dual boot within my Windows partition or will that confuse bootcamp?
    Anyone had any luck with this?

    Easiest if you install Vista first to a boot camp space that will be large enough to hold all the Windows OS's you want to use. After install, right click My Computer -> Manage: select Disk Management; you can shrink Boot Camp partition C, which leaves OS intact but allows another install to new D: "drive" created from shrink. Option key at start up allows boot for next install. You can control resulting Windows multiboot from System Properties->Advanced tab->Start and Recovery Setting.
    Because Dos isn't there for FDisk at start up, in XP, I've done same with Diskpart.exe which is likely in \System32. Have not done this in Mac.

  • CAn I run Lion and snow leopard on the same computer with different sign-ins?

    CAn I run Lion and snow leopard on the same computer with different sign-ins?

    Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

  • HT1199 Can  I run iTunes and Apps on my Windows 7 computer or do I need an ipad or iphone ?

    Can I run ITunes and Apps on my Windows7 computer. So  far the one App I have downloaded just won't run. Do I need an iPad or IPhone to run these programmes?

    There is an iTunes on the idevices, just a Store effectvily.
    There is an iTunes on a PC and Mac, which is the Library handler, and connects to the iDevices for sync and backup.
    The Apps that you download for iDevices are downloaded with "Appstore" on that iDevice itself, or downloaded on the Mac or PC with iTunes for transferring to the iDevice.
    That apps will only run on the iDevice.
    For Window s7 and Windows 8 there has just been released a new iTunes version 11.
    Lex

  • Can we run SCC7 and BDLS in parallel?

    Hi Folks,
    We are creating a new R3 system which is a copy of a large production system. There is a requirement for running BDLS to change the logical system name. Since the source system is a huge one, SCC7 and BDLS take a long time to get completed. So, just to save time in delivering the system to the customers, can we run SCC7 and BDLS simultaneously? If not, why?
    Thanks
    Ranga

    Hello,
    Is there any connection between the two? - Of course
    SCC7 is 'Post client copy processing' - which is a part of Client copy
    BDLS is logical system conversion to be done after Client copy
    Until n unless you are not finished with Client copy why would you want to convert logical systems ?
    I would say, you please go through some BDLS SAP Notes to get the concept first - as why we need to run BDLS.
    Thanks

  • Can Tiger run a dual boot system with the two internal hard drives

    Can Mac run a dual boot system with the two internal hard drives both running Tiger?
    Dual 2.5GHz G5
    I am wanting to use one hard drive with Tiger to run my graphics stuff and then reboot and use the other hard drive for video.

    Yes, you can set that configuration up.
    (26293)

  • How can I uninstall yosemite and reinstall Loin with out losing all my in formation and programs

    How can I uninstall Yosemite and reinstall Loin with out losing all my in formation and programsThis had been the worst os system apple has come out, too many errors
    too many to list.
    a few
    Losing all mail. and watching them disappear in front of my eyes and could nothing about it
    also when accessing cloud the screen just rolls in when accessing mail, like loading and loading and loading for 1 to 2 minuets.
    I did not up grade my Mac Book Pro, and is working fine,
    Just my iMac, its act kile avid card and it only happens access iCloud mail.
    so I want to and need to go back to Loin

    You can't unless you have a current backup of your old Lion system because the first thing you must do is erase the drive. It 's possible to use Target Disk Mode between your iMac and the MBP in order to clone the MBP to the iMac. However, that will still erase everything on the iMac's drive.
    Or you could see about getting Yosemite to work correctly. If you have IMAP mail, then your mail should be intact.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Download and install the 10.10.1 update.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Download and install the 10.10.1 update.
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

    Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
    Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • TS5376 I have a laptop that i am running with Windows Vista. A while ago, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.

    I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
    However...
    I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
    I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
    The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
    Any help please on this would be appreciated!
    Pete

    See Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
    tt2

  • I can't run LR5 and EOS utility at the same time

    I'm running Mac OS 10.9.5, LR5.7 & Eos Utility 3.
    I can't run LR and Eos3 at the same time. Eos just crashes and have to force quit Eos.
    Any tips anyone?
    Do I have to downgrade to Eos2. Not a problem really I suppose.

    LR supports tethering using a Canon DLL and EOS Utility probably also supports tethering or at least uses something from a similar Canon DLL.  You probably cannot have two different versions of that DLL loaded at the same time, so it makes sense there are problems.

  • Can I generate sine and square waves with NI PCI-MIO-16XE-50 card??

    Can I generate sine and square waves with NI PCI-MIO-16XE-50 card??
    How Do I generate those signals?

    Hello;
    You certainly can do that. The way to go about that is to use one of the Analog Output channels your board have available.
    If you are using Labview to program the board, you can find good examples at Search Examples->I/O Interfaces->Data Acquisition->Analog Output->Multiple Point (buffered) Analog Output.
    If you are using other Software language to program the board, you can fing examples at C:\Program Files\National Instruments\NI-DAQ\example\VisualC\AO.
    Hope this helps.
    Filipe

  • Does anyone know why I can only get sound and no video with a compatible component cable?

    Does anyone know why I can only get sound and no video with a compatible component cable?

    What apps are you trying?  TV out video only works with apps that support TV out.  If the app does not support TV out you will still get aoudio via the component cable

  • Can we run oracle Forms 5 Application with 10G in Client/Server?

    Hi All,
    Can we run oracle Forms 5 Application with 10G in Client/Server
    Mode?
    Regards
    Gaurav

    In theory you can run it 2 tier - which means that you have the client (the machine the user is sitting at) being the same machine in which the forms application server is running. So yes. But specifically, we don't support a client server runtime anymore. 6i was the last version.
    With 10g you will be running through a browser.
    Regards
    grant

  • Can we run SYSAUD and DDDAUD reports from AppDesigner? If yes, how to?

    Can we run SYSAUD and DDDAUD reports from AppDesigner? If yes, how to?

    No, you cannot run any program from AppDesigner. This is a development tool.
    However, without the front end application, you could be able to run programs through the commands lines (PSSQR/PSAE...)
    Nicolas.

  • Can I run rhino and grasshopper on a virtual windows on my macbook air?

    Can I run rhino and grasshopper on a virtual windows on my macbook air? I keep getting a not enough memory message.

    The USB stick from your MBA cannot be used on any other Mac. You will need to purchase a retail copy of Snow Leopard for your other computer.
    If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.

Maybe you are looking for