Can I run the DSCC ADS instance on a different port?

Due to a limited environment I must run 2 instances of DSCC 6.3 on a single server. I was able to put tomcat on a diferent port from 8080, but I can not get the second DSCC ADS instance to go to a diferent port than 3998 and 3999. Can this be done?
Thank you.
tad
Edited by: tadeu on Jul 9, 2009 3:34 PM

You can have multiple instances in one box/zone running on different ports and there needs to be only one DSCC registry per box/zone. You do NOT need install DSEE zip multiple times to have multiple instances.
eg: Install DSEE in /export/home/dsee63
# create new instances like
$ /export/home/dsee63/ds6/bin/dsadm create -p 1389 -P1636 /export/home/inst1
$ /export/home/dsee63/ds6/bin/dsadm create -p 2389 -P 2636 /export/home/inst2
$ /export/home/dsee63/ds6/bin/dsadm create -p 3389 -P 3636 /export/home/inst3
Register all of them with the SAME dscc registry
# create registry
$ /export/home/dsee63/dscc6/bin/dsccsetup initialize
# register
$ /export/home/dsee63/dscc6/bin/dsccreg add-server /export/home/inst1
$ /export/home/dsee63/dscc6/bin/dsccreg add-server /export/home/inst2
$ /export/home/dsee63/dscc6/bin/dsccreg add-server /export/home/inst3

Similar Messages

Can I run the admin and managed servers as different users?

in unix, is it possible to run my admin and manged servers as different users with
7.1?

As long as users are in admin group, there could be different users starting different
servers.
"Frank" <[email protected]> wrote:
>
"Erik Johnson" <[email protected]> wrote:
Hi, Frank.
Could you be a little more specific about what it is you want to do?
Thanks.
erikUh, I'm on unix, I have Weblogic 7.0 service pack4. I have 1 managed
server and
I have one admin server...Can I run the admin server as user 'hithere'
and run
the managed server as user, 'byethere'......
"Frank" <[email protected]> wrote:
in unix, is it possible to run my admin and manged servers as different
users with
7.1?

Is there a way to selectively edit a conversation in iMessages instead of clearing the entire conversation? Like you can do on the iPhone for instance.

Is there a way to selectively edit a conversation in iMessages instead of clearing the entire conversation? Like you can do on the iPhone for instance.

Did you find an answer to your question?
Would it also apply to Mountain Lion's Messages?
Thanks

HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars.

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

Can't run the cluster example

          I would appreciate if someone can explanation my long list of questions regarding
          the deployment of EJB in cluster environment.
          I can't run the cluster EJB example( Teller/Account) in a cluster(contains two
          server2). I always get
          java.rmi.RemoteException: Unable to
          resolve examples.cluster.ejb.Account
          Home. Resolved: 'examples.cluster.ejb'
          Unresolved:'AccountHome'
          Following is my setup:
          Machine A: exampleServer:7001 (admin server)
          Machine A: testServer1:8001 (Managed server)
          Machine B: testServer1_B:8001(Managed server)
          MyCluster : testServer1, testServer1_B
          Test Client:
          java examples.cluster.ejb.Client "t3://Machine A:8001"
          ======================
          Q1: Should I use 8001 or 7001 as cluster port number?
          Q2: What will happen when we click "apply" after select/unselect the server in
          the "target", "server" tab?
          Q3: And what will happen if we click deploy/undeploy check box in "configuration"
          tab of EJB item?
          Q4: I check the JNDI tree from all above three servers can't find out JNDI tree
          doesn't reflect the change I did in Q2 or Q3.
          Q5: What is the right way to deploy EJB components, should we select both cluster
          and server in the "target" tab?
          Q6: I got this message from one of the server when I try to undeploy/deploy ejb
          object.
          "examples.cluster.ejb.TellerHome_EO in the jndi tree is non clusterable
          and you have tried to bind more
          once? How could I make it clusterable?
          Q7: Undeploy and EJB doesn't work and sometime I still get " JNDI name in use"
          from the server.
          How could I fix it.
          Thanks


First I can tell you that the ports have to be the same, be on the the
          same network , i.e. Telnet into the other m/c. Next which you probably
          have done is the properties files. Per-cluster ...
          >>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<<
          On 6/7/01, 6:59:48 AM, "James Hsu" <[email protected]> wrote regarding
          Can't run the cluster example:
          > I would appreciate if someone can explanation my long list of
          questions regarding
          > the deployment of EJB in cluster environment.
          > I can't run the cluster EJB example( Teller/Account) in a
          cluster(contains two
          > server2). I always get
          > java.rmi.RemoteException: Unable to
          > resolve examples.cluster.ejb.Account
          > Home. Resolved: 'examples.cluster.ejb'
          > Unresolved:'AccountHome'
          > Following is my setup:
          > Machine A: exampleServer:7001 (admin server)
          > Machine A: testServer1:8001 (Managed server)
          > Machine B: testServer1_B:8001(Managed server)
          > MyCluster : testServer1, testServer1_B
          > Test Client:
          > java examples.cluster.ejb.Client "t3://Machine A:8001"
          > ======================
          > Q1: Should I use 8001 or 7001 as cluster port number?
          > Q2: What will happen when we click "apply" after select/unselect the
          server in
          > the "target", "server" tab?
          > Q3: And what will happen if we click deploy/undeploy check box in
          "configuration"
          > tab of EJB item?
          > Q4: I check the JNDI tree from all above three servers can't find out
          JNDI tree
          > doesn't reflect the change I did in Q2 or Q3.
          > Q5: What is the right way to deploy EJB components, should we select
          both cluster
          > and server in the "target" tab?
          > Q6: I got this message from one of the server when I try to
          undeploy/deploy ejb
          > object.
          > "examples.cluster.ejb.TellerHome_EO in the jndi tree is non
          clusterable
          > and you have tried to bind more
          > once? How could I make it clusterable?
          > Q7: Undeploy and EJB doesn't work and sometime I still get " JNDI
          name in use"
          > from the server.
          > How could I fix it.
          > Thanks
          [att1.html]

Can I run the currency translation for multiple years at the same time?

Dear Friends,
I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
Can I run the currency translation for multiple years at the same time ?
Note: The year is determined from the YEAR property of the "Time" dimension
appreciate any inputs,
thanks

You can run currency translation for multiple years.
I think the problem it is actually related to how you are sending the parameter to currency translation script.
Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
My expectation is that actually the script is called just with first year and that's the problem.
Log of script logic you can find it into:
C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
Regards
Sorin Radulescu

After upgrading to itunes 7.3.1.3 I can't run the backup to dics anymore.

After upgradeing to itunes 7.3.1.3.1 I can not run the backup any more. Also the CD burning runs very slow.
The DVD burner run ok with other software.
After it checks for file to be backed up it kept ejecting the blank DVD and asking for a blank disc.
I have even replaced the DVD drive with drive from another computer.I also reinstalled ITUNES once-- It ran as a repair during the install.

I have used this same DVD Burner to backup my list from within iTunes before. I did this back in June just after I purchase 30 songs. I think I was running version 7.1 or 7.2 when the DVD backup worked. If not sopport then why does their diagnostics say DVD/CD Diagnostics. Even so I have the same problem on my other PC with a CD Burner. I think Apple support sound a little like Microsoft. I once had a problem with Windows NT and had to call MS support 5 times before they said their software had a defect and issued a patch.

I have a pdf file with the added sounds, so I can not run the sound in adobe reader XI on my tablet samsung galaxi pro (android)

I have a pdf file with the added sounds, so I can not run the sound in adobe reader XI on my tablet samsung galaxi pro (android)

Thanks for writing to us. Unfortunately, such advanced javascript support is currently not provided by Adobe Reader for Android.
Thanks,
Adobe Reader Team

Can't run the powerpoint slideshow on macbook air (mavericks). It just says powerpoint encountered an error and needs to quit. any help would be appreciated.

I can't run the powerpoint slideshow on macbook air (mavericks). It just says powerpoint encountered an error and needs to quit, when I select the slideshow option. any help would be appreciated.

You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it.
You can include a link to this discussion.

Can I run the new Mac pro (6.1) with only one stick of ram?

Will that cause any problems. And if not how much will the overall quality be affected. it won't be a permanent solution, but for a few weeks at least. So can it happen? Can I run the Mac pro 2013 with only one memory stick?

Per this
http://blog.macsales.com/22745-mix-and-match-more-memory-faster-mac-pro-2
the 2013 Mac Pro is the only MP that can use a single stick of memory.

Help:How can I run the J2EE Client Application? Thanks

Help:How can I run the J2EE Client Application that will access the remote J2EE1.4 application server which runs on another host computer?
I have developped a stateles senterprise java bean name converter and deloyed it in the j2ee1.4 application server on the host machine A. The converterbean provides the remote home interface and remote interface. At the same time I have developped the j2ee application client named convertappclient. When I access the conveter bean at host computer A through the script 'appclient.bat' as 'appclient -client convertappclient.jar', the client can access the bean sucessfully. Now I want to access the bean through the script 'appclient.bat' at host computer B,what files should I copy from host computer A to host computer B;and what the command line should be like? Thanks!
The following are the code of the enterprise java bean and it's home interface .
The client code is also provided.
The enterprise java bean:
package converter;
import java.rmi.RemoteException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.math.*;
public class ConverterBean implements SessionBean {
BigDecimal yenRate = new BigDecimal("121.6000");
BigDecimal euroRate = new BigDecimal("0.0077");
public ConverterBean() {
public BigDecimal dollarToYen(BigDecimal dollars) {
BigDecimal result = dollars.multiply(yenRate);
return result.setScale(2, BigDecimal.ROUND_UP);
public BigDecimal yenToEuro(BigDecimal yen) {
BigDecimal result = yen.multiply(euroRate);
return result.setScale(2, BigDecimal.ROUND_UP);
public void ejbCreate() {
public void ejbRemove() {
public void ejbActivate() {
public void ejbPassivate() {
public void setSessionContext(SessionContext sc) {
The bean's remote home interface :
package converter;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
import javax.ejb.EJBHome;
public interface ConverterHome extends EJBHome {
Converter create() throws RemoteException, CreateException;
The bean's remote interface:
package converter;
import javax.ejb.EJBObject;
import java.rmi.RemoteException;
import java.math.*;
public interface Converter extends EJBObject {
public BigDecimal dollarToYen(BigDecimal dollars) throws RemoteException;
public BigDecimal yenToEuro(BigDecimal yen) throws RemoteException;
The j2ee application client:
import converter.Converter;
import converter.ConverterHome;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.rmi.PortableRemoteObject;
import java.math.BigDecimal;
public class ConverterClient {
public static void main(String[] args) {
try {
Context initial = new InitialContext();
System.setProperty("java.naming.factory.initial","org.jnp.interfaces.NamingContextFactory");
System.setProperty("java.naming.provider.url","jnp://10.144.97.250:3700");
Context myEnv = (Context) initial.lookup("java:comp/env");
Object objref = myEnv.lookup("ejb/SimpleConverter");
ConverterHome home =
(ConverterHome) PortableRemoteObject.narrow(objref,
ConverterHome.class);
Converter currencyConverter = home.create();
BigDecimal param = new BigDecimal("100.00");
BigDecimal amount = currencyConverter.dollarToYen(param);
System.out.println(amount);
amount = currencyConverter.yenToEuro(param);
System.out.println(amount);
System.exit(0);
} catch (Exception ex) {
System.err.println("Caught an unexpected exception!");
ex.printStackTrace();
}

Surprisingly I find an upsurge in the number of posts with this same problem. I recently found a post which gave a nice link for this. Follow the steps and it should help:
http://docs.sun.com/source/819-0079/dgacc.html#wp1022105

Can not run the J2EE application on webless iAS

Hi:
I have installed iAS on Salaris, and installed a webconnector on IIS which
hosted on different machine.
Now I can run the simple servlet sample, but I can not run the Helloworld
application that I deployed follow the guide. The error message was: socket
receive error (RecvBuffer 1)

Don wrote:
Hi:
I have installed iAS on Salaris, and installed a webconnector on IIS which
hosted on different machine.Wow, I did not know that iAS support IIS as the web server. I think SP3
will
allow you to use Apache as well as iPlanet's web server, but I not think
IIS is
supported. Perhaps you should use a supported web server.
Kent

Can't run the Installation Software for the LiDe 210, need a signed/verified copy???

Can't run the Installation Software for the LiDe 210, need a signed/verified copy???

Hi lanepoor!
So that the Community can help you better, we will need to know the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other details you'd like to give will only help the Community better understand your issue! Thanks and have a great day!

Can I run the DSCC ADS instance on a different port?

Similar Messages

Maybe you are looking for