Can I run these two display resolutions simultaneously?

My early 2009 Mac Mini (MB463LL/A) is currently driving a 24" Dell display through the Mini DVI port at a resolution of 1920 X 1200. I plan to extend the desktop with a 20" display running at its optimal resolution of 1600 X 1200.
I'm a little confused by the specs, however, which state that the Mac Mini "simultaneously supports up to 1920 by 1200 pixels on a DVI or VGA display… and up to 2560 by 1600 pixels on a dual-link DVI display using MiniDisplayPort to Dual-Link DVI Adapter…"
I understand about the adapters. What's unclear to me is whether these specifications refer to the total resolution split between two displays or the max resolution per display.
In other words, I'd like to run my 24" display at 1920 X 1200 and 20" display at 1600 X 1200 simultaneously. Can I?
Thanks.
Message was edited by: captainbligh

Yes. The specs are for each physical port individually.

Similar Messages

Can I open these two database simultaneously on a same system?

I have cloned the current database using Oracle EM Clone tool on a same WinXP system. Can I open these two database simultaneously on a same system? If can, How can Iogin to another database(cloned database)?

You should be able to start both databases if you did the cloning correctly.
EM use RMAN duplicate to clone database. It's basically created a AUXILIARY database and duplicate target database into it.
You must enter destination global name and instance name before proceed. What's instance name you entered?
set your ORACLE_SID to that instance name and login.

IMac can't running any two fire wire hard disks at the same time . which

iMac can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????
Message was edited by: KennyG1983

Hi KennyG1983-
How are you connecting these drives?
This may help: What to do if your computer won't recognize a FireWire or USB device
Luck-
-DaddyPaycheck

How can I combine these two DAQ tasks???

I am using LabVIEW 11, Windows XP, cDAQ-9174 chassis, two NI-9205 modules.
Please see my code for reference. I am very new so i will accept all suggestions.
I am acquiring 12 volatage signals in a producer/consumer structure giving me a queue of 1-d array of waveform(dbl). Then I am acquiring 12 voltage signals in another loop giving me 2-d array of waveform(dbl).
There is an issue creating the channels. How can I combine these two tasks?
Thanks,
~Chris
Attachments:
WaveTest_6.2.vi ‏558 KB

Hello chrisbe723,
When you say that there is an issue creating the channels, are you getting a specific error message when running your code? Also are you referencing the same set of channels for the two DAQ task you are configuring?
Paul-B
Applications Engineer
National Instruments

How can I get these two results in two different columns?

SELECT COUNT(attr_id)
FROM pv_attribute
WHERE port_id = 322;
SELECT COUNT(attr_id)
FROM pv_attribute
WHERE port_id = 323;
How can I get these two results in two different columns?
Thanks

So Jens made a tiny mistake with the column name... shame you couldn't be bothered to research Pivoting so you could have corrected the mistake (possibly it was deliberate *{:-) ) and learnt something.
with pv_attribute as (select 16123 attr_id, 322 port_id from dual union all
                      select 16123 attr_id, 322 port_id from dual union all
                      select 19223 attr_id, 322 port_id from dual union all
                      select 11193 attr_id, 323 port_id from dual union all
                      select 13163 attr_id, 323 port_id from dual)
-- end of test data setup
select sum(decode(port_id, 322, 1, 0)) cnt_322,
       sum(decode(port_id, 323, 1, 0)) cnt_323
from   pv_attribute
where port_id in (322, 323)

I am self employed and I want to be able to offer private tuition in PhotoShop and Illustrator, alongside Corel PaintShopPro and MS Office that I already teach. Can I get these two products, or all, at the 'educational' price?

I am self employed and I want to be able to offer private tuition in PhotoShop and Illustrator, alongside Corel PaintShopPro and MS Office that I already teach. Can I get these two products, or all, at the 'educational' price?

Not that I know. S&T pricing only applies to verified institutions. Could well be that you may need to fill out a paper with whatever governmental authority is responsible on the planet you live, but otherwise you're just a private business like any other and would most likely deduct the expenses from your tax bill...
Mylenium

I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.

I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.

iTunes Store > Purchased > Music > Not on this computer.
tt2

New 2015 MacBook Pro 13 Iris 6100 - can it run single 5k display?

Hello. I'm thinking about buying the new 2015 MacBook Pro 13-in with Retina Display with the new Intel Iris 6100 and pairing it with a Dell UP2715K 5k monitor to run 2560x1440 in retina mode.
The specs on the Apple.com website for the new MacBook say the following:
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 3840 by 2160 pixels on up to two external displays, both at millions of colors.
Although there's no mention of 5120 by 2880 support it can successfully run two 4k monitors simultaneously, which I would think is more demanding than a single 5k monitor.
Can anyone offer any insight?
Thank you.

Allright, it took me some time to figure out why the write and read speeds were lagging compared to numerous speed tests of rMBP 13" of same year and build.
During the setup process, when starting up your new rMBP the first time, you'll be asked whether you want to activate FileVault. I activated it.
As soon as you turn off FileVault and restart your mac and do the speedtest again, it should give better results. As shown in the screenshot you can see that my write and read speeds are now on par with the other speedtests on the internet. Both 1080p50 and 1080p59.94 formats at 12 Bit RGB are now checked.
Turning off FileVault solved this issue.
P.S. the whole thing about the NVMExpress only applies to the early 2015 12" MacBook. http://www.macrumors.com/2015/04/11/nvme-mac-os-x/

Can I run Radeon 4870 + GeForce 120 simultaneously

What seems like a pretty obvious question is one I can't find answered on the web.
I just ordered a Mac Pro with GeForce 120 as standard, and I also ordered a Radeon 4870 to install in it.
I'll put the radeon in the main slot and move the geforce into the 2nd slot.
Can I do this? Will both cards operate and allow desktop spanning etc?
Also, will the colour reproduction be the same across both screens? I will be running 2 x 24" LED displays.
Thanks in advance.
Scott

Wouldn't it be better to connect one to each card, therefore giving 512MB of RAM to each screen, rather than splitting the 512MB of one card amongst two screens?
The VRAM may be better utilized with two cards and two displays, but unlike Crossfire or SLI, you will not get the combined processing power of the two cards.
Many applications won't benefit at all from two layers of VRAM.
You will, in fact, be rendering all graphics with one card, with that card then passing the information onto the second card.
The VRAM on the primary card, as well as the GPU, are still going to be working as if two displays were connected to it.
What would cause a hit in performance?
In all practicality, Yes.
What all this means, in reality, is higher latency on the PCI bus while passing graphics from one card to the other, without any gains in processing from the second card.
In a dual display/dual card setup, this means one may actually lose performance as opposed to two monitors on a single card.
In a three monitor setup, well, these issues become moot out of necessity for additional display ports.
And to reiterate what Malcolm said, some applications may actually have trouble with dual card setups.
FCP is one known to have issues.

[SOLVED] Can't set X server display resolution

Hello all,
I'm trying to set X Server display resolution to my monitor native 1366x768. I'm running Arch in a VMWare virtual machine. I have installed xf86-video-vmware drivers.
Here's the contents of my 10-monitor.conf file
Section "Monitor"
Identifier "Monitor0"
DisplaySize 410 230
EndSection
Section "Device"
Identifier "Device0"
Driver "vmware" #Choose the driver used for this monitor
EndSection
Section "Screen"
Identifier "Screen0" #Collapse Monitor and Device section to Screen section
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24 #Choose the depth (16||24)
SubSection "Display"
Depth 24
Modes "1366x768" "1024x768" "800x600" "640x480" #Choose the resolution
EndSubSection
EndSection
And here's the log file where the resolutions get rejected:
2831.766] (II) vmwlegacy(0): Not using mode "1366x768" (no mode of this name)
2831.766] (II) vmwlegacy(0): Not using mode "1024x768" (no mode of this name)
Is this a consequence of the vmlegacy drivers? This is up high in the log file, where the legacy drivers eventually get loaded:
[ 2829.987] (II) LoadModule: "vmware"
[ 2829.988] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 2829.988] (II) Module vmware: vendor="X.Org Foundation"
[ 2829.988] compiled for 1.8.0, module version = 11.0.1
[ 2829.988] Module class: X.Org Video Driver
[ 2829.988] ABI class: X.Org Video Driver, version 7.0
[ 2829.988] (II) LoadModule: "vmwgfx"
[ 2829.988] (WW) Warning, couldn't open module vmwgfx
[ 2829.988] (II) UnloadModule: "vmwgfx"
[ 2829.988] (EE) Failed to load module "vmwgfx" (module does not exist, 0)
[ 2829.996] (EE) vmware: Please ignore the above warnings about not being able to to load module/driver vmwgfx
[ 2829.998] (II) vmware: Using vmwlegacy driver everything is fine.
[ 2829.998] (II) LoadModule: "vmwlegacy"
[ 2829.998] (II) Loading /usr/lib/xorg/modules/drivers/vmwlegacy_drv.so
[ 2829.998] (II) Module vmwlegacy: vendor="X.Org Foundation"
[ 2829.998] compiled for 1.8.0, module version = 11.0.1
[ 2829.998] Module class: X.Org Video Driver
[ 2829.998] ABI class: X.Org Video Driver, version 7.0
[ 2829.998] (II) vmwlegacy: driver for VMware SVGA: vmware0405, vmware0710
[ 2829.999] (--) using VT number 7
[ 2830.043] (II) Primary Device is: PCI 00@00:0f:0
[ 2830.043] (--) vmwlegacy(0): VMware SVGA regs at (0x10d0, 0x10d1)
[ 2830.043] (II) Loading sub module "vgahw"
[ 2830.043] (II) LoadModule: "vgahw"
[ 2830.044] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2830.044] (II) Module vgahw: vendor="X.Org Foundation"
[ 2830.044] compiled for 1.8.1.902, module version = 0.1.0
[ 2830.044] ABI class: X.Org Video Driver, version 7.0
[ 2831.763] (--) vmwlegacy(0): caps: 0x001FC3E2
[ 2831.763] (--) vmwlegacy(0): depth: 24
[ 2831.763] (--) vmwlegacy(0): bpp: 32
[ 2831.763] (--) vmwlegacy(0): vram: 18022400
Am I stuck to 800x600 in X Server when running Arch as a VMWare guest, or can I improve my situation?
EDIT: I have open-vm-tools installed and started through /etc/vmware-tools/poweron-vm-default.
Last edited by marfig (2010-08-05 02:40:23)

Ok. Finally it's working. This is why I love Arch. It forces me to learn.
The solution:
Step 1.
I followed the instructions in X.Org Wiki about obtaining modelines. Sadly, the log file didn't produce anything (probably because I was using the vesa vbe driver). But I followed the next option and got the modeline from Windows tool, Powerstrip.
"1366x768" 85.476 1366 1436 1579 1792 768 771 774 798 -hsync +vsync
Step 2.
Went to the web and fetched all the technical information about this monitor (a Acer X193HQ, that I use as my third monitor). I wanted hsync and vsync ranges, and display size in mm.
Step 3.
Edited my configuration file (/etc/X11/xorg.conf.d/10-monitor.conf) making sure to comment out the last part of the modeline, since I was going to manually add the hsync and vsync ranges.
Section "Monitor"
Identifier "Monitor0"
DisplaySize 410 230
HorizSync 30-80
VertRefresh 55-60
ModelName "X193HQ"
Option "DPMS"
VendorName "Acer"
ModeLine "1366x768" 85.476 1366 1436 1579 1792 768 771 774 798 # -hsync +vsync
EndSection
Section "Device"
Identifier "Device0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1366x768"
EndSubSection
EndSection
Step 4.
Success! X is started in 1366x768 with the vesa drivers with a 60Hz refresh rate.
Final thoughts
- With the vmware display drivers (xf86-driver-vmware) I don't get ideal results. For some reason it starts in 1368x768 (yes, 1368!). However xrandr reveals it supports 1366x768, and once I xrandr --size into it, all is fine. Dunno why this happens.
- It only works in 16 bit depth. 24 or 32 corrupt the screen. I don't know exactly why either. But for the use I plan to give the X server, 16 bit is fine.
Last edited by marfig (2010-08-06 00:02:24)

Can I run an external display off the new LaCie 2Big Thunderbolt.

I currently run FCP 7 on a brand new MacBook Pro. I use the Thunderbolt port into a Thunderbolt to VGA adapter (third party) to run an external Asis 27" display. It all works quite well. But...
Right now I use a LaCie d2 Firewire 800 external HD as my scratch but would like to upgrade to the new LaCie 2Big Thunderbolt. I want to then run my external display (still using the adapter) off the second Thunderbolt port on the 2Big. Is this possible? My local Apple authorized store was very sceptical although they had never tested it, in fact, they haven't even sold a 2Big yet.
Has anyone done this? Am I going in the right direction. I don't want to pop for the 2Big (+$500) and find out the setup can't be done.
Thanks

Yes, I've demo'd this a lot. Thunderbolt out of a computer, to the drive, looped to a monitor. AND!! Thunderbolt to an AJA IoXT for broadcast monitoring, back out to the drive, then the drive to a computer display.
Boggles the mind, but it works

I use Imax G4 10.4.11 and need to load Java 1.6.0_13 and Adobe Reader 9.4, but cannot on 10.4. Can I load these two items on your Firefox?

I need the Java and the Adobe in order to continue to use my Scottrade Investment account. My current safari Panther account will not accommodate these Java and Adobe upgrades. The Apple tech advised trying Firefox.

Firefox 3.5 is an antique version that is chock-full of security vulnerabilities.<br>
Firefox 3.6 also contains security vulnerabilities; it stopped being supported on April 24.
* [https://www.mozilla.org/security/known-vulnerabilities/ www.mozilla.org/security/known-vulnerabilities/]
If you can't run the latest version because your system doesn't meet the requirements, it's highly recommended that you use another browser that is secure. TenFourFox is a third-party build of Firefox that is kept up-to-date and runs on Mac OS X 10.4 and PowerPC Macs (as a side note, I've never seen the site go down; whatever problems James noticed 9 months ago must've been a fluke).
* [http://www.floodgap.com/software/tenfourfox/ www.floodgap.com/software/tenfourfox/]
If your system can run the latest version, but you want to downgrade because you've experienced problems, please start a new thread and someone will try to help you.
If you understand the security risks but want to downgrade anyway,
* Firefox 3.6: [http://www.mozilla.com/firefox/all-older.html www.mozilla.com/firefox/all-older.html]
* Firefox 3.5: [ftp://archive.mozilla.org/pub/mozilla.org/firefox/releases/3.5.19/ ftp://archive.mozilla.org/pub/mozilla.org/firefox/releases/3.5.19/]

Demantra - can it run with two Data Models in parallel?

Hello,
we face the following situation: we have items that have to planned on a daily basis; many other items, however, only need weekly planning.
Demantra only allows one base time unit in its data model. If we choose "daily" for all products, the system size will increase enormously.
If we choose "weekly" for all products, we can not plan our daily products for specific days in the week.
The idea is now to set up a Demantra System with two data models in parallel. Is this possible? Would they reside in different databases or database users?
The Business Modeller allows to create new models, but can they run in parallel? If they can, how would the user access the different data models?
Thanks for any hints on this!

Can you please elaborate on this issue?
Thanks

Can I add these two VWIC2 modules on a Cisco 2801?

Hello all,
Can I add both of these modules on a Cisco 2801 running 12.4(3h)?
VWIC2-2MFT-T1/E1
and
VWIC2-2MFT-G703
Thank you,
Nadeem

Thanks for the response, but it doesn't really address my question(s).
Obviously, if I were buying memory for the old iMac, I would buy the same speed as the one already in it. However, I am not buying memory, I already have this spare faster memory. Let me split the question in two:
1. Will the faster memory work on the slower iMac?
2. Can the faster memory damage the slower iMac?

Can aT30 run with two monitors , each monitor running a different application

Hello,
I have aT30 (model 2366 n6g) connected to a docking station.
the graphics system is ATI mobility radeon 7500 16mb ddr 4x AGP
On the back of the docking station there is of a VGA and a DVI connection;
When I connect two monitors to the docking, it displays the same screen. The laptop is not recognizing the second screen, so I can extend it in order to receive two different screens. Can anyone advise?

download the Omega Catalyst ATI driver, it should allow you to control the display setting a bit better. You should able to use the software to control the extended display property.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Can I run these two display resolutions simultaneously?

Similar Messages

Maybe you are looking for