Can I run two copies of FrameMaker at the same time?

I am trying to learn Structured FrameMaker. Is it possible/legal/safe to start two copies of FrameMaker on my PC at the same time?
Specifically I want to have one copy open in Structured FM to experiment and the other copy in Unstructured to take notes on what I am learning. I am trying to see if I understand the concepts by writing up a tutorial but I do not want to be locked into structured mode when do not have a template which covers all of my needs ( I am still figuring them out) and I do not yet really understand what the structured templates do.
Will the documents save by the rules of the window they are in? What other problems will/could I encounter?
Thanks,
Marjorie

Marjorie,<p>If your machine has sufficient disk space and memory, yes, you can run multiple copies of FrameMaker at once. To run the different user interfaces at the same time, you'd have to start both copies. Then, change the user interface in one copy. Since the change doesn't take affect until you restart FrameMaker, shut down that copy and start a new one (leaving the first user interface in effect in the other original copy.<p>All that said, I suspect you can do the testing you want in one copy of FrameMaker, using the Structured FrameMaker user interface. The structured user interface simply means you can work with structured documents; you can also work with unstructured documents. Each document is independently structured or unstructured; in fact, each flow is independently structured or unstructured. You might therefore consider using the structured user interface and opening one structured and one unstructured document in a single copy of FrameMaker. Or create a single document with side-by-side flows and put structured content in one and unstructured content in the other.<p>Just remember that some of the dialog boxes are slightly different in the two user interfaces. For example, the marker, anchored frame, insert table, and cross-reference dialog boxes all let you select an element tag. Since there are no element tags in an unstructured flow, the element tag text boxes in these dialog boxes shows <Unstructured>. If you are willing to ignore these differences, I recommend you do your experimentation in a single copy of FrameMaker.<p>--Lynne

Similar Messages

Can I run two instances of mail at the same time?

To avoid accidentally sending an email from the wrong account, I want to use an email program (that can access an Exchange account) "dedicated" to just that account. To do this, I think have to use either Mail or Outlook. I don't have Outlook, and use Mail for my other accounts.
So, can I duplicate the Mail program (on another of the internal drives if that would help) and use it exclusively for this one account or would it screw everything up?

In that case the only other way I know you can do it is to set up an alternative user account on the mac, which will give you two separate instances of Mail (the one you already have and a new one in the new user account).
To do that, go here
 > System Preferences... > Users & Groups
and create a new user by first clicking the padlock at the bottom, entering your password, and then clicking the '+' button just above the padlock. Fill out the account details and enable 'fast switching' in the options so you can easily switch between the two mac user accounts.
Log in to the new user's account and create the work email account in Mail.

How can i run two iphone 5 sims at the same time?

I have 2 iphone 5 sim cards, one for business and one personal. Is there a way to run both on one phone? also be able to accept calls from either sim?
Thanks.
Tim

Does anyone have any experience with the Magic-sim elite? It's a strip that fits inside any iphone case as far as I can see. £24.95 in the UK.
http://www.magic-sim.com/product/id/15/MAGICSIM_ELITE_-_iPHONE_5_DUAL_SIM_ADAPTE R.html

Can you use two duetts on logic at the same time

can you use two duetts on logic at the same time so i can have inserts

tracktor wrote:
can you use two duetts on logic at the same time so i can have inserts
Before going ahead on this you should definitely check with Apogee as I think they do not recommend using their interface(s) in an Aggregate device.
Maybe that's changed.. not sure.
pancenter-

Can you run Edirol / Focusrite firewire interfaces at the same time?

Hey Guys,
I have an Edirol FA-101 but i'm just about to get a Focusrite Saffire (or maybe a Motu 8pre...haven't decided yet) and was wondering if I can run the 2 interfaces at the same time for more inputs...i know i can chain 2 of the edirol ones but i'm not sure if it works with different makes.
Thanks

so I actually did get myself a focusrite saffire pro 26 and it's pretty cool (apart from the focusrite computer side interface that seems to have a few bugs when you control by hardware...)
I'm probably gonna get myself an octopre or a twintrack pro to make use of at least some of the extra digital inputs but for now I have the semi redundant Edirol FA-101 in my rack, if I can get the two working together then that's great!
I have tried what you said and it did pair them together however it made a really awful noise when trying to record, just intense digital distortion and i'm not really sure why. I'm running it all from a macbook pro with only one FW port (that has the Saffire / Edirol / FW Hard drive / Liquid Mix running from it in that order) do you think this order is more the problem?
Dave

I can't run LR5 and EOS utility at the same time

I'm running Mac OS 10.9.5, LR5.7 & Eos Utility 3.
I can't run LR and Eos3 at the same time. Eos just crashes and have to force quit Eos.
Any tips anyone?
Do I have to downgrade to Eos2. Not a problem really I suppose.

LR supports tethering using a Canon DLL and EOS Utility probably also supports tethering or at least uses something from a similar Canon DLL. You probably cannot have two different versions of that DLL loaded at the same time, so it makes sense there are problems.

How to run two versions of dreamweaver at the same time

How to run two versions of any dreamweaver at the same time?
There must be a way to do this.

east99 wrote:
> How to run two versions of any dreamweaver at the same
time?
> There must be a way to do this.
Yes, there is: on two separate computers.
You cannot run two versions of Dreamweaver simultaneously on
the same
computer. They can coexist side by side, but the operating
system will
not let you run them together.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Can I have two versions of firefox at the same time?

Hi,
Probably a dumb question but can I have two versions of Firefox on my system at the same time?
The reason is because of Add Ons that are not compatible with v4. I'd like to be able to close v4 when I need to use an Add On in v3.
Thanks.

You can install them both but there are a few steps to take.
When you install Firefox 4 use the custom installation option and choose a different location to install Firefox.
In order to use both versions, you need to create a new profile for Firefox 4 (Firefox stores user data in the profile). Using the same profile with different versions can cause problems. Once you create a new profile you can copy certain data such as bookmarks and passwords between them. You can also use Firefox Sync to keep the profiles synchronized. Finally, you will need to set up shortcuts to launch the correct profile for each version.
The following links show how to do this:
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
* https://addons.mozilla.org/firefox/addon/firefox-sync (only needed for Firefox 3.6, it is built into Firefox 4)

Can't run wiki and web services at the same time?

I'm a newbie with Lion Server, but I've been running several web sites successfully for about 6 months. I'm up to Server 10.7.4.
I've been trying ever since the first installation of Server to get the wiki service running. I had absolutely no luck until I turned OFF the web service (always got the "URL does not exist" error when I tried to create a group wiki from inside the Server app). With the web service off, it all starts up fine and I created my first wiki (woohoo). Turning web service back on kills access to the wiki. I don't find reference to this in any of the dicussions, and especially not in Apple's documentation.
Are the Wiki and Web services mutually exclusive? Or is there a way around this?
I'm using Dyndns to provide me with sub-domains to use, and I've dedicated one of them to the wiki service. Traffic comes in on port 8080, where my web sites are on port 80.
Thanks for any pointers...
edbok

LR supports tethering using a Canon DLL and EOS Utility probably also supports tethering or at least uses something from a similar Canon DLL. You probably cannot have two different versions of that DLL loaded at the same time, so it makes sense there are problems.

How can I get two cameras to aquire at the same time rather than one after the other

I've got (2) PCI-1428 cards, Two Uniq Vision cameras with power supplies, cameralink cables, and IMAQ-D6804 cables. Both cameras are being triggered by the same switch, but they are not grabbing images at the same time. Right now it is triggering one camera as desired, but the other doesn't aquire until after the time-sensitive event. On the next test, the two camera will trade these roles. I am using 2 cards, so they should acquire at the same time. How do I change it so that they grab images at the same time? Thank you for your help.
Deater

Hi Deater,
Thank you for your post. Triggering from two cameras at the same time may be a little trickey, but it can be done. There are multiple ways to tackle this problem. If you have a RTSI cable, you can RTSI the two PCI boards together internally to lock them in HW. You should also be able to use the triggering line on each board.
One of the best methods for triggering multiple boards is called GenLocking. The following Developer Zone page describes GenLocking more fully and has several examples to help you out: http://zone.ni.com/devzone/conceptd.nsf/webmain/a387b5c0ac6f6f4e86256c87005fcddf.
The "HL Grab with two boards.vi" shipping example is also a good example of the code needed to trigger two individual boards in LV. I found a similar post that may be of some help as well: http://forums.ni.com/ni/board/message?board.id=230&message.id=2691&requireLogin=False
Hope this helps!
Thanks,
Scott Savage
National Instruments
Applications Engineering
www.ni.com/support

I seem to be running two versions of firefox at the same time help!

I seem to be running an older version and a new version of firefox at the same time. I run the new version from startup (it forgets previous tabs from last session) and this sadly does not let me use back and forward arrow buttons so its a bit useless. Strangely when I pop an email window up, the older version of firefox appears with the last few tabs I had browsed.
disabling plugins stops browser starting in new version and back and forward arrows work ok.
any help much appreciated!

You can install them both but there are a few steps to take.
When you install Firefox 4 use the custom installation option and choose a different location to install Firefox.
In order to use both versions, you need to create a new profile for Firefox 4 (Firefox stores user data in the profile). Using the same profile with different versions can cause problems. Once you create a new profile you can copy certain data such as bookmarks and passwords between them. You can also use Firefox Sync to keep the profiles synchronized. Finally, you will need to set up shortcuts to launch the correct profile for each version.
The following links show how to do this:
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
* https://addons.mozilla.org/firefox/addon/firefox-sync (only needed for Firefox 3.6, it is built into Firefox 4)

How many computers can we run our license for LabVIEW at the same time?

We have LabVIEW 8.2 and we need it to operate on several machines at the same time. How can we do this? Can we check to see if our current license allow us to do this?

Are you talking about developing code on multiple machines or just running programs? If you build your applications into an executable you can deploy those to any machine without buying anything else. If you need the full development environment on each machine but will not be doing development on them look for something called a Debug License.
=====================
LabVIEW 2012

Can you run 7 and 6.5 at the same time?

Since one of the key features I use is missing in version 7 (duration of a selection) I'm wondering if I can somehow run 6.5 along with V7 and, if so, how this would be done.
Thanks!
Rusty

I use both (6.5.2 and 7.0.3) on my Mac mini.
You can only have one "install" of QT on the machine but you can use the QuickTime Player from both versions at the same time.
Version 6.5.2 will run "on top" of the version 7 "framework". You'll have all of the "old" menus when you use it. But you'll also have access to the new H.264 video codec.
Find a copy of QuickTime Player (maybe a back up or a different machine) and place it on your Desktop.

How can I Resize Two or More Shapes At The Same Time?

I've got text over a rectangle over another rectangle. When I change my text, the size of the boxes needs to change and it's a drag ot have to do each one separately and constantly realign. Is there a way I can resize both of them at the same time tokeep the proportions the same?
Or is there a way I can enter #s to resize, so I could just enter the same #s for each shape?
Thanks,
Amanda

Here's an example of what Wyodor is referring to: text in shapes within another shape.. It goes one step further and adds the first shape+text into another shape but the concept is the same.
OT

Running two instances of kopete at the same time?

I have 2 MSN Messenger accounts and want to login to both of them at the same time.
Obviously running them both from the my single user doesn't work. and I don't want to run one of them as root. (altho it does work.) I also tried creating another user just for this purpose and running kopete via 'su user2', and it doesn't work. I also tried gksu and no luck.
any suggestions?

well it is possible, and it is the best solution, but as a side note, to get X applications running as another user you need to:
userthatisrrunningX@myhost ~ xhost +localhost
otheruser@myhost ~ kopete
if you want to run something as root the prefered way to do this in kde is to use kdesu..

Can I run two copies of FrameMaker at the same time?

Similar Messages

Maybe you are looking for