Can I run two DSL lines into my airport network?

I have a 1.5M line from Qwest and can not get faster speed from anyoe else in my semi-rural community. Can I run two 1.5 DSL lines into one or two airport extremes and get the equivalent of a 3.0 line?

If I have two DSL lines each connected to its own Actiontec modem with each modem connected via ethernet to its own airport extreme then it sounds like I need to have two wireless networks to take advantage of the second DSL connection. Correct? We have a lot of computers being used in the household so could put the kids on their own network.
Apparently the airport extreme can not manage a network with two internet connections even if they are connected via separate airport extremes? I have worked at companies that have done this for internet connection redundancy purposes so there must be devices that can handle this.
Message was edited by: David in Colorado
Message was edited by: David in Colorado

Similar Messages

  • How can I combine two itunes accounts into one?

    How can I combine two itunes accounts into one?

    Items purchased from the iTunes Store are permanently associated with the account from which they were originally purchased.  Apple provides no way to change this.
    However, if you wish to put content from two accounts into a single iTunes library, you can easily do so.  Use the command File > Add File (or Folder) to Library.

  • Can I have two phone lines on my iPhone 4G (one for biz and one for personal calls)?

    can I have two phone lines on my iPhone 4G (one for biz and one for personal calls)?

    FWIW, from my experience I was not able to get this to work.  When I conected a second bluetooth audio device the first device disconnected.

  • Can I run two thunderbolt display monitors off of my new 27" iMac?

    Can I run two thunderbolt display monitors off of my new 27" iMac?

    Yes, the new iMac has two Thunderbolt ports. Plus Thunderbolt can be daisy chained thru external Thunderbolt drives and displays that have multiple ports.
    For more info, see >  Apple - Thunderbolt: Next-generation high-speed I/O technology.
    Although I'm not sure exactlly what Arrangement selections you will be offered in the Displays Preference, because I have not tested that setup myself...

  • Can I run two 30 inch displays ???

    My Quad (Late 2005) has a GeForce 6600 256mb video card.
    Currently I am running one 30 inch. I have hooked up a second 20 without a problem.
    Can I run two 30 displays on the same card?
    Or do I need to add a second video card to the machine??

    Of the cards originally available for the Quad, only the nVidia 4500FX could support two 30" displays.
    Your best option is to get the newly released ATi X1900 G5 edition. It will support two 30" displays and is considerably faster than the 6600 you have in there now.
    Note: This is not the same X1900XT that's on the Apple Store. That one is for the MacPro only and will not work in a G5 (even though they're both PCI-e). OWC has the G5 version for sale here: http://eshop.macsales.com/item/ATI%20Technologies/100435854/

  • Can I run two Apple TV units off a single account on separate devices

    Can
    I run two Apple TV units off a single account on separate devices

    Yes you can do that.

  • Using `n how can i add two empty line (two carriage return), between these two lines in the output file?

    hi friends
    using `n   how can i add two empty line (two carriage return), between these two lines in the output file?
    PS C:\> $env:COMPUTERNAME | add-content c:\file.txt
    PS C:\> $Env:USERDOMAIN  | add-content c:\file.txt
     i tested "$env:computername`n`n`n$env:userdomain" | add-content c:\file.txt   but it results in 
    myPCMyDomain
    but i wanted the contents of the output file be like this:
    MyPC
    #empty line here 
    #empty line here
    MyDomain
     i tested many other forms but didn't work.
    thanks

    I tried it, as well. The line breaks were respected in the PowerShell console, Programmer's Notepad, and Word; they weren't in Notepad.
    You are using a Unicode file.  Locale is what?
    If you just want notepad compatible line breaks then do this:
    del file.txt ; "$env:computername`r`n`r`n`r`n$env:userdomain" | add-content file.txt ;notepad file.txt
    Look in hex to see that `n is ^L or 0xA and is only one character.  CrLf is 0xD 0xA - two characters.
    My programmers editors and VS all understand a single ^L as a line break so does PowerShell.  Only DOS/Notepad and other utilitis don't understand this..
    ¯\_(ツ)_/¯

  • Can i run two widgets at the same time on the same page?

    Can i run two widgets at the same time on the same page?
    Hi
    I have created and published 4 free ibooks and i would to run two widgets
    - a countdown clock
    - a review test
    at the same time on the page. Can i do that?
    Thanks in advance
    Haris

    thanks for your answer. Yes indeed HTML widgets run only full screen (snif snif). I consider this as a "distinguishing treatment".
    One solution  i read !!!!! was to create through keynote a countdown clock, to export to quicktime move and to imported at iBA predefined widgets. of course this is not the solution i need.
    So, in order to have at the same widget and run together a count down clock and a preview test (20 questions)  i must
    1)"hack" the preview widget and insert a countdown clock
    2) create a preview test using iAD.....
    thanks again
    haris

  • Can you run two separate vi's in parallel

    Can you run two seperate Vi's in parallel? Will this make response considerably slower? 
    Solved!
    Go to Solution.

    eugeniap wrote:
    Hi, what more detail is needed? They are two entirely seperate independent vi's with no shared sub vis.
    I just wanted to know if you can run two independent vi's at the same time, as in just have two seperate programs and run them.
    Separate isn't the same as independent.  That's why they wanted more information. 
    Your second question asked about slowed response.  That's another place you didn't offer anywhere near enough information for a true answer.  How many loops are you running in each of these independent VIs?  How many cores does your processor have?  Are you including a 0ms wait in your loops to avoid railing your processor?
    It's possible you'll see such a negligible change in processing that you won't notice.  It's also possible you'll feel like you're draining your system.  It's generally best to err on the side of too many details rather than too few when you're asking questions.  If you don't know the answer, you likely don't know how each piece plays a part in the answer.  More information allows others to pick out the relevant pieces and give you a better answer.

  • Can I run two seperate PID functions in one VI

    I need to controll two different valves. THey must be run by a PID function. Can I run two seperate PID modules? If so do they need to be in the same while loop?
    Solved!
    Go to Solution.

    Hi,
    yes, you can run 2 PID functions in one VI.
    No, they don't need to be in the same loop.
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Can I run two separate versions of the LabVIEW Run-Time Engine on one PC?

    Hello, I am curious if anyone knew if it is possibly to install and use two separate versions of the LabVIEW Run-Time Engine on one PC?  I currently have the 2009 Run-Time Engine installed on one machine and wanted to install the 2011 Run-Time Engine as well. I know that you can run two separate versions of the LabVIEW program on one machine, but what about the Run-Time Engine?
    Thanks!
    Solved!
    Go to Solution.

    I'm guessing this is a bug that NI needs to fix.  I see no reason you shouldn't be able to install the run-time engine of an older version.  I'd be interesed in if it allows you to install the older development environment, which also includes the older run-time engine.  There are some command line switches for NI installers as mentioned here:
    http://digital.ni.com/public.nsf/allkb/C361087EE9F20810862577850073128E
    I wonder if there is a force install option.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • Can I run two big external monitors on my 2012 MacBook Pro?

    I understand that my NON-retina 2012 MBP can be set up to drive two Apple Thunderbolt Displays, but am I out of luck on driving two generic 27" DVI or HDMI external monitors?
    Boring details: I've just bought a mid-2012 MBP, with a quad-core i7 and 16 Gb of RAM plus the high-end GPU w/ 1GB of video RAM, but non-retina. I'd like to run two external 1080p or DVI HD-equivalent monitors (I have several new Samsung 27-inchers). I can live without the laptop 15-inch screen while I'm doing it!
    I know that the retina MBP has two Thunderbolt ports, plus a DVI port, which would have easily given me what I need. However, I didn't get the retina MBP because it's totally non-upgradable by a user. There were a couple of other potential additional issues, including some reported problems installing Windows into Parallels via external DVD player. There's also the $mid-3000's price for retina, tricked out the way I'd like... Tradeoffs! At least I still have Firewire.
    The two big externals help a lot with video editing. Even with my old G5 PowerMac, you could immediately drive two 1080p-equivalent displays. I expect that someone will release a much-more powerful solution than the Matrox USB 2 screen driver dongle, etc., sometime soon, using "superfast" USB 3, but I'll lose one of my two USB 3 ports; I'll want to have 'em both free for other externals, I'm sure.
    Thoughts and/or solutions?

    For those following this thread...
    There is a posting elsewhere here in Discussions that describes how to get two large external monitors running on a recent Macbook Pro by using only ONE Apple Thunderbolt Display, then daisychaining a LaCie Thunderbolt drive after the T-Bolt display, and this allows adding another large DVI display in the chain after the LaCie.
    Still pricey, since it does involve buying one Apple Thunderbolt Display, plus a LaCie drive, and cables, plus the DVI display, but it's around half a thousand dollars cheaper than two Apple T-Bolt displays, plus you have a very fast LaCie external drive.
    Still not what I'm looking for, but if you're interested, here's a link...
        https://discussions.apple.com/message/18391941#18391941

  • How can I run two DML in one FORALL statement?

    How can I run 1) select 2) update in one FORALL for each item as below?
    OPEN FXCUR;
      LOOP
            FETCH FXCUR BULK COLLECT INTO v_ims_trde_oids LIMIT 1000;
            EXIT  WHEN v_ims_trde_oids.COUNT() = 0;
         FORALL i IN v_ims_trde_oids.FIRST .. v_ims_trde_oids.LAST     
              SELECT EXTRACTVALUE(XMLTYPE(CNTNT),'/InboundGTMXML/ProcessingIndicators/ClientCLSEligibleIndicator')        INTO v_cls_ind
              FROM IMS_TOMS_MSGE  WHERE ims_trde_oid = v_ims_trde_oids(i);
             IF v_cls_ind      IS NOT NULL THEN
                      v_cls_ind       := '~2136|S|'||v_cls_ind||'|';
             UPDATE ims_alctn_hstry  SET CHNGE_DATA_1   =concat(CHNGE_DATA_1,v_cls_ind)
             WHERE ims_trde_hstry_id = (select max(ims_trde_hstry_id) from ims_alctn_hstry where ims_trde_oid=v_ims_trde_oids(i));
             DBMS_OUTPUT.PUT_LINE('Trade oid: '||v_ims_trde_oids(i)||'   CLS Eligible Indicator: '||v_cls_ind);
          END IF;
      END LOOP;
      CLOSE FXCUR;Your help will be appreciated.
    Thanks
    Edited by: PhoenixBai on Aug 6, 2010 6:05 PM

    I came through this forum while googling on the issue of 'using two DML's in one FORALL statement.
    Thanks for all the useful information guys.
    I need to extend this functionality a bit.
    My present scenario is as follows:
    FOR I in 1..collection1.count Loop
         BEGIN
              insert into tab1(col1)
              values collection1(I) ;
         EXCEPTION
              WHEN OTHERS THEN
              RAISE_APPLICATION_ERROR('ERROR AT'||collection1(I));
         END;
         BEGIN
              UPDATE tab2
              SET col1 = collection1(I);
         EXCEPTION
              WHEN OTHERS THEN
              RAISE_APPLICATION_ERROR('ERROR AT'||collection1(I));
         END;
    commit;
    END LOOP;
    I need to use the FORALL functionality in this scenario, but without using the SAVE EXCEPTIONS clause keeping in mind that I also need to get value in the
    collection that led to the error.Also, the each INSERT statement has to be followed by an UPDATE and then the cycle goes on(Hence I cannot use 2 FORALL statements for INSERT and UPDATE coz then all the INSERT will be performed at once and similarly the UPDATEs). So I created something like this:
    DECLARE
    l_stmt varchar2(1000);
    BEGIN
    l_stmt := 'BEGIN '||
              'insert into tab1(col1) '||
              'values collection1(I) ; '||
         'EXCEPTION '||
              'WHEN OTHERS THEN '||
              'RAISE_APPLICATION_ERROR(''ERROR AT''|| :1); '||
         'END; '||
         'BEGIN '||
              'UPDATE tab2 '||
              'SET col1 = :1; '||
         'EXCEPTION '||
              'WHEN OTHERS THEN '||
              'RAISE_APPLICATION_ERROR(''ERROR AT''|| :1); '||
         'END;'
    FORALL I in 1..collection1.count
    EXECUTE IMMEDIATE l_stmt USING Collection1(SQL%BULK_EXCEPTIONS(1).ERROR_INDEX);
    END;
    Will this approach work? Or is there any better aproach to this? I am trying to avoid the traditional FOR ..LOOP to achieve better performance of query

  • Can we run two instances of solaris in 1 hardware (SunFire Server)

    Hi,
    There is a need for us to run two instance of Solaris in SunFire Server.
    Because we need to install Domino Servers in a Single Hardware.
    The hardware consist of Eight Processors.
    How to allocate the resource in such a way that the Domino Server should take 4 Processor and other application should take other four.
    Please be in more detail.
    Regards,
    C.Kumanan

    "Sunfire" is a product line that includes many different computer designs
    and many different capabilities. You will need to be more specific as to what model you actually have.
    The Sun Fire Midrange Systems are hardware designs that can be configured
    to run discrete domains in the same overall chassis.
    So, for those systems the answer to your question would be "Yes".
    For any Sun Fire computer syustem that is smaller than the Midrange systems,
    the answer to your question would be "No".
    So ... A Sun Fire 3800 with eight processors ??? "Yes"
    However, a Sunfire V880 with eight processors ??? "No"
    Any other configuration questions of the actual Solaris instance,
    such as Zones or processor thread affinity are outside the scope of this forum.
    Those issues would be discussed better in an OS forum.

  • How can I run two different versions of Firefox, the latest does not work with an important site I need to use?

    With the latest version of Firefox I cannot send "Quick Mails" to my students using the college's ANGEL system. I had to uninstall it and go to an earlier version. I prefer the newest rev.
    Any way to run two different versions. It does not have to be simultaniously. Seems to be a problem on both my Mac and XP systems.
    Thanks,
    Kim

    Currently I don't think there is a way to run two version of firefox at the same time. But you can install Firefox Beta or Aurora instead (which is build for future release for firefox) and help test it! Here's the link:
    http://www.mozilla.org/en-US/firefox/channel/

Maybe you are looking for