Can I run VSS over Single-Mode fiber long range?

So I have 2 Cat 6509 currently in the same room and I use VSS. I would like to split these 2 switches up geographically on the campus and they would be approximately 2500' apart. I plan to user single-mode fiber with 2 10G LR links on each switch. Any help would be appreciated!

As Leo also noted yes that will work fine. It doesn't matter what optic (LR,SR, etc) you use as long as the VSL comes up you are fine
what you have to be care full with is that now you have to use single mode for one of the uplink ports coming from your access switches
HTH

Similar Messages

Can't Run program in Debug Mode

To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------

Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada

Mountain Lion broke vectordesigner 1.7.0. Can I run it in compatibility mode to Lion?

Hi,
if anyone could help? Mountain Lion broke vectordesigner 1.7.0. Can I run it in compatibility mode to Lion?
I can not update to version 1.7.3 because it has been removed from the app store.
Regards
Steffan

There isn't a "compatibility" mode.
According to Roaring Apps compatibility table, neither version works with Mountaion Lion.
http://roaringapps.com/apps:table/tags/_v/index_tags/_v

Transitioning to Single Mode Fiber

Hello,
We need to install new fiber to some new buildings in our school district. I want to be able to use current switches that I have in the old portable buildings that will be turned down this summer. My idea was to use Single Mode Fiber for these new buildings as long as the speed between the IDFS and MDFS is 1GB.
So I assume I need new transceivers ? Which ones will work with the models below mentioned?
My "Corebuilder" is WS-C4506 and my switches are 3750G 24 ports.I only need 6 transceivers, 3 for the WS-C4506 and three for 3 switches.
Eventually when we replace the switches then we'll go to 10GB but then I will need 10Gb transceivers but that will be another project for another day, I guess.
Any help will be much appreciated.

We need to install new fiber to some new buildings in our school district. I want to be able to use current switches that I have in the old portable buildings that will be turned down this summer.
What is the distance of the single-mode cable?
My "Corebuilder" is WS-C4506 and my switches are 3750G 24 ports.I only need 6 transceivers, 3 for the WS-C4506 and three for 3 switches.
Part number is: GLC-LH-SMD
You will also need to get SM patch cords.

I keep getting message "This page requires a plugin that can only run in 32 bit mode" what does this mean and how can I fix it?

I keep getting message "This page requires a plugin that can only run in 32 bit mode" what does this mean and how can I fix it? It seems to come up randomly, but I'm fairly ignorant.

Previous versions of Firefox were only 32 bit, Firefox 4 for the Mac contains 32 and 64 bit versions. If you want to always start Firefox in 32 bit mode, open up Finder and go to the Applications folder. Control-click the Firefox app and click "Get Info", then select the "Open in 32-bit mode" option.

SFP with LC connector to be used with SC single mode fiber termination (Cisco2960S)

Hi,
I have a question for a Cisco CATALYST WS-C2960S-24TS-L with SFP GLC-LH-SM (LC connector).
The problem is that we have an SC single mode fiber termination.
Is there any chance to provide with an SFP with SC connector. In case not, what alternatives do I have? Is there any Cisco recommended SC-LC converter/cable?
Thanks a lot for help,
Dario

You could get a fibre patch cable with LC terminal ends.

Error message says "This page requires a plugin that can only run in 32-bit mode"

When I try to write an email from my BT site I get the following message
"This page requires a plugin that can only run in 32-bit mode"
Then there's a link to restart the page in 32-bit mode. However, it resets to whole page, drags things back out the trash.
I have only had this problem since updating to the latest Firefox

Previous versions of Firefox were only 32 bit, Firefox 4 for the Mac contains 32 and 64 bit versions. If you want to always start Firefox in 32 bit mode, open up Finder and go to the Applications folder. Control-click the Firefox app and click "Get Info", then select the "Open in 32-bit mode" option.

Connecting a 100 Base FX transceiver to single mode fiber

I'm looking to connect to an ISP circuit. The fiber run is single mode and they have a 100 Base FX transceiver on their end.
I've looked up the specifications on that transceiver and it say's it should only be run on SMF.
Anyone had any success with this?

You're welcome.
For a VERY short run your MIGHT be able to get a SM transceiver to work over MM fiber.
The coherent light ("single mode") from the laser that launches into much larger core of the multimode fiber (usually 50 or 62.5 microns vs 9 micron for SM and having different propagation and dispersion characteristics) may "punch through" over short distances.
I wouldn't do it in any production environment though as it would likely be unstable in the long term (and is definitely not how the equipment is designed to work).

How many sessions can you run on a single PC?

I have a user who insists that they need to be able to run multiple sessions of MS Dynamics AX 2012. Now they are complaining because they can only run 3 sessions instead of 4.
Is it advisable to run multiple sessions of DAX on a single computer?

Hi,
this forum is about Dynamics CRM, for Dynamics AX post your questions here:
https://community.dynamics.com/ax/f/33.aspx
My blog: www.crmanswers.net -
Rockstar 365 Profile

Satellite L300D-11V: can I run SSD in AHCI mode?

Hi,
I've just installed an SSD and Win7 64bit on a L300D-11V laptop.
Does anyone know if it is possible to run this in AHCI mode as I can't see the option in the BIOS?
I see there is a BIOS update but if this doesn't update to enable AHCI I'd rather not bother...

Hi
I presume it should be possible to use the SSD drive with AHCI enabled mode.
The AHCI means that the HDD or SSD would run with SATA performance but for that you will need to install the SATA driver firstly.
If SATA mode would be set to compatible mode then a SATA driver is not necessary to install the Windows OS.
Simply said;
- you dont need SATA drivers using compatible mode
- you need SATA drivers using AHCI mode
The SATA drivers are a part of the Intel Storage Manager and you could download this from Toshiba European driver or Intel page

Can Safari run in 32-bit mode on Lion?

I have a Safari plugin that needs to run in 32-bit mode. This worked in Snow Leopard with Safari 5.1. I am unable to find out how you would put Safari into 32-bit mode on Lion. My suspicion is that this is not possible but I do not know for sure. Can someone shed some light on this?
Thank you.

Answering my own question, yes it can. The 32-bit mode wasn't showing up before but now it is.

Single mode fiber to Multimode SFP

Kindly check diagram..is it working in live environment?
two buildings connected with Single mode OFC...on both side LIU SC Connector (Single mode) -- On both end we have to connect Router/ Firewall - both have Multimode SFPs.

Won't work.
If your fibre run is SM then your SFP on your firewall should be SM.

Running BAPI_SALESORDER_CHANGE over many orders takes long time

Hi,
I'm using the bapi BAPI_SALESORDER_CHANGE to change orders, and it works well.
I'm using this bapi to change some orders all at once. Therefore I put it into a loop.
When I run my code over all orders that created in one day, it takes about five minutes, but when I run it over all the orders that created during one week, it takes many hours.
Can someone please explain to me what the reason of it and how can I improve it?
Best Regards,
Mohamad.

Hi Prabhu,
When I run the function over about 250 SO it takes some minutes but when run it over about 2000 SO, it takes many hours.
Here is the function that update one order, I use it into a loop, and each step updating one SO.
FUNCTION Update_orders.
DATA: header_in   LIKE bapisdh1,
            salesdocument LIKE bapivbeln-vbeln,
            header_inx LIKE bapisdh1x,
            order_item TYPE bapisditm,
            order_items TYPE TABLE OF bapisditm,
            order_itemx TYPE bapisditmx,
            order_itemxs TYPE TABLE OF bapisditmx,
            retrn     LIKE bapiret2
                             OCCURS 0 WITH HEADER LINE,
            pos TYPE posnr_va,
            wa_sales_target TYPE LINE OF ysales_target_table_type.
REFRESH: order_items, order_itemxs.
header_inx-updateflag = 'U'.
LOOP AT sales_target INTO wa_sales_target.
    READ TABLE pos_list INDEX sy-tabix INTO pos.
    CLEAR: order_item, order_itemx.
    order_itemx-itm_number = pos.
    order_itemx-updateflag = 'U'.
    order_itemx-prc_group4 = 'X'.
    APPEND order_itemx TO order_itemxs.
    order_item-itm_number = pos.
    order_item-prc_group4 = wa_sales_target.
    APPEND order_item TO order_items.
ENDLOOP.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
       EXPORTING
            salesdocument    = salesdocument
            order_header_inx = header_inx
       TABLES
            order_item_in    = order_items
            order_item_inx   = order_itemxs
            return           = retrn.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDFUNCTION.
Best Regards,

Can't run software in Classic mode

Boy, I've tried to fix this myself and just can't. I have a new out-of-the-box Mac Mini with a generic USB keyboard. I've got some old Mac software (really old) which is really a main reason I bought the mini. I can't get Classic to run because it's not already installed. I have the OS9.2.1 disc, but I can't boot from the CD (I tried pressing C on bootup -- either my Mac can't boot from CD or my keyboard doesn't communicate properly). When I try to run the OS9 installer to get Classic to work, I get the hair-pulling error message that I need to run the installer in Classic
mode.
A friend said I need the discs which came with the Mini, but I don't think there are any. Can the software which should have come with it be downloaded and burned on to a new CD in order to create a bootable CD?
Argh!!! Please help!
Warren

Thanks -- I did try that, just forgot to mention it. the CD isn't one of the options in startup disk. It says I can choose the hard drive or the network, and I've tried both. A friend said that Mac Minis can't boot from CD -- don't know if that's correct or not, but I can't seem to get it as an option.
I've tried to find any CD that may have come with the Mac Mini -- my friend said to look for one called "additional software and apple hardware test CD that came with the Mac Mini" but that is nowhere to be found. Either it didn't actually come with it (my hunch) or the staff in the receiving department took them out for safekeeping and hid them in a drawer somewhere and have forgotten. (Also possible.)
I can't imagine that I'm the only person in the world with this problem, but my tech support staff warned me in the first place. I wanted to try using some macs mixed in with our PC setup (because they can run this software, and because it seemed easy) and they said that they wouldn't be able to provide much support, since they're all PC people. I figured "how much support can it need? They're designed to be easy to use!" Oh well.
I'd really be keen to get any more suggestions from anyone who can help!!
Mac Mini Mac OS X (10.3.9)

Can't run report in ASYNCHRONOUS mode

Hi All,
I'm trying to make a report run in ASYNCHRONOUS mode. I want to press a button on a form, submit the report to the reports server and be able to navigate within the form while the report is being executed on the reports server.
My problem is, no matter what mode I choose (ASYNCHRONOUS or SYNCHRONOUS), the mode ALWAYS ends up being SYNCHRONOUS. After I press the button (code below), I get the hourglass and I can't navigate within the form until the report is finished. Then I can view it.
The reports server I'm using is installed locally on the same PC I'm testing the form.
Can someone help me please? I'm using using Forms Builder 9.0.2.9.0.
Thank you,
Artur
declare
v_repid REPORT_OBJECT;
v_rep in varchar2(100);
begin
v_repid := find_report_object('TEST');
SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_COMM_MODE, ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESTYPE, 'CACHE');
SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESFORMAT, 'PDF'); -- OR HTMLCSS
SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_SERVER, :TI_REPORTS_SERVER); -- local pc reports server
v_rep := RUN_REPORT_OBJECT(v_repid, v_param_list);
end;

Arthur,
Communication mode is soemthing forms handles when calling the run report object. Your code looks fine. You might get a quikc answer if you can post this in Forms mailing list
Thanks
The Oracle Reports Team

Can I run VSS over Single-Mode fiber long range?

Similar Messages

Maybe you are looking for