Can I save both DVD-R and DVD-Video files onto the same DVD?

Can I save both DVD-R and DVD-Video files onto the same DVD?

Hi Stan,
I just want the user to be able to run my video clips either on a 
computer or on a standard DVD player. It would be nice to include both 
formats on a single disc. I am new to this and am not sure what format 
is most widely used for standard DVD players. Thanks for your response 
and any guidance you can give me.
Quinn
Quoting Stan Jones <[email protected]>:
Stan Jones http://forums.adobe.com/people/Stan+Jones created the discussion
"Re: Can I save both DVD-R and DVD-Video files onto the same DVD?"
To view the discussion, visit: 
http://forums.adobe.com/message/4996961#4996961

Similar Messages

  • TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

    How can i enable both paired bluetooth and ios keyboard input at the same time?
    This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

    You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
    I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
    https://developer.apple.com

  • Can I have both iMovie 09 and iMovie 08 installed on the same Mac?

    Hi,
    This question may seem odd, but... I work at a college. In my role there, I provide training for students and faculty using a variety of technologies (including the iLife suite). I would like to purchase and install iLife 09 for my Mac for personal and professional use; however, I also need to maintain iLife 08 applications for training purposes for work. Is it possible to have both versions installed simultaneously?
    Thanks!

    Yes, you can, although Apple does not support the methods shown below. Here's how you can do it:
    _*If you have NOT installed the iLife09 upgrade yet......*_
    a) Open Finder & click on the "Applications folder"
    b) Click on the "New Folder" icon and name the folder anything you want (like iMovie08)
    c) drag the iMovie.app into the folder
    d) install iLife09....you will now be able to open iMovie09 by clicking on the icon in your dock, or open iMovie08 by going to the newly created folder and clicking on the older iMovie.app file.
    _*If you have already installed iLife09........*_
    ----IMPORTANT----
    *MAKE SURE YOU HAVE A BACKUP OF YOUR MAC in case something goes wrong, such as a recent Time Machine backup so you can restore your files!!!! Also, make sure you have the original installation disks for both iLife08 and iLife09, or the OSX installation disks with iLife08 on it..........*
    a) Open Finder & click on "Macintosh HD", then open the "Library" folder, then open the "Receipts" folder
    b) Scroll down and find the files marked *iMovie.pkg, iMovie_712.pkg, iMovie_713.pkg, iMovie_714.pkg*, etc. You will not have all of those files, and the numbers may be different than 712 or 713, etc. Move these files to the Trash. *DO NOT MOVE iMovie_PreviousFolder.pkg or iMovieHD6.pkg to the Trash if you have them...keep them in the Receipts folder.*
    c) Open Finder & click on the "Applications" folder, then find iMovie.app and move it to the Trash
    d) Open Finder & click on the "Macintosh HD", then open the "Users" folder, then open your user folder (i.e., "Paul"), then open the "Library" folder, then open the "Preferences" folder, then move *com.apple.iMovie.plist, com.apple.iMovie7.plist and com.apple.iMovie8.plist* to the Trash. You may not have all of these files, or you may have different names for your preference files, but as a general rule, any preference files with the words iMovie should be moved to the trash.
    e) Put your iLife08 or OSX install disk 1 in your DVD drive
    f) Double-click on "iLife08.mpkg" (iLife08 install disk) or "Install Bundled Software only" (OSX install disk)
    g) When the "Install iLife08" or "Install Bundled Applications" window appears, click on continue for all the agreements until you get to the "Standard Install" screen. Click on "Customize" and a new screen will appear with a list of all the applications (iLife08) or the words "Bundled Applications" in the OSX install disk, and next to those words is a small arrow....click on that to show the contents of the installation software. Uncheck all boxes except iMovie. Make sure that box is checked, then click on "Install" and follow all prompts to install iMovie08 back to your Mac.
    h) Once iMovie08 is back in your Mac, you will need to move it to a new folder as follows:
    i) Open Finder & click on the "Applications" folder
    j) Click on the "New Folder" icon and name the folder anything you want (like iMovie08)
    k) drag the iMovie.app into the folder
    l) Now, reinstall iMovie09 as follows....
    m) Put your iLife09 install disk in your DVD drive
    n) Double-click on "iLife09.mpkg"
    o) When the "Install iLife09" window appears, click on continue for all the agreements until you get to the "Standard Install" screen. Click on "Customize" and a new screen will appear with a list of all the applications. Uncheck all boxes except iMovie. Make sure that box is checked, then click on "Install" and follow all prompts to install iMovie09 back to your Mac.
    p) You will now be able to open iMovie09 by clicking on the icon in your dock, or open iMovie08 by going to the newly created folder and clicking on the older iMovie.app file
    Hope this helps!

  • Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

    I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
    Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
    in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
    So, a typical Lync deployment looks like this:
           Internal users
                     |
                   443
                      |
              Internal LB
            192.168.0.20
            443         443
              |               |
       Lync FE 1     Lync FE 2
    192.168.0.21 192.168.0.22
              |               |
          4443        4443
              External LB
           Public IP Address
                     |
                  443
                     |
           External Users
    This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
    is the keyword here.
    After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
    adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
    Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
    For reference, my commands are:
    Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
    (This completes successfully)
    Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
    (This fails)
    The existing external endpoint is configured as such:
    Get-AzureVM LYNCFE1 | get-azureendpoint
    LBSetName : HttpsExtLB
    LocalPort : 4443
    Name : HTTPS-Ext
    Port : 443
    Protocol : tcp
    Vip :
    ProbePath :
    ProbePort : 4443
    ProbeProtocol : tcp
    ProbeIntervalInSeconds : 15
    ProbeTimeoutInSeconds : 31
    EnableDirectServerReturn : False
    Acl : {}
    InternalLoadBalancerName :
    IdleTimeoutInMinutes :
    LoadBalancerDistribution :
    The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
    shouldn't be any conflict here... however it looks like there is one instead.
    Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

    Hello Massimo Pascucci,
    The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
    known as the Internal load balanced IP) per cloud service.
    There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
    You can leave your feedback by following the link below:
    https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
    Refer to this article for more information on Internal load balancer:
    http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
    Thanks,
    Syed Irfan Hussain

  • The Adobe License agreement - can I run one Mac version and one PC version on the same license?

    can I run one Mac version and one PC version on the same license?

    I'm specifically looking at Lightroom. Looks like I will be able to run both platforms... Now to figure out a goo file managment system if I'm editing photos on both systems.
    I travel with a PC laptop (can't afford a MAC yet) so I will do some editing on the road for posts to facebook etc. and the heavy editing on the IMAC when we get back from holiday.
    Thanks for your help.

  • HT1459 Just bought a new ipod shuffle for my kid and cannot set it up because it does not show up in itunes. Also the charging light does not light up. what could be wrong, as i am able to see both my iphone and ipad on itunes on the same pc?

    Just bought a new 4th gen iPod Shuffle for my kid. Problem is I cannot do the initial set up, as the device does not show up on iTunes on my PC. Also the charging does not light up. Any ideas on what could be wrong, as I am able to see both my iphone and iPad on iTunes using the same PC?

    I also tried manually underlining a few things on the new iPad and when highlighting a paragraph, it would skip a few lines and the line would go through a few as well. Looks like a major iBooks glitch needs to be addressed here.

  • Can i sync an iphone 4 and a ipad 2 with the same itunes library?

    can i sync an iphone 4 and a ipad 2 with the same itunes library?

    Open itunes. Plug in ipad.  Select what you want to sync.  Sync.
    iPad 2 User Guide (For iOS 4.3 Software)

  • Can I have an ATT account and a O2 account on the same Iphone?

    Can I have an ATT account and a O2 account on the same Iphone? So that when I am in the UK I use the O2 sim card and in the states use my ATT sim card? I would basically have two valid authorized accounts on one Iphone.
    Allan

    I don't believe that the phone would recognize the other sim card as legit. The US iPhone is locked to ATT and the UK iPhone is locked to O2.

  • How can u have lock rotation off and mute feature off at the same time

    How can u have lock rotation off and mute feature off at the same time

    Maybe this will help. The link at the bottom is the same one that was posted above.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • Can I install Web Standard CS4 and Design Standard CS4 on the same machine?

    Can I install Web Standard CS4 and Design Standard CS4 on the same machine?  My company purchased me a copy of one, and I have a personal copy of the other.  Wanted to make sure there wouldn't be any serial number problems in any case...thanks!

    Yes, but do a custom install to choose the apps to install to avoid any possibility of conflicts.
    Bob

  • How can I delete my apple id and create another one with the same email?

    How can I delete my apple id and create another one with the same email?

    So sorry; somehow I forgot to provide the link.   Here it is ...
    Frequently asked questions about Apple ID
    Again, my apologies.

  • WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click o

    WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click on the file it is looking for I get the message "This type of file is not supported, or the required codec is not installed". I have made many little films before but always have this problem now. Any suggestions?

    Margaret
    Although we are continents apart - Australia (Perth) vs North America (US), we will not let time zones interfere with getting your Premiere Elements 8.0/8.0.1 working.
    1. The usual Premiere Elements 8 drill.
    a. Are the automatic features of Background Rendering and AutoAnalzyer turned Off?
    For Background Rendering, see Premiere Elements workspace Edit Menu/Preferences/General. For AutoAnalzyer, see Elements Organizer workspace Edit Menu/Preferences/AutoAnalyzer Options.
    b. Are you running the program from the 8.0.1 Update? If not, see Help Menu/Update?
    c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements 8.0/8.0.1?
    Apple - QuickTime - Download
    2. The usual computer drill....for your Windows XP 32 bit (SP3, I presume)
    a. Is computer opitimized, defragmented, etc.
    CCleaner - PC Optimization and Cleaning - Free Download
    b. Are you running your computer from a User Account with Administrative Privileges? That is important for Premiere Elements 8 as well as for its
    required QuickTime. In addition, right click the computer desktop icon for Premiere Elements 8 and select and apply Run As Administrator.
    3. Project Specifics
    For now, import your source media into the project from the computer hard drive using the project's Get Media/Files and Folders. Leave the Elements Organizer and Albums out of the equation for now. We will circle back to it soon after we decide everything else is working as it should be.
    a. You need to set a project preset. And, that project preset should match the properties of your source media. So important to know properties of source media.
    b. When you import your source media into a project you will get a red line over its content if the project preset is not a match - either because you set the wrong one or the program does not have a match for your particular video. That red line means that you are not seeing the best possible preview of what is being played back in the Edit area monitor. To get the best possible preview, you hit the Enter key of the computer main keyboard to get a rendered Timeline (red line goes from red to green after this type of rendering). That green line over your rendered Timeline indicates that you are now getting the best possible preview. This is solely a preview thing. Longer story, but I will leave it at that for now.
    c. Check Edit Menu/Preferences/Scratch Disks to assure that those Scratch Disks are being saved to a computer hard drive location with enough free space to accept them. Make sure that you do not have pile ups of previews files, conformed audio files, and conformed video files.
    See Local Disk C\Documents and Settings\Owner\My Documents\Adobe\Premiere Elements\9.0
    Never move, delete, or rename source files after they have been imported into a project which has been saved/closed. Otherwise, nasty media disconnect problems. You have only copies of media in Premiere Elements. The originals are on the hard drive, and the project must trace back to the originals where they were at import.
    Based on the above, try to start a new project. But, let me know ahead of time what you will be importing into the project. I am looking for
    Video
    video compression
    audio compression
    frame size
    frame rate
    interlaced or progressive
    pixel aspect ratio
    If you do not know, we could try to get that type of information from knowing the brand/model/settings for the camera that recorded the video.
    Photos
    Pixel dimensions and how many photos?
    Lots and lots of details, but eventually they all mellow into one workflow that you can customize for your projects.
    Please do not hesitate to ask questions or to ask for clarification. We can go at whatever pace you feel comfortable with.
    ATR

  • Can a single Access Point support both bridge mode and Access Point mode at the same time

    Hi Guys
    Does anyone know which access point can work in both bridge mode and AP mode ?
    Cheers

    Well what are you trying to cover. If its really a large outdoor area, then look at the mesh AP. Those require a WLC. Autonomous or stand alone ap can perform bridging on one radio and client access on another. You can also look at AP that support indoor mesh that also controlled by a wlc. If your putting APs outdoors, then look at the outdoor mesh.
    Thanks,
    Scott Fella
    Sent from my iPhone

  • What is the easiest way to burn imovies onto DVD's.   I want to burn more than one movie onto DVD as I create.    Can I continue to burn onto the same DVD as the movies are created?

    What is the easiest way to burn my imovies onto DVD's?    I want to burn movies as I create them and then continue to add more movies to the same DVD as the years go by -- until the DVD is full!    Is this possible?

    You might also want to post this in the iMovie forum https://discussions.apple.com/community/ilife/imovie

  • How to burn more than one file on the same dvd?

    I would like to burn more than one file in to the same dvd. It seems to me that using Finder I can burn only a file. There is some alternative command? Thank's

    Select all the item to burn... right click...
    Or
    Place all items into a folder and burn the folder to the disc.
    Or
    Make a Burn Folder in the Finder (place items into the folder) and burn from there to a disc.

Maybe you are looking for

  • Using REF with object table in SQL Developer

    When i create object tables and fill them with data, then in SQL Developer de REF value isn't displayed. I did the following: CREATE TYPE adres_type AS OBJECT (straat VARCHAR2(20) ,nummer VARCHAR2(10) ,postcode VARCHAR2(6) ,plaats VARCHAR2(50)); CREA

  • How do i access my icloud contents

    i just got mu iphone 5 & synce it thru the icloud but all my apps n contact didnt come through. So i then synced it to itunes on the comuter & al my apps are gone!! any ideas? also how do i access my icloud contents so that i can delte some apps from

  • Mac Mini Server freezing in install when choosing PPPoE

    I have a Mac Mini Server and when I go through the installation procedure and choose the connect PPPoE from the Network settings, the installation hangs every time. I have already tried several clean installs from the Mac Mini Server disc to no avail

  • Best practice for BI-BO 4.0 data model

    Dear all, we are planning to upgrade BOXI 3.1 to BO 4.0 next year and would like to know if Best Practice exists for BI data model. We find out some general BO 4.0 presentations and it seems that enhancements and changes have been implemented: our go

  • I cannot open mail

    i know that there are some strange problems out there with mail. i have read over them, but am afraid to do anything that doesn't specifically pertain to my situation. today, when i was sending an email, i got a message (i didn't pay exact attention,