Can I save the configuration of a tabbed finder window?

So I've spent five minutes organising a finder window with tabs giving me access to all my most useful folders and am thinking that I really like this new tabbed finder business. I then close the finder window and when I then open a new finder window, it has reverted back to a single tab and I have lost my nice tabbed arrangement.
Is there anyway to save the arrangement of a tabbed finder window so that it opens like that by default?
Thanks

Oke. Checked the user credentials again and now i got a configuration backup.
So no problem!
Cheers,
Erwin

Similar Messages

N7K can't save the configuration

The N7K can't save the configuration to startup, here is the error message, the box is running 5.0.5, see you idea if it
N7K-1# copy run startup-config
[########################################] 100%
Configuration update aborted: request was aborted
Log message
===========
2013 May 31 09:59:01 %SYSMGR-STANDBY-5-CFGWRITE_STARTED: Configuration copy started (PID 2547).
2013 May 31 09:59:02 %SYSMGR-STANDBY-5-SUBPROC_TERMINATED: "System Manager (configuration controller)" (PID 2547) has finished with error code SYSMGR_EXITCODE_SYSERR (1).
2013 May 31 09:59:15 %SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id 0x401E0000).

Hi Yeun,
Whats the firmware you are running:
There are couple of bugs been reported for this issue:
FIX IN: 5.1.2
1. CSCtj44206     N7K/5.1.1: copy runn start aborted due to timeout
2. CSCtx50294     Installer:copy run to start fails in specific setup when deployed as HA.
3. CSCtj92312     N7K Unable to save config following crash of res-mgr process.
4. CSCtj83417     ISSD fails or 'copy failed (error-id 0x401E0000)' error
HTH
Regards
Inayath
*Plz rate this post if this info is helpfull and mark the thread as closed if this info answered your query.

I can not save the configuration sfe2000 linksys one

attempt to admin I can not save the configuration
and l1_admin I do not have acces

I understand the error statement, but if you could provide more info we should be able to correct the problem.
When did this start?
Is this a new switch?
FW version?
Do you have RADIUS user authentication?
Anything that you may feel we should know.

Can't save the configuration of an existing track

Hi,
i have created a track before define a product,sc... and it OK. i know it's wrong step, so after defined a product,sc and etc follow the NWDI Configuration document, i try to delete(modified to save) the existing track,The following error message is displayed:
Unexpected error; inform your system administrator: <null>
I got a solution in SAP notes as following:
The following error message is displayed when you save the configuration of an existing track:
Unexpected error;inform your system administrator: For input string: " "
Other terms
Data conversion, NWDI, CMS, Change Management Service
Reason and Prerequisites
" " default values for new fields in CMS were inadvertently delivered for new fields in CMS.
Solution
Execute the following SQL statements on the database of your J2EE application server:
UPDATE cms_cdevconf SET DTCVERSION = null WHERE DTCVERSION = ' '
UPDATE cms_cdevconf SET DTCPATH = null WHERE DTCPATH = ' '
The problem has only occurred previously on ORACLE.
I executed the sql sentence through VA, but it's not work.
Any input is thoroughly appreciated.
With Regards,
Lin

Someone?
Any help is appreciation...
Regards, Lin
Edited by: BingLin Zhong on Sep 2, 2008 4:46 AM

Can't show the configuration on Cisco 4503-E

I have cisco 4503-E as my core switch. When I want to read or save configuration it show "NVRAM: Unable to read configuration. Try again later."
Somebody said the cause of simultaneous access to NVRAM. I use "show users" to see the access users but there are no other access, only me.
Can it be cause of hardware?
Please kindly provide the solution. Thanks.
Best regards,
Mano

The issue is triggered when you have a large configuration file and immediately after exiting the configuration mode you attempt to save the configuration in NVRAM. The issue is related to an internal timer event whose behavior cannot be modified.
If you give a sufficient time between an exit from configuration mode before saving the configuration the problem will not resurface.
You can also find one known DDTS - CSCtn46265 which explains the issue. Please let me know if you have any questions.
HTH
Regards
Inayath
*Plz rate if this info is helpfull.

Can't save Actiontec configuration file....

I have an Actiontec MI424WR-GEN3I Rev I router and I'd like to save the configuration file as an emergency backup. I've done this before but now when I navigate to Advanced > Configuration File and click on Save Configuration File I get two pages of alphanumeric characters, bascially jibberish to me, and nothing else happens.
I'm running Win 7 (x64) SP1, Microsoft Security Essentials, and get the same results with IE 11 or Firefox.
Does anyone have a suggestion why this is happening, and/or what I can do to save my configuration file?
Thanks in advance for any ideas.
Solved!
Go to Solution.

And the answer is....
I run Adguard ad blocker. I had the thought to try disabling Adquard and sure enough, that solved the problem.
Disabled Adguard; save the config file; re-enabled Adguard.
I'm posting this just in case it might help someone with a similiar problem in the future.

WS-C4006 How to save the configuration

Hi,
I have Cisco 4006 Switch model; normally we don't need to save the configuration on this device but somehow this device is not saving any configuration.
Can someone help me; how to save the configuration. Attached is the IOS version detail.
****************** show version ******************
WS-C4006 Software, Version NmpSW: 7.1(2)
Copyright (c) 1995-2002 by Cisco Systems, Inc.
NMP S/W compiled on Feb 7 2002, 16:53:43
GSP S/W compiled on Feb 07 2002, 15:24:55
System Bootstrap Version: 5.4(1)
Hardware Version: 3.2 Model: WS-C4006

hi
can u verify whether this command is enabled in ur box or not ?
set config mode text auto-save enable
hope you are aware of this cli which does save the configs automatically after every 30mins.
regds

I purchased an iPhone 3 and had photos on it. Started having issues within 30 days and could replace it. Moved photos to back up on iCloud. did not restore new phone from back up how can i save the new photos and retrieve the old ones?

I purchased an iPhone 3 and had taken some photos on it. I started having issues within 30 days and could replace it. So I created an iCloud account and saved those photos as a back up on iCloud. I did not restore my new phone from back up because I did not realize I needed to restore and not just activitate it. How can I save the new photos, apps, and other stuff but retrieve the old photos?

If all you want is your old photos, you could backup your new phone using iTunes, then restore it from your iCloud backup, import the old photos to your computer, then restore it from the backup your made in iTunes returning your newer data to your phone. If you want your old photos on your phone, sync them there from your computer using iTunes. The process would look like this:
Connect your phone to your computer, when it appears in iTunes on the left sidebar right-click on it and select Transfer Purchases; right-click again and select Backup.
Disconnect from your computer and go to Settings>General>Reset>Erase All Content and Settings to return it to new
Go through the activation setup, choosing to Restore from iCloud backup. Make sure your phone is plugged into a charger and has access to wi-fi as this can take hours to complete.
When complete, without connecting your phone to your computer, open iTunes and go to Preferences. On the Devices tab check "Prevent...from syncing automatically"
Now import the old photos to your computer (see http://support.apple.com/kb/HT4083)
When done, open iTunes, right-click on the name of your phone on the left sidebar and select Restore from Backup, choose the backup you made in step 1.
Go to the Photos tab and select the photos you want to sync to your phone and sync.

Can we save our BEX queries in tab-delimitted format ?

Hi ALL
Can we save our BEX queries in tab-delimitted format (instead of comma-delimited)?
Please let me know for further clarifications
Regards
Bhagesh

hi bhagesh:
You mentioned:
For eg. We can save .CSV file of BEx query extracts with the help of reporting agent with the help of background schduling.
Can u tell me procedure for this ? how can i get query output in .csv format using reporting agent and with and without option of schedule it in background.
I will come back and assign the points to the answer.
thank you,
K Smith

I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can't save the file "TEST.pages" because the volume is read only.

I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can’t save the file “TEST.pages” because the volume is read only.
I get the same message when using Numbers so I presume it is a OS problem

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data before proceeding.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
 ▹ Restart
from the menu bar.

Can i save the firefox option page showing saved passwords for reference to msword

Hi,
How to save the saved passwords to a word editor or note pad.
I could view the saved passwords in the security tab, in the Options, but can i save the same for immediate reference to ms word to take a print out

https://addons.mozilla.org/en-US/firefox/addon/password-exporter/
Allows you to export password data in CSV and XML format - both are text based formats which can be read in Word and Notepad.

Can I save the Bandwidth of Azure RemoteApp Client ?

Can I save the Bandwidth of Azure RemoteApp Client ?
I want to use Azure RemoteApp in MOBILE.
MOBILE's bandwidth is under 1 Mbps like 256kbps, 128kbps.
And Some mobile network have a total network usage limit like 3GB/Month, 1GB/3day.
And More low price plan of mobile have more small limit like 2GB/Month, 1GB/Month.
The "Remote Desktop Connection" Application in windows destkop have "Exprience" Option for save bandwidth,
like "Font smoothing", "Visual styles", etc.
Regards,
Yoshihiro Kawabata

Hi Yoshihiro,
There is no option in the Azure RemoteApp client to manually reduce bandwidth consumption. What you could do is use a third-party bandwidth limiting program. For example, when you are connected via mobile wireless you could set it to limit max
bandwidth to 768Kbps, and when you are connected to non-metered connection set it to unlimited.
In your template image you could use group policy settings to potentially reduce bandwidth usage to a limited degree, but these settings would affect all users. Please take a look under Computer Configuration\ Administrative Templates\ Windows Components\
Remote Desktop Services\ Remote Desktop Service Environment. You should test each option in order to see if there is any benefit.
Please note that some options will not have any effect. For example, color depth will always be 32-bit, so there is no point in configuring it to limit to a lower value.
Also you can force certain options using custom rdp properties on the collection using Azure PowerShell, however, the net effect on bandwidth consumption of these options is limited. Again, this would apply to all users of the collection.
In the pre-RDP 8.0 days there were certain options that could make a big difference under the right circumstances. For instance, if you were only using a basic data-entry application you could set the color depth to 8-bit and connect at relatively
low resolution such as 1024x768 or 800x600 and the bandwidth consumption would be very low.
You can take certain manual steps to reduce bandwidth if you want. Things like reduce the local resolution of your PC screen, only have single monitor, do not use any rich content in your session, do not use any audio, do not transfer files, etc.
Thanks.
-TP

'Cannot save the configuration. Another process already wrote version 11.

Hello:
I shutdown the directory server 6.3.1 on Solaris 10, then modified the file dse.ldif by hand, then restarted the DS.
Now whenever I try and make changes through startconsole it gives me an error. I have put back the *.startOK" file and even rebooted.
I cannot seem to figure out how to correct this problem. Any ideas?
WARNING 21 console hostname "The console caught exception: 'Cannot save the configuration. Another process already wrote version 11.' at 'SaveConfigurationTask:74'."
Thanks

Well I finally figured out a way to correct this problem. Not sure what caused it or if this is a good fix of not.
But what i did was go into the DSCC
selected my directory server and then chose the server configuration tab
I then enabled a plugin, stopped/started and then disabled it, and then stopped/started.
then i could make changes in my startconsole (isw settings)

My video is crap but I love the sound. Can I save the sound track of a movie as an mp3?

My video is crap but I love the sound. How Can I save the sound track of a movie as an mp3?

Yes, you can do this.
In iMovie, use SHARE/EXPORT USING QUICKTIME...
In the dialog box, choose "Sound to AIFF".
This will create a sound only version of your movie in the AIFF codec.
You can drag this AIFF file into iTunes and convert it to AAC or MP3.
In iTunes, go to iTunes/Preferences. In the General Tab, click the Import Settings button. Remember how it is currently set, (because you may want to change it back.) Choose IMPORT USING: MP3 Encoder.
Now, right-click on the music track in iTunes and select "Create MP3 Version".

Can't save the illustration. The requested transformation would make some objects fall completely of

I wan't to save an AI file as an EPS. I get a message; Can't save the illustration. The requested transformation would make some objects fall completely off the drawing area. I already did the ctrl+A but there is nothing outside my drawing area! It is a quit big file 2GB, but I don't think that this should be a problem! I really hope that somebody can help me?!?

It does, blablabla.
Thank you for sharing.
Monika has kindly made the following excellent and unique polyglot(t) web page available for everyone. I have never seen any of the terms in non English languages before, so I have it bookmarked, and I keep it ready in a separate Tab so that I am prepared for any funny words (needed) at any time.
http://vektorgarten.de/illustrator-polyglott.html

Can I save the configuration of a tabbed finder window?

Similar Messages

Maybe you are looking for