Can I schedule when a message is to be sent?

Does Apple Mail have the feature whereby I can schedule when a message is to be sent, and until that moment it stays in the Draft Folder? If not, is this a (Automator) script that might be available? Thanks.

No, Mail does not have that feature. You can use AppleScript to accomplish the same thing. Download Mail Scripts here.
Mulder

Similar Messages

Newbie - How can I know when someone opens a PDF I sent in an email?

I'm trying to get a simple proof of receipt when someone opens a PDF attached to an email. Any suggestions about how to do this?

Thanks try67. Consider this: I'm not trying to silently trick the receiver, either. I intend to explain to them up front that when they open the attached PDF, it will provide a signal that is the proof they have been notified. It's also okay if this isn't easy; I have IT people that can do it.

When I update my nano ipod I get an error message "User ipod cannot be updated. The disk couldnot be read from or written to." How can I overcome this error message.

In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.

Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

After aborted rebuild in Mail: I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up

I have searched quite a bit to find a resolution to this problem, with no success. Any help would be appreciated.
I decided to rebuild my inboxes by following this advice: http://support.apple.com/kb/PH11704. The rebuild took several hours and at 96% (4 minutes remaining apparently), the indexing froze (that is, after 8 hours, the message was still telling me "4 minutes left"). I forced quit mail, restored the previous Envelope files from the trash, and everything seemed fine.
However, since this failed attempt, I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up. All messages in my various inboxes have the reloading problem, EXCEPT messages that I downloaded since the aborted rebuild (in other words, there are about 40 messages that I downloaded since I tried the rebuild and I have no problem with these). The other 70,000 messages however wont load, even though I can see them in the centre pane and spotlight has no problem finding them and showing me their contents (when I hover the mouse over the message). When I click on the message in spotlight, mail opens and the loading problem re-occurs.
Since then, based on various suggestions I found for similar issues, I have used Disk Utility to verify and repair permissions and the drive. I used Onix to rebuild the Mail index (that only took about a minute - I am not sure how to interpret this when compared to the hours the rebuild took with Mail). No joy, I still have the same problem. I even restored one of my inboxes via Time Machine and the same issue with loading continues.
I am using ML 10.8.2. I have a combination of IMAP accounts (work) and POP accounts (personal). The issue of loading occurs irrespective of the account.
I am baffled and am now considering migrating to either Thunderbird or Postbox 3 to try and solve my problem. I prefer to stay with Mail. I should note also that I am using MailTags with Mail (http://www.indev.ca/MailTags.html), although I have not used any of the features. I upgraded to ML from SL about 2 weeks ago. It was very smooth and there appear to be no issues (not sure how helpful this is and probably not at all related to this issue).
Any suggestions much appreciated!

Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain.

When I turn on messages, I can't see my messages. All I can see is a screen with horizontal lines and a text list of addresses. How can I get the regular message screen back?

When I turn on Messages, I can't see my messages. All I can see is a screen with horizontal lines. How can I get the regular Messages screen back?

The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.

SPM 2.1 Scheduling Option - Daily. How can I control when during the day?

Hi All,
I understand that when you enable the "scheduling" option in the report, the report runs in the background and this caches the data to table opmdm_precalc_a.
You can set scheduling to daily or weekly runs. The weekly load can be set in the "Application Properties" menu e.g. to Sunday.
If I chose "daily", what time is it run then? The same time as the alert in "Application Properties"?
I've had a quick look at OPM* and RSXA* tables but couldnt see anything obvious as a clue.
Many thanks for any help
Neil

Hi Neil,
Yes, you are right. The time of execution is the same as the one for alerts.
Regards,
Rohit

I can't see my Gmail messages or attachments in Firefox, only the subject line, but I can in IE or when accessing from my Android.

I use Firefox 7.0.1 on my desktop using Windows 7. As of yesterday I can no longer view my messages in Gmail when I click on them using Firefox. A window comes up, but it just shows the subject line, not the rest of the message. I can see them in Outlook, and I can see them in Gmail from IE or from my Android.

This is only happening on my e-mail account, My mail will open in Explorer fine, but in Firefox it only shows the subject, it shows the rest of the message in a separate tab if I try to print the message.
My wife was able to open her gmail on a separate tab, and hers loaded just fine, subject and the rest of the message but on mine, I can only see the message and the Google adds, grrrrr please help!!! is this an Issue with Gmail???

The system can't find support team when support message create

Dear experts,
The system can't find support team when support message create.
It show the error that
"<u>The action definition SLFN0001_ADVANCED_SMDIAG has not been assigned a merging technology</u> "
and "<u>the action merging cannot be executed</u>."
Did anyone know how to solve this problem?
Thanks in advance

Hey pavienee,
Let me inform you that the action defination SLFN0001_ADVANCED_FIND_PARTNER is responsible for finding the right support team, this is valid if you make relevant settings by assigning partners in ib52 ti the ibase component.
The action log SLFN0001_ADVANCED_SMDIAG has nothing to do with support team determination.... This action is meant for Solman diagnositics.
Please Reward points for usefull answer and revert for any clartifications.
Regards,
Anand..

It Gives me no reason this message often the first to enter my pass:" When you can not buy Equilibrium - Leonardo da Vinci's Balance Puzzle " and 27other elements. Please try again later". How can I remove this annoyng message? Maybe it's a Virus?

It Gives me no reason this message often the first to enter my pass:" When you can not buy Equilibrium - Leonardo da Vinci's Balance Puzzle " and 27other elements. Please try again later". How can I remove this annoyng message? Maybe it's a Virus?

The old rule of thumb was to keep 10-12 GB free. Any lower than that and you will start to have trouble. I was very close to that for a long time and never had any complaints. Now, Lion "encourages" 20% free space (on my newer 250 GB drive) so I try to keep it with more than 50 GB free.
Do you still have the original memory in that machine too? The metal plate you have to remove in the battery compartment also provides access to the RAM. Your machine will take 2 GB of RAM, possibly 3. You definitely want to max that out too.
Regardless, you definitely need a new hard drive. When Apple switched to PC components, they had to take a quality hit. These 2.5" notebook hard drives are not very reliable. I'm surprised your hard drive hasn't died by now. I usually get a new hard drive with every major OS upgrade. A $ 50 investment every couple of years is no big deal.
Unfortunately, you (and I) suffer from being an early adopter in 2006. Those 32-bit machines only accept 2 GB RAM (maybe 3) and are only 32-bit so they can't be upgraded to Lion. Because of this limitation, you won't see as dramatic an improvement as you would with a 2007 machine. If you run more than a couple of applications, your hard drive is always going to have to be doing some VM work. My 2006 machine has even lost its bluetooth. I gave it to my brother. My very similar 2007 Macbook is still running great.
So, you must get a new hard drive because your old one is likely on death's door. If you don't have at least 2 GB - get it. If you can't afford a new machine, you might want to consider an SSD. That might help mitigate your RAM limitations. You can spend from $ 100 to $ 350 and get a dramatic speed improvement.

I can `t buy OS X Mountain. A game can buy. When I click on the Buy Now button, this message appears: We could not complete your purchase, the product distribution file could not be scanned. It may be damaged or not signed.

I can `t buy OS X Mountain. A game can buy. When I click on the Buy Now button, this message appears: We could not complete your purchase, the product distribution file could not be scanned. It may be damaged or not signed. I have macbook air 11-inch Mid 2011.

Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type or copy / paste: /Library/Preferences/SystemConfiguration
Click Go then move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store. Try purchasing Mountain Lion.

TS2755 On new IOS 7, when I message contacts, it selects thier old contact number, despite the fact I have deleted/edited their number in my contacts list. IOnly by going through contacts, can I message the correct number. The old number does not appear t

On new IOS 7, when I message contacts, it selects thier old contact number, despite the fact I have deleted/edited their number in my contacts list. Only by going through contacts, can I message the correct number. The old number does not appear there, so I am unsure where "messages" is picking up the old number, it doesn't appear that "messages" is synching with "contacts". Any ideas how to fix this?

On new IOS 7, when I message contacts, it selects thier old contact number, despite the fact I have deleted/edited their number in my contacts list. Only by going through contacts, can I message the correct number. The old number does not appear there, so I am unsure where "messages" is picking up the old number, it doesn't appear that "messages" is synching with "contacts". Any ideas how to fix this?

How can I turn off "reply" button when the messages come? I prefer the "open" button.

How can I turn off "reply" button when the messages come? I prefer the "open" button. Because my friends usually send lots of messages at the same time so I cannot read all of them when I press "reply", then I have to go to Messages -> my friends' messages, and it's really complicated.

Sorry for not quite understanding. I guess you are referring to a notice in an alert. I do not have that alert active on my device, so I cannot say. I use the banner alert, so I just get a notice of a message and can swipe to open that particular message. If I ignore it, it will eventually go away.

Hi Since upgrading to Firefox 4.0 I am unable to clear history and get the message "quick time failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas?

Hi I Run Windows 7. Since upgrading to Firefox 4.0 I am unable to "clear history" and get the message "QuickTime failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas or suggestions?

i have that quicktime problem too

Can I schedule when a message is to be sent?

Similar Messages

Maybe you are looking for