Can I seamlessly toggle Apple TV between Mac Mini and Iphone / iPad?

I am having a Mac Mini, iPad, iPhone and Apple TV. Currently i am using 2 HDMI cables 1 between TV and Mac Mini and 2nd between TV and Apple TV. Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV; it becomes an issue.
Can I seamlessly toggle Apple TV between Mac Mini and iPhone / iPad?
Regards,
Mahendra Panchal.

Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV;
Toggle how?  What are you doing?  Why do you have the MacMini connected to the TV?  That is the whole point of AppleTV.  It is a simple way ( in therory ) to get your content to your TV without having to plug your computer in to your TV.
it becomes an issue.
What does?  What is the issue?  What specifically fails or does not work?

Similar Messages

  • How can I share my LR catalog between Mac Mini and MacBook Pro?

    How can I share my LR Catalog between my Mac Mini and MacBook Pro?

    Your Lightroom license key is
    a. Single user / owner
    b. You are allowed two active installations, with one in use at any point in time.
    c. It is cross platform Mac and or PC.
    d. You can install / uninstall as many times it is necessary, as long as you meet the criteria above.
    The latest updates can be accessed from the link below.
    Product updates

  • Remote links between mac mini and iPhone but won't work

    My iPhone and mac mini Keynote apps will connect and link but when I try to run a presentation, all I get is a big red exclamation point and a statement the two devices have to be on the same network - which they are.  Any suggestions on how to get the remote function to actually work?
    Scott

    Hi Illaass, thanks for the response, much appreciate you taking the time to reply
    I went through the reboot cycles and got as far as the Disk Utility screen. I ran both the Verify Disk and then the Repair Disk processes and in both instances it "eventually) displayed the following respective  "red" messages;
    1) "The volume Macintosh HD could not be verified completely"
    2)  "Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files"
    So. I tried to reformat the disk. I got the following message
    "Volume Erase failed - with the error - Couldn't open disk"
    I don't know if this makes any difference but on the left side of the Disk Utility screen (and I wasn't able to actually get into the Mac during the above actions, just the DU screen) it lists the drive details as;
    <<drive icon>> 500.11 GB Hitachi HTs5
         Macintosh HD
         indent <CD icon>> Superdrive (grayed out, cant be selected)
    then underneath that
    <<icon>> disk1
         indent <<icon>> OS X Base System
    cheers and thanks again
    Chris

  • Loose connection between Mac Mini and Apple TV 2

    Help!     I have a new Mac Mini 2.5 ghz running Lion and Apple TV2 hooked up to my 32 inch LG TV.
    Before I got the Mac Mini, Apple TV was running just fine on the same network with my Win 7 machine.
    Ever since I got the Mac Mini and I run the Apple Tv at the same time.  I loose connection on both.  My cable provider replaced the router and all my other Win 7 machines run just fine on a wireless network.  I might also add that when the apple tv and mac mini goes down, my ipad 2 goes down too.  Of course, air play doesn't work .  It comes and goes.
    I have a 2nd Apple TV 2 and hooked that up to the same tv with the same results.  I have called Apple many times.  They are helpful but not been able to solve my problem.   The cable provider and I have traced down to a conflict between the Apple TV, Mac Mini and the IPAD 2 . 
    Does anyone have any ideas what may be wrong?

    I have had multiple ATV's, desktops, laptops, and i Devices all running at the same time without a problem. Typically on a network when you start 2 devices and the connection crashes it is an IP problem. Check the IP address on both devices and see. It is usually easiest to have the router assign IPs automatically using DHCP. The router, computers, and ATVs should also be set to DHCP.
    If everything is set to DHCP try disabling DHCP and assign fixed IPs to each device.

  • Internet connection sharing between Mac Mini and Imac G3- how?

    Ok, I'm trying to connect my G3 Imac (running 10.4.8) to my Mac Mini (also running 10.4.8) but it just wont work.
    I've turned Internet Connection sharing on on my Mac Mini, and set it to share the airport connection to computers connected using Built in ethernet.
    Network (on the M Mini) shows
    Built-In Ethernet is currently active. Built-In Ethernet has a self assigned IP address and may not be able to connect to the Internet.
    Network (on the G3) shows
    Built-In Ethernet is currently active and has the IP address 192.168.2.7. You are connected to the Internet via Built-In Ethernet.
    When i try to go to a webpage on the G3 it fails stating, 'You are not connected to the Internet'.
    I'm using a standard straight through ethernet cable, as I was told a while ago from apple support that it doesn't matter which u use, straight through or crossover.
    Any help would be really appreciated
    Macbook 2.0Ghz 2GB 80GB/Mac Mini 1.42Ghz 1GB 80GB/Imac G3 450Mhz 640MB 80GB   Mac OS X (10.4.8)  

    OK after some playing about I can now manage to connect to the mac mini and vice versa to share files.
    The iMac G3 now says it has an IP address of 192.168.2.18, and that it's connected to the internet via built-in ethernet. I've set configure IPV4 to Using DHCP.
    Except it's not connected to the net.
    If i select Using DHCP on the Mini it doesn't obtain an IP address, not even a self set one. So i've set a manual IP address on that, and everything shows up green. Airpot connected to the internet and Ethernet has an IP address of 192.168.2.30.
    After reading some forums I set up firewall logging. The result is what happens on the Mac Mini when I use network diagnostics on the G3:
    Feb 11 16:43:52 richard-xxxxx-mac-mini natd[394]: failed to write packet back (Host is down)
    So I opened port 394 (not really knowing what i'm trying) but it had no effect.

  • File sharing between Mac Mini and iMac "breaks" after reboot of either device, and won't restore.  Why?  Running Maverick 10.9.1 on both.  File sharing is setup on both.  Help.

    I'm a new user - recent convert from longtime Windows to Apple.  Thought having desktops and computing aligned with phones and tablets would help.  Not so far.
    I have a MacMini running Mavericks 10.9.1, and an iMac running Mavericks 10.9.1.  File Sharing is set up on both.  If either device is rebooted for any reason, file sharing from the Mac Mini to the iMac "breaks" and will not easily restart.  Various things eventually brings the connection back - usually having to do with checking and unchecking File Sharing, the AFP button, and/or the SMB button on the iMac - but never the same procedure twice in a row.  File Sharing from the iMac to the Mac Mini is never disrupted - always comes back up without a problem.  Screen Sharing also works between both without fail, and comes up after reboot of either.  No problem there.  Only difficulty is from Mac Mini to the iMac. 
    Why?  Any ideas? 

    Should also clarify - usually takes multiple hours of checking/unchecking file sharing settings in order to restore the share between Mac Mini and iMac.  NEVER happens automatically.
    This is disruptive because I've got the Mac Mini pointing to several file locations on the iMac for various things - photos, music, etc. - and they all hang up unless the share is restored.  Real bummer.

  • Is it possible to sync my mail folders/boxes between Mac mail and iPhone?

    Is it possible to sync my mail folders/boxes between Mac mail and iPhone? ie. I get an email on my iphone but I also read it and store it On My Mac folders.  Is there a way this can be set up 'same' on my iphone...then I would only need to read my mail one place? Same as my iPad...I'm tired of doing the same step 3 times ONLY because my folders are only on my MAC

    IMAP is a mail protocol. Your email provider must support it (most regular ISPs do not). If your mail provider supports IMAP then when you create an account on the iPhone choose "IMAP" when prompted. You cannot convert a POP3 account to IMAP; you must delete it and re-create it. But first check to see if your provider supports it. Microsoft Exchange works similarly to IMAP, but has the added feature of "pushing" mail to your phone within seconds of it being received.
    With IMAP and Exchange the master copy of all mail remains on the server until deleted. Your computer(s) and iPhone sync with the server, so all of your devices will show the same messages. When you delete from one the message will be removed from all with the next sync (or immediately for Exchange).

  • Does airplay work between mac mini and ipad

    Hi !
    i hawe a mac mini and a ipad does airplay work between them?

    You can AirPlay mirror with a newer iPad to a computer using this app:
    Reflector - AirPlay mirror your iPhone or iPad to any Mac or PC, wirelessly.
    Can't from computer to iPad

  • Why can't iTune Apps download to my Mac Mini and MacBookPro?

    Why can't iTune Apps download to my Mac Mini and MacBookPro?

    Because those App's are for iDevices like iPad's and iPhone's.
    For Mac App's, you need to go to the > Mac App Store.

  • Graphite base station not working with my Intel Based Mac Mini and iPhone.

    My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
    Message was edited by: Soriano

    I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
    In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
    The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
    The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
    After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
    The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
    I hope this helps.

  • I'm trying to set up Continuity with mac mini and iPhone 5s and not working

    I'm trying to set up Continuity with mac mini and iPhone 5s and not working, bluetooth not pairing

    Your Mini is not supported.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity

  • Bridging the gap between Mac Mini and iMac

    Does anyone agree that Apple needs to add another model between the Mac Mini and the iMac? I think they need something like a Mac Mini Plus. Two models, one with the 1.83GHz Core Duo and one with the 2.0GHz Core Duo. The unit itself would be slightly larger than the standard Mini and include a PCI Express slot with several video card options and a faster (7200RPM) hard drive. Personally, I hesitate to buy an iMac because of the built in monitor. I would prefer to buy a separate LCD flat panel monitor that I could keep for years and use with different Mac models as I upgrade. As for the current Mac Mini, it's video and processor options are on the low end, albeit perfect for the casual user, but for someone that wants to do some gaming or video editing, they don't quite cut it.
    Don't get me wrong here, I love the elegant design of the iMac, but I think Apple needs to offer something that allows us to have the iMac equivalent computing power without the built in monitor and without having spend a thousand more on a PowerMac.
    Athlon XP 1800+   Windows XP Pro  

    Yes, I'd love something in the form of a Mac Mini that was closer in spec to the iMac.
    Honestly, the only reason I won't buy an iMac CoreDuo is the built-in monitor.
    And, the only reason I won't buy a new Mac Mini is that they are underpowered.
    I have owned two iMac G5 systems, and both had serious faults with their built-in LCD panel.
    The first would permanently etch in anything on the screen for every hour of intensive use.
    It wouldn't etch it in in normal use. But, if I did any of my audio work, it would heat up the system so hot that the image on the screen would literally cook into the LCD panels plastic surface.
    It literally looked like you took a razor blade, and precisely carved the exact image into the surface of the screen. Pretty nasty looking. Nothing would get rid of it, and it would happen every time I did my audio editing / processing work for an hour.
    Naturally, the more work I did, the worse it got. I only got two editing sessions out of an LCD panel before having it replaced.
    After going through that for a while, I sold the system after having a fresh panel installed under warranty.
    I got tired of damaging the screen after every hour of work.
    The second iMac G5 was purchased a year later. That one also suffered permanent damage to it's LCD panel. But, not quite as noticeable.
    I know that there are a bunch of people getting ready to hit me with the "Image Persistence" explanation. But, trust me, I know about Image Persistence, and this wasn't it.
    I was seeing actual permanent screen burn-in (which is not supposed to happen on LCD panels).
    The service tech was absolutely amazed at the appearance of my screen. And, yes we verified it was the actual panel that was damaged. He wouldn't replace it without verifying that it was the panel itself.
    Anyway, I called to arrange service on the second system again, and before I could get it in there, the backlight started flickering. And, I had already had tons of other stuff fixed on the machine. So, I sold it and bailed-out.
    Now, after all the problems I've had with the built-in screens on the iMac G5 systems, I don't want another Apple product with a built-in screen. I want to use my own LCD panel.
    I have an LCD panel that I'm using now. It's about 3 years old, and only cost me $200. And, it doesn't have even the slightest indication of image burn-in or image persistence. I use it every day, and use it just like I did the iMacs.
    So, what I want now, is a machine comparable to the iMac CoreDuo, but without the built-in screen.
    The current Mac Mini's cost way too much for their very low specifications.
    I already have a Mac Mini G4. It's underpowered as well. But, no worse-off than the current Mac Minis.
    Now, if Apple produced a Mac Mini with identical specs to the iMac, I'd gladly buy it.
    Even better for them, I'd pay the same price as the current iMac to get it without the built-in monitor.
    Yes, that's right, I'd pay the full price of the iMac to get a Mac Mini without a monitor if it was of the same specifications otherwise.
    The current Mac Mini is obviously stripped-down to prevent competition with the iMac. But, I think they'd find that they would simply expand their user base if they offered a better Mini.
    With their product line as it is, the current Mac Mini is not a compelling machine, and the iMac is not an option because of it's built-in monitor.
    Get me a high-end Mac Mini and you've got a sale.

  • Sharing between Mac mini and Macbook Pro

    I have recently switched to using Macs and can't figure out my issue. I am trying to figure out how to share both my files and my internet between my mac mini and MBP at work. My mac mini is hardlined to the internet and I would like to use airport to connect my MBP to the internet. I would hope I could also share files between the two computers. Can anyone help me?

    Hi Dr. Poultry-
    This may be helpful: Mac OS: Connecting to the Internet and sharing files locally at the same time
    Luck-
    -DaddyPaycheck

  • I cant establish a connection between Mac mini and the wireless keyboard

    I just bought a Mac mini but I can't link the wireless keyboard with the Mac mini

    Same with my new mac mini.
    Got it brand new via the online shop.
    Happy to start with the new mac i really got dissapointed by the fact that it`s impossible to pair the wireless keyboard unless you first connect a USB keyboard to the mac mini and start the configuration.
    THIS ***** !!!
    No hint at all from apple that you first have to connect the USB keyboard.
    I had to borrowed a USB keyboard from my neighbour :-((
    After setting things up it was no problem at all to establish the BT connection with the keyboard.
    Works fine now.

  • Can I turn off the monitor for Mac Mini and use it as a music server?

    I am in the process of upgrading my PC most likely to a Mac product. With the non-server version of Mac OS X, can I turn off the monitor connected to a Mac Mini and use it as a streaming server? Or I have to get the server version of OS X to do that?

    I plan to run Logitech Media Server on the Mac to stream music to players. Each player interacts with the Logitech Media Server to select songs to stream. When I turn on a player, it will wake up the computer from the sleep mode.
    Currently, this Logitech Media Server runs on a Windows Vista machine and it will keep the PC from entering sleep mode while playing the songs. After I play the last song, the PC will start the idle count down and then enter into sleep mode.
    Do you see any problem with my intended use of a Mac Mini?

Maybe you are looking for

  • Differences between Oracle XE and standalone HTMLDB

    Hello, I'm developing appllication on Oracle SE with standalone HTML DB installed - that is version 2.0.0.00.49 - while there is version 2.1.0.00.39 in Oracle Express Edition. How can I synchronize (probably upgrade the older one) versions of HTMLDB/

  • Soundtrack Pro Crashes at Startup

    Please Help! I can not open Soundtrack Pro. I purchased and installed the Final Cut Studio Suite 5.1 and everything has been working fine. For some reason, though, I can't get Soundtrack Pro to open when it had been working fine up to this point. I h

  • Photosmart printer will not connect to network, unable to set IP Address Manually

    My Photosmart printer has worked fine for a long time but it now refuses to connect to the network.  It is wired into the router and I have changed the lead and this shows no chnage.  The Printer network set-up shows an IP address of 0.0.0.0 in manua

  • Unable to open RPD in Windows 8 (OBI 11.1.1.7)

    Hello All, I am unable to open RPD in Windows 8 (OBI 11.1.1.7). Just the command prompt opens up and then hangs and end up with error. [nQSError: 47077] NQSConfig.ini file was not found. Make sure your enviroment is set-up properly. I installed 32 bi

  • BADI HRPAD00INFTY - please help

    Hello all Can you please tell me what i do wrong i inplementing badi for an infotype. I want to change some fields on the screen with a PAI module. My code look's like this       CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn         EXPORTING