Can I see geotag data on iPhone / iPad in ios8

Now that iPhoto is disabled in ios8, I am viewing my photos in the Photo app, however I can't see how to view the geotag data in the Photo app.

Open the photos app and tap photos at the bottom of the screen. Tap the location for a map and the photos for dates. Without photos it's hard t explain so I included a link to the iPad User Guide for IOs 8.
iPad User Guide For iOS 8 by Apple Inc.
https://itun.es/us/5A6R2.l

Similar Messages

  • Can i get my Data from iPhone to iPad

    Can I get my data from iPhone or iPod to iPad?

    See:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • HT201317 I created a folder in my photostream on my iphone but I can not see the folder on my iPad 1.  My wife does see the folder on her iPad 3.  Is there anything I can do for my older iPad?

    I created a folder in my photostream on my iphone but I can not see the folder on my iPad 1.  My wife does see the folder on her iPad 3.  Is there anything I can do for my older iPad?

    If you created an album containing some of your photo stream photos, this will not be shared using photo stream.  If you want to share a subset of your photos, create a shared photo stream and share it with your wife, as explained here: http://help.apple.com/icloud/#mmc0cd7e99.

  • How can I see the date on my photos taken from my iPod touch

    how can I see the date on my photos taken from my iPod touch...

    The requirements for the app are:
    Requirements: Compatible with iPhone, iPod touch, and iPad.Requires iOS 5.0 or later.

  • But i cant transfer data between iphone/ipad to apple tv  any suggestions?

    so i purchased 2nd gen apple tv everthing is up to date on homesharing is on but i cant transfer data between iphone/ipad to apple tv  any suggestions?

    Welcome to the Apple Community.
    Do you mean you can't stream movies etc. You can only play media over Airplay, you can't share data from other apps.

  • How I can change regone Holliday date in iphone 5

    Hi .
    How I can change regone Holliday date in iphone 5.
    Before new up 7,1 regone date was was easy to change.
    After update by default shows SAT-SUN Hollydays . And in my regone FRI- SAT
    It's Hollydays

    Yay, the third post with the same question.
    If you go back to one of your other ones... you'll see that you need to read the Forum FAQ and provide a wee bit more information
    إذا كنت أعود إلى واحدة من تلك الأخرى الخاصة بك... سترى أن تحتاج إلى قراءة التعليمات المنتدى وتقديم معلومات أكثر قليلا وي
    John

  • My iTunes for Windows font is all italicized and I can't see any of my iphone content.  Help.

    My iTunes for Windows font is all italicized and I can't see any of my iphone content.  Help.

    Try doing a reset, no data loss.  Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • Can't see the airplay icon on iPad 3

    Can't see the airplay icon on iPad 3 and tried all options on here but still won't appear. Any suggestions.

    Hello there Phillip,
    If sounds like you updated to iOS 8.1.3 and now do not see the AirPlay icon in the Control Center. I would run through the troubleshooting and setup verification. It should get that rectified for you:
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Get i pad 4G 16 giga and i have many family photos and prived data then i will set up my business E-mail so any one can to see my data ??

    i get a prived i pad 4G 16 giga and i have many family photos and prived data then i will set up my business E-mail so any one can to see my data ??
    i have to set up an application in my company server in  so i ask about does my ipad secured ? if my college in germany ( it managment ) can to see or show any data in my i pad or not because they can make that in my blackberry mobile device and some one hacked my facebook account and opened it outside divece so please tell me about details ASAP
    <Email Edited by Host>

    Set up as New now, or set up from iCloud back up if you have this. Then you can Restore from Back Up on iTunes at a later time.

  • Final user's can not see the data due to limited authorization.

    We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location  0RT_LOCATIO.
    0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
    We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
    My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
    Does anyone how to do this (if possible)?
    Thanks in advance!

    Just do two things to find the authorization check failed for that user.
    1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
    2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
    Do this way, if it is not successful you can go for any other alternate way.
    Hope this would help you.

  • I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

    I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

    jamestait wrote:
    when I record, my previous track data keeps getting overwritten.
    since you didn't specify, are you recording in a single take?
    http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Why in SE16 we can not  see New Data Table for standard DSO

    Hi,
    We says that there is three tables (New Data Table, Active Data Table and Change Log Table) of Standard DSO, Then Why in SE16 we can not  see New Data Table of Standard DSO.
    Regards,
    Sushant

    Hi Sushant,
    It is possible to see the 3 DSO tables data in through SE16. May be you do not have authorization to see data through SE16.
    Sankar Kumar

  • ICYBOX IB-AC6031-U3 external drive enclosure USB 3.00 can't see my data!

    ICYBOX IB-AC6031-U3 external drive enclosure USB 3.00 can't see my data!
    Hello to the community,
    So indeed a pretty self-explanatory title. However you might not think so later.
    I just received the ICYBOX IB-AC6031-U3 today from ebay. (But it's a product of RaidSonic) over in Germany see link:
    www.raidsonic.de/en/products/external-cases.php?we_objectID=8887
    The problem:
    I have a large 1.5 TB seagate drive (15mm in height) which was originally in a iOmega external case (which was poor, thats another story).
    The ICYBOX IB-AC6031-U3 is an extremely portable hot swappable enclosure/caddy. (Please do see the images from the above link). However when I plug my seagate HDD into the ICY adapter, it, my Mac cannot see the data I have on it whilst using this adapter! But If I use the old one my data can be seen, see images!.
    You see in disk utility, before the above. A small dialog box giving me three options "initialize, and two others" appears, initialize takes me into disk utility. Shows as "ASMT 2105 Media" (not one of the partitions on the drive).
    Below see connected to new ICYBOX enclosure/case: (don't ask me why it inserted upside down?)
    And below using the old USB3.0 sata cable and adapter from the previous enclosure. Note that it works, my data can be seen, read and wrote. On the monitor you can see my "Data core" partition mounted!
    As you can see the above is the drive plugged in using the old adapter and cable (SATA chip + USB 3.0) from iOmega. This works no problems you can see my partitions mounted and yes they do work.
    This is disappointing as far as the  ICYBOX IB-AC6031-U3 is concerned for me. It should just work out of the box. But no it can't mount or even in anyway see my partitions that are definitely there. I want to use the ICYBOX IB-AC6031-U3 for this drive and should be able to but I cannot reformat and don't want to as this is the biggest drive a have at the moment.
    There has to be a way around this, I have contacted RaidSonic who make the adapter and await a response. I have also done some  web searching but nothing promising has turned up.
    Your input will be greatly appreciated,
    Many thanks,
    B-B

    bb-bump...

  • I can't see my child's iphone 5 (running iOS 8) in find a friend when not connected to wifi?

    I can't see my child's iphone 5 (running iOS 8) in find a friend when it's not connected to wifi?
    please help.

    Hi Wingnut01977,
    If you are having issues with Find My Friends in certain situations, you may find the following article helpful:
    iCloud: Troubleshooting Find My Friends
    Regards,
    - Brenden

  • How can i see the date of the pictures i took? help!

    how can i see the date of the pictures i took? help!

    Import them to your computer (see http://support.apple.com/kb/HT4083) and the date and other exif data will be available.

Maybe you are looking for