Can I see how long the longest entry has been in the sticky table ?
Hi,
I have a customer who has a possible issue with the sticky inactivity timeout on the CSS. At the moment we are using no timeout, just relying on the CSS to purge the entries.
However, is it possible to see how long the longest entry has been in the sticky table. I can see the 'elapsed time' with the 'show sticky' command but this only shows 100 entries per time and not in time order ?
Thanks in advance for any help
Michael,
You can use the command "show sticky-table" with L3 or L4 options, depending on what you have configured, then add ip addressing to the command, to focus down to where the oldest sticky entries are likely to be, but theres no other way. If your problem is having too many entries, configure a sticky timeout, as the default of 0 will keep then forever, or until overwritten due to the table being full. If the problem is sticky entries timing out too early, you can use the timeout parameter to increase their life, but the sticky table is limited to 32k entries.
Peter
Similar Messages
-
Can I see how long an "away" buddy has been idle also?
Hi,
Is there a way for me to see how long an "away" buddy has been idle? It's long been a feature of regular AIM but I can't figure out if it's even available in iChat. A buddy may be idle for several hours when away, and it would be convenient to be able to see both idle and away status simultaneously. Please let me know. Thanks.I can tell that wasn't helpful so here it is... Using iChat if the person simply leaves their computer (doesn't post an away message) you can then see how long they've been idle. Otherwise if they post the default Away or their own custom away message it does not additionally show their time away or idle time. I know!!! it should though (unless their is an add-on application out there, which I haven't seen one that can make this happen)... iChat doesn't show this information in this case. Sorry.
-
How can I see how many times my song has been downloaded?
I have a couple of songs for sale on iTunes and wonder if it's selling at all. Can I check?
Peter,
Workspaces and groups can be confusing - apologies that it was not clear.
Perhaps some background as to why I described it that way may help.
BeehiveOnline relies on groups to be self-sufficient - if you are in one group your world of available participants is that group and that group alone. So if you want to create a new workspace and add users they can only be drawn from that group. - hence the workspaces within a group setup. However, if you are in multiple groups then the linkage gets broken as you could add members to a workspace from different groups - if you needed many group to share a repository of read-only info for instance. This is in wide use on BeehiveOnline. Read and Write access is more of a problem as if anyone updates a document or creates one their id will be attached to it and if they are in a group you as a workspace member cannot see it will cause confusion.
So workspaces are only group restricted if there is only one group. If you have multiple groups you have more scope but have to exercise more care.
Hope that explains it.
Phil -
Is it possible to see how many hours an iMac has been "running"?
Is it possible to see how many hours an iMac has been "running"?
From the Finder, click the Apple logo at top left, choose About This Mac and then from the window that opens choose System Report.
Scroll down to the Software heading and in the System Siftware overview, you'll see Time since boot. -
My ipod touch 4th generation has frozen whilst being turned back on. The apple logo has been on the screen and ever so often the screen flashes white and then black. How do I get it to unfreeze at this stage?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have created a website/blog with Wordpress. It appears to be on a slow server because it can't be opened or takes forever to open. A representative from Wordpress told me to download Firebug to find out how long each thing takes to load on the page. I downloaded Firebug but I can't figure out how to use it. Please advise.
OK. You've kind of skipped over the reason why you want to go back five hours, but my assumption would be that you've made changes to a Pages file that you want to revert.
There are two ways to tackle this. From Pages itself, open the current version of your document, and from the File menu, click Revert To, and Browse All Versions. You'll then be in the Time Machine interface for that file, and can browse back to the version you want.
Or, outside of Pages, you can select the file (or the folder it was originally in, if you've since deleted it) and enter Time Machine from the TM menu (it sounds like you've already tried this?)
best
Matt -
The total songs in the library used to show on the bottom but now I can't figure it out! Any help is appreciated
Okay. Try the Ctrl-/ keyboard shortcut. Does that get you back your status bar down the bottom?
-
How can I see if a sent e-mail has been read?
Having moved from a PC to a MAC, in Outlook and Thunderbird I was able to get an e-mail response when an e-mail I had sent had been read. I have searched preferences within Mail but have been unable to see how to set set this up.
Roger ScottThere is no option for read receipts in Mail.app, thank heavens. There are a few scripts around which supposedly add this function but from what I have read they are unreliable and I don't know if any would work in Snow Leopard.
As an aside user of Outlook (which supports them) can disable this function so asking for one can be a waste of time. -
How can I see how many replies a thread has?
The old layout let you see how many replies a thread had. Is there any way to get that back?
To the end of the URL of a discussions page, add:
/content
...In the resulting page, click on the big Discussions tab and then bookmark that URL. Here's a screenshot: -
Is there an app for the ipad that lets you see how many times an app has been played?
looking for an app to see hoe many times the appds han been played
Sincerely,
JimI think I can refresh my question..
is there an app that can give me a small database when a specific app has been launch /played?
Jim -
Is it possible to see how many times a component has been used in our websites?
Hi,
we currently have 3 websites running and I don't know if a component we created is actually in use.
Is there a way to find this out?
Thanks,
GiulioHi kasq,
thanks for your quick answer...I tried
path=/apps/mywebsite/components/scrollable/html.jsp
and the result was
XPath query
/jcr:root/apps/upc-cablecom-ch/components/scrollable/html.jsp//*
Filtering predicates
Results
Number of hits: 1
Time: 0.16 seconds
/apps/mywebsite/components/scrollable/html.jsp/jcr:content (html, json)
So how do I have to read it? I see 1 number of hits, that I assume it's how many times it's used from other files...but how do I actually see how many times it's used on all our pages?
Sorry for this newbie question, but only now I'm getting deeper in CQ5
Thanks,
G -
I can't see my junk mail after it has been automatically removed
For a POP account I have used for years, the Junk mail folder suddenly won't show what's in it. It says I have numerous Junk mails when they arrive (the red circle number), but when I click on that mailbox folder, there is nothing there, yet I still have to manually delete the junk to get it off the server. This is only true on a silver Imac. the same account works just fine on a Macbook and several PowerPC iMacs. Anybody else have this problem, & how can I fix this?
<Edited by Moderator>I bought a new external drive two weeks ago and started using Time Machine, and that has triggered no end of problems around the same time that this started. so I finally shut it off (Time Machine, that is.) It also behaves in a really flaky way when I use Firewire to attach that drive. USB seems to work okay.
I haven't attached that drive to another computer yet. Also, my MobileMe account has screwed up my mail a few times.
I've been a Mac user since 1985, and have never had such reliability problems as in the last month. -
How to show a row has been "removed" from a table
We maintain rows in a table with a version number which will determine the current set of accounts for a version. I need to be able to show the changes between the versions - when a row was ADDED, REMOVED or there was NO CHANGE. I can work out ADDED and NO_CHANGE without any problem, but I'm not sure how I can determine that a row has been REMOVED when it no longer exists in the next version.
I have provided an example piece of SQL below:
with w_acct1 as
(select 'A1' acct, 0 vers from dual
union all
select 'A2' acct, 0 vers from dual
union all
select 'A3' acct, 0 vers from dual
union all
select 'A1' acct, 1 vers from dual
union all
select 'A2' acct, 1 vers from dual
union all
select 'A1' acct, 2 vers from dual
union all
select 'A4' acct, 2 vers from dual)
select a.*,
nvl(lead(acct) over (partition by acct order by vers desc),'NULL') ld,
case when lead(acct) over (partition by acct order by vers desc) is null then
'ADDED'
when lead(acct) over (partition by acct order by vers desc) = acct then
'NO_CHANGE'
else
'REMOVED'
end add_remove
from w_acct1 a
order by vers,acctWhich gives me the following result:
ACCT VERS LD ADD_REMOVE
A1 0 NULL NEW
A2 0 NULL NEW
A3 0 NULL NEW
A1 1 A1 NO_CHANGE
A2 1 A2 NO_CHANGE
A1 2 A1 NO_CHANGE
A4 2 NULL NEW
The result I want is:
ACCT VERS LD ADD_REMOVE
A1 0 NULL NEW
A2 0 NULL NEW
A3 0 NULL NEW
A1 1 A1 NO_CHANGE
A2 1 A2 NO_CHANGE
A3 1 NULL REMOVED
A1 2 A1 NO_CHANGE
A2 2 NULL REMOVED
A4 2 NULL NEW
Note the REMOVED rows associated with the version even though they don't exist in the dataset for that version number.
Can this be done with analytic functions or some other cool Oracle feature I'm missing?
Regards
RichardYou can't know about a row being removed unless you have a record of that row somewhere, either as a copy of your old data (see example below) or you've recorded the information using delete triggers etc.
SQL> ed
Wrote file afiedt.buf
1 with old_data as (select 1 as id, 'A' as dta from dual union all
2 select 2, 'B' from dual union all
3 select 3, 'C' from dual)
4 ,new_data as (select 1 as id, 'A' as dta from dual union all
5 select 3, 'X' from dual union all
6 select 4, 'Y' from dual)
7 --
8 ,ins_upd as (select * from new_data minus select * from old_data)
9 ,del_upd as (select * from old_data minus select * from new_data)
10 ,upd as (select id from ins_upd intersect select id from del_upd)
11 ,ins as (select id from ins_upd minus select id from upd)
12 ,del as (select id from del_upd minus select id from upd)
13 --
14 select 'Inserted' as action, null as old_id, null as old_dta, new_data.id as new_id, new_data.dta as new_dta
15 from new_data join ins on (ins.id = new_data.id)
16 union all
17 select 'Updated', old_data.id, old_data.dta, new_data.id, new_data.dta
18 from old_data join new_data on (old_data.id = new_data.id)
19 join upd on (upd.id = new_data.id)
20 union all
21 select 'Deleted', old_data.id as old_id, old_data.dta as old_dta, null as new_id, null as new_dta
22 from old_data join del on (del.id = old_data.id)
23 union all
24 select 'No Change' as action, new_data.id as old_id, new_data.dta as old_dta, new_data.id as new_id, new_data.dta as new_dta
25 from new_data where id not in (select id from ins_upd union all
26* select id from del_upd)
SQL> /
ACTION OLD_ID O NEW_ID N
Inserted 4 Y
Updated 3 C 3 X
Deleted 2 B
No Change 1 A 1 A
SQL> -
I do not see a way to close one page. I may have 3or4 different pages up but I cannot close one page with out having to close fire fox entirely. I have to go back to your icon and start all over. Thanks Dave In Austin Texas
Set the pref <b>browser.tabs.closeWindowWithLastTab</b> to false on the about:config page to prevent closing the last tab from closing the browser and make a close button appear if only one tab is open.
*http://kb.mozillazine.org/about:config
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
Where can I see, how long my garanty is yet?
can somebody help me?
If you are looking for the duration of your warranty coverage, you can check here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Maybe you are looking for
-
Hi everyone. I just bought a 15inch Macbook Pro and I've been having issues with the loops in Garageband. Let me take you through everything I have done. I got my Macbook home and I my old Mac mini to transfer its data onto my new Macbook Pro. My Mac
-
How can I use my iPad with an ethernet
I will be staying in a hotel in Japan that only has wifi with ethernet connection. I will be using my ipad (most recent gen) and don't know how to connect to wifi with it. Any advice? thanks.
-
Hi all, In my local network there is no problem for connecting thru client but when the other network thru public ip they are getting this err.. H:\>sqlplus system@dpm01 SQL*Plus: Release 9.2.0.4.0 - Production on Mon Dec 16 10:44:22 2004 Copyright Â
-
Planned delivery cost difference
dear experts, during doing MIRO for planned delivery cost. In case the real value for the delivery cost is different than the one in the PO, what is the standard way to handle this?????
-
Hi All, I have created a custom check table which also has a text tables assigned to it. I have created a Elementary Search help for the check table and the selection method for the search help is the check table itself. The issue is when I goto