Can i see the Version of a Policy in the Registry

Hello,
we plan to do an update of our Zenclients, an we are looking for a way, that we can find out the Version of the Policy, which is enforced on the Client.
Is there a way to find this out in the Registry of the Vlient?
Thx

ufrich1,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Similar Messages

Where can I see the downloads LIST when downloading podcasts, like in the older version of iTunes? I find it frustrating that I see only one at a time now ! Any suggestions please?

Where can I see the downloads LIST when downloading podcasts,
like in the older version of iTunes? I find it frustrating that I see only one
download at a time now ! Any suggestions please?

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

HT4623 Have just updated to the latest version of ios6 on my iPhone 4S and now I can't see the apps that need updating. Is showing 8 but just left with blank screen.

Have just updated to the latest version of ios6 on my iPhone 4Sand now I can't see the apps that need updating. Is showing 8 but just left with blank screen- how do I fix this?

Look for the little Flag button in the lower left corner.

Finding photoshop CC 64 bit version. I can only see the 32 bit in my downloader

finding photoshop CC 64 bit version. I can only see the 32 bit in my downloader
where is it?

it doesn't offer a choice. maybe it installs both, but the only one that's showing in the Programs list is the 32-bit.
I've worked out how to fix the problems I had - here's what I had to do:
manually find the .exe in the 64-bit Programs directory and create a shortcut to that
hack the registry so that CC is recognised as a valid "open with" program (by manually editing 'CS6' to 'CC' according to some instructions I found on another site)
delete CS6
then install my plug-ins, manually.
The whole process is way messier than it needs to be, and none of this is documented on the Adobe site.

Nyt times photo blog says latest FP version needed. I have it but can't see the pictures. HELP

I am running vista home premium and I use both internet explorer and firefox. The NYT website photo blog is called LENS and I have always been able to use it. A week or two ago I was told that I needed the latest version of flash drive to view photos. I went to the download site. got the software and loaded it. My list of program now shows Version 10 active x with flash plugins but can't see the photos. Appreciate any help

Hi, Are you using a 64bit Operating System? What version of IE are you using? Did you use the DLM(download manager) when Installing?
Thanks,
eidnolb

Can not see the device net Master Interface in my project.

Can not see the device net Master Interface in my existing project. Need to Modify exististing code. Can not recomiple and create exe file after making changes. Error says the vi's are broken. Tried re-installing industrial communications for device net but get an error saying a newer version is already installed. Do I need to plug my computer into the device net scanner to fix this?

Assume the installation disk is an OS X disk? If it's the original one that came with the system (grey-colored disk versus black retail disk) have you tried to hold the alt key down when you boot? This would allow you to choose the Apple hardware test. If you can do this, choose the Apple hardware test, click the arrow to the right, and when prompted choose the extended test. Does that give you any errors or messages about a hardware problem?
Are you able to hold the C key down when you reboot, to boot off the installation disk?

Can i see the column DATA(BLOB type) in PM_OBJECTS of DCM schema

we installed DCM managed clustering .it is Database repository type.
i am trying to see the column DATA(BLOB type) in PM_OBJECTS of DCM schema .
I wrote a program in java to read blob data type and write it into a temporary file.
when i open temporary files all the data in junk format.
can i see the real data of thatcolumn.Is it possible?
first of all for what purpose DCM shema will be used?

Hi,
There is no option to show the comments on the diagram.
We plan to add such feature in the next version.
Ivan

Question: 10gR2 database can not see the 11gR2 ASM diskgroup?

Hi there,
env:
uname -rm
2.6.18-92.1.22.el5xen x86_64
Single server(non-RAC)
note: we don't want to upgrade 10gr2 database into 11gR2 yet. But we created the 11gR2 ASM, then a 11gr2 database on ASM, and plan to migrate datafile in 10gR2 database to 11gR2 ASM
1. oracle 10gR2 installed first version: 10.2.0.3.0
2. then install 11gR2 Grid Infrastructure, and created ASM (version 11gr2)
$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Tue Oct 19 10:30:56 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> col name form a15
SQL> col COMPATIBILITY form a15
SQL> col DATABASE_COMPATIBILITY form a15
SQL> l
1* select name , STATE, COMPATIBILITY, DATABASE_COMPATIBILITY from v$asm_diskgroup
SQL> /
NAME STATE COMPATIBILITY DATABASE_COMPAT
ORCL_DATA1 MOUNTED 11.2.0.0.0 10.1.0.0.0
ORA_DATA MOUNTED 10.1.0.0.0 10.1.0.0.0
3. in 10gR2 database
sqlplus /
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Oct 19 12:12:31 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> select * from v$asm_diskgroup;
no rows selected
4. pin the node into css
# /u01/app/product/11.2.0/grid/bin/crsctl pin css -n mynodename
CRS-4000: Command Pin failed, or completed with errors.
Question: 10gR2 database can not see the 11gR2 ASM diskgroup?
please help
Thanks
Scott

What is the output of
olsnodes -t -n
Also, see unix error log and ohasd error log if you find anything in that

Hello, I'm trying to transfer my old itunes library to a new computer using home sharing. It's switched on in both computers, but I can't see the old library in the new computer. But I can see tracks from the new computer on the old one. Please help.

Apologies for poor syntax, my arm's a little sore. Yes, one computer (old) is vista, new is Windows 8. Shouldn't I be able to import the whole library using home sharing? Am I doing something wrong? Thank you in advance

I am having the same issue. I recently purchased a new laptop and I have spent the last 3 days using the home share to slowly transfer all 22,000 songs. However yesterday morning when I turned on both computers to continue the process I am having the following issue:
both computers are running the same windows OS (8)
both computers are running the same version of itunes
both computers are logged in with the same apple ID
both computers have home sharing turned on
Now however I can see the NEW computers itunes library in the drop down box on the OLD computer, however I can not see the OLD computers itunes library on the NEW computer. I can no longer see "HOME SHARES" on the drop down LIBRARY list on the new computer. I've taken the following steps to correct the error:
reset the router
completely shut down BOTH computers and brought them back up
reopened itunes
re-logged in on both PC's
re-activated both PC's with home share
The articles and help from the apple sites are worthless and it says if you can't see a library just turn home sharing off then back on - I've completed the above steps NUMEROUS times. After spending 4 days on transferring my music I really do not want to have to start over by using an external hard drive and then importing that way. I would like some help on discovering why the new laptop is no longer seeing my old library. (When it has been working up to this point)
Thanks in advance.

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?

In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.

Yea, and it's a pain to get to. What was the rational for removing the print size button? With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size. Of all the buttons you could have taken away, why not fill screen? I never use that.
Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop. The Brush preview window is unchanged in CC but in CC2014 it's basically worthless. If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc...

For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

Can't see the text!

Just installed Pages from iWork08. I start a new document, and I can't see the cursor or any text.
After I type something (maybe it's white on white?), I can highlight the text (which comes out white with a light purple background), so it's there. But I can't change the color to anything meaningful. The format bar says I'm typing black on a white background, but no matter what I do, I get (I'm guessing) white on white.
I have a version on my laptop at home that works fine. What's wrong with this picture??
Thanks,

A software update was the fix. Sorry for the confusion.

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?
When I drag the item off of the trifold that I am creating, it just disappears but I still want to use it. I just need to move it out of the way to modify other portions of the document.
thanks,
C

Add another page below the current one to use as a storage area. You can't use the grey area around the page for storing items you want to use later.
Go to the Pages Menu>Provide Pages Feedback if you would like to request this feature be added in future versions.

Airport Utility can't see the airport, nor are shares visible (Why is there no very extensive 'cookbook' on troubleshooting Airport Extremes?)

For quite a while my MBP (10.5.8) cannot see the Airport Extreme 802.11n (AE) (2nd ed) anymore when I start Airport Utility (AU) (v5.5.3). My solution was to lower security settings of the MBP to 'accept all incoming connections', knowing that this was not a nice solution. Normally I had selected 'acces for specific services and programs' (the lowest option - my AE differs in language). In the past I denied access for requests that regularly came from mDNSresponder (etc), as I could not easily find out how necessary they were. I am not sure whether Bonjour is running; I try to stick to TCP/IP (without Netbios); the same might be the case with other obscure network services...
Then I added another network drive (WD Mybooklive) that works based on shares. The installation program worked fine, I was able to set up the drive for Timemachine backups and -in the proces of upgrading to Snow leopard (I always stay one OS version behind)- my MP3 collection could be read from another drive that was connected to the AE.
I am not sure what exactly lead to the loss, but now I can not see the shares anymore in the finder. Unless I select 'connect to server' (Cmd-K) and fill in afp://ip-adres. I had some trouble with the MBP-drive and Disk Utily could not fix it in multi-user mode. Applejack-auto in single user mode finished after some repairs (catalog file and catalog hierarchy errors), but I doubt that causes the trouble.
In all cases, internetting and accessing the connected drive was no problem.
The funny thing is, my Mac Mini (10.5.8) however can see the AE with Airport Utility (different version) fine. Somehow I get the idea that the networkstack of my MBP has been messed up, but I don't know what it should be, nor how I could check it, or how to repair the stack. But maybe it is not the stack at all.
Right now, I've just reset the AE by holding the reset button for about 10 s. The name has returned to 'Base Station xx', which is visible in AU, but when I click on another button ('manual configuration' or 'continue'), first the message "Are you sure you want to connect to another wireless network?". Finally no connection appears and the error 'AU cannot find your Airport' shows up (while the Base Station is visible in the left column) - or does not show up when I refuse to switch to another network.
So, who can help me to reconnect to the Airport Extreme and/or repair the network stack?

WDS is a difficult setup for many users because it is so easy to make a mistake (while swearing that you are not).
Apple's instructions for WDS are here:
http://support.apple.com/kb/HT4262
I still think the instructions provided by Tesserax are the best available:
http://discussions.apple.com/thread.jspa?threadID=2422028&tstart=0
I can't add any more to this other than to say that long ago when I used WDS, I would swear that I had all the MAC addresses entered correctly, etc and would still have problems. So, I ask my wife to watch me and she immediately catches something like I entered a "l" (letter L) instead of a number "1", or a "O" (letter O) instead of a "0" (number zero).
Finally, there's always the possibility of device that is not holding settings...a defective device.
Hopefully, Tesserax will have some additional thoughts.

I am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

Can i see the Version of a Policy in the Registry

Similar Messages

Maybe you are looking for