Can I select multi items in slicer by touch operation in Power View sheet ?

Can I select multi items in slicer by touch operation in Power View sheet ?
I want to making presentation Power View charts by touch operation.
Mouse and Keyboard operation can select multi items in slicer by CTRL+click.
How can I do by touch-screen ?
Regards,
Yoshihiro Kawabata

In HTML5 version, you can click on the multi select button in the chart/slicer and this will allow you to select/deselect multiple items by simply clicking/touching it without CTRL+click. You can see this in action here
http://blogs.msdn.com/b/solutions/archive/2014/03/10/global-cities-in-power-bi.aspx
http://blogs.msdn.com/solutions

Similar Messages

Only getting context menus- can't select an item?

I spilled some tea on my Macbook Pro key board- cleaned it up and dried it out. Now whenever I try to select an item (mac mail, numbers, finder) only get a context menu. Can't select an item or type. Mac mail can only look at one of my mail boxes can select and open an email but can't reply because never reach body of email because of menu opening for that item.
Sorry, if not clear enough with descriptions- any help would be great.
Thank you!

It sounds as if you've encountered hardware damage due to your liquid spill. The only thing that you can do at this point is to take the machine into your local Apple Store or an AASP and have them diagnose the extent of the damage and give you an estimate for repair.
Good luck,
Clinton

How can I select an item from a list component with a seperate button

This is a repost, I decided it'd probably be better here than
in the general discussion board. I will try to delete the other
one.
Hello Everyone,
This is my first post here. I am trying to figure out how to
select an item within a list component with a button. This button
is calling a function. I have searched for the past 3 hours online
and I can't find anything about it. I thought perhaps I could set
the selectedItem parameter, but that is read only, and I believe it
returns an object reference rather than something like a number so
even if i could set it, it would be pointless. I also found a get
focus button, thought that may lead me somewhere, but I think that
is for setting which component has focus currently as far as typing
in and things like that. I am lost.
Basically I am looking for a way to type this
myList.setSelected(5); where 5 is the 5th item in the list.
Any help would be much appreciated.

Never mind found it. It is the property called selectedIndex
and it is writable

Using BT Keyboard (A1314) - Can't Select Multiple Items

Recently bought Mini and separately purchased a BT KB. When I use the command key to select multiple items, I can't. Whichever item I click on while holding the command button, it just selects that item, not the group.
Also when holding down the 'shift' key, I cannot select items in sequence. I have looked in prefs, but nothing having to do with this issue.
Anyone have any ideas?
Thanks!

Try resetting the PRAM.
Click here for instructions.

I just started up with my IPod, I download music to my library and I accidently changed the artists name in an entire category. I can't figure out how to undo it. I read the edit help stuff but I can't select the item I need to edit

I just started using my IPod and I downloaded my library. I accidently changed the artist names for an entire genre category and I can't undo it. I read all the edit help stuff and I either can't select items to edit or I'm an idiot and I can't figure it out. I keep trying and I get a pop up that asks me if I want to change multiple items.

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

Can't select desktop items with mouse...

Good day,
I am having an issue with a G4 Quicksilver workstation at my office that is running OS 10.4.10. it seems that i can not use my mouse to select any items on my desktop. i can tab through all of the items, and my mouse is able to work the menus fine, but i cannot open or even select anything that is on the desktop, including my dock. has anyone else ever heard of such a problem, and if so, is there a simple fix for it?
thanks in advance,
cr

Hi Chris,
Try reinstalling the drivers that came with the mouse.
Carolyn

Can't select multiple items with shift key os 10.7

I can use command A to select all, and I can select multiple items with command and individually clicking each one, but not using Shift and clicking on the first and last items. Any ideas?

You need to display the window in column or list view. Shift-clicking items won't do that in icon view.
(64793)

HT3819 can you select the items you don't want your family to be able to see?

I want to get some of my dad's songs he has on his ipod without buying them so i was going to try using the home sharing but i dont want to share all of my songs. Before i turn home sharing on i would like to know if i can select the items i want and don't want my family to be able to see

I really do appreciate everyone's input to my question. I guess what I wanted to do, and how it can be done aren't as simple as I had hoped. But I know what will work now. Thank you again and have a nice holiday season.

Acrobat Pro: Can't select an item

Hello,
I'm new to editing PDFs and I'm unable to select an item unless I click-and-drag a box around it. This wouldn't normally be a big problem, but the item I want to remove is below some text elements and vector drawings. I'm trying to remove the black rectangle shown in this short movie clip:
http://www.youtube.com/watch?v=O_Un6QjGqME
I'm guessing that I am just using the wrong tool, but I don't know for sure. Any ideas?
Thanks!

I go it fixed. Okay here's what you do.
Open PDF in Acrobat.
choose from Tools Edit Text and Images
Next select everything in the Illustration that's in the Black area including the Black area.
next hold down control key and click on edit in....
If you have Illustrator choose.
Now click on black area careful not to select anything else.
Hit delete. The black will disappear leaving the rest.
Save (not save as).
Quit Illustrator.
Now look to see if black area is Gone. If so save Pdf.
here is my fixed version:https://www.dropbox.com/s/jzw2z7ltxh8qiri/exampleb.pdf

Maps in OVI Suite - can't select multiple items

In Maps Updater you can or could select all the countries & provinces you wanted then start the download and come back later when it had finished. Using Maps in OVI Suite, you have to select and download each item one-by-one. I download a couple of entire countries plus about 8 individual French provinces. It's a real pain to have to keep coming back to see if one item has finished so you can select the next, especially since after each French province finishes the selection always jumps back to 'Albania' and I have to navigate back to France again. Sorry, even if you are on commission from the Albanian tourist authority, I have no plans to visit Albania for the time being!
Seriously though, is it so hard to retain the tick boxes to select all the maps and voices you want before you kick of the downloads, so you don't have to spend an hour watching progress bar and can do something more useful with your time? I just find the functional redesign baffling.
Next time I'll go back to using Maps Updater, and hope this isn't going to be entirely superseded by OVI Suite, at least until it has the multiple-choice tick-boxes!

Ovi is rubbish, all Nokia have done so far is bloat it more and more.
I don't remember how it was when I got my phone originally but I think I could just select the maps I wanted and that was it.
In this latest "update" you have to go in one by one. But my favourite is when Ovi tells you there are updated maps available and asks if you'd like to get them. You say - sure, that's nice, and it goes off and freezes your system for hours.
Several hours later you decide enough is enough and kill the Ovi process and then you find out that it didn't just start updating your maps, it decided you should have maps of the entire world! That's right, even though I only had europe on my phone it installed maps of Australia, New Zealand, North America... ffs!
Then the painful "delete all" since you can't just delete the maps you don't need, and then download them one by one.. Oh joy.
My next phone definitely won't be a Nokia.

Can't select menu items in top 25% of the browser window much of the time.

Running Windows 7 Pro on a new (2-months) HP Ultrabook with FF 15.0.1. Many times, selectable items do not work, but generally in the top 20-30% of the browser window. With the pointer hovering over selections, it does not change to indicate is a selectable item, nor will it let you select. It happens on well-known websites such as Yahoo!, HP, etc. It doesn't do this all the time, but I'd say at least 50% of the time, even if you reload the page and allow all sites with NoScript. There is no filtering warning.

That problem can be caused by an extension like the Yahoo! Toolbar or a Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode

The minimize, maximize and close buttons don't work, and I can't select any items in drop-down menus.

Running Firefox 23.01 on Windows, and two days ago I lost the ability to maximize, minimize or close windows via the buttons in the upper righthand corner. I also am unable to select a choice in dropdown menus, and for good measure I cannot x out of the About window that popped up went I wanted to check my version number!
I've looked in the support forum and seen that this is not an uncommon problem. However, I have tried every suggested solution I could find - reset Firefox several times, turned off hardware acceleration, opened in safe mode and finally uninstalled and reinstalled the program (deleting the old program folders before reinstalling as recommended - and nothing has worked.
Any help would be greatly appreciated.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Can we Select Open Item Management for Recon Accounts??

Hi Members,
Is it necessary to select check box open item management for reconciliation accounts ???
for ex; sundry debtors, sundry creditors .
If so may i know the reason.
Bcz all subledger accounts are automatically maintained as open item accounts ..so is it again necessary to select this check box in recon. accounts.
thanks and regards.

Hi
System will not allow to save with OIM selected for Recon account.
For all sub ledgers OIM will be unchecked.
VVR

I can't get multi-gestures to work with touch instruments. Why?

I have mulitgestures turned on in "settings", but in GarageBand it doesn't work correctly. When I use touch instruments I am not able to make a change tapping two or three fingers. It only works with one finger. Am I missing something here. It used to work on my old iPad.
Any help in this regard is very much appreciated!!

Ok, thanks for clarifying that for me. We have two distinctly different printing problems. Let's try tackling them one at a time if you don't mind.
In order for the iPad to print to a printer it would either have to be AirPrint-enabled or you would need another solution, like PrintCentral for iPad or Printopia. Unfortunately, I don't believe your Canon printer is AirPrint-enabled. There aren't many printers on the market that currently are. All of them, that I am aware of, are HP devices.
Now for the PC. I would go with what you have already suggested and that is try disabling either the Windows or third-party software firewall. Which version of Windows is it running? Just in case it's XP, here are two excellent iFelix articles on how to do so with or without using Bonjour.

My iPod touch will not power on. When I connect it to my PC or docking station it won't even charge. What can I do.??, My iPod touch will not power on. When I connect it to my PC or docking station it won't even charge. What can I do.??

I have my iPod touch since Christmas 2010. I was using it laast night and it went dead. I thought it must be the battery (even though I didn't get a waring like usual when the battery is about to loose power). I put it on the docking station to charge and nothing was happening. I connected it to my PC and still nothing is happening. Does anyone know what I can do???

It tells in the link.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

Can I select multi items in slicer by touch operation in Power View sheet ?

Similar Messages

Maybe you are looking for