Can I send email address, message, etc. to TB from another application via DLL

I have an application written in Omnis Studio version 4.X. It has the ability to act as a email client but only supports simple password authentication. I can get around this on the Mac by using AppleScript to send the contents of the email, to & from addresses, et. from my application to Mail. mail then acts as the mail client and processes the emails.
I'm looking for a similar solution for my Windows users. Can TB accept a DLL message from another application as a way to pass an email from Omnis to TB?
Thanks,
Mike K

No Mike, whilst it is probably possible considerable development effort would be required.
Have you looked at the[http://kb.mozillazine.org/Command_line_arguments_%28Thunderbird%29 command line switches]? perhaps they will do the job for you, but you still need to press the Send button to actually send the message.

Similar Messages

  • On my iPad I can only send email and messages to apple products.how can I send and receive from other devices other than Apple?

    On my iPad I can only send email and messages to apple products.how can I send and receive from other devices other than Apple?

    Vallakat wrote:
    On my iPad I can only send email and messages to apple products.
    There is a huge difference between sending email and sending messages.
    Yes, I believe you when you say you can only send messages to other Apple products.  The iPad is not a telephone, and therefore, it cannot text message.  It can only iMessage, which means it can send and receive messages to/from other Apple products if they are on WiFi or an iMessage capable cellular network.
    Email, however, is a whole different category.  I don't really think you can only exchange email with other Apple products only.  Make sure you have correctly identified the symptoms.

  • When can an email address be reactivated after deleted from another acount?

    May I know when can an email address be reactivated after deleted from another acount?
    I am eagar to register an email address, let's say "[email protected]"
    I created this address as an alias email in my original Apple ID + iCloud account. But that is not what I want.
    So I deleted the alias email.
    Register an new Apple ID.
    And then re-register the icloud email address "[email protected]" via the new Apple ID
    But was being rejected. And the reason was that, the address has already be picked up.
    So I would like to know when can an email address be reactivated after deleted from another account.
    Please Help !!

    You can't do what you want.
    Email aliases are forever tied to the account that created them, cannot be moved to another account, and cannot be made into a standalone account.
    See: http://support.apple.com/kb/HT4897

  • Using a wi fi not mine can't send email error message says my email address not recognised

    I am using my IPAD in UK. (friend's wi fi) from Australia
    Can receive email ok
    Have entered his Outgoing address mail.btinternet.com.
    Can't send emails.  Error message says  server does not recognize my address
    What do I do??

    Thanks for the response. Unfortunately, things have gotten progressively worse now in another direction. After I posted this, I shut down my computer to go to work. It had to "rebuild" the filevault sparseimage to recover space.
    Now when I restarted it, I am missing things from my dock, ? marks are in their place, all of my preferences have been set to some default AND this is the biggie - I have no mail accounts whatsoever. When I click on Mail, it asks me if I want to establish a new account. It looks like the FileVault action has totally screwed up my system.
    I tried rebuilding the permissions as recommended above using safe boot. Didn't help. I am now trying to repair the FileVault sparseimage as recommended elsewhere. I think I now see what the problem might be. I have two different sparseimages for the same account with the only difference is that a 1 is appended to the second one. Unfortunately I can't tell which it is. I have a feeling I should repair the 1st one (without the suffix 1). It must not be able to open that and hence that is why it made a second one.
    Any other help anyone?
    Nick

  • HT201320 Can't send email....Followed instructions from Apple......deleted account ...started acct.....message still comes "password or user name is incorrect"....still receiving email.

    Can't send email after following Apple instructions to delete acct and then start it again......Same message user name or password is incorrect????
    Running Ios7.2

    Can't send email after following Apple instructions to delete acct and then start it again......Same message user name or password is incorrect????
    Running Ios7.2

  • I've just upgraded my iPhone 5 with iOS 7. I have the problem that I can not send a photo as a iMessage directly from Photo application. Does anybody know something about that? Thanks!

    I've just upgraded my iPhone 5 with new iOS 7. I noticed that i cannot send a photo as a iMessage directly from Photo application as I could while was on iOS 6. Anybody knows something about this?

    Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
    Anything else I could try, or am I doomed!
    All of your help is much appreciated, thanks

  • How can I errase email address that i already erase from the address book

    How can I erase old email addresses that I already erase them from my contacts, and keep appearing on the "TO:" line, when I want to send an email?

    Go to Mail menu > window > Previous recipients > where you can delete previous contacts to your heart's delight.
    Then, in the same menu > window > Address panel will allow you to remove others by their places in particular groups.
    PS  Please do not post the same message more than once.   It can cause confusion.   I have mentioned your previous message to the hosts, who may remove it.

  • Can I use an iCloud email address that's been deleted from another account?

    There was one house account, mine, which is an old @mac.com address from way back in the iTools days.
    I made a couple email aliases for my daughter when she was younger to use for school.
    Now, she has her own iPhone.  I gave her another email address (hername @ att . net) so we could register her own Apple ID, and get the confirmation/activation email.
    With me so far?
    So now, in order to use the Apple bells & whistles, you need an iCloud email.  When I try to create one, it says that both the @icloud.com addresses I tried are already in use.  (Trust me, they're unique to us.)
    I made sure to delete the aliases from my main account, but I still can't use them.
    My question is:  How long will it take to release those deleted aliases for use again?  If at all.
    Off topic:  What happened to our old Support Communities login ID?  I had to use my Apple ID and now I look like a first-timer.  Is there a way to merge the old account into this one?

    I don't think that's possible.  As mentioned here: http://help.apple.com/icloud/#/mm6b1a490a, "Aliases are not transferable. Only the iCloud account that created the alias can use it.  Once you create an alias it cannot be made into its own account."
    Not sure about your second question.  You might want to post it over in the Using Apple Support Communities forum: https://discussions.apple.com/community/using_apple_support_communities?view=dis cussions.

  • I just upgraded Thunderbird and now I can't send emails: error message reads "file size too large" which is not the case

    error message reads "size of message exceeds temporary size limit of server"; The message is 1 word long so that's obviously not the problem;
    I upgraded automatically to the latest version on 7-16-14 and that's when the problem started

    The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.5.3 Your message has too many recipients. For more information regarding
    4.5.3 Google's sending limits, please visit:
    4.5.3 http://support.google.com/mail/bin/answer.py?answer=22839 u5sm10938190obv.10 - gsmtp.
    I get this message when attempting to send a message to my distribution list. Problem started today. Single recepients work okay.

  • HT1349 Can't send email...message says email was rejected by the server because it does not allo relaying

    Can't send email because message says email was rejected by the server because it does mot allow relaying?  What to do?

    Go into your SMTP outgoing mail server and enter your username and password.

  • Can't send email, upload or access ftp.

    Hello,
    I just changed my ISP to Virtua 4MB and the download speed is very good but I can't send emails with attached files, upload images and access servers via FTP.
    Help please!
    Thanks in advance.

    I just changed my ISP to Virtua 4MB and the download
    speed is very good but I can't send emails with
    attached files, upload images and access servers via
    FTP.
    Who is Virtua? Have you talked to them?

  • OBIEE 11g: Can I create/schedule/start an Agent (IBOT) from another application?

    Hello,
    I would like to schedule, with or without iBot, some reports in OBIEE 11g.
    Like BI Publisher, can I use something such webservice to schedule Report from another application, like PL/SQL?
    Many thanks, Regards.
    R.

    Yes we can schedule the reports using BI Publisher.
    Adminstration-Delivery-Email
    Mark if helps.
    Thanks,

  • I just updated my IPad to iOS 5 and now can not send email. The error message says the server rejects the address which is not true Asti sends on my desktop.

    I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?

    Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
    Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
    If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
    In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help.

  • I can't send email because it says 'message content to server failed". How do I address this? Thanks!

    I can't send email because it says 'message content to server failed". How do I address this? Thanks!

    Hello qhmv
    Check with Connection Doctor to see what is happening with connecting to your outgoing mail servers, the article below will give some insight on how to resolve the issue.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Regards,
    -Norm G

  • Thunderbird can't send email to addresses in Address Book because of formatting error

    My Thunderbird can't send email to an address picked from the Address Book. It gives the following error:
    "An error occurred while sending mail. The mail server responded: 5.1.1 <"name@telconame"@telco.com> Unknown recipient. Please check the message recipient "name@telconame"@telco.com and try again."
    You can see that Thunderbird has garbled the name/address pair: "name@telconame"@telco.com" so that it's unworkable.
    If I type the email address by hand, it sends the email OK. But it can't retrieve an address from the Address Book without garbling the name/address pair. Win 7, TBird Version 32.0; it's the same in SafeMode.
    Any ideas?

    Make two Address Book entries for him; one for each of his e-mail addresses. Make a new Address Book group and put both of his entries in it. When you send him an e-mail just type in the name of the group in the To: field.

Maybe you are looking for

  • Error while maintaing a loan type for an employee

    Hi gurus This is in regard to the Loan while maintaing for an employee through PA30 " Employee 002 is not eligible for the loan 7501 on 01.10.2008" though i tried to Maintain it for different dates still iam not able to maintain. Even i tried maintai

  • How to add a delay, sleep() doesn't seem to work

    I need to add a 1 second delay before calling a next function like [self playStop]; sleep(1); [self playGo]; But it just pause 1 second and then execute both playStop and playGo. Any idea?

  • Error : idoc xml record in segment attribute instead of SEGMENT

    hi friends can any one solve my problem. In message mapping I mapped with a IDOC. In message mapping I Mapped all the fields. Still I am getting the error as "IDOC XML RECORD IN SEGMENT ATRIBUTE INSTEAD OF SEGMENT" I dont know about this error. can a

  • I forgot my ipod pass...what do i have to do to open it ?

    I forgot my ipod pass...what do i have to do to open it ?

  • Cannot restore firmware

    I have a problem with my 2009 Macbook Pro 13". It has crashed during a firmware update, and now it won't boot but only beeps "SOS". I went to a couple of Apple Service Providers, but they could not help me restoring the firmware, the only solution se