Can I set a music for all articles of a folio?

If anybody knows,please help!

May be now is impossible,but I hope this could be supported in the future,that is very exciting!

Similar Messages

  • N97: Can you set a ringtone for all unknown caller...

    I just moved to a Nokia N97 from a Palm Treo Pro. So far so good, but one thing I cannot seem to find any information on is whether or not you can set ringtones for all unknown callers, like you can on a palm? This was one of my favorite features for palm phones.
    If you cannot set a specific ringtone for all unknown callers on the handset itself, does anyone know of an application I can download that would enable this? 
    Thanks for your time!
    Message Edited by lisadahl on 31-Aug-2009 09:48 PM

    While you're waiting for that application. You can put everyone in a group and set specific tones for each group then the default ring tone will sound when unknown people call you
    Show your appreciation. Hit that kudos button real hard

  • Can I Set View Prefs for ALL Windows?

    Is there a way in Tiger to set preferences so that ALL Finder windows ALWAYS open to a chosen view? If I want to see all windows in List View, for example, whenever a window is opened or created so that I don't have to reset windows individually, can this be done?
    G5 Dual 2.7   Mac OS X (10.4.9)  
    G5 Dual 2.7   Mac OS X (10.4.9)  

    That actually doesn't completely work. I have the same settings for my 10.4 Finder. I also have the highest level directory (ie: the boot drive) set to icon view with Brushed Metal and Sidebar turned off. However, all new folders created on the desktop always begin in Brushed Metal w/ Sidebar view. Also, folders that have been set with Brushed Metal/Sidebar turned off, open with it turned on when first navigated to via the Dock.
    In other words, open place your boot drive in the Dock. Set it to icon view with Brushed Metal and set Finder to open folders in new windows. Create a folder at the highest level of the drive. Open it to confirm it has taken the parent folder settings (in this case icon view, with Brushed Metal/Sidebar off). Close the window. Now open it via pop up menu from the drive icon in the Dock. Not only does it open in Brushed Metal Siderbar on view, but also at a different size, and sometime different Desktop location. Only when you manually turn off Brushed Metal at that point will the two versions of the open folder match when navigated to both ways.
    This behavior drives me nuts, as I tend to stay in non-Brushed Metal view, in either list or icon. I have several drives, and bop between Dock pop-up navigation, and regular old double click drilling. I'm constantly having to manually set windows to non-Brushed metal view, even after they were created with it turned off. I wish this inconsistency, and the fact that all new folders created at the Desktop begin with Brushed Metal on, were controllable system wide. However, it's been this way in OSX since as early as I can remember. So I doubt it'll ever be addressed.
    --Robb

  • Set page title for all pages

    Hi
    Can I set page title for all pages in project, by using filter or something else? Or the only way is to specify the name in each page?
    Michal

    Might be possible with filters, but that would be a rather expensive task. Just create an include file which you include in all pages. This way you also have a single point of maintenance.

  • Can I set up folders for major classifications of music as opera, country, etc. and then put all the albums with the genre into those folders folders?

    Can I set up folders for major classifications of music as opera, country, etc. and then put all the albums with the genre into those folders folders?

    Hi Richard Bugdal1,
    Welcome to the Support Communities!
    You can't change the folder structure within iTunes, but you can easily change the view to sort by Genre.
    The link below will explain how to do this:
    Apple - Find Out How - Music - iTunes
    http://www.apple.com/findouthow/music/itunes.html#tips-viewoptions
    Cheers,
    Judy

  • How can i set a layout for MIGO screen

    Hello all,
    How can i set a layout for MIGO screen. & make that layout default. Like i want to drag Requistioner column next to quantity in MIgo screen. temporarily I can drag but is there a way to save as layout & save it.

    Hi
    First you arrange however you want and then go to table settings which is there in the right corner of the item details and create a variant and save.
    Find a button with blue yellow and white at the top end above the vertical drag bar when put the cursor it will show you as Configuration.
    After creating the variant tick the check box use as standard setting below the variant
    Hope it helps
    Edited by: Girish  Adaviswamy on Mar 3, 2010 1:27 PM

  • Can I set child lock for safari on iPad?

    Can I set child lock for safari on my iPad? Is this possible?
    I have an ipad mini

    Sorry, no. What you can do is enable restrictions, which you can use to lock out all access to safari (just dont' forget the passcode you use to enable this) and then unrestrict when you want to use Safari.

  • How can I change view options for ALL playlists?

    How can I change view options for ALL playlists? With one single click or trick?
    I have a lot playlists and don't want to change every single one of them separatly.
    Thanks for your help. (I use Windows 7)

    There's no FAST way I know of, which is what I think you mean.
    Only the painful SLOW way of one-by-one.
    You could make a new playlist from the main library after you've set the columns up as you like.
    Go to an existing playlist that doesn't have the columns you want, and select all.
    RIght-click > Add to Playlist and send them to the new playlist.
    That's still one-by-one and only works with static playlists, not smart ones.

  • Can I change the settings for ALL songs in iTunes with 1 command?

    I'd like to set the volume for all songs to +100. Can I just select all songs and then change it to +100?

    Highlight all the songs in your library (ctrl+a, edit-->select all, etc.)
    Now right click one of the songs, making sure that all remain highlighted, and go to get info. Click Yes to the message that pops up. You should be able to adjust the volume in that window. Click OK when you are done. The volume should now be adjusted for all songs.
    btabz

  • How can you set a ringtone for unknown numbers

    How can you set a ringtone for unknown numbers?

    You can set up each one of your contacts with a ringtone and use the default for all other unknown numbers. There is no way to set up a ringtone for unknown numbers.

  • How can I change the duration for all clips in iMovie 10.2

    How can I change the duration for all clips in iMovie 10.2?  I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

    In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

  • Can you set different sounds for different incoming email accounts?

    Can you set different sounds for different incoming email accounts? Example, I have multiple email accounts on Mail. I would like the sound for my roadrunner account to be different from my .mac and personal website accounts. Is it possible to configure this or is there a script out there that someone knows about.
    Thanks

    You could choose None in Preferences > General > New Mail Sound and set up a rule for each account in Preferences > Rules as follows:
    If [any/all] of the following conditions are met:
    [Account] [AccountName]
    Perform the following actions:
    [Play Sound] [Sound]
    Problem is, that would cause the sound to be played for junk mail as well — probably not what you want.

  • I have subscribed to I Tunes Match on my computer where I've been syncing and backing up my I Phone.  Can I access my music before all the artwork is uploaded from my computer?

    I have subscribed to I Tunes Match on my computer where I've been syncing and backing up my I Phone.  Can I access my music before all the artwork is uploaded from my computer?

    Hi,
    You will no longer be able to sync manually with match. I would suggest that you wait until match has competed its process on your computer and that you are told how many tracks are in the cloud.
    If you activate match on your iOS device too soon, you may find that all your tracks are not there. Ps it is not just artwork that is being uploaded, it's music as well.
    Jim

  • Have iPad, iPod Touch and iPhone 4s. Can I use one charger for all

    I have and iPad, iPhone 4S and iPod 4. Can I use one charger for all 3 and if so, which one. TZ all

    You can use the iPad charger for all.

  • My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

    My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested.  How can there be audio issue for all these devices at the same time?
    As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

    Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
    I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
    What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
    Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
    Peace,
    P. Dreadie

Maybe you are looking for

  • Flash Player won't work. Tried everything I can think of.

    Right, excuse the babbling but I want to make sure I have all the details down here. I also don't know that much about computers, but I shall try. I am currently running XP on an Advent laptop which, for some reason or other, has decided that it does

  • How to set error message inside the loop...module pool

    Dear all,      Am creating Table Control without wizard. In that i am looping the values, that is, Once if i entered 5 digit values means, 12345-08... the values should be stored in z-table like this 12345,12346,12347,12348 . That is 5-8 it as to upd

  • Laptop editors any out there?

    I am in the market for a new Laptop to replace an old dual core that has treated me well for over 5 years.  My current laptop specs listed below. (not the one i am replacing.  The one I am replacing isn't worth mentioning.) HP i7q720 quad core @ 1.60

  • Problem with a example of "Developing and Using ADF Faces Skins"

    Hi, I've tried the example "Developing and Using ADF Faces Skins", but when I run the sample.jspx page and choose the skin "MyCompany" in the select skin I obtain the next message: java.lang.NullPointerException at oracle.adfinternal.view.faces.ui.la

  • Want to find function module for MB31.

    HY, <b>I WANT TO KNOW THE FUNCTION MODULE FOR THE MB31</b>, AND WHEN WE ENTER THE PRODUCTION ORDER NO IN THE 1ST SCREEN OF MB31, IT GOES TO THE 2ND SCREEN HERE WE HAVE TO PUT THE QUALITY, <b> WAT I WANT IS THAT:-</b> WHEN WE ENTER THE ORDER NO IN CO1